The heat released when 1. 00 g of ethanol (mr = 46. 0) undergoes complete combustion is 29. 8 kj what is the heat released by each molecule, in joules, when ethanol undergoes complete combustion?.

The atomic mass of Barium sulfate (BaSO4) is 233.39 g/mol.

The atomic mass of BaSO4 can be calculated by adding up the atomic masses of its constituent atoms. BaSO4 is composed of one barium atom (Ba), one sulfur atom (S), and four oxygen atoms (O).

The atomic mass of barium (Ba) is 137.33 g/mol, the atomic mass of sulfur (S) is 32.06 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol.

To calculate the atomic mass of BaSO4, we need to multiply the atomic mass of each element by the number of atoms present in the molecule, then add them up.

 Atomic mass of BaSO4 = (1 x atomic mass of Ba) + (1 x atomic mass of S) + (4 x atomic mass of O)

Atomic mass of BaSO4

= (1 x 137.33 g/mol) + (1 x 32.06 g/mol) + (4 x 16.00 g/mol)

Atomic mass of BaSO4 = 137.33 g/mol + 32.06 g/mol + 64.00 g/mol

Atomic mass of BaSO4 = 233.39 g/mol

To learn more about atomic mass :

https://brainly.com/question/30390726

#SPJ4

A minimum of 2 square feet (ft2) should be left open near the floor and 2 ft2 should be left open towards the ceiling. RCP- 200V 200,000 Reddy Heater Ample ventilation should be provided. Allow at least 6 feet2 of fresh outside air before using the heater.

To learn more about propane heater refer to:

https://brainly.com/question/12523080

#SPJ4

The percent by mass of CsCl in the 0.711 M CsCl solution with a density of 1.091 g/mL is approximately 10.96%.

To calculate the percent by mass of CsCl in a solution, we need to know the mass of CsCl and the total mass of the solution. We can calculate the mass of CsCl using its molarity and the volume of the solution. Then, we can calculate the total mass of the solution using its density and volume.

Given:

Molarity of CsCl solution = 0.711 M

Density of CsCl solution = 1.091 g/mL

To calculate the mass of CsCl in 1 L of the solution, we can use its molarity:

1 L solution × 0.711 mol CsCl/L solution × 168.36 g CsCl/mol = 119.7 g CsCl

To calculate the mass of CsCl in the actual solution, we can use the density and the volume of the solution. Let's assume we have 1000 g (or 1 L) of the solution:

Mass of solution = Volume × Density = 1 L × 1.091 g/mL = 1091 g

So, the mass of CsCl in the solution is 119.7 g, and the total mass of the solution is 1091 g.

The percent by mass of CsCl in the solution is:

% by mass = (mass of CsCl / mass of solution) × 100%

= (119.7 g / 1091 g) × 100%

= 10.96%

Therefore, the percent by mass of CsCl in the 0.711 M CsCl solution with a density of 1.091 g/mL is approximately 10.96%.

Find  more about mass of CsCl

brainly.com/question/9946306

#SPJ4

The molar mass of potassium permanganate is approximately equal to 158.04 g/mol.

By summing the atomic masses of its constituent elements, the molar mass of potassium permanganate (KMnO4) may be computed.

Each element in KMnO4 has the following atomic masses:

Potassium (K) content: 39.10 g/mol

Manganese (Mn) content: 54.94 g/mol

Oxygen (O) : 15.99 g/mol (there are four oxygen atoms in KMnO4)

As a result, the molar mass of potassium permanganate may be computed as follows:

Molar mass of KMnO4 = (1 x  atomic mass of K) + (1 x  atomic mass of Mn) + (4 x  atomic mass of O) 

= (1 x 39.10 g/mol) + (1 x 54.94 g/mol) + (4 x 15.99 g/mol)

= 39.10 g/mol + 54.94 g/mol + 63.96 g/mol

= 158.04 g/mol

For more such questions on molar mass, click on:

https://brainly.com/question/24191825

#SPJ4

It will take 9 passes for the robot vacuum to remove 430 ml of dirt, leaving 100 ml of dirt on the floor.

Each pass removes 22% of the dirt, so the amount of dirt remaining after each pass is 78% of the previous amount. We can use this information to calculate the amount of dirt remaining after each pass and find out how many passes it takes to reach 100 ml.

Pass 1: 530 ml * 0.78 = 410.4 ml

Pass 2: 410.4 ml * 0.78 = 320.52 ml

Pass 3: 320.52 ml * 0.78 = 249.89 ml

...

Pass 9: 100.11 ml * 0.78 = 78.08 ml

So it will take 9 passes for the robot vacuum to remove 430 ml of dirt, leaving 100 ml of dirt on the floor.

Learn more about Simple Maths:

https://brainly.com/question/13442477

#SPJ4

The Lewis structure for O₂, or oxygen gas, is a double bond between two oxygen atoms, each with two lone pairs of electrons. Here is the Lewis structure for O₂:

    O = O      [.. represents lone pair]
    ..      ..


Each oxygen atom is represented by the letter "O" and the double bond is represented by the "=" symbol. The two lone pairs of electrons on each oxygen atom are represented by the two dots on either side of the "O".

In a Lewis structure, the goal is to have each atom have a full outer shell of electrons. For oxygen, that means having 8 electrons in its outer shell.

In the O₂ Lewis structure, each oxygen atom has 6 electrons in its outer shell (2 from the double bond and 4 from the lone pairs) and shares 2 electrons with the other oxygen atom, giving it a full outer shell of 8 electrons.

Overall, the Lewis structure for O₂ accurately represents the bonding and electron distribution in the molecule.

To know more about Lewis structure here:

https://brainly.com/question/20300458#

#SPJ11

The van't Hoff factor, i, is a measure of the degree of dissociation of a solute in a solution.

It is defined as the ratio of the number of particles produced when a solute molecule dissolves in a solvent, to the number of solute molecules in the undissolved state. In the case of an aqueous solution of hydrofluoric acid (HF), if 0% ionization is assumed, then no dissociation of the solute has taken place, and the van't Hoff factor, i, would be equal to 1.

This means that for every molecule of hydrofluoric acid that is dissolved in water, only one particle (the molecule) is produced, and the solution remains a single-component solution.

It is worth noting that hydrofluoric acid is a weak acid and does undergo some degree of ionization in aqueous solution, so in reality, the van't Hoff factor would be greater than 1, but the exact value would depend on the concentration of the acid and the conditions of the solution.

Learn more about aqueous solution of hf:

https://brainly.com/question/27548795

#SPJ4

False. A gas is not considered "ideal" if one mole of it in a 22.4-liter container exerts a pressure of exactly 1 atm at room temperature

An ideal gas is a theoretical gas composed of particles with negligible volume and no intermolecular forces. It is an idealization because real gases do have volume and intermolecular forces, but the behavior of many gases approximates that of an ideal gas under certain conditions.

The statement "one mole of it in a 22.4-liter container exerts a pressure of exactly 1 atm at room temperature" is a reference to the Standard Temperature and Pressure (STP) conditions, which are defined as 0 degrees Celsius (273.15 K) and 1 atm pressure. At STP, one mole of an ideal gas occupies 22.4 liters of volume.

However, it is important to note that ideal gas behavior is not limited to STP conditions. At other temperatures and pressures, many gases behave approximately like an ideal gas. The ideal gas law, PV=nRT, is a useful approximation for predicting the behavior of gases over a wide range of conditions.

In summary, an ideal gas is not defined solely by its behavior at STP, but rather by its theoretical properties of negligible volume and no intermolecular forces.

Learn more about ideal gas here:

https://brainly.com/question/28257995

#SPJ4

A limiting reactant is the reactant in a chemical reaction that determines how much of the products can be made. It is the reactant that is used up first and limits the amount of product that can be produced.

For example, consider the reaction between hydrogen gas (H₂) and oxygen gas (O₂) to produce water (H₂O):
2 H₂ + O₂ → 2 H₂O

In this reaction, the ratio of hydrogen to oxygen is 2:1. This means that for every 2 molecules of hydrogen, we need 1 molecule of oxygen to produce 2 molecules of water.

If we have 4 molecules of hydrogen and 2 molecules of oxygen, we have enough of both reactants to produce 4 molecules of water. However, if we have 4 molecules of hydrogen and only 1 molecule of oxygen, we can only produce 2 molecules of water. In this case, oxygen is the limiting reactant because it is used up first and limits the amount of water that can be produced.

To know more about limiting reactant here:

https://brainly.com/question/14225536#

#SPJ11

The molecular mass of a potassium nitrate molecule, KNO₃ is equals to the 101.098 g/mol.

We have a potassium nitrate molecule, KNO₃. It consists one atom of potassium, one atom of nitrogen and three atoms of oxygen. Molecular mass of a molecule is the sum of the masses of the individual atoms within the quantities present in a molecule. So, the molecular mass of KNO₃, is sum of individual masses of oxygen, nitrogen and potassium atoms with number of their atoms. The atomic mass of oxygen atom, O = 16 g/mol

The atomic mass of potassium atom, K = 39.098 g/mol

The atomic mass of nitrogen atom, N

= 14 g/mol

Now, Molecular mass of KNO₃ = 1× atomic mass of potassium + 1×atomic mass of Nitrogen + 3× atomic mass of oxygen atom

= 1×K + 1×N + 3×O

= 1×39.098 g/mol + 1×14 g/mol + 3×16 g/mol

= 39.098 g/mol + 14 g/mol + 48 g/mol

= 101.098 g/mol

Hence, the molecular mass of KNO₃ is 101.098 g/mol.

For more information about Molecular mass, visit :

https://brainly.com/question/24191825

#SPJ4

To neutralize 35.00 mL of 0.0500 M nitric acid, 43.75 mL of 0.0200 M calcium hydroxide would be needed.

The Mole Ratio, which is obtained from the coefficients of the compounds in a balanced equation, is a conversion factor between compounds in a chemical process. So, in a chemical process, the mole ratio is employed to convert between quantities of substances.

From the equation of the reaction:

[tex]$\mathrm{Ca}(\mathrm{OH})_2+2 \mathrm{HNO}_3\rightarrow\mathrm{Ca}\left(\mathrm{NO}_3\right)_2+2 \mathrm{H}_2 \mathrm{O}$[/tex]

The mole ratio of calcium hydroxide to nitric acid is 1 : 2.

Mole of nitric acid = molarity × volume

substitute the values in the above equation, we get

= 0.0500 × 35.00/1000

simplifying the equation, we get

= 0.00175

The mole of the calcium hydroxide can be calculated as:

0.00175/2 = 0.000875

Volume of calcium hydroxide = mole/molarity

substitute the values in the above equation, we get

= 0.000875/0.0200

simplifying the equation, we get

= 0.04375 L

= 43.75 mL

Therefore, the correct answer is 43.75 mL.

To learn more about mole ratio refer to:

https://brainly.com/question/892732

#SPJ4

The chemical names of H₂O includes Oxidane, Dihydrogen oxide etc.

Water's chemical name is dihydrogen oxide. It originated as the ions H and OH in water, which means that H is hydrogen and OH is oxide. Hence, by combining names, you will obtain dihydrogen monoxide, but as it is a hoax, although being technically accurate, it is not commonly utilized. Oxidane and hydrogen oxide go by other names.

Hydrogen and oxygen make up the elements of water. Water has the chemical formula H₂O because it contains two hydrogen atoms and one oxygen atom. Dihydrogen oxide is the name given to water in chemical terms.

To know more about water, visit,

https://brainly.com/question/1313076

#SPJ4

The reaction exists as follows:

Reducing Sugar + Benedict's Solution → Brick-red Precipitate + Oxidized Benedict's Solution

A straightforward chemistry test called Benedict's test is performed to find reducing sugars. Carbohydrates known as reducing sugars have a free aldehyde or ketone functional group in their chemical structure. They include both disaccharides like lactose and maltose and monosaccharides like glucose and fructose.

Benedict's solution will react by creating a brick-red precipitate when a sample contains a very high concentration of reducing sugar.

This precipitate's existence signifies a successful test and demonstrates that the sample has a sizable concentration of reducing sugar. The reducing sugar is oxidized in this reaction, which is an example of an oxidation-reduction reaction, and Benedict's solution is reduced.

The reaction exists as follows:

Reducing Sugar + Benedict's Solution → Brick-red Precipitate + Oxidized Benedict's Solution

Therefore, the correct answer is option b. Brick-red precipitate is formed.

To learn more about Benedict's Solution refer to:

https://brainly.com/question/3653912

#SPJ4

The reaction exists as follows:

Reducing Sugar + Benedict's Solution → Brick-red Precipitate + Oxidized Benedict's Solution

To identify reducing sugars, a simple chemistry test known as Benedict's test is used. The chemical structure of the carbohydrates referred to as reducing sugars contains a free aldehyde or ketone functional group. They consist of monosaccharides like glucose and fructose as well as disaccharides like lactose and maltose.

When a sample has a very high concentration of reducing sugar, Benedict's solution will react and produce a brick-red precipitate.

The presence of this precipitate indicates that the test was successful and shows that the sample contains a significant amount of reducing sugar. In this reaction, which is an illustration of an oxidation-reduction reaction, the reducing sugar is oxidised and Benedict's solution is reduced.

Reducing Sugar + Benedict's Solution → Brick-red Precipitate + Oxidized Benedict's Solution

Therefore, the correct answer is option b. Brick-red precipitate is formed.

To learn more about Benedict's Solution refer to:

brainly.com/question/3653912

#SPJ4

When a molecule combines with other chemicals in the presence of sunshine, NOx, it creates photochemical smog in the troposphere.

To learn more about photochemical refer to:

https://brainly.com/question/28504426

#SPJ4

The partial pressures for each noble gas are: 0.540 atm for He, 0.2932 for Ne, and 0.1648 for Kr.

Dalton’s Law of Partial Pressure states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the individual component gases. In other words, partial pressure also can be described as if a container filled with more than one gas, each gas exerts pressure. The pressure of any gas within the container is called its partial pressure.

So, according to Dalton’s Law of Partial Pressure:

Ptotal = P(He) + P(Ne) + P(Kr)

Then, from the formula above we get the equations:

P(He) = X(He) * Ptotal; P(Ne) = X(Ne) * Ptotal; P(Kr) = X(Kr) * Ptotal

X(He) = n(He)/ntotal, X(Ne) = n(Ne)/ntotal, X(Kr) = n(Kr)/ntotal

So, the formula will be:

ntotal = n(He) + n(Ne) + n(Kr)

Now, we need to find the amount of each substance:

n = m/M

n(He) = 5.50g / 4.003g/mole = 1.374 mol

n(Ne) = 15.0g / 20.18g/mole = 0.7433 mol

n(Kr) = 35.0g / 83.80g/mole = 0.4177 mol

So, we got the total as:

ntotal = 1.374 mol + 0.7433 mol + 0.4177 mol = 2.535 mol

Now, we calculate the partial pressures by substituting the value of each subtance into the formula:

P(He) = X(He) * Ptotal = (1.374mol / 2.535mol) * (1 atm) = 0.5420 atm

P(Ne) = X(Ne) * Ptotal = (0.7433mol / 2.535mol) * (1 atm) = 0.2932 atm

P(Kr) = X(Kr) * Ptotal = (0.4177mol / 2.535mol) * (1 atm) = 0.1648 atm

Hence, the partial pressures are 0.540 atm for He, 0.2932 atm for Ne, and 0.1648 atm for Kr.

Learn more about partial pressures at: https://brainly.com/question/14281129

#SPJ4

BrF₅ is a polar molecule.

The interhalogen compound and bromine fluoride known as bromine pentafluoride (BrF₅). It has a high fluorinating capacity. Analysis of oxygen isotopes makes use of BrF₅.

BrF₅ is a polar molecule because it has an asymmetrical distribution of charge, with the bromine atom at the center being more electronegative than the fluorine atoms surrounding it.

This creates a dipole moment, which makes the molecule polar. The shape of  is also important in determining its polarity. It has a square pyramidal shape, which contributes to its asymmetrical charge distribution.

In contrast, a nonpolar molecule would have a symmetrical distribution of charge and no dipole moment.

To know more about polarity here:

https://brainly.com/question/3184550#

#SPJ11

At STP one mole of a gas contains 22.41 liters. Here, 36.05  g or 0.78 moles  of nitrogen dioxide will produce 0.78 moles of nitrogen gas and 1.56 moles of oxygen gas. Hence, total volume of gas produce is 52.3 liters.

STP condition is the condition at which the temperature is 298 K and pressure is 1 atm.

As per the given equation, 2 moles of nitrogen dioxide gives 2 moles of oxygen gas and one mole of nitrogen gas.

molar mass of NO₂ = 46 g/mol

no.of moles in 36.05 g = 28.04/46 = 0.78 moles.

0.78 moles of  NO₂ produce  1.56 moles of O₂ and 0.78  moles of  N₂.

volume of one mole at STP = 22.41 L.

then volume in 0.78 moles = 0.78 × 22.41 = 17. 47 L

volume of 1.56  moles of  O₂ = 1.56 × 22.41 = 34.9 L.

Then total volume = 52.37 L.

Therefore, 28.04 g of NO₂ gas will give a total volume of 41 L of gases.

Find more on STP condition:

brainly.com/question/14748919

#SPJ1

Use chromatography to separate and distinguish the two substances, a refractometer to determine the refractive index, a hydrometer to determine the liquid's density, or both.

Ethanol, commonly referred to as ethyl alcohol, is a colorless, flammable liquid that is created when yeasts or other microbes ferment sugars and carbohydrates. One of the most widely used alcohols, it is a fuel, a solvent, and a component of alcoholic drinks. The main psychoactive ingredient in alcoholic beverages is ethanol, which has been used and consumed by humans for a very long time.

The refractive index of a colorless liquid can be measured with a refractometer to ascertain if it is pure ethanol or a mixture of ethanol and sucrose. The measurement can be used to determine whether ethanol or sucrose is present in the liquid because they have different refractive indices. The refractive index of an ethanol and sucrose mixture will be different from either pure ethanol or pure sucrose. A hydrometer can also be used to determine the liquid's density. A mixture of sucrose and ethanol will have a different density from pure sucrose since ethanol is less dense than sucrose.

To know more about ethanol, visit:

https://brainly.com/question/23435787

#SPJ1

The heat of solution is typically expressed in units of energy, such as joules (J) or calories (cal).

The most commonly used unit is joules, as it is part of the International System of Units (SI). The heat of solution can also be expressed in kilojoules (kJ) or megajoules (MJ), which are larger units of energy.

In older literature, heat of solution may be expressed in calories. One calorie is equivalent to 4.184 joules, so it is a smaller unit of energy than the joule. However, the use of calories in scientific literature has declined in favor of the joule.

Regardless of the units used, the heat of solution is a measure of the amount of heat absorbed or released during a chemical reaction, such as the dissolution of a solid in a liquid. A positive value for the heat of solution means that heat is absorbed during the reaction and the solution is endothermic. A negative value means that heat is released during the reaction and the solution is exothermic.

To learn more about  Heat of solution:

https://brainly.com/question/30437871

#SPJ4

Yes. NH4+ have tetrahedral molecular geometry.  It has the bond angel of 109.5 degree C.

The Tetrahedral molecular geometry is defined as the geometry in which a central atom is located at the center with four substituents that are located at the corners of a tetrahedron. The bond angel of this is 109.5°. Tetrahedral geometry is a molecular shape that occurs when there are four bonds and no lone pairs in the molecule's central atom. In this, the atoms bonded to the central atom are located at the four corners of a tetrahedron. The tetrahedral molecules are defined by the presence of four atoms bonded to a central atom. Each vertex of the molecular geometry of NH4+ represents a location for one of the four substituents or elements bonded to the central atom.

To learn more about Tetrahedral molecular geometry please visit:

https://brainly.com/question/20274710

#SPJ4

Magnesium have two valence electrons. Because the outer energy level  for the magnesium atom is 3 and it has two electron in this energy level.

The Valence electrons are defined as the electrons that located in the outermost electron shell of an atom. These valence electrons being the furthest from the nucleus and thus the least tightly held by the atom are the electrons that participate in bonds and reactions. The number of valence electrons that an element has determines its reactivity, electronegativity and the number of bonds it can form. We can use the periodic table to help to determine how many valence electrons an element specifically a neutral atom of the element has. Looking at the group that the element is in as the group number indicates the number of valence electrons that the element has.

To learn more about Valence electron please visit:

https://brainly.com/question/371590

#SPJ4

E. Light silicates have a higher specific gravity Due to their high iron and magnesium content, whereas dark silicates have a lower specific gravity because they lack iron and magnesium.

Magnesium is an essential mineral that is required by the body for a variety of functions, including building strong bones and teeth, regulating heart rhythms, supporting the immune system, maintaining normal nerve function, and helping to convert food into energy. Magnesium also plays a role in several enzyme systems and helps regulate blood sugar levels. It can be found naturally in many foods, including whole grains, nuts, beans, dark green leafy vegetables, and some fruits. Additionally, magnesium can be taken as a dietary supplement.

To learn more about magnesium

https://brainly.com/question/15168276

#SPJ1

Yes, the sugar is considered as the pure substance and not the mixture.

The Sugar is considered as the pure substance and not the mixture because the sugar consists of the single type of the particles and it made by combining the two or the more elements in the defined ratio, that means  it is the compound having the molecular formula of the C₁₂H₂₂O₁₁, while the mixtures are the substance that have the no definite composition.

Therefore,  the chemical composition of the sugar ,C₁₂H₂₂O₁₁ is definite and it does not vary, so that the sugar is considered as the pure substance.

To learn more about the pure substance here

https://brainly.com/question/24462192

#SPJ4

When benzoic acid (C7H6O2) is treated with aqueous sodium hydroxide (NaOH), it undergoes a reaction called a base-catalyzed hydrolysis.

This reaction results in the formation of the sodium salt of benzoic acid, also known as sodium benzoate (C7H5O2Na), and water (H2O). The reaction can be represented by the following equation:

C7H6O2 + NaOH → C7H5O2Na + H2O

The structure of sodium benzoate can be represented as follows:

O=C-C6H5-O-Na+

Here, the acidic proton (H+) from benzoic acid has been replaced by a sodium cation (Na+), creating a salt that is highly soluble in water.

Learn more about benzoic acid:

https://brainly.com/question/28299797

#SPJ4

The relative chemical shifts of the carbons can be deduced from their proximity to electronegative atoms and the degree of unsaturation in the molecule.

In NMR spectroscopy, the chemical shift of a carbon atom is a measure of its electron density and the electron-withdrawing or electron-donating effect of neighboring atoms. Carbon atoms near electronegative atoms, such as oxygen or nitrogen, will experience a greater electron-withdrawing effect and will therefore have a lower chemical shift value (i.e. they are more shielded).

On the other hand, carbon atoms near electron-donating atoms, such as alkyl groups, will have a higher chemical shift value (i.e. they are less shielded). Additionally, the degree of unsaturation (the number of double or triple bonds) in a molecule can also affect the chemical shift of the carbons, with more highly unsaturated carbons generally having higher chemical shift values.

Learn more about Carbons:

https://brainly.com/question/1301348

#SPJ4

Complete Question:

The chemical environment of carbons can be deduced form their chemical shifts. Deduce the relative chemical shifts of the carbons at the labeled positions (Carbons that are highly shielded have low delta, chemical shift; values:) 1) The carbon with the smallest delta value (the most shielded) is The carbon with the largest delta value (the most deshielded) is 2) QH The carbon with the smallest delta value (the most shielded) is The carbon with the largest delta value (the most deshielded) is

As per the balanced chemical equation, 2 moles of sodium azide gives 3 moles of nitrogen gas. Hence, one mole of sodium azide will give 1.5 moles of nitrogen gas having mass of 42 grams.

Sodium azide is an ionic compound formed by the electrons transfer from sodium to nitrogen. It is highly soluble in water and dissociates into its ions.

Sodium azide is a poisonous compound.

From the balanced chemical equation of the decomposition of sodium azide, it is clear that, 2 moles of sodium azide gives 3 moles of nitrogen gas.

then, one mole of sodium azide will give 3/2 = 1.5 moles of nitrogen gas.

Mass of one mole of nitrogen gas = 28 g

then mass of 1.5 moles = 28 ×1.5 = 42 g

Therefore, the decomposition of one mole of sodium azide gives 42 grams of nitrogen gas.

Find more on sodium azide:

https://brainly.com/question/14697368

#SPJ9

The dart will leave the spring gun with a velocity of 22.4 m/s.

To calculate the velocity of the dart when it leaves the spring gun, we can use the equation for the potential energy stored in a spring:

PE = (1/2)kx^2

where k is the spring constant, and x is the compression of the spring.

Since the spring is compressed by 5 cm, the potential energy stored in it is:

PE = (1/2)(250 N/m)(0.05 m)^2

PE = 6.25 J

The potential energy stored in the spring will be transferred to the dart when it is released, and we can calculate the velocity of the dart using the equation of conservation of energy:

PE = (1/2)mv^2

where m is the mass of the dart, and v is its velocity.

Solving for v:

v = sqrt(2PE/m)

=> sqrt(2(6.25 J)/(0.025 kg))

=> 22.4 m/s.

To learn more about Velocity :

https://brainly.com/question/25287332

#SPJ4

Speed of rider is 34.293m/sec when she experiences 10g's and length of centrifuge is 12m.

Centripetal acceleration increase is characterized as the property of the movement of an item navigating a roundabout way. Any item that is moving all around and has a speed increase vector pointed towards the focal point of that circle is known as Centripetal acceleration increase. You probably seen different instances of centripetal acceleration increase in your daily existence. On the off chance that you drive a vehicle around a circle, your vehicle is going through centripetal acceleration increase and a satellite circling the earth likewise follows a centripetal acceleration increase. Centripetal means towards the middle.

The centripetal acceleration of fighter jet pilot is given by

a=v²/r where a is the acceleration, v is the speed and r is the distance of fighter jet from the center.

We have a=98m/s²,v=?,r=12m,after putting all respective quantities value we get

=>98=v²/12

=>v²=98×12

=>v²=1176m²/s²

=>v=√1176m²/s²

=>v=34.29m/sec.

Hence, speed of fighter jet pilot is 34.29m/sec.

To know more about centripetal acceleration, visit here:

https://brainly.com/question/14465119

#SPJ4

(Complete question) is:

To withstand "g-forces" of up to 10 g's, caused by suddenly pulling out of a steep dive, fighter jet pilots train on a "human centrifuge." 10 g's is an acceleration of 98 m/s².

If the length of the centrifuge arm is 12 m , what speed is the rider moving when she experiences 10 g's ?

The recrystallization process can remove impurities from the original sample of benzoic acid and produce a purified product with high yield and purity.

Recrystallization is a technique used to purify a solid compound. The principle behind the recrystallization of benzoic acid is that benzoic acid is much more soluble in hot solvent (such as hot water) than in cold solvent. Therefore, if benzoic acid is dissolved in hot solvent and the solution is allowed to cool, the benzoic acid will crystallize out of the solution as it becomes less soluble in the cooler solvent.

The basic steps involved in the recrystallization of benzoic acid are as follows:

1) Dissolve the impure sample of benzoic acid in a minimal amount of hot solvent (e.g. hot water) to form a saturated solution.

2) Filter the hot solution to remove any insoluble impurities or particulate matter.

3) Allow the solution to cool slowly to room temperature or below, to encourage crystallization of the benzoic acid.

4) Collect the purified benzoic acid crystals by vacuum filtration, and wash the crystals with a small amount of cold solvent to remove any remaining impurities.

5) Dry the purified benzoic acid crystals to remove any remaining solvent.

For more questions on recrystallization -

https://brainly.com/question/28588509

#SPJ4