Solution:
The magnitude of A vector is 84.9 m in the positive y-axis direction.
So the X component of A =0
the Y component of A = 84.9 m
Now the magnitude of B vector is 195 m and it makes an angle of 41° in the direction from the positive x-axis direction.
So the X component of B = B cos 41°
= 195 x cos 41°
= 195 x 0.75 = 146.25 m
the Y component of B = B sin 41°
= 195 x sin 41°
= 195 x 0.65 = 126.75 m
Now it is given that vector C has a magnitude of 126.2 m and it makes a direction towards the positive x-axis.
So the X component of C =126.2 m
the Y component of C = 0
Comparing all these, we get
1. B vector has the largest X component
2. B vector has the largest Y component
if wavelength and speed of a wave are 4 m and 332 m/s respectively, calculate its frequency
Explanation:
Given
wavelength = 4 m
speed = 332 m/s
frequency = ?
We know we have the formula
wavelength = speed / frequency
4 = 332 / frequency
frequency = 332/4
Therefore frequency is 83 Hertz .
A crate is being pulled down an incline as shown in the figure. With respect to the crate's direction of motion, which of the following forces does only negative work on the crate?
Answer: Fn
Explanation: Because Fn is applying force upward
Which of the following is a negative affect of palm oil farming related to biodiversity?
Question 2 options:
Palm oil is poisonous to local animals, causing many deaths.
Planting palm oil plantations removes essential nutrients from the soil.
Planting palm oil plantations means cutting down natural rainforests.
Palm oil farming has no negative effects on biodiversity.
Answer:
The main facts about palm oil
Here are the main facts why palm oil plantations are harming the environment: They release massive amounts of CO2 in the air as rainforests are cleared. Rainforests' soils hold about 45% of the world's terrestrial carbon, cutting them down is like releasing a carbon bomb.The production of palm oil can result in land grabs, loss of livelihoods and social conflict, and human rights are often violated on plantations. The resulting conflicts have had a significant impact on the social welfare of many. Read more. Palm oil is one of the most profitable land uses in the tropics.Explanation:
The main facts about palm oil
Here are the main facts why palm oil plantations are harming the environment: They release massive amounts of CO2 in the air as rainforests are cleared. Rainforests' soils hold about 45% of the world's terrestrial carbon, cutting them down is like releasing a carbon bomb.The production of palm oil can result in land grabs, loss of livelihoods and social conflict, and human rights are often violated on plantations. The resulting conflicts have had a significant impact on the social welfare of many. Read more. Palm oil is one of the most profitable land uses in the tropics.the fall of a body on the earth's surface cannot be a complete free fall why ?
Explanation:
because the boy has larger surface area due to which he offers the larger air resistance which decreases the acceleration so, he will fall towards the earth's surface approximately with constant velocity.
Question 5 of 15
Hertz (Hz) is the unit used to measure a wave's
A. frequency
B. period
C. amplitude
D. wavelength
SUBMIT
I believe that it’s frequently?
Answer:
Hertz is the S.I. unit of frequency and is used to measure a wave's frequency . So, option A frequency is the correct answer.
An atom of lithium (Li) forms an ionic bond with an atom of chlorine (Cl) to form lithium chloride. How are the valence electrons of these atoms rearranged to form this bond?
A few valence electrons are shared between the atoms.
Many valence electrons are shared between the atoms.
Electrons are transferred from the chlorine atom to the lithium atom.
Electrons are transferred from the lithium atom to the chlorine atom.
Answer:
electrons are transferred from the lithium atom to the chlorine atom
Answer:
D
Explanation:
I just took the test :)
How many significant figures are in the number 08.40001
07
3
O 6
O 5
Answer:
5
Explanation:
every number after the decimal
What happens when the falling object reaches its terminal velocity? It will stop _________
and fall at a constant rate of _____________. Terminal velocity means an object is no longer in free fall and travels at a constant rate of _______________.
fill in the blanks and I will give you brianestest!(Can't spell)PLZZZZ
!
Answer:
LOL i don't even know
Explanation:
Different sources of heat . Explain
Answer:
sun,fire
Explanation:
The main source of heat is sun. It is because there is so much pressure in the core of sun that nuclear fusion takes place: hydrogen is changed to helium. Nuclear fusion creates heat and light.
What is the frequency of a light wave if its wavelength is 4.70 x 10-7 meters?
A. 1.57 x 10-15 Hz
B. 1.57 x 10-8 Hz
O
C. 6.32 x 107 HZ
O
D. 6.38 x 1014 Hz
Answer:
6.38 * 10^14 Hz
Explanation:
What the distance between 2 particles is doubled and the force between them is quartered, what is that called
Answer:
Coulomb's law.
Explanation:
If the distance between two particles is doubled and the force between them is quartered, this is known as Coulomb's law. Coulomb presented a law in which he states that when there is increase occur in distance between two objects, the force between them is decreases so if the distance between two particles or objects is doubled so the force between them is also quartered.
PLEASE ANSWER QUICK!
Meiosis is a process that contributes to______
A. the production of somatic cells.
B. asexual reproduction.
C. creation of organisms with unique characteristics.
HELP ASAP!! WILL TRY TO GIVE BRAINLIESTT!!
Please define the prefixes hyper-, hypo-, & iso- AND describe a solution that is hypertonic, hypotonic, & isotonic as well as compare how a living cell reacts when placed in a solution of each of the 3 types.
If a cell is placed in a hypertonic solution, water will leave the cell, and the cell will shrink. In an isotonic environment, there is no net water movement, so there is no change in the size of the cell. When a cell is placed in a hypotonic environment, water will enter the cell, and the cell will swell.
a small balloon containing baking soda has a mass of 4 grams. A student adds 10 ml. of vinegar
to a 100 gram glass bottle. The student stretches the opening of the balloon over the mouth of
the bottle, mixing the baking soda and vinegar inside the bottle. Once the balloon is inflated, the
student finds the mass of the balloon, bottle, and their contents to be 116 grams. What was the
mass of the vinegar originally in the bottle
F.10g G.12g J.16g
Answer:
10 grams
Explanation:
I took a test with this question earlier.
A steel rod has a diameter of 3.75cm.Express it's diameter in millimeters and meter
Answer:
3.75cm into millimetres
= 3.75 * 10
37.5 millimetres
3.75 cm into metres
3.75/100
= 0.0375m
The slope of a position-time graph can be used to find the moving obiects
Answer:
Is this a true and false statement?
Explanation:
. What is the velocity of a free-
falling object after 5 seconds?
(Use 10 m/s2 for gravity.)
Answer:
vf = 50 m/s
Explanation:
The equation for this kinematic problem is:
vf = vi + at
We are given:
a = 10m/s^2
vi = 0m/s
t = 5 sec
vf = ?
Solve for final velocity:
vf = 0 + 10(5)
vf = 50 m/s
Can u anser 5,6 on the picture
Answer: Number 6 is Periods
Explanation:
a sports event, the car starts from rest, in 5.0 s its acceleration is 5.0 m/s2.
culate the distance travelled by car.
Answer:
62.5m
Explanation:
Given parameters:
Time = 5s
Acceleration = 5m/s²
Unknown:
Distance traveled by car = ?
Solution:
To solve this problem, we use one of the motion equations as given below:
S = ut + [tex]\frac{1}{2}[/tex] at²
S is the distance traveled
t is the time taken
u is the initial velocity = 0m/s
a is the acceleration
Now insert the parameters and solve;
S = (0 x 5) + ([tex]\frac{1}{2}[/tex] x 5 x 5²) = 62.5m
Un automóvil se mueve a velocidad constante v = 60 [km/h]. Si el tiempo de reacción del conductor al ver la luz roja de una intersección es de 0.5 [s], y ´este desacelera a razón de 40 [m/s2 ] ¿Qué distancia recorre el automóvil desde el instante en que el conductor nota la se˜nal hasta detenerse por completo? Entiéndase por tiempo de reacción, el intervalo de tiempo transcurrido entre el instante en que se percibe la señal y el instante en que se lleva a cabo la acción (instante en que el conductor activa el sistema de frenado).
Answer:
El automóvil recorre una distancia de 11.806 metros antes de deternerse por completo.
Explanation:
De acuerdo con el enunciado, el conductor nota la luz roja, empieza a decelerar 0.5 segundos después y decelera hasta detenerse. La distancia total recorrida por el automóvil desde el instante en que el conductor nota la luz roja ([tex]\Delta s_{T}[/tex]), medida en metros:
[tex]\Delta s_{T} = \Delta s_{1}+\Delta s_{2}[/tex] (1)
Donde:
[tex]\Delta s_{1}[/tex] - Distancia recorrida a velocidad constante, medida en metros.
[tex]\Delta s_{2}[/tex] - Distancia recorrida hasta alcanzar el reposo, medida en metros.
Si suponemos que la segunda etapa describe un movimiento uniformemente acelerado, entonces la distancia recorrida total que representada por la siguiente fórmula:
[tex]\Delta s_{T} = v_{o}\cdot \Delta t_{o} + \frac{v_{f}^{2}-v_{o}^{2}}{2\cdot a}[/tex] (2)
Donde:
[tex]v_{o}[/tex] - Velocidad inicial del automóvil, medida en metros por segundo.
[tex]v_{f}[/tex] - Velocidad final del automóvil, medida en metros por segundo.
[tex]\Delta t_{o}[/tex] - Tiempo de reacción del conductor, medido en segundo.
[tex]a[/tex] - Aceleración, medida en metros por segundo al cuadrado.
Si conocemos que [tex]v_{o} = 16.667\,\frac{m}{s}[/tex], [tex]v_{f} = 0\,\frac{m}{s}[/tex], [tex]\Delta t_{o} = 0.5\,s[/tex] y [tex]a = -40\,\frac{m}{s^{2}}[/tex], entonces la distancia recorrida total es:
[tex]\Delta s_{T} = \left(16.667\,\frac{m}{s} \right)\cdot (0.5\,s)+\frac{\left(0\,\frac{m}{s} \right)^{2}-\left(16.667\,\frac{m}{s}\right)^{2}}{2\cdot \left(-40\,\frac{m}{s^{2}} \right)}[/tex]
[tex]\Delta s_{T} = 11.806\,m[/tex]
El automóvil recorre una distancia de 11.806 metros antes de deternerse por completo.
A 48 N force accelerates a block at 6 m/s/s. What is the mass of the block?
Answer:8
Explanation:
m=f/a
48/6=8
To control whether an object is solid or incorporeal (things can pass through it) you would use the:
Answer:
Gamma radiation or Cathode rays
Explanation:
by striking incident gamma or cathode rays onto the solid when placed on a photographic plate
I need help
What should be done when the National Weather Service issues a severe weather watch?
Evacuate immediately.
Seek shelter immediately.
Take immediate action.
Begin to prepare.
Feathers and a bowling ball are dropped in a vacuum, airless environment. Which one will hit the ground first?
Feathers
Bowling Ball
They will float
At the same time
Answer: at the same time
Explanation: in a vacuum, there isnt air, right? so there isnt gravity pushing down on the heavier object, so they will both land at the same time.
good? :)
how has evidence changed our views on the universe
Answer:
We found out more about how the universe had started (Big Bang theory), how the planets were created and how stars are born.
What is a main difference between a mixture and a pure substance?
illl give you 100 points!!!
A mixture is only a liquid, but a pure substance can be in any state.
A mixture looks the same throughout, but a pure substance does not.
A mixture can vary in composition, but a pure substance has a set composition.
A mixture can be made up of a single compound, but a pure substance cannot.
Answer:
C
Explanation:
A-false, mixtures can be solids too.
B-false, pure substances will have a constant appearance
C-true, a mixture has two or more composition, but the pure substance has a constant composition
D-false, mixtures have more than 1 compounds as I said before
A mixture can vary in composition, but a pure substance has a set composition. Thus, a pure substance is homogeneous always.
What is a mixture?A mixture is the combination of two or more individual components which are mixed physically or chemically. Mixtures can be homogenous or heterogenous.
A pure substance is a fixed composition containing its own particles only. For example, water, fruits, pure metals etc.Thus, pure substances are always homogeneous. In the case of mixtures, the composition is not definite.
Homogeneous mixtures appears to be one phase whereas, a heterogenous mixture shows phase separation. The components of a mixture can be separated physically.
To find more on mixtures, refer here:
https://brainly.com/question/24898889
#SPJ6
PLSS HELPPP Which is a better deal: a 2 terabyte external hard drive for $100, or a
400-gigabyte hard drive for $50?
Answer:two terabyte external hard drive for $100
Explanation:
Why are the inner plaets smaller
Answer:
The inner planets are much smaller than the outer planets and because of this have relatively low gravity and were not able to attract large amounts of gas to their atmospheres.
Fill in the blank.
_______________, not velocity, is used to calculate the average acceleration.
Answer:
speed
Explanation:
Change in velocity, not velocity, is used to calculate the average acceleration. Velocity is displacement over time.
Acceleration:
It is defined as the ratio of change in velocity to time. It is given by:
Acceleration= Change in velocity / time
a= u-v / t
where,
u= initial velocity
v= final velocity
t= time
Thus, we can conclude that a change in velocity is used to calculate average acceleration.
Find more information about Acceleration here:
brainly.com/question/22048837
If you could change one property of a substance ( solid, liquid, and gas) you have to use in your daily life, what would it be and why?
Please hurry
I will give you BRAINLIEST!!!!!!
And pleaseee write 5 sentences why??
Answer
Soap into a liquid
Explanation: