Answer:
A. true
Suppose A = probability of a day occurring on the weekend
B = probability of day occurring last half of weekend
A int B = 2/7 * 1/2 = 1/7
obviously a Sun can occur only 1/7 of the time
a 25.0 kg box of textbooks rests on a loading ramp that makes an angle α with the horizontal. the coefficient of kinetic friction is 0.250, and the coefficient of static friction is 0.350.
The minimum angle α that will allow the box to start sliding down the ramp is approximately 19.47 degrees.
Force of gravity pulling the box down the ramp,
F_gravity = m * g
F_gravity = 245.25 N
Normal force perpendicular to the ramp,
F_normal = m * g * cos(α)
F_normal = 25.0 kg * 9.81 m/s^2 * cos(α)
Since the box is at rest, the force of friction acting on the box is the static friction force,
F_friction = μ_static * F_normal
F_friction = 85.03 N * cos(α)
The force component of gravity acting down the ramp is,
F_gravity_parallel = m * g * sin(α)
F_gravity_parallel = 25.0 kg * 9.81 m/s^2 * sin(α)
Set up the inequality for the box to start sliding down the ramp:
F_friction ≤ F_gravity_parallel
0.350 * (25.0 kg * 9.81 m/s^2 * cos(α)) ≤ 25.0 kg * 9.81 m/s^2 * sin(α)
0.350 * cos(α) ≤ sin(α)
0.350 ≤ tan(α)
α ≥ tan^(-1)(0.350)
α ≥ 19.47 degrees
To know more about the coefficient of kinetic friction, here
brainly.com/question/13754413
#SPJ4
--The complete question is, A 25.0 kg box of textbooks rests on a loading ramp that makes an angle α with the horizontal. the coefficient of kinetic friction is 0.250, and the coefficient of static friction is 0.350. What is the minimum angle α that will allow the box to start sliding down the ramp?--
in what direction do the planets revolve around the sun?
The planets revolve around the sun in the same direction, counterclockwise, when viewed from above the North Pole of the sun. This direction is also known as prograde motion.
How is prograde motion caused?The reason for this is due to the formation of the solar system. It is believed that the planets were formed from a rotating disk of gas and dust called the solar nebula. As the nebula rotated, it flattened into a disk, and gravity caused the material to clump together, forming the planets.Since the nebula was rotating in a particular direction, the planets that formed from it inherited that same direction of rotation. This is also known as the conservation of angular momentum, which states that a rotating object will maintain its rotation unless acted upon by an external force.
There are some exceptions to this, however. Venus and Uranus have a retrograde rotation, meaning they rotate in the opposite direction to the other planets.
To know more about prograde motion , check out :
https://brainly.com/question/22921263
#SPJ4
in what ways are electric and magnetic fields similar and in what ways are they different?
what is g/cc to kg/m3 conversion?
Both g/cc (grams per cubic centimeter) and kg/m3 (kilograms per cubic meter) are units of density, with the former being more commonly used in some industries such as mining and metallurgy.
To convert from g/cc to kg/m3, you can use the following conversion factor:
1 g/cc = 1000 kg/m3
Metallurgy is the branch of science and technology that deals with the extraction, refining, and processing of metals from ores. It is an essential field that has been around since ancient times, when humans first discovered the use of metals. Metallurgists work with metals such as iron, copper, gold, and silver, among others. Metallurgy has a wide range of applications, from creating durable tools and building structures to producing energy-efficient vehicles and electronics.
The process of metallurgy involves several stages, including mining, crushing, grinding, and separating the ore from the metal. Once the metal is extracted, it undergoes refining processes to remove impurities and improve its quality. Metallurgy also involves the study of the physical, chemical, and mechanical properties of metals, as well as their behavior under different conditions.
To learn more about Metallurgy visit here:
brainly.com/question/28303708
#SPJ4
an nacl solution is prepared by dissolving 90.0 g nacl in 250.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
According to the statement, the vapor pressure of the solution is 21.08 torr.
To solve this problem, we need to calculate the mole fraction of NaCl in the solution and use it to calculate the vapor pressure of the solution.
First, let's calculate the moles of NaCl and water:
moles NaCl = 90.0 g / 58.44 g/mol = 1.54 mol
moles water = 250.0 g / 18.015 g/mol = 13.88 mol
Next, let's calculate the mole fraction of NaCl:
mole fraction NaCl = moles NaCl / (moles NaCl + moles water) = 1.54 mol / (1.54 mol + 13.88 mol) = 0.1007
Now, we can use the following equation to calculate the vapor pressure of the solution:
P solution = X water × P water
where P water is the vapor pressure of pure water and X water is the mole fraction of water in the solution. Since the mole fraction of NaCl is 1 - X water, we can rearrange the equation to solve for P solution:
P solution = (1 - X NaCl) × P water
Plugging in the values, we get:
P solution = (1 - 0.1007) × 23.56 torr = 21.08 torr
Therefore, the vapor pressure of the solution is 21.08 torr.
Learn more about NACL solution:
https://brainly.com/question/28123588
#SPJ4
A.
B.
C.
D.
E.
F.
G.
H.
The direction of the current is D
What is the right hand rule?The right hand rule is a mnemonic used to determine the direction of a vector resulting from the cross product of two other vectors. It is often used in physics and engineering to determine the direction of forces, magnetic fields, and torque.
To determine the direction of vector C, you curl your fingers from vector A towards vector B, and the direction in which your thumb points is the direction of vector C.
The right hand rule can be used to determine the direction of torque, magnetic fields, and other vector quantities that are the result of the cross product of two other vectors.
Learn more about right hand rule:https://brainly.com/question/9750730
#SPJ1
What is reductionism in simple terms?
Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler or more fundamental components.
Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler, more fundamental components or principles. It assumes that everything can be reduced to its basic building blocks, and that understanding these building blocks is sufficient to explain the behavior of more complex systems.
Reductionism has been a powerful tool for breaking down complex systems into simpler parts that can be studied and understood. It has been particularly useful in fields such as physics, where the behavior of complex systems can often be explained in terms of fundamental particles and forces. Reductionism has also been criticized for oversimplifying complex phenomena and ignoring the emergent properties that arise from interactions between components.
To learn more about Reductionism visit here:
brainly.com/question/28901579
#SPJ4
which type of radioactivity has a negative charge?
The type of radioactivity that has a negative charge is beta decay
What is beta decay?Beta decay is a type of nuclear decay that occurs when an unstable atomic nucleus emits a beta particle. Beta particles are high-energy electrons or positrons that are ejected from the nucleus during the decay process. Beta decay can occur in two ways:
Beta-minus decay (β−): In this type of beta decay, a neutron in the nucleus is converted into a proton, an electron, and an antineutrino. The electron is emitted from the nucleus as a beta particle, while the proton remains in the nucleus. The atomic number of the nucleus increases by one, while the mass number remains the same.Beta-plus decay (β+): In this type of beta decay, a proton in the nucleus is converted into a neutron, a positron, and a neutrino. The positron is emitted from the nucleus as a beta particle, while the neutron remains in the nucleus. The atomic number of the nucleus decreases by one, while the mass number remains the same.Beta decay can occur in isotopes of many elements, including carbon-14, which is used in radiocarbon dating, and iodine-131, which is used in nuclear medicine. Beta decay is also an important source of energy in nuclear power plants.
To know more about Beta Decay, visit:
https://brainly.com/question/27770519
#SPJ4
the pressure indicated by the question mark is the __________.
The pressure indicated by the question mark is systolic pressure. option a is correct.
Systolic blood pressure is the highest pressure exerted on arterial walls when the heart contracts to pump blood through the circulatory system. With each beat, the heart first contracts, pushing blood from the left ventricle into the aorta, increasing pressure in the artery.
For example, if your blood pressure is 120/80 mmHg, your systolic blood pressure is 120 mmHg. Systolic blood pressure varies with factors such as age, physical activity, stress, and general health. High systolic blood pressure over time can damage blood vessels and increase the risk of heart disease, stroke, and other health problems.
Question: The Pressure Indicated By The Question Mark Is The ___. Systolic Pressure Mean Arterial Pressure Pulse Pressure Diastolic
and image atteched.
know more about systolic pressure click here;
https://brainly.com/question/30653986
#SPJ4
what is ap physics equation sheet?
The AP Physics Equation Sheet is a resource provided by the College Board, which administers the Advanced Placement (AP) program in the United States. The AP Physics exams cover a range of topics in physics, including mechanics, electricity and magnetism, and thermodynamics, among others.
The essential equations and formulae that students could utilise on the test are included on the equation page. It is meant to aid in exam preparation and make sure that students have access to the relevant equations.
The equation sheet contains formulae for many different physical quantities, including, but not limited to, force, energy, power, velocity, acceleration, and electric charge. Formulas for specific subjects are also included, including those for Newton's equations of motion, work and energy, momentum and collisions, and electric circuits.
During the exam, students are permitted to utilise the AP Physics Equation Sheet, but it is assumed that they are already familiar with the equations and know how to use them to answer questions.
The equation sheet is not a replacement for a thorough comprehension of the fundamental ideas and tenets of physics.
For such more questions on ap physics sheet:
brainly.com/question/30639507
#SPJ4
a collection of 6.25×1018 electrons has the charge of
With a total charge of roughly 1.0 Coulomb, a group of 6.25 x 1018 electrons can be measured.
A single electron has a charge of about 1.602 x 10-19 Coulombs.
We can multiply the quantity of electrons by the charge of a single electron to determine the total charge of a group of electrons:
Total charge = (electron count) x (charge of a single electron)
Total charge is 1.602 x 10-19 C/electron x 6.25 x 10-18 electrons.
Charge total = 1.0 C
As a result, a group of 6.25 x 1018 electrons has an about 1.0 Coulomb overall charge.This calculation can be useful in many contexts, such as in the study of electric circuits, electromagnetism, and semiconductor devices.
Learn more about electron here:
https://brainly.com/question/1255220
#SPJ4
We can make simple model of the human vocal tract as an open-closed tube extending from the opening of the mouth to the diaphragm. What is the length of this tube if its fundamental frequency equals typical speech frequency of 250 Hz? The speed of sound in the warm air is 350 m/s:
The length of the tube that would result in a fundamental frequency of 250 Hz is approximately 0.7 meters. Keep in mind that this is a simple model and the actual length of the human vocal tract is much more complex and varies between individuals.
What is frequency?
The frequency of a wave is the number of complete cycles of the wave that occur in a unit of time, usually measured in hertz (Hz). It is a measure of how many oscillations or vibrations occur in a given time period.
Calculation:
The fundamental frequency of a tube is given by the formula:
f = v/2L
where v is the speed of sound in the air, and L is the length of the tube.
By rearranging the equation, we can find the length of the tube:
L = v/2f = (350 m/s) / (2 * 250 Hz) = 0.7 m.
To know more about frequency, visit:
brainly.com/question/27151918
#SPJ4
Submit Activity Log Week 2
Submit your completed Activity Log for this week here.
Please complete each area and make sure to include dates on your activity log.
Each activity log should include one week of physical activities.
A full week includes Monday - Sunday. Include at least 3 days of the same week. Full credit will only be given if all sections are completed.
Be sure to complete the heart rate section.
Please complete each area to receive full credit
Below is my activity log for for a week starting from Monday, February 20th, 2023 to Sunday, February 26th, 2023:
Monday, February 20th:
7:00am: 30-minute yoga session at home
12:00pm: 1-hour strength training at the gym
6:00pm: 30-minute jog around the neighborhood
What is the physical activities?Tuesday, February 21st:
8:00am: 45-minute indoor cycling class at the gym2:00pm: 30-minute walk during lunch break6:00pm: 45-minute hot yoga session at the studioWednesday, February 22nd:
7:00am: 30-minute HIIT workout at home1:00pm: 1-hour basketball game with friends at the park5:00pm: 30-minute jog around the parkThursday, February 23rd:
8:00am: 45-minute indoor rowing class at the gym2:00pm: 30-minute walk during lunch break6:00pm: 45-minute Pilates session at the studioFriday, February 24th:
7:00am: 30-minute strength training at home1:00pm: 1-hour Zumba class at the gym5:00pm: 30-minute jog around the neighborhoodSaturday, February 25th:
9:00am: 1-hour hike in the nearby nature reserve2:00pm: 30-minute swim at the community pool6:00pm: 45-minute kickboxing class at the gymSunday, February 26th:
10:00am: 1-hour yoga session at the park3:00pm: 30-minute walk around the lake7:00pm: 30-minute jog around the neighborhoodTherefore, this week consisted of a mix of cardio, strength training, and flexibility exercises. The activities varied between indoor and outdoor, as well as group and individual workouts. The inclusion of different activities helps to keep things interesting and maintain motivation.
Learn more about physical activities from
https://brainly.com/question/1744272
#SPJ1
A solid cylinder with a mass of 2. 53 kg and a
radius of 0. 026 m starts from rest at a height
of 2. 70 m and rolls down a 46. 8
◦
slope. What is the translational speed of the cylinder when it leaves the incline? The acceleration of gravity is 9. 81 m/s
2. Answer in units of m/s
The translational speed of the cylinder when it leaves the incline is 3.28 m/s.
To solve this problem, we need to use the conservation of energy principle, which states that the initial potential energy of the cylinder is equal to its final kinetic energy plus any remaining potential energy.
The initial potential energy of the cylinder is given by:
U_i = mgh
where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we get:
U_i = (2.53 kg)(9.81 m/s^2)(2.70 m) = 68.9 J
The final kinetic energy of the cylinder is given by:
K_f = (1/2)mv^2
where v is the translational speed of the cylinder when it leaves the incline. We also know that the cylinder will have rotational kinetic energy due to its rolling motion, given by:
K_rot = (1/2)Iω^2
where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by:
I = (1/2)mr^2
and the angular velocity is related to the translational speed by:
ω = v/r
Substituting these equations and simplifying, we get:
K_f + K_rot = (1/2)mv^2 + (1/4)mv^2
K_f + K_rot = (3/4)mv^2
Now, let's calculate the final potential energy of the cylinder. At the bottom of the incline, the cylinder will have a height of zero, so its potential energy will be:
U_f = mgh_cos(θ)
where θ is the angle of the incline. Substituting the given values, we get:
U_f = (2.53 kg)(9.81 m/s^2)(2.70 m)cos(46.8°) = 29.3 J
Using the conservation of energy principle, we can equate the initial potential energy to the final kinetic energy plus the final potential energy:
U_i = K_f + K_rot + U_f
Substituting the equations we derived earlier and simplifying, we get:
68.9 J = (3/4)mv^2 + 29.3 J
Solving for v, we get:
v = sqrt[(4/3)(68.9 J - 29.3 J)/m] = 3.28 m/s
Learn more about translational speed here
brainly.com/question/15443379
#SPJ4
suppose you have two metal cubes, one made of iron and one made of aluminum. you transfer the same amount of heat q to each of them. which cube will have the higher final temperature, given they have the same masses and initial temperatures?
The ultimate temperature of the iron cube will be greater than that of the aluminium cube.
The amount of heat needed to increase a substance's temperature by one degree Celsius in one gramme, also known as specific heat.
Typically, calories or joules per gramme per degree Celsius are used as the units of specific heat.
In comparison to iron, aluminium has a specific heat capacity that is nearly three times higher.
As a result, to raise aluminum's temperature by the same amount as iron, three times as much heat is needed.
The temperature change of the aluminium cube will be three times smaller than that of the iron cube when the same amount of heat q is applied to each cube.
Consequently, the iron cube's ultimate temperature will be greater than the aluminium cube's.
For such more questions on Temperature
https://brainly.com/question/24746268
#SPJ4
what percentage of earth is covered in snow and ice? a) 5% b) 10% c) 15% d) 20%
The correct answer is d) 20%. Approximately 20% of the Earth's surface is covered in snow and ice.
What is the percentage of Earth?This includes the polar ice caps, glaciers, and sea ice. The majority of the ice and snow cover is found in the polar regions, where it plays an important role in the Earth's climate and affects global sea levels.
It's worth noting that the amount of ice and snow cover on the Earth's surface is constantly changing due to various factors, including changes in temperature and precipitation, as well as human activities such as deforestation and greenhouse gas emissions.
To know more about earth , visit:
https://brainly.com/question/12041467?referrer=searchResults
#SPJ4
The slit opening is a = 10 mm and the distance between the slit and the screen is L = 3 m. Calculate l for light of wavelength 500 nm.
The initial maxima speed for light with a 500 nm wavelength is 5 mm/s.
How is the calculation for light diffraction done?Hence, given the distance to a screen, the breadth of the slit, and the wavelength of the light, we can apply the equation y = L l / a to pinpoint the location of the initial diffraction minimum with in single slit diffraction pattern.
Its Type III dispersion is intended for applications such general carparks and streets where a larger illumination area is required. Type III lighting must be placed to one side of the area in order for it to illuminate the entire area. As a result, there's a filling light flow.
According to the given data:Distance between slits and screenD=3m
Distance between slits d=10 mm
Speed v=4 m/s
v β =5×10 −3 m/s
= 5 mm/s
To know more about slit diffraction visit:
brainly.com/question/29451443
#SPJ1
when was the first nhl all-star skills competition held?
The first National Hockey League (NHL) All-Star Skills Competition was held in 1990.
What is National Hockey League(NHL)?The National Hockey League (NHL) is a professional ice hockey league composed of 31 teams, 24 of which are based in the United States and 7 in Canada. The NHL is widely considered to be the premier professional ice hockey league in the world and is among the oldest North American sports organisations.
The league operates on a system of promotion and relegation, with the bottom teams in each division being required to compete in a qualifying tournament to retain their place in the league, while the top teams compete in the Stanley Cup Playoffs to determine the NHL champion.
The NHL regular season typically runs from October to April, with each team playing a total of 82 games. The league also holds an All-Star Game, which is a showcase of the league's best players and features various skills competitions. The NHL has a strong following and is popular both in North America and internationally.
To know more about National Hockey League, visit:
https://brainly.com/question/29359031
#SPJ4
what property of earthquakes does the richter scale measure?
The Richter scale is a logarithmic scale for measures the magnitude or intensity of an earthquake. It was developed in 1935 by Charles Richter and is used to measure the size of earthquakes all over the world.
The scale ranges from 0 to 10, with each level representing a ten-fold increase in ground shaking. The Richter scale is based on the amplitude of the seismic waves recorded on a seismograph.
These waves are used to accurately measure the size of an earthquake. The higher the magnitude of an earthquake, the more intense the shaking and the greater the damage it can cause.
The Richter scale is a valuable tool for studying earthquakes and assessing their potential to cause destruction.
It is also used to compare the size of different earthquakes and helps scientists to better understand how they form and how they can be managed.
To know more about Richter scale,
https://brainly.com/question/24037139
#SPJ4
what units do we use to measure the force of gravity?
Normally, Newtons are used to measure the gravitational force (N).
When two mass-containing objects are in close proximity to one another, a force of some sort is produced. It is pointed in the direction of the larger object's centre and has a magnitude that is dependent on the masses of the two objects and their separation. The force needed to accelerate a mass of one kilogram at a pace of one meter per second squared is known as the Newton (N), and it is represented by the symbol N. Gravitation is a significant force in many branches of research and engineering, including physics, astronomy, and aerospace, and it may be measured using a variety of tools, such as a spring scale or a balance.
Learn more about significant force here:
https://brainly.com/question/29897437
#SPJ4
The doppler effect applies to light waves as well as sound waves. Astronomers use this to measure the motion of stars and galaxies. In 1929, edwin hubble discovered that light from distant galaxies was shifted away from the blue end of the spectrum and toward the red end of the spectrum. Red light or red shifted was shifted away from the blue end of the spectrum and towards the red end of the spectrum. Red light has a longer wavelength and lower frequency than blue light. What could hubble conclude about these galaxies?.
Hubble's observation of redshift in the light from distant galaxies led him to conclude that the galaxies were moving away from us.
How is doppler's effect applied ?His discovery gave compelling proof that the universe is expanding since it suggested that the galaxies are all veering away from one another. A method for examining the large-scale structure and history of the universe is also made possible by the degree of redshift, which can be used to estimate the galaxy's distance from Earth and motion speed.To know more about doppler's effect , check out :
https://brainly.com/question/28106478
#SPJ4
A 6-kg bucket of water is being pulled straight up by a string at a constant speed.
The tension on the string is 58.8N
What does a string's tension force mean?
The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire. Every physical object in contact with another one applies some force to that object.
The pull that is designated as tension is in that direction. As a result, the tension will point toward the string or rope and away from the mass. When a mass is hanging, the string pulls it upward, applying an upper force, which causes the tension to be on the upper side.
F = ma
F = 6kg * 9.8 m/s2
F = 58.8 N.
To learn more about tension use link below:
https://brainly.com/question/24994188
#SPJ4
The two most obvious physical changes seen in early childhood include a growth in height and an increase in........
During early childhood, which is the period between the ages of two and six years, children undergo significant physical changes in terms of their height and weight.
What do they experience in their height and weight ?This growth in height is primarily due to the growth and development of the long bones in the body, which lengthen as new bone tissue is added at the growth plates located at the ends of the bones. Growth hormone, which is produced by the pituitary gland, plays a crucial role in this process by stimulating the growth of bone and muscle tissue.This increase in weight is primarily due to the growth and development of muscle and fat tissue, which are necessary for energy storage, metabolism, and physical activity. Adequate nutrition is essential for this process, and young children require a diet that is rich in nutrients such as protein, carbohydrates, and fats to support their growth and development.Overall, these changes in height and weight during early childhood are important milestones in a child's physical development, and they provide a foundation for their future growth and well-being.To know more about height and weight , check out :
https://brainly.com/question/1419462
#SPJ4
Suppose that a motorboat is moving at 83 ft/s when its motor suddenly quits, and that 1 s later the boat has slowed to 23 ft/s. Assume that the resistance it encounters while coasting is proportional to the square of its velocity so that dvdt=−kv2 where k > 0. How far will the boat coast in the first 2 minutes after its motor quits?
The boat travels approximately 0.011 ft, or about 0.13 inches, during the first 2 minutes after its motor quits.
We can use the approach of separation of variables to solve the differential equation dv/dt = -kv2, which describes the boat's speed as it coasts. Using integration and variable separation, we obtain:
∫ 1/v²dv = - ∫ kdt
Solving for v, we get,
v(t) = 1/(kt + C)
where C is the constant of integration. To find the value of C, we can use the initial condition that the boat is moving at 83 ft/s when its motor quits. Thus, at t=0, v(0)= 83, which gives:
C = 1/83
Now, we can use the equation for v(t) to find the distance traveled by boat during the first 2 minutes (120 seconds) after its motor quits. The distance traveled is given by the integral:
∫ 1/(kt + C)² dt
Substituting the values of k and C, we get:
∫ 82²/(83t + 1)² dt
Using a substitution u = 83t + 1, we get:
(1/83) ∫ du/u^2
Integrating and evaluating the integral between 1 and 241, we get:
(1/83)(1 - 1/241) = 0.011 ft
Therefore, the boat travels approximately 0.011 ft, or about 0.13 inches, during the first 2 minutes after its motor quits.
To learn more about differential equations visit here:
https://brainly.com/question/14620493
#SPJ4
An object floats in water. The object is broken into 5 pieces and one of those pieces is placed into the water. What will the object do?
Answer:
if the object can sink it will sink but if the object can float it will float
What is the difference between angular momentum and linear momentum?
Answer:
Linear momentum is of an object traveling in a straight line. Angular momentum is when the object is spinning.
Explanation:
The weight of an object is the product of its mass m and the acceleration of gravity.
The weight of object is the product of its mass, m, and the acceleration of gravity, g (where g=9.8 m/s2 ). Therefore, If an object’s mass is m=10 kg, its weight will be 98 Newton.
Mass is the amount of matter in a body or a substance. It is measured in kilograms and is measured using a beam balance. Mass of an object or a body remains constant everywhere that is, it does not change with the gravitational pull or with the body’s location.
Weight is the measure of the gravitational pull of gravity of an object. It is measured in Newton using a spring balance. It is direction is towards the center of the planet and is a vector quantity. Weight changes with location of a body or gravitational acceleration as it is dependent on gravity.
It changes depending on the amount of gravitational pull exerted by an object on a body, such that the more the gravity the heavier the object and the less gravity the lighter the object.
By multiplying the mass of a body by the gravitational acceleration we get the weight.
i.e., Weight = mass (M) x gravitation pull (g)
W = Mg
= 10 Kg x 9.8 N/m2
= 98 N
Therefore, A body with a mass of 10 Kg on a surface with a gravitational acceleration of 9.8 m/s2 will have a weight equivalent to 98 N .
To learn more about weight of the object,
brainly.com/question/23832929
#SP J4
The correct question is:
The weight of an object is the product of its mass, m , and the acceleration of gravity, g (where g=9.8 m/s 2 ). If an object’s mass is m=10. kg , what is its weight?
Describing the Relationship between Force and Collision Time
Your class is performing an experiment which involves dropping an object from a great height. Your job is to minimize the damage to the object. Use your knowledge of momentum, force, and collision time to complete the sentence, using the drop-down menus.
While the change in{ ? }will remain the same during a collision, the force needed to bring an object to a stop can be{ ? }if the time of the collision is{ ? }
PLEASE HELP ASAP!!
The words that complete the blanks are momentum, decreased and increased.
What is the momentum?Momentum is a property of an object that is moving and is defined as the product of its mass and velocity. Mathematically, momentum (p) is given by the equation:
p = m * v
where:
p = momentum
m = mass of the object
v = velocity of the object
Momentum is a vector quantity, which means it has both magnitude and direction. The direction of momentum is the same as the direction of the velocity.
Learn more about momentum:https://brainly.com/question/30677308
#SPJ1
Suppose you have two metal cubes, one made of iron and one made of aluminum. You transfer the same amount of heat Q to each of them. Which cube will have the higher final temperature, given they have the same masses and initial temperatures?
a. Iron Cube
b. Aluminum Cube
The iron cube will have the higher final temperature if both cubes have the same mass and are initially at the same temperature.
What are the characteristics of iron?
1. Iron is a malleable and ductile metal, meaning it can be bent and shaped without breaking.
2. It has a high melting point, making it useful in a variety of applications.
3. Iron is relatively abundant and inexpensive, making it an ideal material for a variety of construction and manufacturing uses.
4. Iron is highly reactive and can corrode easily, so it must be protected with a coating or alloying elements like chromium or nickel to prevent rusting.
5. Iron is a strong and durable metal, making it ideal for structural applications.
The equation for the final temperature is, Delta*T = Q/(c.m) The specific heat, c of aluminum is greater than that of iron. Iron has a higher heat capacity than aluminum, which means that it takes more heat to raise the temperature of a given mass of iron by a certain amount compared to aluminum. When the same amount of heat Q is transferred to both the iron and aluminum cubes, the iron cube will absorb more heat due to its higher heat capacity, resulting in a higher final temperature for the iron cube.
Therefore, iron cube is the correct answer.
To learn more about iron from the link
https://brainly.com/question/14964747
#SPJ4
Thermodynamics is from the Greek root meaning movement of heat. "The study of heat and its transformation into different forms of energy." True/False?
True, Thermodynamics is from the Greek root meaning movement of heat. "The study of heat and its transformation into different forms of energy."
What does Thermodynamics mean?Thermodynamics is the study of the relationship between energy and work. It deals with the transfer and transformation of energy from one form to another, as well as the effects of these transformations on the physical and chemical properties of matter. The fundamental laws of thermodynamics describe how energy is converted from one form to another and how energy, matter, and entropy interact. Thermodynamics is used to explain a wide variety of physical phenomena, from the behaviour of microscopic particles to the evolution of stars. In short, thermodynamics is the science of energy.
To know more about Thermodynamics, visit:
https://brainly.com/question/13059309
#SPJ4