The main product of free radical bromination of methane is
A) ethane
B) chloromethane
C) bromonethane
D) bromine

Answer:

physical change because the gaseous water is chemically the same as the liquid

Explanation:

Matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.

A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.

This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.

Hence, the boiling of water is considered to be a physical change because the gaseous water is chemically the same as the liquid i.e there isn't any changes in chemical composition of water when boiling.

Answer:

Examples of isotones include carbon-12, nitrogen-13 and oxygen-14. These atoms all have six neutrons and six, seven and eight protons respectively. A mnemonic that can be used to differentiate isotones from isotopes and isobars is as follows: same Z (number of protons) = isotopes.

Answer: what are the choices?!.

Explanation:

Answer:

Yard . I hope this helped:))

Answer:

c. NaOH

Explanation:

just took the quiz

Answer:

Add some water to his solution

Explanation:

Ion pair effect refers to strong electrostatic interaction between oppositely charged ions in solution. Such strong interaction affects solute- solvent interaction when an ionic substance is dissolved in water.

High solute concentration may lead to ion-pair effect. Hence, the ion pair effect may be minimized by adding more water (decreasing the concentration of the solution).

To reduce the ion- pair effect, Andy needs to add some water to his solution (dilution).

The activity that would reduce the ion-pairing effect in his AICI₃ solution is : ( B ) add some water to his solution

Ion pair effect is a strong electrostatic interaction seen between ions with opposite charges, when an ionic substance is been dissolved in a solvent such as water this effect will affect the dissolution of the substance.

High concentration of the solute in a solution also leads to the ion pair effect therefore for Andy to reduce the ion-pairing effect in his solution he has to add more water to reduce the concentration of the solute.

Hence we can conclude that The activity that would reduce the ion-pairing effect in his AICI₃ solution is to add some water to his solution

Learn more about ion pair effect : https://brainly.com/question/24100697

Answer:

No of protons is equal to the atomic number.

Answer:

atomic number

Explanation:

Answer:

8

Explanation:

Pls mark brainly

Answer:

Explanation:

Continental tropical air masses are extremely hot and dry. Arctic, Antarctic, and polar air masses are cold. The qualities of arctic air are developed over ice and snow-covered ground. Arctic air is deeply cold, colder than polar air masses.

Answer:

it's B

Explanation:

Write the balanced equation: H2SO4 + 2KOH → K2SO4 +2H2O. So 2(moles KOH) = (moles H2SO4); 2(volume KOH)(concentration KOH) = (volume H2SO4)(concentration H2SO4); 2(40ml)(0.2M) = (30ml)(x); x = 0.53M

The concentration of  H₂SO₄ solution is equal to 0.133 M.

A neutralization reaction can be described as a chemical reaction in which an acid and base react together to form respective salt and water. When a strong acid such as HCl will react with a strong base such as NaOH the salt can be neither acidic nor basic.

When H₂SO₄ (a strong acid) reacts with KOH, the resulting salt will be  K₂SO₄ and water.

H₂SO₄    +  2KOH   → K₂SO₄  +  2H₂O

Given, the concentration of KOH solution = 0.2 M

The volume of the KOH solution = 40 ml = 0.040 ml

The number of moles of KOH, n = M × V = 0.2 × 0.04 = 0.008 mol

The volume of the H₂SO₄ = 30 ml = 0.03 L

The number of moles of H₂SO₄, n = 0.008/2 = 0.004 mol

The concentration of  H₂SO₄ solution = 0.004/0.03 = 0.133 M

Learn more about neutralization reaction, here:

brainly.com/question/20038776

#SPJ2

Answer:

Regla de Markovnikov En fisicoquímica orgánica, la regla de Markovnikov es una observación respecto a la reacción de adición electrófila.Regla de Markovnikov En fisicoquímica orgánica, la regla de Markovnikov es una observación respecto a la reacción de adición electrófila.

Explanation:

Answer:

For 1: 12.0 moles of water will contain [tex]7.2264\times 10^{24}[/tex] number of molecules

For 2: The given amount of water molecules will be present in 5.41 moles of water.

Explanation:

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

We are given:

Moles of water = 12.0 moles

Using above concept:

If 1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 12.0 moles of water will contain = [tex](12.0\times 6.022\times 10^{23})=7.2264\times 10^{24}[/tex] number of molecules

Hence, 12.0 moles of water will contain [tex]7.2264\times 10^{24}[/tex] number of molecules

We are given:

Molecules of water = [tex]3.26\times 10^{24}[/tex] molecules

Using above concept:

If [tex]6.022\times 10^{23}[/tex] number of molecules are present in 1 mole of a compound

So, [tex]3.26\times 10^{24}[/tex] number of molecules will be present in = [tex]\frac{1mol}{6.022\times 10^{23}}\times 3.26\times 10^{24}=5.41[/tex] moles of water

Hence, the given amount of water molecules will be present in 5.41 moles of water.

Answer:

CH 2 CH 3 CHCH = C6H5 + 5 Hydrogen Atoms

I hope I helped you.

Deepest apologies if I was wrong!

Bye!

~ Myaka O.

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set up the equilibrium reaction by which chromium (II) iodide is ionized as follows:

[tex]CrI_2(s)\rightarrow Cr^{2+}(aq)+2I^-(aq)[/tex]

Thus, it is possible to notice that the the moles, and therefore concentrations, of chromium(II) and iodide ions are going to be different, by a factor of 2 due to the mole ratio in the aforementioned chemical equation.

Regards!

Answer:

The reaction rate increases in direct proportion to the concentration of the reactant in solution - second order reaction

The reaction rate is constant regardless of the amount of reactant in solution - zero order reaction

An increase in the concentration of the reactant in solution causes the reaction rate to increase exponentially - first order reaction

Explanation:

In a second order reaction, the rate of reaction is directly proportional to the concentration of reactants. This implies that, reaction rate varies as the concentration of the reactant in solution varies.

For a zero order reaction, the rate of reaction is independent of the concentration of the reactants in solution. This means that reaction rate is constant regardless of the amount of reactant in solution.

For a first order reaction, the rate of reaction varies exponentially as the concentration of reactants. Hence, an increase or decrease in the concentration of the reactant in solution causes the reaction rate to increase or decrease exponentially.

Answer:

c. Kc and Kp are equal when the sum of the stoichiometric coefficients for the products equals the sum of the stoichiometric coefficients for the reactants.

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to write the relationship between Kc and Kp in terms of the temperature and the change in the stoichiometric coefficients:

[tex]Kp=Kc(RT)^{\Delta \nu}[/tex]

Thus, we can see that the Kp=Kc just when Δυ=0, which is the sum of the coefficients of products minus that of reactants; and therefore, the correct answer will be c. Kc and Kp are equal when the sum of the stoichiometric coefficients for the products equals the sum of the stoichiometric coefficients for the reactants.

Regards!

Answer:

ECUACIÓN:HClO 2 + H 2O → ClO− 2 + H 3O

ACIDO: HClO2

BASECONJUGADA:ClO-2

Explanation:

Answer:

Carbon is dull, have a low density, and are poor conductors of heat.

Explanation:

Carbon is a non-metal, therefore bearing properties of a non-metal element.

Answer:

Glass 1

Explanation:

Molarity is measured in moles of substance per liter.

For the sake of calculations, let's say that each glass contains 1 mole of juice and 1 liter after it is divided between the glasses. If you add an equal amount of water to glass 1 ( another liter), you now have:

Glass 1 = 1 mole / 2 liters = 0.5 M

Glass 1 = 1 mole/ 1 liter = 1 M

So glass 1 will have a lower molarity

Answer:

5 atoms form one formula unit of Fe2O3

Explanation:

2 atoms of Fe (Iron)

and 3 atoms of O ( Oxygen)

so total = 3 + 2

= 5

Answer:

fe203 the right answer is thus

Answer:

Concentration C = 0.0189 mol/L

Explanation:

From the given information:

Let consider the formula used in calculating the concentration according to Beer's law:

[tex]\mathtt{A =\varepsilon \times L \times C}[/tex] --- (1)

here;

A = absorbance

ε = coefficient of molar absorptivity

L = path length

C = concentration (mol/L)

Also, from Beer law plot:

y = mx+b

where,

y represent absorbance A

b represents intercept

m represents the coefficient of molar absorptivity ε

and x represents the concentration(C).

replacing the substituted entities

A = ε × C + b ---- (2)

Making the concentration the subject of the above formula:

[tex]C = \dfrac{A-b}{\varepsilon}[/tex]----(3)

From y = 11.589x - 0.0002

A = 11.589 *C - 0.0002

Given that:

A = 0.219

∴

0.219 = 11.589 *C - 0.0002

0.219 + 0.0002 =  11.589 *C

C = 0.2192/11.589

C = 0.0189 mol/L

Answer:

See explanation and images attached

Explanation:

The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.

However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.

Answer:

-0.08 °C

Explanation:

We can solve this problem by using Charles' law, which states that at constant pressure:

Where in this case:

We input the data:

And solve for T₂:

Finally we convert 273.08 K to Celsius:

Answer:

a. Serine is converted to pyruvate. It is glucogenic.

b. Aspartate is converted citric acid cycle intermediates. It is glucogenic.

c. Leucine is converted to AcetylCoA. It is ketogenic.

Explanation:

The degradation of amino acids usually account for a significant amount of energy production by the human body. The carbon skeletons of amino acids after deamination are either channelled to gluconeogenesis, ketogenesis or are completely oxidized to carbon dioxide and water.

The amino acids that are channelled to gluconeogenesis are said to be glucogenic. The glucogenic amino acids are those that are either degraded to ∝-ketoglutarate, succinylCoA, fumarate or oxaloacetate which are citric acid cycle intermediates that can be converted to glucose and glycogen. Also, amino acids that are degraded to pyruvate are glucogenic as pyruvate can be converted to glucose via oxaloacetate. Examples of these amino acids are serine which is converted to pyruvate and aspartate which is converted to the citric acid cycle intermediate, oxaloacetate.

On the other hand, amino acids that are channelled to ketogenesis are said to be ketogenic. The ketogenic amino acids are degraded to either acetylCoA or acetoacetylCoA. AcetylCoA and acetoacetylCoA are used in the formation of key one bodies. An example of a ketogenic amino acid is leucine which is converted both to AcetylCoA and acetoacetylCoA.

Answer:

-219

Explanation:

1.5(339) - 1.5(485) = -219

The approximate enthalpy change for this substitution reaction is -219 kJ.

In the case of this substitution reaction, we need to find the enthalpy change when NaO₂C₂H₂Cl is converted to NaO₂C₂H₂F.

This reaction involves the breaking of the C-Cl bond and the formation of the C-F bond.

We have to subtract the bond energy of the C-F bond from that of the C-Cl bond and multiply by the number of moles involved.

So we will have;

ΔH= 1.500 mole [339.0  kJ/mol - 485.0 kJ/mol]

ΔH= -219 kJ

Learn more: https://brainly.com/question/1301642

Answer:

His results will be skewed because there was more water than stock solution. Which would cause the percentage solution to be less than 50% therefore the density would be less than the actual value.

Explanation:

The solution will have percentage less than that of 50%. Therefore the density would be less than the actual value.

Suppose there should be 50 mL of the solution, and he added 60 mL. So 10 mL of the solution is added more.

Suppose the mass of the solute is m.

Originally, the density is = [tex]$\frac{m}{50}$[/tex]     [tex]\left(\frac{\text{mass}}{\text{volume}}\right)[/tex]

Now after adding extra 10 mL , the density becomes [tex]$\frac{m}{60}$[/tex].

Therefore, [tex]$\frac{m}{50}>\frac{m}{60}$[/tex]

So the density decreases when we add more solution.

Answer:

Compound A and compound B are constitutional isomers with molecular formula C3H7Cl.

When compound A is treated with sodium methoxide, a substitution reaction predominates. When compound B is treated with sodium methoxide, an elimination reaction predominates.

Explanation:

Constitutional isomers are the one which differs in the structural formula.

When compound A is treated with sodium methoxide, a substitution reaction predominates.

That means sodium methoxide is a strong base and a strong nucleophile.

But when it reacts with primary alkyl halides it forms a substitution product and when it reacts with secondary alkyl halide it forms mostly elimination product.

The reaction and the structures of A and B are shown below:

Answer:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

Explanation:

The reaction of the problem occurs as follows:

H2S(g) + O2(g) → H2O(g) + SO2(g)

To balance the reaction we must balance oxygens:

H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

To balance the complete reaction:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

As the energy is evolved, 124kcal are as product in the reactio per mole of H2S. As the balanced reaction contains 2 moles of H2S, the heat evolved is:

124kcal*2 = 248kcal:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

And this is the balanced equation

Answer:DE2

Explanation: