The motor of a weed trimmer spins
at 9,000 rpm. The amount of time
required for the motor to reach this
speed would NOT be affected by...
A. the distribution of
trimmer line inside the
spool
B. the mass of the spool
containing the trimmer
line
C. the direction in which
the torque is applied

Answer:

6.52 m/s

1.72 m/s

5.38 m/s

Explanation:

this question requires us to find the average velocity.

1. velocity in straight down direction:

velocity = distance/time

= 15.0/2.30

= 6.52 m/s

2. velocity in straight backward direction:

velocity = distance/time

= 3.00 /1.74

= 1.72m/s

3. velocity in straight forward direction

velocity = distance/time

= 28.0/5.20

= 5.38 m/s

these are the his velocities for each if the intervals.

thank you!

Answer:

RThe answer is Reflection....

Answer:

Workdone = -2730 J

Explanation:

Formula for workdone is;

W = Force × Displacement

Now, according to Newton's 3rd law of motion, to every action, there is an equal and opposite reaction.

In the question given, we are told that a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus. This means that the force exerted by the rope on Magnus acts in an opposite direction to that which Magnus does to the rope.

Therefore, the force will be in the negative direction.

So;

Workdone = -2100 N × 1.3 m

Workdone = -2730 J

Answer:

so easy add the subtract then multiplay the add

Explanation:

Answer:

ACD

Explanation:

according to it's description above

The wave is a mechanical wave and can also be sound wave also the wave is a longitudinal wave. The correct option is A, C, and D.

A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.

A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.

Waves like mechanical waves require a medium to travel through. Non-mechanical waves are those that can travel through any medium.

Mechanical waves include, but are not limited to, sound waves, water waves, and seismic waves.

The three claims are accurate as follows: The wave is a longitudinal wave and can also be a mechanical wave or a sound wave.

Thus, the correct option is A, C, and D.

For more details regarding mechanical waves, visit:

https://brainly.com/question/24459019

#SPJ5

Your question seems incomplete, the missing image is:

Answer:

h over 2 dg

Explanation:

brainliest!!!!!!!

Answer:

d velocity will be the one according to me

Answer:

Explanation:

for vertical movement , time to reach the top = time to reach the hand = 2.5 s

v = u - gt

At the top , v = 0 , time t = 2.5 s

0 = u - g x 2.5

u = 2.5 x 9.8 = 24.5 m /s

velocity of throw = 24.5 m /s

So , when it passes the hand on its way down , it will have velocity equal to 24.5 m /s and it will accelerate downwards . Let its velocity down by 22 m be v

v² = u² + 2 g s

= 24.5² + 2 x 9.8 x 22

= 600.25 + 431.2

= 1031.45

v = 32.11 m /s .

The gravitational force is determined as 7.37 x 10⁻⁷ N.

The gravitational force is determined by applying Newton's law of universal gravitation.

Mathematically, the formula for the Newton's law of universal gravitation is given as;

Fg = ( Gm₁m₂ ) / ( r² )

where;

Fg = ( 6.67 x 10⁻¹¹ x 63.7 x 9750.6 ) / ( 7.5² )

Fg = 7.37 x 10⁻⁷ N

Learn more about gravitational force here: https://brainly.com/question/72250

#SPJ1

Answer:

All of then are true

I need brainliest so I can rank up

Explanation:

Answer:

I think all options are true is the right answer

Explanation:

Mark me the brainliest plzzz

Answer: When the car speed triples, momentum also triples but Kinetic energy increases 9 times or by 9 fold.

Explanation:

The momentum of a car (an object) is

p= mv

where

m is =the mass of the object( in this case car)

v is its= velocity

While the kinetic energy is is given by the formulae

K=1/2mv²

To determine how momentum and kinetic energy of the  car changes when the speed of the object triples, We have that the new velocity,

v¹= 3v

So that  the momentum  change becomes

p¹=mv¹=m (3v)= 3mv

mv=p

therefore p¹= 3p

we can see that the momentum also triples.

And the kinetic energy change  becomes

K¹=1/2m(v¹)²= 1/2m (3v)²

= 1/2m9v²= 1/2 x m x 9 x v²=9 x1/2mv²

1/2mv²=K

K¹= Kinetic energy = 9k

but Kinetic energy increases 9 times

The question is incomplete. Here is the complete question.

Cars A nad B are racing each other along the same straight road in the following manner: Car A has a head start and is a distance [tex]D_{A}[/tex] beyond the starting line at t = 0. The starting line is at x = 0. Car A travels at a constant speed [tex]v_{A}[/tex]. Car B starts at the starting line but has a better engine than Car A and thus Car B travels at a constant speed [tex]v_{B}[/tex], which is greater than [tex]v_{A}[/tex].

Part A: How long after Car B started the race will Car B catch up with Car A? Express the time in terms of given quantities.

Part B: How far from Car B's starting line will the cars be when Car B passes Car A? Express your answer in terms of known quantities.

Answer: Part A: [tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex]

              Part B: [tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex]

Explanation: First, let's write an equation of motion for each car.

Both cars travels with constant speed. So, they are an uniform rectilinear motion and its position equation is of the form:

[tex]x=x_{0}+vt[/tex]

where

[tex]x_{0}[/tex] is initial position

v is velocity

t is time

Car A started the race at a distance. So at t = 0, initial position is [tex]D_{A}[/tex].

The equation will be:

[tex]x_{A}=D_{A}+v_{A}t[/tex]

Car B started at the starting line. So, its equation is

[tex]x_{B}=v_{B}t[/tex]

Part A: When they meet, both car are at "the same position":

[tex]D_{A}+v_{A}t=v_{B}t[/tex]

[tex]v_{B}t-v_{A}t=D_{A}[/tex]

[tex]t(v_{B}-v_{A})=D_{A}[/tex]

[tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex]

Car B meet with Car A after [tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex] units of time.

Part B: With the meeting time, we can determine the position they will be:

[tex]x_{B}=v_{B}(\frac{D_{A}}{v_{B}-v_{A}} )[/tex]

[tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex]

Since Car B started at the starting line, the distance Car B will be when it passes Car A is [tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex] units of distance.

The distance traveled by the car A and car B  should be equal to the as they meet at the same position.

The time car B will catch the car A after is,

[tex]\dfrac{D_A}{v_B-v_A}[/tex]

The distance is the product of the speed of the body and the time taken to travel the distance.

Given information-

Car A has a head start and is a distance DA beyond the starting line at,

[tex]t=0[/tex]

Car A travels at a constant speed [tex]v_A[/tex].

Car B travels at a constant speed [tex]v_B[/tex].

The distance is the product of the speed of the body and the time taken to travel the distance.

The position equation from the motion for car A can be given as,

[tex]x_A=v_At+D_A[/tex]

The position equation from the motion for car B can be given as,

[tex]x_B=v_Bt[/tex]

The distance traveled by the car A and car B  should be equal to the as they meet at the same position. Thus,

[tex]x_A=x_B[/tex]

Put the values,

[tex]v_At+D_A=v_Bt\\v_At-v_Bt=-D_A\\t(v_B-v_A)=D_A\\t=\dfrac{D_A}{v_B-v_A}[/tex]

Hence the time car B will catch the car A after is,

[tex]\dfrac{D_A}{v_B-v_A}[/tex]

Learn more about the speed of the object here;

https://brainly.com/question/4931057

Answer:

A)

The impulse that reaches the cell phone first is the Longitudinal wave

B)  0.0206  seconds

Explanation:

length of Iron rail = 7.5 m

speed of sound in Iron = 5950 m/s

speed of sound in Air = 343 m/s

A) Determine which pulse reaches the cell phone first

The impulse that reaches the cell phone first is the Longitudinal wave

 Time for longitudinal pulse to be detected =  7.5 / 5950 = 0.00126 s

  Time for pulse through air to be detected = 7.5 / 343 = 0.02186  s

B) separation in time between the arrivals of the two pulses

   ΔT = 0.02186 - 0.00126  = 0.0206  seconds

Answer:

I believe you put how you think you'd feel it's that simple

Answer:

utilizing positive values

Explanation:

Answer:

They have the same acceleration of 0.5m/s2 (please note m/s2 is the unit for acceleration and 2 is the power of s)

Explanation:

acceleration= velocity ÷ time

and the time is said to be 10seconds

velocity of car will be the new velocity- the initial velocity = 27-22= 5

acceleration= 5÷10

acceleration= 0.5

hope this helped

now hit that crown button :)

Answer:

a. Vc = 5.06 m/s

b. Vp =  22.18 m/s

Explanation:

The acceleration of the pulley-mass system is as follows:

a = [tex]\frac{mg}{m + M}[/tex]

Solving for acceleration, we get:  

a = [tex]\frac{6.17 *9.8}{6.17 + 55.6}[/tex]

a = 0.97

So, for the part a:

Calculate the velocity of the crewman by using the following equation:

Vc = [tex]\sqrt{Vi^{2} + 2ay}[/tex]

Substituting the values into the equation, we get:

Vc = [tex]\sqrt{1.50^{2} + 2*0.97*13.2}[/tex]

Vc = 5.06 m/s

Now, for part b:

Calculate the final velocity of the pulley by using the following expression:

Vp = [tex]\sqrt{Vi^{2} +2gy }[/tex]

Just plugging in the values.

Vp = [tex]\sqrt{5.06^{2} +2*9.8*23.8 }[/tex]

Vp =  22.18 m/s

Answer:

a. volume of gas:  (decreases)

b. temperature of gas:  (same)

c. internal energy of gas: (same)

d. pressure of gas: (increases)

Explanation:

We have a gas (let's suppose that is ideal) in a piston with a fixed volume V.

Then we put in a reservoir at 0°C (the mixture of water and ice)

remember that the state equation for an ideal gas is:

P*V = n*R*T

and:

U = c*n*R*T

where:

P = pressure

V = volume

n = number of mols

R = constant

c = constant

T = temperature.

Now, we have equilibrium at T = 0°C, then we can assume that T is also a constant.

Then in the equation:

P*V = n*R*T

all the terms in the left side are constants.

P*V = constant

And knowing that:

U = c*n*R*T

then:

n*R*T = U/c

We can replace it in the other equation to get:

P*V = U/c = constant.

Now, the piston is (slowly) moving inwards, then:

a) Volume of the gas: as the piston moves inwards, the volume where the gas can be is smaller, then the volume of the gas decreases.

b) temperature of the gas: we know that the gas is a thermal equilibrium with the mixture (this happens because we are in a slow process) then the temperature of the gas does not change.

c) Internal energy of the gas:

we have:

P*V = n*R*T = constant

and:

P*V = U/c = constant.

Then:

U = c*Constant

This means that the internal energy does not change.

d) Pressure of the gas:

Here we can use the relation:

P*V = constant

then:

P = (constant)/V

Now, if V decreases, the denominator in that equation will be smaller. We know that if we decrease the value of the denominator, the value of the quotient increases.

And the quotient is equal to P.

Then if the volume decreases, we will see that the pressure increases.

Answer:

1) The total charge of the top plate is 0.008 C

b) The total charge of the bottom plate is -0.008 C

2) The electric field at the point exactly midway between the plates is 0

3) The electric field between plates is approximately 1.1294 × 10¹² N/C

4) The force on an electron in the middle of the two plates is approximately 1.807 × 10⁻⁷ N

Explanation:

The given parameters of the parallel plate capacitor are;

The dimensions of the plates = 4 × 2 cm

The distance between the plates = 10 cm

The surface charge density of the top plate, σ₁ = 10 C/m²

The surface charge density of the bottom plate, σ₂ = -10 C/m²

The surface area, A = 0.04 m × 0.02 m = 0.0008 m²

1) The total charge of the top plate, Q = σ₁ × A = 0.0008 m² × 10 C/m² = 0.008 C

b) The total charge of the bottom plate, Q = σ₂ × A = 0.0008 m² × -10 C/m² = -0.008 C

2) The electrical field at the point exactly midway between the plates is given as follows;

[tex]V_{tot} = V_{q1} + V_{q2}[/tex]

[tex]V_q = \dfrac{k \cdot q}{r}[/tex]

Therefore, we have;

The distance to the midpoint between the two plates = 10 cm/2 = 5 cm = 0.05 m

[tex]V_{tot} = \dfrac{k \cdot q}{0.05} + \dfrac{k \cdot (-q)}{0.05} = \dfrac{k \cdot q}{0.05} - \dfrac{k \cdot q}{0.05} = 0[/tex]

The electric field at the point exactly midway between the plates, [tex]V_{tot}[/tex] = 0

3) The electric field, 'E', between plates is given as follows;

[tex]E =\dfrac{\sigma }{\epsilon_0 } = \dfrac{10 \ C/m^2}{8.854 \times 10^{-12} \ C^2/(N\cdot m^2)} \approx 1.1294 \times 10^{12}\ N/C[/tex]

E ≈ 1.1294 × 10¹² N/C

The electric field between plates, E ≈ 1.1294 × 10¹² N/C

4) The force on an electron in the middle of the two plates

The charge on an electron, e = -1.6 × 10⁻¹⁹ C

The force on an electron in the middle of the two plates, [tex]F_e[/tex] = E × e

∴ [tex]F_e[/tex] = 1.1294 × 10¹² N/C ×  -1.6 × 10⁻¹⁹ C ≈ 1.807 × 10⁻⁷ N

The force on an electron in the middle of the two plates, [tex]F_e[/tex] ≈ 1.807 × 10⁻⁷ N

Answer:

nope

Explanation:

sige bigyan kitang Happy pills

Answer:

The sugars produced by photosynthesis can be stored, transported throughout the tree, and converted into energy which is used to power all cellular processes. Respiration occurs when glucose (sugar produced during photosynthesis) combines with oxygen to produce useable cellular energy.

Explanation:

I think this is correct lol.

Answer:

difference between the field  = 1.56 N/C

as; 1.56 N/C is greater than 0.77 N/C;

Hence, Honeybees can detected the difference

Explanation:

Given the data in the question;

distance r = 24 cm = 0.24 m

charge 1 Q1 = +30 pC = 30×10⁻¹² C

charge 2 Q2 = +40 pC = 40×10⁻¹² C

Now, electric field due to +30 pC charge

E1 = kQ1/r²

where coulomb constant k is 9 × 10⁹ N.m²/C²

so we substitute

E1 = [( 9 × 10⁹ ) × (30×10⁻¹²)] / (0.24)²

E1 = 0.27 / 0.0576

E1 = 4.69 N/C

electric field due to +40 pC charge

E2 = kQ1/r²

E2 = [( 9 × 10⁹ ) × (40×10⁻¹²)] / (0.24)²

E2 = [( 9 × 10⁹ ) × (40×10⁻¹²)] / (0.24)²

E2 = 0.36 / 0.0576

E2 = 6.25 N/C

Now,

E2 = E1 =  6.25 N/C - 4.69 N/C = 1.56 N/C

difference between the field  = 1.56 N/C

as; 1.56 N/C is greater than 0.77 N/C;

Hence, Honeybees can detected the difference

Air resitances also know as drag is a force that is caused by air the force acts in oppsite directions to an object moving through the air ..

HOPE THIS HELP YOU ..

Answer:

Any floating object displaces a volume of water equal in weight to the object's MASS. ... If you place water and an ice cube in a cup so that the cup is entirely full to the ... If you take a one pound bottle of water and freeze it, it will still weigh one ... Fresh, liquid water has a density of 1 gram per cubic centimeter (1g = 1cm^3, ...

Answer:

Explanation:

FBEDAC

Answer:

14

Explanation:

EWAN KO LANG DIN BASTA YAN ALAM KO

Answer: I think false

Explanation:The velocity at which an object is sent moving and the mass of the object both play a hand in the level of kinetic energy that object produces. Mass and kinetic energy have a positive relationship, which means that as mass increases, kinetic energy increases, if all other factors are held constant.

Answer:

The number of electrons that surround the nucleus will determine whether or not it is electrically charged or electrically neutral

Explanation: