Answer:
a-1. Total Revenues = $838,000
a-2. Total Amortization Expense = $5,300
a-3. Total Building = $691,600
a-4. Total Depreciation Expense = $164,800
a-5. Total Additional paid in capital = $60,000
a-6. Total Customer list or Patent = $79,500
a-7. Total Cost of Goods sold = $364,000
a-8. Total Common Stock = $290,000.
a-9. Total Equipment = 398,000
b, The parent company's method is irrelevant.
c. See part c of the attached excel file for the consolidation entries that would be used on a 2021 worksheet.
Explanation:
Note: This question is not complete as requirement a of the question is not complete. This is therefore provided before answering the question as follows:
a. Determine the December 31, 2021, consolidated totals for the following accounts:
Revenues
Amortization Expense
Building
Depreciation Expense
Additional paid in capital
Customer list
Cost of Goods sold
Common Stock
Equipment
The explanation of the answers is now provided as follows:
a. Determine the December 31, 2021, consolidated totals for the listed accounts.
Note: See part a of the attached excel file for the determination of the total.
b. In requirement (a), can the consolidated totals be determined without knowing which method the parent used to account for the subsidiary?
There are no reciprocal entries required because we are not dealing with the parent's company investment account. Earnings on equity and dividends are not to be adjusted. As a result, the parent company's method is irrelevant.
c. If the parent uses the equity method, what consolidation entries would be used on a 2021 worksheet?
Note: See part c of the attached excel file for the consolidation entries that would be used on a 2021 worksheet.
Which of the following tasks is not required when using a two-stage activity-based costing model?A. Determining the cost per unit of activityB. Determining how much direct labor each cost object consumesC. Identifying activitiesD. Assigning costs to activities
Answer:
Option B
Explanation:
In simple words, Activity-based budgeting (ABC) is a better way to allocate overhead expenses. The expense of each recurrence of an overlay occurrence throughout the procedure is determined during first step of allocation. The cost of every incidence is then allocated to individual things manufactured by the company inside the second stage.
Thus, from the above we can conclude that the correct option is B.
Pick the false statement from below. Multiple Choice Expectations of lower inflation rates in the future tend to lower the slope of the term structure of interest rates. The term structure of interest rates includes both an inflation premium and an interest rate risk premium. The term structure of interest rates and the time to maturity are always directly related. The real rate of return has minimal, if any, effect on the slope of the term structure of interest rates. The interest rate risk premium increases as the time to maturity increases.
Answer: The term structure of interest rates and the time to maturity are always directly related.
Explanation:
The term structure of interest rates shows the relationship between interest rates and the different maturity periods of bonds. Normally, these move in the same direction i.e., the higher the maturity period, the higher the interest rate.
This however is not a given. It might be expected for instance that interest rates might drop in future. In such a situation, the interest might reduce with a longer maturity period which would depict an inverse relationship instead of a direct one.
Summer 20 Corp estimates overhead based on direct labor hours and has given you the following information:
Estimated Manufacturing Overhead Costs 2020 $405,000
Estimated Direct Labor Hours for 2020 220,000
Actual Direct Labor Hours for 2020 202,000
Manufacturing Overhead Account Debit Entries total $380,000
1. Determine the predetermined overhead allocation rate stated with cents.
2. Determine the amount of manufacturing overhead that was allocated.
3. Calculate the amount Summer 20 Corp is over or under allocated during the year.
Answer:
Results are below.
Explanation:
To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 405,000 / 220,000
Predetermined manufacturing overhead rate= $1.841 per DLH
Now, we can allocate overhead:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Allocated MOH= 1.841*202,000
Allocated MOH= $371,882
Finally, the over/under allocation:
Under/over applied overhead= real overhead - allocated overhead
Under/over applied overhead= 380,000 - 371,882
Underapplied overhead= $8,118
The Polishing Department of Major Company has the following production and manufacturing cost data for September. Materials are entered at the beginning of the process.
Production: Beginning inventory 1,520 units that are 100% complete as to materials and 30% complete as to conversion costs; units started during the period are 41,300; ending inventory of 7,400 units 10% complete as to conversion costs.
Manufacturing costs: Beginning inventory costs, comprised of $21,600 of materials and $12,320 of conversion costs; materials costs added in Polishing during the month, $181,795; labor and overhead applied in Polishing during the month, $127,700 and $257,740, respectively.
Compute the equivalent units of production for materials and conversion costs for the month of September
Materials Conversion Costs
The equivalent units of production enter a number of units enter a number of units
Compute the unit costs for materials and conversion costs for the month. (Round unit costs to 2 decimal places, e.g. 2.25.)
Materials Conversion Costs
Unit costs $enter a dollar amount rounded to 2 decimal places $enter a dollar amount rounded to 2 decimal places
Determine the costs to be assigned to the units transferred out and in process. (Round unit costs to 2 decimal places, e.g. 2.25 and final answers to 0 decimal places, e.g. 1,225.)
Transferred out $enter a dollar amount rounded to 0 decimal places
Ending work in process $enter a dollar amount rounded to 0 decimal places
Answer:
mucho texto xdxdxdxdxdxdxdxdx
An online gardening magazine wants to understand why its subscriber numbers have been increasing. A data analyst discovers that significantly more people subscribe when the magazine has its annual 50%-off sale. This is an example of what
Answer:
Analyzing customer buying behaviors
Explanation:
The consumer buying behavior means the action taken either online or offline by the consumer prior from purchasing the product or service. It includes the consultation made with the search engines, engaged with the post on the social media, etc
Since in the given situation, the data analyst find that when the magazine having 50% off sale so more people has subscribed
So it represent the above answer
Preparing Journal Entries for Process Costing SystemDuring its first month of operation, Portia Company purchased $90,000 of materials on account and requisitioned $64,000 of materials for use in production. The company recorded $30,000 of direct labor cost and applied $20,000 of manufacturing overhead. Prepare Portia’s journal entries to record these events.
Answer:
a.
Date Account Title Debit Credit
XX-XX-XXXX Raw materials inventory $90,000
Accounts Payable $90,000
b.
Date Account Title Debit Credit
XX-XX-XXXX Work in Process Inventory $64,000
Raw materials inventory $64,000
c.
Date Account Title Debit Credit
XX-XX-XXXX Work in Process inventory $30,000
Wages Payable $30,000
d.
Date Account Title Debit Credit
XX-XX-XXXX Work in Process Inventory $20,000
Manufacturing overhead $20,000
Develop a production plan and calculate the annual cost for a firm whose demand forecast is fall, 10,000; winter, 8,000; spring, 7,000; summer, 12,000. Inventory at the beginning of fall is 500 units.
Answer: Hello your question is incomplete attached below is the complete question
answer :
production plan ( attached below )
Total annual cost = $416,600
Explanation:
Given data of the question:
Demand forecast
Fall = 10,000 , winter = 8,000 , spring = 7,000, summer = 12,000 .
Number of workers = 30, Cost of hiring = $100,
The beginning inventory = 500, Laying cost = $200,
Inventory holding cost = $5/unit, backorder cost = $10/unit, Straight time cost = $5/hr , Overtime cost = $8/hour, productivity = 0.5 unit/worker hours
season days = 6
number of units produced by a(1) worker in 1 season = 0.5 * 8 * 60 = 240unit
∴ number of units produced by 30 workers = 240 * 6 = 7200 units
use the given data to develop a production plan using excel worksheet.
Production plan of firm ( attached below )
Total Annual cost =SUM( G12:G17 ) = ( 2000 + 4000 + 2000 + 23000 + 336,000 + 49600 ) = $416,600
Define and explain SMART?
Why do you think demand analysis is essential for businesses?
✦ ✦ ✦ Beep Boop - Blu Bot! At Your Service! Scanning Question . . .
Code: Green! Letters and Variables Received! ✦ ✦ ✦
--------------------------------------------------------------------------------------------------------------Question: Why do you think demand analysis is essential for businesses?
--------------------------------------------------------------------------------------------------------------
Answer: Demand analysis is the process of understanding the customer demand for a product or service in a target market. Companies use demand analysis techniques to determine if they can successfully enter a market and generate expected profits to expand their business operations. It also gives a better understanding of the high-demand markets for the company’s offerings, using which businesses can determine the viability of investing in each of these markets. The importance of demand analysis in the business decision is that it helps firms design their pricing policy. The Firm can choose either to lower or raise a product’s price by observing the trend of consumer demand for that product. Producers can’t fix the price for their products without first understanding the market demand for them. These are reasons why I think demand analysis is essential for businesses
-------------------------------------------------------------------------------------------------------------
The ratio of shareholders funds to total assets of the company is called?
Answer:
share holder equity
Explanation:
it indicates how much of company's assets have been generated
Isobel consumes positive quantities of both jam and juice. The price of jam is 10 cents per unit and the price of juice is 5 cents per unit. Her marginal utility of jam is 12 and her marginal utility of juice is 6.
A) Without changing her total expenditures, she could increase her utility by consuming more jam and less juice
B) Without changing her total expenditures, she could increase her utility by consuming more juice and less jam
C) Without changing her total expenditures on jam and juice, she could not increase her utility
D) She should spend more money on both jam and juice.
If two goods are perfect substitutes,
A) there is a bliss point and the indifference curves surround this point.
B) straight indifference curves have a negative slope.
C) convex indifference curves have a negative slope.
D) indifference curves have a L-shape.
The consumer is in equilibrium when
A) MRT MRS
B) Px/Py MUx/MUy.
C) the budget line is tangent to the indifference curve at the bundle chosen.
D) All of the above.
Answer:
A. Without changing her total expenditure, she could increase her utility by consuming more jam and less juice.
B. Straight line Indifference curve has negative slope.
D. All of the above.
Explanation:
Isobel can increase her total utility by consuming more of jam and less of juice. Her total expenditure will not change and therefore price of jam is 10 cents while price of juice is 5 cents. She can have more jam because marginal utility for jam is double than juice.
Tỉnh nào ở Việt Nam nhiều cao su nhất
Tỉnh nào ở Việt Nam nhiều cao su nhất?
Answer:-
Tỉnh Đông Nam Bộ có nhiều cao su nhất.
Gary Dittman, an employee of Hopkins Company, has gross earnings for the month of October of $6,000. FICA taxes are 8% of gross earnings, federal income taxes amount to $952 for the month, state income taxes are 2% of gross earnings, and authorizes voluntary deductions of $15 per month to the United Way. What is the net pay for Gary? Group of answer choices $4,442 $4,433 $4,448 $4,452
Answer:
Option b ($4,433) is the appropriate choice.
Explanation:
Given:
Gross earnings,
= $6,000
Federal income taxes,
= $952
Now,
The net pay for Gary will be:
= [tex]6000-(6000\times 10 \ percent-952-15)[/tex]
= [tex]6000-(6000\times 0.1-952-15)[/tex]
= [tex]4,433[/tex] ($)
In the Shaping Department of Jenkins Company the unit materials cost is $3.00 and the unit conversion cost is $1.80. The department transferred out 8,000 units and had 2,000 units in ending work in process 20% complete. If all materials are added at the beginning of the process, the total cost to be assigned to the ending work in process is?
Answer:
$6,720
Explanation:
Calculation to determine what the total cost to be assigned to the ending work in process is
First step
Materials cost=2000 units * 100%
Materials cost=2,000
Conversion costs=2000 units *20%
Conversion costs= 400
Now let determine the ending work in process
Ending work in process=(2000 units *$3.00 per unit)+(400 units *$1.80 per unit)
Ending work in process= $6,000+$720
Ending work in process=$6,720
Therefore the total cost to be assigned to the ending work in process is $6,720
You have just deposited $9,000 into an account that promises to pay you an annual interest rate of 6.1 percent each year for the next 7 years. You will leave the money invested in the account and 15 years from today, you need to have $25,650 in the account. What annual interest rate must you earn over the last 8 years to accomplish this goal
Answer:
Annual interest rate = 8.23%
Explanation:
The annual interest rate i must have earn over the last 8 years to accomplish this goal is:
= ((25650/(9000*(1+6.1%)^7))^(1/8))-1
= ((25650/(9000*1.513588))^(1/8)) - 1
= ((25650/13622.29)^(1/8) - 1
= 1.882943323038931^(1/8) - 1
= 1.08231743862 - 1
= 0.08231743862
= 8.231743862%
= 8.23%
The government has the ability to influence the level of output in the short run using monetary and fiscal policy. There is some disagreement as to whether the government should attempt to stabilize the economy. Which of the following are arguments in favor of active stabilization policy by the government?
a. Shifts in aggregate demand are often the result of waves of pessimism or optimism among consumers and businesses.
b. The current tax system acts as an automatic stabilizer.
c. Businesses make investment plans many month in advance.
d. The Fed can effectively respond to excessive pessimism by expanding the money supply and lowering interest rates.
Hot and Cold has annual sales of $950,000, annual depreciation of $125,000, and net working capital of $243,000. The tax rate is 40 percent and the profit margin is 8 percent. The firm has no interest expense. What is the amount of the operating cash flow?
Answer:
$201,000
Explanation:
Calculation to determine the amount of the operating cash flow
Using this formula
OCF=(Annual sales*Profit margin )+Annual depreciation
Let plug in the formula
OCF = ($950,000*.08)+ $125,000
OCF=$76,000+$125,000
OCF=$201,000
Therefore the amount of the operating cash flow is $201,000
Anna works on an assembly line where it takes her 20 minutes to produce 150 units of a product needed to fill a container. It takes her an additional 5 minutes to transport the container to Josh, who works at the next station. The company uses a safety stock of 20%. The current assembly line uses 5 kanbans between Anna’s and Josh’s stations. What is the demand for the product? Calculate the answer in units per minute. Calculate in Excel and round down to the nearest whole number.
Answer:
Hence the demand for the product D = 25 units per min.
Explanation:
Units produced (C) = 150
Time for production = 20 min
Time for transport = 5 min
Total time (T) = 20 + 5 = 25 min
Safety stock (S) = 20%
Number of Kanban (y) = 5
Demand unit per min = D
[tex]y = D*T*(1+x)/C\\5 = D*25*(1+0.2)/150\\30 = D*1.2\\D = 30/12*10[/tex]
D= 25 units per min.
Gideon Company uses the allowance method of accounting for uncollectible accounts. On May 3, the Gideon Company wrote off the $2,000 uncollectible account of its customer, A Hopkins. The entry or entries Gideon makes to record the write off of the account on May 3 is:________.
a. Accounts Receivable. A-Hopkins 2000
Allowance for Doubtful Accounts 2000
b. Allowance for Doubtful Accounts 2000
Bad debts expense 2000
c. Accounts Receivable A-hopkins 2000
Bad debts expense 2000
d. Accounts Receivable A Hopkins 2000
Allowance for Doubtful Accounts 2000
e. Allowance for Doubtful Accounts 2000
Accounts receivables A-Hopkins 2000
Answer:
e. Debit Allowance for Doubtful Accounts $2,000
Credit Accounts receivables A-Hopkins $2,000
Explanation:
When a company use the allowance method of accounting for uncollectible accounts, the company would actively review and book bad debt expenses for any debt in doubt of collection. The entry would be; Debit Bad debt expenses, Credit Allowance for doubtful debt
However, where there is sufficient evidence that these debts goes into default, no more expenses would be recorded , instead
Dr. Allowance for doubtful debt $2,000
Cr. Account receivable $2,000
(To record written off receivables)
Kubin Company’s relevant range of production is 30,000 to 35,000 units. When it produces and sells 32,500 units, its average costs per unit are as follows: Average Cost per Unit Direct materials $ 9.00 Direct labor $ 6.00 Variable manufacturing overhead $ 3.50 Fixed manufacturing overhead $ 7.00 Fixed selling expense $ 5.50 Fixed administrative expense $ 4.50 Sales commissions $ 3.00 Variable administrative expense $ 2.50 Required: 1. For financial accounting purposes, what is the total amount of product costs incurred to make 32,500 units? 2. For financial accounting purposes, what is the total amount of period costs incurred to sell 32,500 units? 3. For financial accounting purposes, what is the total amount of product costs incurred to make 35,000 units? 4. For financial accounting purposes, what is the total amount of period costs incurred to sell 30,000 units? (For all requirements, do not round intermediate calculations.)
Answer:
Kubin Company
1. Total amount of product costs incurred to make 32,500 units:
= $846,250
2. The total amount of period costs incurred to sell 32,500 units:
= $290,000
3. The total amount of products costs incurred to make 35,000 units:
= $892,500
4. The total amount of period costs incurred to sell 30,000 units:
= $282,500
Explanation:
a) Data and Calculations:
Relevant production range = 30,000 to 35,000 units
Actual production and sales = 32,500 units
Average Costs per Unit:
Direct materials $ 9.00
Direct labor $ 6.00
Variable manufacturing overhead $ 3.50
Fixed manufacturing overhead $ 7.00 $25.50
Fixed selling expense $ 5.50
Fixed administrative expense $ 4.50
Sales commissions $ 3.00
Variable administrative expense $ 2.50
1. Total amount of product costs incurred to make 32,500 units:
Direct materials $ 9.00
Direct labor $ 6.00
Variable manufacturing overhead $ 3.50
Fixed manufacturing overhead $ 7.00
Total product cost per unit $25.50
Total product costs:
Variable costs = $601,250 ($18.50 * 32,500)
Fixed costs = 245,000 ($7.00 * 35,000)
Total product = $846,250
2. The total amount of period costs incurred to sell 32,500 units:
Fixed selling expense $ 5.50 * 35,000 = $192,500
Sales commissions $ 3.00 * 32,500 = 97,500
Total period costs = $290,000
3. The total amount of products costs incurred to make 35,000 units:
= $892,500 (35,000 * $25.50)
4. The total amount of period costs incurred to sell 30,000 units:
Fixed selling expense $ 5.50 * 35,000 = $192,500
Sales commissions $ 3.00 * 30,000 = 90,000
Total period costs = $282,500
Identify the financial instruments based on the following descriptions.
a. Backed by the US government, these financial instruments are fixed-rate debt securities with a maturity of more than one year. They are considered default free but are subject to interest rate risk.
b. Issued by corporations, these unsecured debt instruments are used to fund corporate short-term financing requirements. If issued by a financially strong company, they have less risk.
c. These financial instruments are investment pools that buy such short-term debt instruments as Treasury bills (T-bills), certificates Of deposit (CDs), and commercial paper. They can be easily liquidated.
d. These financial instruments are contractual agreements that give one party a long-term agreement to use an asset by providing regular payments.
Answer:
The solution to the given point can be defined as follows:
Explanation:
For point a:
TREASURY NOTE: For further than a year, Treasury notes were issued for the federal reserves.
For point b:
COMMERCIAL PAPER: Brief securities mostly on corporate debt Sar financial markets.
For point c:
MONEY MARKET MUTUAL FUND: In short-term assets, the Financial Market Fund invests.
For point d:
PREFERENCE SHARES: Preferred shareholders are much more divergent than owners, and less than the shareholders were dealt with.
On September 30, 2018, the San Fillipo Corporation issued 8% stated rate bonds with a face amount of $280 million. The bonds mature on September 30, 2038 (20 years). The market rate of interest for similar bonds was 10%. Interest is paid semiannually on March 31 and September 30. ((FV of $1, PV of $1, FVA of $1, PVA of $1, FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.)
Required:
Determine the price of the bonds on September 30, 2018. (Enter your answers in whole dollars. Round your final answers to nearest whole dollar amount.)
Table values are based on: 40 5% Amount Present Value Cash Flow Interest Principal Price of bonds $ 220,000,000
Answer:
the price of the bond is $231,955,808
Explanation:
The computation of the price of the bond is shown below:
= Interest + principal
= ($280,000,000 × 8% × 6 months ÷ 12 months) × PVIFA factor at 5% for 40 years + ($280,000,000 × PVF factor at 5% for 40 years)
= 192,181,808+ $39,774,000
= $231,955,808
hence, the price of the bond is $231,955,808
Bengal Co. provides the following sales forecast for the next three months: JulyAugustSeptember Sales units 8,500 9,200 5,950 The company wants to end each month with ending finished goods inventory equal to 20% of the next month's sales. Finished goods inventory on June 30 is 1,700 units. The budgeted production units for August are:
Answer:
Production= 8,550
Explanation:
Giving the following information:
Sales units 8,500 9,200 5,950
Desired ending inventory= 20% of the next month's sales.
To calculate the production for August, we need to use the following formula:
Production= sales + desired ending inventory - beginning inventory
Production= 9,200 + (5,950*0.2) - (9,200*0.2)
Production= 9,200 + 1,190 - 1,840
Production= 8,550
Suppose a commercial banking system has $40,000 of outstanding checkable deposits and actual reserves of $4,500. If the reserve ratio is 10 percent, the banking system can expand the supply of money by the maximum amount of
Answer: $50000
Explanation:
Based on the information that's been given in the question, firstly we need to calculate the excess reserves which will be:
= $4500 - (10% × $40000)
= $4500 - $4000
= $500
Then, the money supply that's expanded will be:
= Excess reserve / Reserve ratio
= $5000 / 10%
= $5000 / 0.1
= $50000
Therefore, the answer is $50,000.
A metal fabrication company is buying a CNC machine for $600,000. After 20 years of use, the machine should have a salvage value of $35,000.
Required:
a. Under 100% bonus depreciation, what depreciation can be claimed in year 1?
b. Under 100% bonus depreciation, what depreciation can be claimed in year 2?
Answer:
100% Bonus Depreciation:
a. Year 1 = $565,000
b. Year 2 = $0
Explanation:
a) Data and Calculations:
Cost of CNC Machine = $600,000
Salvage value = $35,000
Depreciable amount = $565,000 ($600,000 - $35,000)
100% Bonus Depreciation:
Year 1 = $565,000
Year 2 = $0
b) The 100% bonus depreciation is not limited to the firm's taxable income. The firm can carry back loss arising from 100% bonus depreciation to previous year's income and also carry any unused loss forward to deduct against future income.
Human capital refers to: a. the value that the firm's workforce contributes to each product produced or service rendered. b. the net present value of the future competencies of the workforce. c. the amount of money purchasers of the firm would pay for the continuing employment of the present workforce. d. knowledge and skills of a firm's entire workforce.
Answer:
D
Explanation:
Human capital is an example of an intangible asset. It is the economic value attached to labours' skills and expertise.
Types of Human Capital include :
(1) Knowledge Capital
(2) Social Capital
(3) Emotional Capital.
Qualities of human capital includes
• Education.
• on-the-job training.
• Hard work
• experience
• Mental and emotional well-being.
• People management.
• Communication skills.
From the standpoint of the issuing company, a disadvantage of using bonds as a means of long-term financing is that Group of answer choices bond interest is deductible for tax purposes. interest must be paid on a periodic basis regardless of earnings. income to stockholders may increase as a result of trading on the equity. the bondholders do not have voting rights.
Answer:
interest must be paid on a periodic basis regardless of earnings.
Explanation:
A bond can be defined as a debt or fixed investment security, in which a bondholder (investor or creditor) loans an amount of money to the bond issuer (government or corporations) for a specific period of time. The bond issuer are expected to return the principal (face value) at maturity with an agreed upon interest (coupon), which are paid at fixed intervals.
The disadvantages of bonds are listed below as;
1. Bonds can decrease a person's return on equity.
2. Bonds require a payment of the principal amount.
3. Bonds typically require a payment of periodic interest.
Generally, most bonds with shorter maturity time respond less dramatically to changes in interest rates when compared to bonds having longer maturity. Thus, the risk associated with short bonds isn't really significant because their interest rates are less likely to change substantially within that short period of time unlike bonds with longer maturity.
Hence, regardless of the earnings by bondholders, interest must be paid on a periodic basis on a long-term bond.
Aptitude is defined as the ability to _____. learn several different jobs learn a particular kind of job get a job get fired from a job
Gamble Corporation had beginning inventory $100,000, cost of goods purchased $700,000, and ending inventory $140,000. What was Gamble's inventory turnover? Group of answer choices 5 times. 5.5 times. 5.83 times. 6.6 times.
Answer:
5.83 times
Explanation:
The computation of the Gamble's inventory turnover is given below:
As we know that
Inventory turnover = Cost of goods sold ÷ (ending inventory + opening inventory) ÷ 2
= $700,000 ÷ ($140,000 + $100,000) ÷ 2
= $700,000 ÷ $120,000
= 5.83 times
A large bakery buys flour in 25-pound bags. The bakery uses an average of 1,215 bags a year. Preparing an order and receiving a shipment of flour involves a cost of $10 per order. Annual carrying costs are $75 per bag.
Required:
a. Determine the economic order quantity. (Round your final answer to the nearest whole number.) Economic order quantity bags
b. What is the average number of bags on hand? (Round your final answer to the nearest whole number.) Average number of bags
c. How many orders per year will there be? (Round your final answer to the nearest whole number.) Number of orders per year
d. Compute the total cost of ordering and carrying flour.
Answer and Explanation:
The computation is shown below
a. The economic order quantity is
= sqrt ((2 × annual demand × ordering cost) ÷ carrying cost)
= sqrt ((2 × 1,215 × $10) ÷ $75)
= 18 units
b) Average number of bags on hand is
= EOQ ÷ 2
= 18 ÷ 2
= 9
c) Orders per year is
= D ÷ EOQ
= 1215 ÷ 18
= 67.5
= 68
d) Total cost = Total carrying cost+ Total ordering cost
= (Q ÷ 2)H +(D ÷ Q)S
= (18 ÷ 2)75 + (1215 ÷ 18) × 10
= 675 + 675
= $1350