Answer:
9155 years old
Explanation:
We use the following expression for the decay of a substance:
[tex]N = N_0\,\,e^{-k*t}[/tex]
So we first estimate the value of k knowing that the half-life of the C14 is 5730 years:
[tex]N = N_0\,\,e^{-k*t}\\N_0/2=N_0\,\,e^{-k*5730}\\1/2 = e^{-k*5730}\\ln(1/2)=-k*5730\\k= 0.00012[/tex]
so, now we can estimate the age of the artifact by solving for"t" in the equation:
[tex]1/3=e^{-0.00012*t}\\ln(1/3)= -0.00012*t\\t=9155. 102[/tex]
which we can round to 9155 years old.
A 21.2 kg mass falls from a height of 4.000m. The momentum of the mass just before it hits the ground is
A. 144.2
B. 187.8
C. 320.0
D. 442.4
E. 502.1
By third equation of motion -
[tex]\green{ \underline { \boxed{ \sf{v^2-u^2=2aS}}}}[/tex]
where
v= final velocityu = initial velocitya = accelerationS = distance travelledPutting Values to find final velocity of mass before hitting the ground-
[tex]\begin{gathered}\\\implies\quad \sf v^2-(0)^2=2\times g \times 4 \quad (g = acceleration \: due \:to \: gravity) \\\end{gathered} [/tex]
[tex]\begin{gathered}\\\implies\quad \sf v^2=2\times 9.8 \times 4\quad (g= 9.8 \:m/s) \\\end{gathered} [/tex]
[tex]\begin{gathered}\\\implies\quad \sf v=\sqrt{78.6} \\\end{gathered} [/tex]
[tex]\begin{gathered}\\\implies\quad \sf v= 8.86 \:m/s \\\end{gathered} [/tex]
Now finding the momentum of the mass at that moment -
[tex]\green{ \underline { \boxed{ \sf{Momentum= mass \times velocity}}}}[/tex]
[tex]\begin{gathered}\\\implies\quad \sf Momentum= 21.2 \times 8.86 \\\end{gathered} [/tex]
[tex]\begin{gathered}\\\implies\quad \sf Momentum= 187.8 \:kgms^{-1} \\\end{gathered} [/tex]
[tex]\longrightarrow[/tex]The momentum of the mass just before it hits the ground is 187.8 kgm/s
[tex]\\[/tex]
[tex]\therefore \sf Option \: B) \: is \:correct [/tex]✔️
Which statements describe kinetic and potential energy? Check all that apply.
Energy can be stored in the position of an object.
Energy is not present in a moving object.
Energy can be stored in the position of the particles that make up a substance.
Energy exists as movement of the particles of a substance.
Energy is greater in faster-moving particles than in slower-moving particles.
Energy is lower in objects with greater mass than in objects with less mass.
Answer:
First option, third option, fourth option, and the fifth option.
Explanation:
Kinetic energy is energy an object has when it's motion, the greater the speed the greater the kinetic energy. For example, a car moving and increasing in speed is kinetic energy since the object is in motion. If the car stops and parks in a parking lot that is potential energy. Potential energy is the amount of energy an object has when it's at rest or not in motion.
So, the answer for this question is as followed first option or "energy can be stored in the position of an object." Third option or "Energy can be stored in the position of the particles that make up a substance." Fourth option or "Energy exists as movement of the particles of a substance." The last answer will be the fifth option or "Energy is greater in faster-moving particles than in slower-moving particles."
Hope this helps.
Problem 3
A car starts from rest at constant acceleration of 2.0 m/s2. At the same instant a truck travelling with a constant
speed of 10 m/s overtakes and passes the car.
(a) How far beyond the starting point will the car overtake the truck?
Answer:
100m
Explanation:
Equation of motion for he truck: s=ut
Equation of motion for the car: s=1/2at^2
the second solution gives , s=2u^2/a = 2*10^2/2 = 100m
A boy of mass 40kg eats bananas contains of 980 joule. If this energy is used to lift him up from ground,the height to which he can climb is
Answer:
h = 2.49 [m]
Explanation:
In order to solve this problem we must use the definition of potential energy, which tells us that energy is equal to the product of mass by gravity by height.
The potential energy can be calculated by means of this equation:
Ep = m*g*h
where:
Ep = potential energy = 980 [J]
m = mass = 40 [kg]
g = gravity acceleration = 9.81 [m/s^2]
h = elevation [m]
Now replacing:
980 = 40*9.81*h
h = 2.49 [m]
(based on 15-103 in the text) At an initial instant, a 4-lb ball B is traveling around in a circle of radius r1 = 3 ft with a speed (vB)1 = 4.8 ft/s. The attached cord is then pulled down through the hole with a constant speed vr = 2.2 ft/s. a. Determine the ball's speed at the instant r2 = 2 ft. Neglect friction and the size of the ball. Note that particle path is no longer of constant radius, and the particle has velocity components in both tangential and radial directions. b. How much work is done to pull down the cord from the initial instant to the instant when r2 = 2 ft? Neglect friction and the size o
Answer:
a
[tex]v_r =8.65 \ ft/s [/tex]
b
[tex] W_{1-2} = 3.24 \ ft \cdot lb[/tex]
Explanation:
From the question we are told that
The mass of the ball is [tex]m = 4 \ lb[/tex]
The radius is [tex]r= 3 \ ft[/tex]
The speed is [tex]v_B_1 = 4.8 \ ft /s[/tex]
The speed of the attached cord is [tex]v_c =2.2 \ ft[/tex]
The position that is been considered is [tex]r_1 = 2 \ ft[/tex]h
Generally according to the law of angular momentum conservation
[tex]L_a = L_b[/tex]
Here [tex]L_a[/tex] is the initial momentum of the ball which is mathematically represented as
[tex]L_a = m* v_B_1 * r[/tex]
while
[tex]L_b[/tex] is the momentum of the ball at r = 2 ft which is mathematically represented as
[tex]L_a = m* v_B_2 * r_1[/tex]
So
[tex]m* v_B_1 * r = m* v_B_2 * r_1[/tex]
=> [tex] 4.8 * 3 = v_B_2 * 2[/tex]
=> [tex] v_B_2 = 7.2 \ ft/s [/tex]
Generally the resultant velocity of the ball is
[tex]v_r = \sqrt{v_B_2^2 + v_B_1^2 }[/tex]
=> [tex]v_r = \sqrt{7.2^2 + 4.8^2 }[/tex]
=> [tex]v_r =8.65 \ ft/s [/tex]
Generally according to equation for principle of work and energy we have that
[tex]K_1 + \sum W_{1-2} = K_2[/tex]
Here [tex]K_1[/tex] is the initial kinetic energy of the ball which is mathematically represented as
[tex]K_1 = \frac{1}{2} * m* v_B_1^2[/tex]
While [tex]\sum W_{1-2}[/tex] is the sum of the total workdone by the ball
and [tex]K_2[/tex] is the final kinetic energy of the ball which is mathematically represented as [tex]K_2 = \frac{1}{2} * m* v_r^2[/tex]
So
[tex]\sum W_{1-2} = \frac{1}{2} * m (v_r^2 - v_B_1^2)[/tex]
Here m is the mass which is mathematically represented as
[tex]m = \frac{W}{g}[/tex] here W is the weight in lb and g is the acceleration due to gravity which is [tex]g = 32 \ ft/s^2[/tex]
So
[tex]\sum W_{1-2} = \frac{1}{2} * \frac{4}{32} * (8.65^2 - 4.8^2)[/tex]
=> [tex] W_{1-2} = 3.24 \ ft \cdot lb[/tex]
Can someone help pleaseeee
Answer:
Motion with constant velocity of magnitude 1 m/s (uniform motion) for 4 seconds in a positive direction and then for 2 seconds uniform motion with constant velocity of magnitude 3 m/s in reverse direction .
Explanation:
The graph shows a constant velocity of 1 m/s for 4 seconds in the positive direction. After that, between 4 seconds and 6 seconds, the object reverses its motion with constant velocity of magnitude 3m/s.
2. The weight of a basketball player is 6 ft and 1 12 inches. Change his height to:
a. Feet
b. Inches
C. Centimeters
d. Meters
Answer:
a feat
Explanation:
cause the mf already 7ft on the dot there is no such thing as 6 ft 12
Explain why we need to study the climate.
Answer:The current focus of climate science involves carbon dioxide (CO2)emissions. Carbon dioxide in the atmosphere acts as a blanket over the planet by trapping long wave radiation, which would otherwise radiate heat away from the planet. As the amount of carbon dioxide increases, so will its warming effect.
Explanation:
i need to know the angle of incidence, reflection, and refraction
Answer:
incident 50°
reflection 90°
refraction 20°
g A 38-g ball at the end of a string is swung in a vertical circle with a radius of 21 cm. The tangential velocity is 200.0 cm/s. Find the tension in the string:
Answer:
It depends on the location of the ball during the motion. The string tension are approximately 3.82 N (at the lowest point), 3.06 N (at the highest point), and 3.44 N (at the horizontal point).
Explanation:
Tension in the String can be determined by the Newton's 1st Law of Motion (The ball shouldn't be escaped from the trajectory). The value of [tex]\theta[/tex] indicates the angle that is measured from the vertical lines and the rope of length R)
[tex]\sum F=0\rightarrow \frac{mv^{2}}{R}+mg\cos\theta-T=0[/tex]
[tex]T=mg\cos\theta+\frac{mv^{2}}{R}[/tex]
[tex]T=(38\times10^{-3})(10)(\cos\theta)+(38\times10^{-3})\frac{2^{2}}{0.21^{2}}=0.38\cos\theta+3.44[/tex]
When the ball is at the lowest point, the value of angle [tex]\theta=0[/tex], so the string tension is approximately 3.82 N. If the ball is at the highest point the value of [tex]\theta=180^{0}[/tex], so the string tension is approximately 3.06 N, and at the horizontal point [tex]\theta=90^{0}[/tex], so the string tension is approximately 3.44 N.
Notice that the speed halfway down is not half the final speed. Another interesting point is that the final answer doesn't depend on the mass. That is really a consequence of neglecting the change in kinetic energy of Earth, which is valid when the mass of the object, the diver in this case, is much smaller than the mass of Earth. In reality, Earth also falls towards the diver, reducing the final speed, but the reduction is so minuscule it could never be measured. QUESTION Qualitatively, how will the answers change if the diver takes a running dive off the end of the board
Answer:
its speed is insignificant before the diver's speed change, so the result does not change
Explanation:
In this exercise of conservation of the momentum, the system is formed by the diver and the Earth
initial instant (before jumping)
p₀ = 0
final instant (after jumping)
[tex]p_{f}[/tex] = m v + M v²
how momentum is conserved
p₀ = p_{f}
0 = m v + M v²
v² = m / M v
since the mass of the Earth is M = 10²⁴ kg
its speed is insignificant before the diver's speed change, so the result does not change
A 50 kg cart is currently in static equilibrium. Which of the following claims is true? *
A.)The cart is experiencing unbalanced forces B.)The cart is at rest
C.)The cart is accelerating
D.)The cart is moving at a constant speed or velocity
What is the mass of a toy car if it has 5 J of potential energy and is sitting on top of a track that has a height of 2m?
(PE= m x g x h) (hint g=9.8 m/s2)
Explanation:
PE=mgh
5=m(9.8)(2)
m=5/19.6
m=0.2251 kg
m=225.1 grams
Which type of energy increases when you compress a spring?
Question 8 options:
radiant energy
kinetic energy
elastic potential energy
sound energy
Answer:
Elastic potential energy
Answer:
Elastic potential energy: increases when you compress a spring.
Explanation:
During which time Interval does the object travel approximately 10 meters?
OA. O seconds to 3 seconds
OB. 3 seconds to 5 seconds
OC. 5 seconds to 7 seconds
OD. 7 seconds to 8 seconds
OE. 8 seconds to 10 seconds
Answer:
[tex]OA. \: O \: seconds \: to \: 3 \: seconds[/tex]
A, B, or C for this question?
Answer:
A. right before it hits the ground.
Explanation:
because all the way down, it is building kinetic energy.
If, according to Newton’s Third Law, every action force has an equal reaction
force that acts in the opposite direction, why do these forces not just cancel each
other out, resulting in no net force and therefore no motion? Explain.
Answer:
They act on different objects
Explanation:
Let's say that I push a cart, the cart moves because the force is also going into the ground. Hope this makes sense.
A campus shuttle bus makes 1 revolution per second round a circular track of radius 100 cm. Determine its periodic time.
The periodic time of the campus shuttle is = 1 sec
What is periodic time ?The periodic time is also known as revolution per second is the time it takes object in motion ( revolving ) to pass through a point twice ( usually the starting position ) of the object and it calculated as :
For a simple pendulum = 2π√L/g
But a campus shuttle bus in motion
since it takes
1 revolution = 1 sec therefore the time period is = 1 sec
Hence we can conclude that the periodic time of the campus shuttle = 1 second.
Learn more about time period : https://brainly.com/question/25699025
Harry is pushing a car down a level road at 2.0 m/s with a force of 243 N. The
total force acting on the car in the opposite direction, including road friction and
air resistance, is which of the following?
a. Slightly more than 243 N.
b. Exactly equal to 243 N.
c. Slightly less than 243 N.
Answer:
C, slightly less than 243 N
Explanation:
Road friction and air resistance aren't that much on a force. Try pushing something and see how much friction there is. Not that much.
a car moving at a speed shows that the force applied to the car is greater than the frictional force and air resistance
c. Slightly less than 243 N.
Two hockey pucks are moving toward each other. The mass of the first puck is half the mass of the second puck. Initially, the first puck is going at a speed of 5.0 m/s to the right, while the second puck is going at a speed of 2.0 m/s. The first puck rebounds with a speed of 9.0 m/s. What is the final speed of the second puck
The final speed of the second puck is 5 m/s.
What is speed?Speed can be defined as the rate of change of distance with respect to time.
To calculate the final speed of the second puck, we use the formula below.
Formula:
mu+m'u' = mv+m'v'................ Equation 1Where:
m = mass of the first puckm' = mass of the second pucku = initial velocity of the first pucku = initial velocity of the second puckv = final velocity of the first puckv' = final velocity of the second puck.
Make v' the subject of the equation
v' = (mu+m'u'-mv)/m'.............. Equation 2Assuming,
The mass of the first puck is y The left direction is negative and the right direction is positiveFrom the question,
Given:
m = ym' = 2yu = 5 m/su' = -2 m/sv = -9 m/s ( rebounds)Substitute these values into equation 2
v' = [(y×5)+(2y×(-2))-(y×(-9))]/2yv' = (5y-4y+9y)/2yv' = 10y/2yv' = 5 m/sHence, The final speed of the second puck is 5 m/s.
Learn more about speed here: https://brainly.com/question/6504879
An electric light bulb has an efficiency of 18%.
400J of energy are supplied to the light bulb by electricity.
a Calculate the amount of energy transferred by light
Answer:
The answer that we got will be 22.22....
what is acceleration due to gravity?
The acceleration due to gravity is 9.8 m/s^2.
The knot at the junction is in equilibrium under the influence of four forces acting on it. The F force acts from above on the left at an angle of α with the horizontal. The 5.7 N force acts from above on the right at an angle of 50◦ with the horizontal. The 6.2 N force acts from below on the right at an angle of 44◦ with the horizontal. The 6.7 N force acts from below on the left at an angle of 43◦ with the horizontal.
1. What is the magnitude of the force F?
2. What is the angle a of the force F in the figure above?
The knot is in equilbrium, so there is no net force acting on it. Starting with the unknown force and going clockwise, denote each force by F₁, F₂, F₃, and F₄, respectively. We have
F₁ + F₂ + F₃ + F₄ = 0
Decomposing each force into horizontal and vertical components, we have
F cos(180º - α) + (5.7 N) cos(50º) + (6.2 N) cos(-44º) + (6.7 N) cos(-137º) = 0
F sin(180º - α) + (5.7 N) sin(50º) + (6.2 N) sin(-44º) + (6.7 N) sin(-137º) = 0
Recall that cos(180º - x) = - cos(x) and sin(180º - x) = sin(x), so these equations reduce to
F cos(α) ≈ - 3.22 N
F sin(α) ≈ 4.51 N
(1) Recall that for all x, sin²(x) + cos²(x) = 1. Use this identity to solve for F :
(F cos(α))² + (F sin(α))² = F ² ≈ 30.73 N² → F ≈ 5.5 N
(2) Use the definition of tangent to solve for α :
tan(α) = sin(α) / cos(α) ≈ 1.399 → α ≈ 126º
or about 54º from the horizontal from above on the left of the knot.
(a) The magnitude of the force F acting on the knot is 5.54 N.
(b) The angle α of the force F is 54.4⁰.
The given parameters:
F force at α 5.7 N force at 50⁰6.2 N force at 44⁰6.7 N force at 43⁰The net vertical force on the knot is calculated as follows;
[tex]F_y = Fsin(\alpha) + 5.7 sin(50) - 6.2 sin(44) - 6.7 sin(43)\\\\F_y = F sin(\alpha) -4.51\\\\Fsin(\alpha) = 4.51[/tex]
The net horizontal force on the knot is calculated as follows;
[tex]F_x = -F cos(\alpha) + 5.7 cos(50) + 6.2cos(44) - 6.7cos(43)\\\\F_x = -Fcos(\alpha) + 3.22\\\\Fcos(\alpha) = 3.22[/tex]
From the trig identity;
[tex]sin^2 \theta + cos^ 2 \theta = 1\\\\[/tex]
[tex](Fsin(\alpha))^2 + (Fcos(\alpha))^2 = (4.51)^2 + (3.22)^2\\\\F^2(sin^ 2\alpha + cos^2 \alpha) = 30.71\\\\F^2(1) = 30.71\\\\F = \sqrt{30.71} \\\\F = 5.54 \ N[/tex]
The angle α of the force F is calculated as follows;
[tex]Fsin(\alpha) = 4.51\\\\sin(\alpha) = \frac{4.51}{F} \\\\sin(\alpha ) = \frac{4.51}{5.54} \\\\sin(\alpha ) = 0.814\\\\\alpha = sin^{-1}(0.814)\\\\\alpha = 54.5 \ ^0[/tex]
Find the image uploaded for the complete question.
Learn more about net force here:https://brainly.com/question/12582625
When putting the ball on the tee you want half of the golf ball to _________.
Question 1 options:
be above the club
be below the club
be in front of the club
be behind the club
Answer:
be in front of the club
Explanation:
The ball should be highest off the ground for a driver. The general recommendation is that the bottom of the golf ball on a tee should be level with the top of the driver; for long and mid-irons, push the tee into the ground so that only about a quarter-inch is above ground.
48. Final Velocity Your sister drops your house keys down
to you from 4.3 m What is the velocity of the keys when you
catch them?
Answer:
There is a difference between the words 'drops' and 'throws'
If an object is dropped, it's initial velocity is 0 but if the same object is thrown, it has some initial velocity
Since 'the sister' DROPS the keys, the initial velocity will be 0 m/s
We are given:
u=0 m/s
s = 4.3 m
a = 9.8 m/s/s (gravity)
From the third equation of motion:
v² - u² = 2as
Replacing the known values
v² - (0)² = 2(9.8)(4.3)
v² = 84.28
v = 9.2 m/s (approx)
Hence, the final velocity of the keys is 9.2 m/s
a 2 kg ball traveling at 5m/s collides with a 1 kg ball at rest. After the collision the 1 kg ball moves off with a speed of 7 m/s. Find the final speed of the 2 kg ball.
When a light ray traveling in a higher index of refraction material passes into a lower index of refraction material, the light ray Group of answer choices Travels in a straight line without changing direction Bends toward the axis perpendicular to the surface between the materials Bends away from the axis perpendicular to the surface between the materials
The light ray ; ( C ) Bends away from the axis perpendicular to the surface between the materials
Snell's lawSnell's law states that the ratio of the sines of the angles of incidence is equal to the ratio of the refractive indexes of the materials surface through which the light rays pass through. therefore
As the light ray travels from a material with a higher index of refraction into a material with a lower index of refraction at the axis that is perpendicular to the surface which is in between the materials the light ray will bend away due to Snell's law .
Hence we can conclude that The light ray Bends away from the axis perpendicular to the surface between the materials.
Learn more about Index of refraction : https://brainly.com/question/10729741
You measured the length, diameter and mass of two different cylinders. In both cases, you found that the length had 3 significant figures and that length was the measurement with the fewest number of significant digits. If you found the weight densities to be 38119 N/m^3 and 38081 N/m^3 and you round these values to the correct number of significant figures, can you conclude the two cylinders are made of the same material (do they have the same weight density)?
a. Not enough information given.
b. Yes.
c. No.
Answer:
Weight Density 1 = 38100 N/m³
Weight Density 2 = 38100 N/m³
b. Yes
Explanation:
The formula for volume of cylinder is:
V = πr²l
where,
V = Volume
r = radius
l = length of cylinder
So, if length has the 3 significant figures which is least in all values, Then the volume must also be in 3 significant figures. The formula for weight density is:
Weight Density = Weight/Volume
Here, the volume has the least significant figures of 3, therefore, the weight densities must also have 3 significant figures:
Weight Density 1 = 38119 N/m³
Weight Density 1 = 38120 N/m³
Weight Density 1 = 38100 N/m³
Weight Density 2 = 38119 N/m³
Weight Density 2 = 38120 N/m³
Weight Density 2 = 38100 N/m³
Hence, the answer is:
b. Yes
this diagram shows the sectionary box sitting on the floor which statement about other force exerted on the box are true?
questions:
it's normal force exerted by the floor. it balances the gravitational force.
it's friction force exerted by the floor. it balances the gravitational force.
it's normal for exerted by the floor. does not balance the gravitational force.
it's an applied force exerted from the left. It doesn't balance the gravitational force.
Answer: A) It's a normal force exerted by the floor. It balances out the gravitational force.
The normal force pushes up which means the box doesn't go through the floor. The up and down forces are balance. If the normal force was larger than the gravitational force, then the box would be pushed up and float/jump in the air. But the box is stationary and not moving, so that's why we don't have any acceleration and the forces effectively cancel each other out. In a way you can think of it like a see-saw.
Friction would only come into play if you applied a force and were trying to move the box. Friction counteracts the applied force. If you push the box to the left, then the friction would push to the right. Friction slows down the box and it allows it to not slide forever.
.•♫•♬•You're using classroom app me too•♬•♫•.
.•♫•♬•wow it's amazing •♬•♫•.
▀▄▀▄thank you BTS✨✨✨✨▄▀▄▀
Is normal force equal to gravity?
The normal force on an object at rest on a flat surface is equal to the gravitational force on that object.
▀▄▀▄Is friction a gravitational force?
Friction is the resistance to motion of one object moving relative to another. It is not a fundamental force, like gravity or electromagnetism. Instead, scientists believe it is the result of the electromagnetic attraction between charged particles in two touching surfaces.
▀▄▀▄Can normal force be greater than gravity?
Can you imagine the situation when Normal force is greater than mg ? Yes. When an additional downward force F is applied to a mass m resting on a horizontal surface, the normal force is FN=F+mg. ... An example is the normal force on an incline plane with an angle of θ due to a mass m.▄▀▄▀▄▀▄
What is the direction of the force you applied?
An applied force is an interaction of one object on another that causes the second object to accelerate or change velocity or direction. The force can be a push, pull, or drag. The resulting direction of an object depends on the relative direction of the force on the object. A force equation is F = ma.
Kepler's work revealed that the Earth was at the center of the circular orbits of the planets at the center of the elliptical orbits of the planets orbiting the Sun in an elliptical orbit O at one focus of the elliptical orbit of the planets
Answer:
orbiting the Sun in an elliptical orbit
Explanation:
When orbits are circular, the center and the focus are the same point. For an elliptical orbit, the orbited object is at one focus of the ellipse. Kepler found planetary orbits to be elliptical with the sun at one focus.
__
As with a lot of scientific theories, it only explained some of the motion. As with a lot of scientific theories, explaining the discrepancies resulted in new discoveries.
Answer:
at one focus of the elliptical orbit of the planets.