Answer:
The sum of the kinetic energies and potential energies of all of the molecules in a substance is called the thermal energy of the substance.
1. What happens when an environment reaches its carrying capacity?
A. The population will decrease B. The population will increase
C. The resources will be unlimited
D. Nothing will happen.
Answer: b. population will decrease
Explanation:
since earth only has a finite amount of resources, it could only support a set amount of people. once these sources can no longer be used, the population will decrease because resources can no longer support the population.
Which images show chemical reactions?
Explanation:
image 3 and 4show chemical reactionsAnswer:
image 3 and 4show chemical reactions
Explanation:
After completing their tests, the students make recommendations on how to increase the final temperature of the
mixture
Based on the data in the table, select if the proposed improvements would increase or decrease the final
emperature of the mixture. Place a check mark in the appropriate box in each row.
Answer: test two
Explanation: it sits in between both
Justify why sound cannot travel through space.
Answer:
Sound does not travel at all in space. The vacuum of outer space has essentially zero air. Because sound is just vibrating air, space has no air to vibrate and therefore no sound.
rate brainliest!
The specific heat capacity of iron 0. 45 j/gk. Find the molar heat capacity for iron
Answer:
The final temperature of the sample is 21.004 °C
Explanation:
The molar heat capacity for iron is 25.130 J/g.c joules per gram per Kelvin.
What is molar heat capacity?The amount of heat needed to increase one temperature of one mole of a substance is called molar heat capacity.
By the formula [tex]\rm \Delta T^\circ c = \Delta Tk[/tex]
Given that c = 0.45 J/g.C
Molar mass of iron is 55.845
Then putting the values in the equation
[tex]c= 0.45 \times 55.845 \\\\c= 25.130 \;J/g.^\circ c[/tex]
Thus, the molar heat capacity for iron is 25.130 J/g.c
Learn more about molar heat capacity
https://brainly.com/question/6363778
#SPJ4
Which location represents a period on a periodic table?.
(PLEASE ANSWER!)
2H20 + 2Na --> 2NaOH + H2
which of these is a reactant in this chemical reaction?
A. hydrogen
B. nitrogen
C. oxygen
D. water
Answer:
Water (H2O) and Sodium (Na) are reactants.
Explanation:
2H2O+2Na......2NaOH+H2
In the above reaction the water (H2O) and sodium (Na) are reactants and sodium hydroxide (NaOH) and hydrogen are products.
And this is the single displacement reaction.
Write some of the chemical and physical properties and uses of each natural resource shown in the photos below.
Two posssible lewis structures for the molecule ch2s are given. determine the formal charge on each atom in both structures
The formal charge on each atom can be known by counting up the number of valence electrons that is present on each atom.
What is Lewis structure?The term Lewis structure is the representation of a compound using its symbols and showing the valence electrons as dots. This question is incomplete as the Lewis structures were not shown.
If it is shown, we can know the formal charge on each atom by counting up the number of valence electrons that is present on each atom.
Learn more about Lewis structure: https://brainly.com/question/4144781
What do the neural pathways for taste, hearing, sight, and touch have in common
Answer:
All of the signals pass through the thalamus
Explanation:
I have 5 questions that need help to answer 1) What are covalent bonds and how do they form ? 2) How do you know which elements and how many of each are in a compound ?
3) How can you find how many valence electrons an atom has ?
4) How many valence electrons do atoms need to be happy? Which elements are the exceptions?
Answer:
covalent bond- a chemical bond that is the sharing of electron pairs between atoms
what describes the equivalence point on a graph of pH versus the amount of titrant added to a solution
Answer:
Titrant and analyte is a pair of acid and base. ... Equivalence point: point in titration at which the amount of titrant added is just enough to completely neutralize the analyte solution. At the equivalence point in an acid-base titration, moles of base = moles of acid and the solution only contains salt and water.
Explanation:
What is the Electronegativity difference of C and S?
Answer:
S 2.6 [2.58] & C is 2.6 [2.55]
Explanation:
Tear off a small, flat sheet of waxed paper. Use the pipette to dispense a drop of water on the waxed paper. Now, dry the pipette, and use it to dispense a drop of oil on the waxed paper next to the water drop. Be sure the two drops are not touching. Compare and describe the appearance of both drops.
Answer:
Explanation:
When comparing the drops of oil and water, one thing I noticed was the shape. The water drop was more defined, whereas the drop of oil began to spread and was much flatter. This may be due to the waxy material, and how both oil and water react to the wax.
One mole of copper atoms is 6.02 x 1023 copper atoms.
True or false?
Answer:
Explanation:
The relation between molecular (formula) mass and molar mass page 44 . To obtain one mole of copper atoms (6.20 x 1023 ne atoms) weigh out 63.55 g copper. The molar mass (M) of a substance is the mass of one mole of entities (atoms, molecules, or formula units) of the substance.
Ancient
grew to 40 m, but are smaller today.
Answer:
Club mosses
Explanation:
hope this helps
In the electroplating of nickel, 0. 200 faraday of electrical charge is passed through a solution of niso4. What mass of nickel is deposited?.
The mass of nickel, Ni deposited when 0.2 faraday of electrical charge is passed through a solution of NiSO₄ is 5.9 g
Balanced equationNi²⁺ + 2e —> Ni
Molar mass of Ni = 59 g/mol
Mass of Ni from the balanced equation = 1 × 59 = 59 g
Number of faraday = 2
SUMMARY
From the balanced equation above,
2 faraday deposited 59 g of Nickel
How to determine the mass of nickel depositedFrom the balanced equation above,
2 faraday deposited 59 g of Nickel
Therefore,
0.2 faraday will deposit = (0.2 × 59) / 2 = 5.9 g of Nickel
Thus, 5.9 g of Nickel were deposited in the process
Learn more about Faraday's law:
https://brainly.com/question/24795850
Answer:
5.9 grams
Explanation:
You need 2 faraday to deposit 1 mole of Ni (59 grams) because there are 2 moles of electrons in equation:
Ni+2 + 2e- --> Ni(s)
So, 0.2 faraday will deposit 1/10 of that or 5.9 grams of Ni(s).
The distance between a carbon atom and an oxygen atom in the co molecule is how far from the carbon atom is the center of mass of the molecule?
Answer:
1.12x10-10 or 0.63 ewan
Explanation:
Correct option is C)
The distance of centre of mass from carbon atom is,
xcm=m1+m2m1x1+m2x2
=12+1612×0+16×1.1
=0.63A˚
Thus, the centre of mass is 0.63A˚ from carbon atom.
The distance between a carbon atom and an oxygen atom in the co molecule is 0.63
What is the distance?Distance is the measurement of the farness of two objects from each other.
The distance between the molecules can be calculated by the given formula
[tex]xcm = m_1+m_2m_1\times 1+m_2 \times 2[/tex]
Putting the values in the equation
[tex]xcm = 12+1612 \times 0+16 \times 1.1 = 0.63 A^\circ[/tex]
Thus, the distance between a carbon atom and an oxygen atom in the co molecule is 0.63
Learn more about distance
https://brainly.com/question/15172156
#SPJ4
How many molecules are in 12.8 moles of CO2?
A. 563 molecules
B. 0.291 molecules
C. 2.13 x 10^{-23} molecules
D. 7.71 x 10^{24} molecules
Answer: D. 7.71 x 10^24
Explanation:
12.8 moles CO2 (6.02 * 10^23 molecules / 1 mol) = 7.7 * 10^24 molecules :)
What is the minimum quantity of energy that must be possessed by the reactants for a reaction to occur?
Group of answer choices
Collision model
Thermal energy
Catalyst
Activation energy
Answer:
Activation energy :)
Explanation:
The activation energy starts the reaction! Without it, we would not find out the solution!
Have an amazing day!!!
Please rate and mark brainliest!!
An unknown gas with a mass of 205 g occupies a volume of 20.0 L at 273 K and 1.00 atm. What is the molar mass of this compound?
The molar mass of this compound is 0.004 m/g
Firstly, molar mass is moles/grams so we need to solve for the number of moles and we were already given the grams (205 g).
So to solve for moles we were given 205 g, 20.0 L, 273 K and 1.00 atm. Knowing these numbers we can plug them into the ideal gas law, PV=nRT
where P is pressure, V is volume, n is number of moles, R is the gas constant (in this case it is 0.08206) and T is the temperature.
[tex]PV=nRT\\\\n=\frac{PV}{RT}\\\\n=\frac{1.00*20.0}{0.08206*273} =0.893[/tex]
Next, we use moles and grams to solve for molar mass:
[tex]\frac{0.893}{205} =0.004[/tex]
How many potassium ions are needed to bond with a phosphate ion?.
hello people~
Polyethylene terephthalate belongs to which class of synthetic polymer?
A. None of these
B. Polyolefin
C. Nylon
D. Polyester
Answer:
Polyester
Explanation:
Polyethylene terephthalate or shortly known as PET its a clean and strong polyesterIt is used in packagingCompared to the nucleus 5626fe, what is the density of the nucleus 112 48cd?
For a comparison of the nucleus 5626fe, the density of the nucleus 112 48cd is mathematically given as the same.
n(Cd) / n(Fe)=1
What is the density of the nucleus 112 48cd?Generally, the equation for the density is mathematically given as
d=\frac{A}{4/3}\piR^3
Therefore
n(Cd) / n(Fe) = [A (Cd) / (A Fe) ] * [ R (Fe) / R (Cd)]^3
n(Cd) / n(Fe)= (112 / 56 ) * (1/1.26)3
n(Cd) / n(Fe)=1
In conclusion, The ratio of n(Cd) = n(Fe) is 1, hence same
Read more about density
https://brainly.com/question/14010194
Compared to the nucleus ⁵⁶₂₆Fe, the density of the nucleus ¹¹²₄₈Cd is same.
How do we calculate the density of nucleus?Density of any nucleus will be calculated by using the below equation as:
ρ = m/V, where
m = mass of the atom
V = volume = 4/3πR³
For the given question calculation will be proceed as:
n(Cd) / n(Fe) = [m(Cd)/m(Fe)].[R(Fe)/R(Cd)]³
From the given formulas of iron and cadmuim we put values on the above equation then we get,
n(Cd) / n(Fe) = (112 / 56 ) × (1/1.26)3
n(Cd) / n(Fe) = 1
Hence the density of nucleus ¹¹²₄₈Cd is same as of nucleus ⁵⁶₂₆Fe nucleus.
To know more about nucleus density, visit the below link:
https://brainly.com/question/5722114
#SPJ4
A radioactive nucleus emits a beta particle, then the parent and daughter nuclei are
⇢Isotones
⇢Isotopes
⇢Isomers
⇢Isobars
Answer:
isobars
Explanation:
How?
A radioactive nucleus emits beta particle(Like uranium,radium) So the mass numbers are same for daughter nuclei .They have different atomic numbes .So they are isobars
Can someone do this fill in the blanks
Answer: aragon is in group 0
2. It’s a non metal
3. Group number
Explanation:
Which ion combines with ba2 to form a compound that is most soluble in water
Answer:
(2) OH- is the answer.
Explanation:
Hope this helps:)...if not then sorry for wasting your time and may God bless you:)
The ions that combine with Ba2 to form the compound most soluble in water is OH- ion.
What is barium?Barium is a chemical element with atomic number 58.
Barium reacts with the hydroxide ion to form barium hydroxide. It is also called baryta water.
The reaction is [tex]Ba^2^+ aq + 2OH^- \rightarrow Ba(OH)_2 (aq)[/tex]
Thus, the ions that combine with Ba2 to form the compound most soluble in water is OH- ion.
Learn more about barium
https://brainly.com/question/2782682
#SPJ4
At the top of a hill, an athlete on a skateboard has X joules of mechanical energy. How much mechanical energy will she have at the bottom of the hill? Ignore the effects of friction. X joules less than X joules more than X joules There is not enough information to know.
If an athlete has X joules of mechanical energy at the top of the hill, he will have the same X amount of energy at the bottom of the hill.
What is mechanical energy?Mechanical energy is the addition of kinetic and potential energy. It can be either kinetic or potential energy.
It is the energy possessed by the position or the motion of the body.
It is the energy present to perform any work.
So, the athlete will have X joule of energy at the top and bottom of the hill.
Thus, the correct option is a, X joules.
Learn more about mechanical energy
https://brainly.com/question/20030300
Answer:
X Joules
Explanation:
Stirring iced tea mix into water is a chemical change?
Answer:
true
Explanation:
it changes the chemicals in the water and adds new ones
SCIENCE help pls need kna
I answered your question in the photo sent
Good luch