the mechanism of phosphorus fixation in the alkaline soil and acid soils​

Answer:

Abraham thought that GOD would raise Issac back from the dead. It was a test and they would sacrifice the donkey instead.

This question is describing two chemical equations whereby the concentration of ammonia has to be determined. The first reaction is between 25.00 mL of ammonia and 50.00 mL of 0.100-M HCl whose excess was neutralized with 21.50 mL of 0.050-M Na₂CO₃ and thus, the concentration ammonia in the cloudy solution was determined as 0.114 M.

First of all we need to go over the titration of the excess HCl with Na₂CO₃ by writing the chemical equation it takes place when they react:

[tex]2HCl+Na_2CO_3\rightarrow 2NaCl+CO_2+H_2O[/tex]

Whereas the mole ratio of HCl to Na₂CO₃ is 2:1 and the volume of the HCl leftover is determined as follows:

[tex]V_{HCl}^{leftover}=\frac{2*0.050M*21.50mL}{0.100M} =21.5mL[/tex]

Next, we infer that the consumed volume of HCl by the ammonia solution was:

[tex]V_{HCl}^{consumed}=50.00mL-21.50mL=28.5 mL[/tex]

Then, we write the chemical equation that takes place between ammonia and HCl:

[tex]HCl+NH_3\rightarrow NH_4Cl[/tex]

Whereas the mole ratio is now 1:1, which means that the concentration of ammonia was:

[tex]M_{NH_3}=\frac{28.5mL*0.100M}{25.00mL}\\\\ M_{NH_3}=0.114M[/tex]

Learn more:

Answer:

About 7.0 × 10³ J or 7.0 kJ

Explanation:

We want to determine the amount of energy needed to raise the temperature of 67 grams of water from 20°C to 45°C.

We can use the heat equation:

[tex]\displaystyle q = mC\Delta T[/tex]

Where C is the specific heat of water.

Substitute and evaluate:

[tex]\displaystyle \begin{aligned} q & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)\left(45^\circ \text{ C}- 20.^\circ\text{ C}\right) \\ \\ & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)(25^\circ \text{ C}) \\ \\ & = 7.0\times 10^3 \text{ J}\end{aligned}[/tex]

Recall that there are 1000 J in a kJ. Hence:

[tex]\displaystyle \begin{aligned} q & = 7.0\times 10^3 \text{ J} \cdot \frac{1\text{ kJ}}{1000\text{ J}} \\ \\ & = 7.0 \text{ kJ}\end{aligned}[/tex]

In conclusion, it will take about 7.0 × 10³ J or 7.0 kJ of energy to raise the temperature of 67 grams of water from 20 °C to 45 °C.

A) The answer to whether an average-size, single-family home be built with one day’s output from the saw mill is; No, it can't be built from one days output

B) The number of days will it take for the saw mill to produce enough lumber to build a neighborhood of 100 average-size homes is; 1100 days

A) From research, the average size capacity saw mill usually produces around 1500 board feet of boards per day.

Now, converting board ft to cubic meter gives;

1 board feet = 1/424 m³

Thus; 1500 board feet = 1500 * 1/424 ≈ 3.54 m³

Now, we are told that it takes 38 m³ of boards and plywood to build an average size single family home.

Since one days output = 3.54 m³

It is less than the volume required for the average sized house and so the daily output will not be sufficient.

B) Number of days to produce enough boards and plywood for the average sized family home = 38/3.54 ≈ 11 days

Thus, for 100  homes;

Number of days = 100 * 11 = 1100 days

Read more about production capacity at; https://brainly.com/question/25899399

Answer:

Down arrow:

-a car comes to a stop when a traffic light turns red

Up arrow:

-race car accelerates when a race begins

Circle:

-car driving 45 mile per hour down straight road

Explanation:

and i think the car going around a bend would be an up arrow

If there is direct variation and y=75 when x=25,when y=48 X = 16. Therefore, option A is correct.

link between two variables that can be described mathematically by an equation where one variable equals a constant multiplied by the other. For instance, the constant of variation is k = = 3 if y varies straight as x and y = 6 when x = 2. Consequently, y = 3x is the equation that describes this direct variation.

When x is not equal to zero, an equation of the form y = kx describes the linear function known as direct variation. When x is not equal to zero and k is a nonzero real number constant, the equation of the form xy = k describes the nonlinear function known as inverse variation.

x = ky

where k is constant

25 = k × 75

25 / 75 = k

k = 1 / 3

now when y = 48 then substitute the values

x = ky

x = 1 ÷ 3 × 48

x = 16

Thus, option A is correct.

To learn more about direct variation, follow the link;

https://brainly.com/question/13977805

#SPJ5

The number of moles of the solute in the solution is the product of its volume and molarity. The number of moles of copper sulphate in 0.500 L of 2.30 M solution is 1.15 moles.

Molarity of a solution is the common term used to represent the concentration of a solution. It is the ratio of its number of moles of solute to the volume of solution in liters.

Molarity = no.of moles/volume in L.

Molarity is a temperature dependant quantity.

The given solution has a volume of 0.500 L.

molarity of copper sulphate solution = 2.30 M

Thus, number of moles of copper sulphate solute dissolved in 0.50 L of water is calculated by multiplying the volume with molarity.

No. of. moles of copper sulphate = molarity × volume

= 0.500 L × 2.30 M = 1.15 moles.

Therefore, there will be 1.15 moles of copper sulphate in the solution.

To find more on molarity, refer here;

https://brainly.in/question/9793108

#SPJ2

The Lewis structure is the way of expressing the covalent bonding in molecules. The covalent bond formation takes place by the sharing of electrons in a molecule.

In Lewis dot structures or simply the Lewis structures, the dots are used to represent the electrons. They provide a picture of bonding in molecules in terms of the shared pair of electrons and the octet rule.

The concept of covalent bond is introduced by the scientist G.N Lewis. According to him, the atoms achieve stable octet when they are linked with each other by sharing of one more pairs of electrons. The covalent bonding occurs between the atoms which do not differ much in their electronegativity.

The Lewis structure of CaBr₂ is denoted below. Here two bromine atoms acquires a stable electronic configuration by sharing electrons. There are two single bonds between them.

To know more about Lewis structure, visit;

https://brainly.com/question/20300458

#SPJ5

Answer:

join the provisonal IRA and help free and unite ireland

Explanation:

fight aganst the english oppressors and free ireland

erinn go braugh

Answer:

All answers given in the photo

Answer:

0.133681 (cubic foot)

Explanation:

Answer:

sensory experience of a chemical reaction called combustion. In a way, fire is like the leaves changing color in fall, the smell of fruit as it ripens, or a firefly's blinking light. All of these are sensory clues that a chemical reaction is taking place

Explanation:

Sensory encounter with the combustion chemical process. Fire can be compared to the fall foliage's shifting hues, the aroma of ripe fruit, or the blinking light of fireflies. These are all sensory indicators that a chemical reaction is occurring.

Combustion is defined as a chemical interaction between different compounds, usually involving oxygen, that produces heat and light in the form of flames. Hydrocarbons and oxygen are the only reactants in a combustion reaction. The fuel is a hydrocarbon, and oxygen is required for burning.

It stimulates several of our senses at once, producing the vivid experience we anticipate from a tangible object. By using fuel, heat, and oxygen during combustion, that sensory experience is produced.

Thus, sensory encounter with the combustion chemical process. Fire can be compared to the fall foliage's shifting hues, the aroma of ripe fruit, or the blinking light of fireflies. These are all sensory indicators that a chemical reaction is occurring.

To learn more about combustion, refer to the link below:

https://brainly.com/question/15117038

#SPJ2

Answer:

Explanation:

Gravity pulls the balls down the ramp, and the force of gravity is bigger on larger-mass objects. The extra force on the bigger ball means that it has more energy when it gets to the bottom of the ramp and consequently travels more before stopping.

Answer:

There are 27 Valence electrons : )

4+1+1+1+6+4+1+1+4+1+1+1 is 27

Explanation:

There are a total of [5×1]+[2×4]+[7]=21[5×1]+[2 × 4 ] + [ 7]=21 valence electrons

Answer:

A

Explanation:

A liquid will will have the same color, it will not have the same shape and its volume will always be constant because you are not creating mass.

Hope this helps!

Answer:

The answer is C

Explanation:

Just took the test

Hydrogen bonding is the intermolecular interaction that occurs due to electronegativity differences. Substance B has stronger bonds and requires more energy. Thus, option B is correct.

Hydrogen bonding is present in the water molecules that is because of the electronegativity differences and the dipole-dipole interaction. The hydrogen of the water molecule is bonded to the oxygen molecule.

The hydrogen bonding affects the boiling and the melting point of the substances as more energy are required to change the phase of the matter. So when substance B requires 100ºC than substance A (78.4ºC) it shows strong hydrogen bonding.

Therefore, option B. substance B has a strong hydrogen bond is correct.

Learn more about hydrogen bonds here:

https://brainly.com/question/25989787

#SPJ2

Explanation:

Are you asking if that is the formula for caprylic acid? The answer is yes. CH₃(CH₂)₆COOH is the correct formula.

Caprylic acid, also known as C8 or octanoic acid, is a medium chain triglyceride (MCT) primarily found in coconut oil. It's the shortest of all the MCTs, making it the easiest for the body to break down into fuel. Once it is consumed, C8 is instantly digested and converted into ketones.

Answer:

Chlorine Iodine is a compound made out of one Chlorine molecule and one Iodine molecule

Explanation:

This question is describing an spectrophotometry experiment in which the concentration of copper(II) ions has to be determined when 2.50 g of a copper-rich penny is reacted with 50.0 mL of nitric acid. In addition, the absorbance of a sample of the solution turned out to be 0.12 at 635 nm, so that the concentration was estimated as 12.8 g/L.

First of all, we must recall the Beer's law that can be written as follows:

[tex]A=ebC[/tex]

Whereas A is the absorbance of the sample, e the molar absorptivity, b the cuvette's path and C the concentration. However, this problem is not providing sufficient information to calculate the required concentration, however, similar absorbance experiments have graphed (absorbance vs concentration) calibration curves exhibiting trendlines as the one shown below:

[tex]y=0.009647x-0.003655[/tex]

Thus, since y stands for the absorbance and x for the concentration but in g/L not M (mol/L) for those experiments, we can set y equal to 0.12 so we solve for x as the concentration of the copper(II) ions in the sample:

[tex]y=0.009647x-0.003655\\\\x=\frac{0.12+0.003655}{0.009647}\\\\x=12.8g/L[/tex]

Nevertheless, it would be great if you come up with your own trendline, having clear the units for the absorbance vs concentration graph and thus double check your results because the data was not enough for the time being.

Learn more:

Answer:

I don't know the answers of chemistry if you have an entrance question of maths so I can

[tex]\rule{2000pt}{1000000pt}[/tex]

Answer:

Ca = 40.1 g

Cl = 35.5

40.1 + 35.5×2

40.1 + 71

111.1 g

Answer:

Gravity will always be pulling everything towards Earth's center at an acceleration of 9.81 m/sec².

Answer:

C. 4%

Explanation:

The answer is 4%

Heat flows from our body to iron

Answer:

Individual organisms live together in an ecosystem and depend on one another. ... Some organisms can make their own food, and other organisms have to get their food by eating other organisms. An organism that must obtain their nutrients by eating (consuming) other organisms is called a consumer, or a heterotroph.

Explanation:

Answer:

1) B. determining what data to collect

2) C. Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Conduct several trials and record the average temperatures as the boiling points.

3) B. Heat energy overcomes the forces of attraction between the molecules of the substance, so the molecules can move more freely.

4). The addition of thermal energy causes the motion of water molecules to overcome electrostatic forces.

Explanation:

I think these are the answers, i'll confirm when I finish the test.

In an experiment it is known what quantity has to measured, thus the measurement of melting point has been determining what data to collect. Thus, Option B is correct.

To investigate the boiling point of water and ethanol, the samples has to boiled at constant parameters and the data has been collected with several trials. Thus, option C is correct.

Melting has been described as the change of the solid to the liquid state. With melting, there has been heat energy higher than the force of attraction allowing the molecules to move freely. Thus, option B is correct.

The boiling has been the change in the water at liquid state to the gaseous state. With boiling there is thermal energy capable of increasing the motion of water molecules overcoming electrostatic force.

For more information about melting, refer to the link:

https://brainly.com/question/12499685

Explanation:

it is a parallel circuit.

hope this helps you.

Answer:

An unbalanced force causes the object to change position.

Explanation:

An unbalanced force causes the object on which it is acting to accelerate, changing its position, speed, or direction due to equal forces on opposite sides.