The town council of Finleyville is meeting to discuss emergency evacuation plans. Finleyville is in a state where hurricanes occur. Some town councillors believe the town's emergency evacuation plan needs to be changed because there has been an increase in natural disasters in the area. Other town councilors believe the plan is fine as it is. The following chart was presented to the town council. Which statement best describes the information presented in the chart?

a graph showing the number of hurricanes of category 1 or higher that happened during a specific series of years. Between 1980?1989 there were 13; from 1990?1999 there were 14; from 2000?2009 there were 23; and from 2010?2017 there were 10.

The number of hurricanes has decreased steadily since 1980.
There have been fewer hurricanes because of a change in temperature.
The number of hurricanes was increasing but has decreased in recent years.
There are more tornadoes in Finleyville than there are hurricanes.

Decibel is a relative measure of signal loss or gain and is used to measure the logarithmic loss or gain of a signal.

What is a decibel?

Decibel, also known as dB, is a logarithmic unit that measures the intensity of a sound or the strength of an electrical or electromagnetic signal. A decibel measures the relative amplitude of a sound or signal, rather than its absolute magnitude. Because decibels are logarithmic, they are used to express both large and small differences in amplitude. A difference of 1 decibel corresponds to a power ratio of approximately 1.26 to 1.

Logarithmic measure: A logarithmic scale is a scale that has a constant ratio between successive values. Decibels, for example, are a logarithmic scale. The decibel scale is used to measure the amplitude of sound waves and electrical or electromagnetic signals. Because decibels are logarithmic, they can be used to express a wide range of signal levels, from very weak to very strong.

Relative measure: Relative measure is a measure that compares one value to another. It is used in a variety of fields, including statistics, physics, and engineering. Decibels are a relative measure because they compare one signal to another. They are used to express the relative gain or loss of a signal, rather than its absolute magnitude.

To know more about relative measure of signal: https://brainly.com/question/15048192

#SPJ11

The strike price of the option is $101.5, rounded to the nearest integer, whicch is given as the APE(s,t)= -0.5.

The asset price elasticity (APE) of a European Put Option at time 't' is the ratio of the change in the option price to the change in the stock price, given that all other factors remain constant.

The APE(s,t) of a European put option is calculated using the formula APE(s,t) = -S+Ke-rτ.

In this case, the current stock price is $100 and the time until expiration is 4 years.

We can solve for K, the strike price of the option, given the APE(s,t) is -0.5.

K = S + APE(s,t) + reτ

K = 100 - 0.5 + (0.5 x 4)

K = 101.5

The strike price of the option is $101.5, rounded to the nearest integer.

For more questions related to strike price

https://brainly.com/question/30717436

#SPJ1

Answer:

proofs attached to answer

Step-by-step explanation:

proofs attached to answer

The volume is 63.717 cubic units

The limits of integration for rho are 0 and 4 cos phi, since the sphere has radius 4 cos phi. The limits for phi are π/4 and π/2, since we want to consider the region outside the cone but inside the sphere, and phi is the angle between the positive z-axis and the position vector of a point. Finally, the limits for theta are 0 and 2π, since theta is the azimuthal angle and we want to integrate over the entire azimuthal angle.

Thus, the volume of the region is given by:

V = 8 x ∫(0 to 2π) ∫(π/4 to π/2) ∫(0 to 4 cos phi) ρ² sin phi dρ dphi dtheta

Simplifying the integral using basic calculus, we get:

V = 8 x (64/3 - 16/3√2π) = 63.717

Therefore, the volume of the region outside the cone phi = π/4 and inside the sphere rho = 4 cos phi is 8(64/3 - 16/3√2π), which is an exact answer using π as needed.

To know more about volume here

https://brainly.com/question/11168779

#SPJ4

Answer:

not sure if this sign � was important did it the best way I could

Step-by-step explanation:

To solve this problem graphically, we will first set up a system of inequalities based on the given information:

x ≥ 8 (Fatoumata must work at least 8 hours lifeguarding)

y ≤ 12 - x (Fatoumata can work at most 12 total hours)

15x + 10y ≥ 140 (Fatoumata must earn a minimum of $140)

To graph these inequalities, we can plot the points (8,0), (12,0), and (0,14) on a coordinate plane and draw lines connecting them. The line between (8,0) and (12,0) represents the constraint on the number of hours Fatoumata can work, while the line between (8,0) and (0,14) represents the constraint on the amount of money she must earn. The shaded region that satisfies all three inequalities is the feasible region.

To find one possible solution, we can pick any point within the feasible region. One such point is (8,6), which represents working 8 hours lifeguarding and 6 hours tutoring. This point satisfies all three inequalities:

x ≥ 8 is true since x = 8

y ≤ 12 - x is true since y = 6 ≤ 12 - 8

15x + 10y ≥ 140 is true since 15(8) + 10(6) = 180 ≥ 140

Therefore, one possible solution is for Fatoumata to work 8 hours lifeguarding and 6 hours tutoring to earn at least $140 while not exceeding 12 total hours worked.

Answer:

  y = -1/3x +6

Step-by-step explanation:

You want the equation of the line through the point (3, 5) and perpendicular to y = 3x +2.

The slope-intercept form of the equation of a line is ...

  y = mx +b

where m is the slope, and b is the y-intercept.

Comparing this to the given equation, we see that m=3 for the given line.

The slopes of perpendicular lines are opposite reciprocals of one another. This means the slope of the line we want is ...

  desired slope = -1/m = -1/3

The slope-intercept equation above can be solved for b to give ...

  b = y -mx

Then the y-intercept for the line we want is ...

  b = 5 -(-1/3)(3) = 5 +1 = 6

The equation of the desired line is y = -1/3x +6.

__

Additional comment

Once you understand how to find the slope of the given line and of the desired line, you can write down the desired equation in point-slope form.

Given slope = 3; perpendicular slope = -1/3

Point-slope equation: y -k = m(x -h) . . . . line through (h, k) with slope m

  y -5 = -1/3(x -3) . . . . . line through (3, 5) with slope -1/3

The only "work" required is to rearrange this equation to whatever form you may want. In standard form it is x +3y = 18.

Answer:x=33/4096=0.008

Step-by-step explanation: 1.1     16 = 24

(16)3 = (24)3 = 212

Equation at the end of step

1

:

 ((212 • x) -  1) -  32  = 0

STEP

2

:

Equation at the end of step 2

 4096x - 33  = 0

STEP

3

:

Solving a Single Variable Equation:

3.1      Solve  :    4096x-33 = 0

Add  33  to both sides of the equation :

                     4096x = 33

Divide both sides of the equation by 4096:

                    x = 33/4096 = 0.008

The value of the standard error of the mean in each of the following cases:

a. The population size is infinite = 1.4142

b. The population size is N = 50,000 = 1.4135

c. The population size is N = 5000 = 1.4073

d. The population size is N = 500 = 1.343

The standard error is a statistical technique used to measure variability. SE is the abbreviation. A statistic's or parameter estimate's standard error is the standard deviation of its sample distribution. It can be defined as an approximation of that standard deviation.

Standard error calculation:

σ = 10

n = 50

A) when size is infinite, the standard deviation of the sample mean is given by the formula;

σ_x' = σ/√n

Thus,

σ_x' = 10/√50

σ_x' = 1.4142

B) size is given, thus, the standard deviation of the sample mean is given by the formula;

σ_x' = (σ/√n)√((N - n)/(N - 1))

Thus, with size of N = 50,000, we have;

σ_x' = 1.4142 x √((50000 - 50)/(50000 - 1))

σ_x' = 1.4142 x 0.9995

σ_x' = 1.4135

C) at N = 5000;

σ_x' = 1.4142 x √((5000 - 50)/(5000 - 1))

σ_x' = 1.4073

D) at N = 500;

σ_x' = 1.4142 x √((500 - 50)/(500 - 1))

σ_x' = 1.343

Learn more about standard error:

https://brainly.com/question/15858647

#SPJ4

Answer:2.4 inches

Step-by-step explanation:

if 6 is for 30 feet, we can use a proportional statement to find what the length of the line will be for a room that is 12 feet.

Answer:28/445 or 6.2921 %

Step-by-step explanation:

There are 90 nuts all together. There are 14 pecans so it would be a 14/90 chance. Then since you are not replacing the nut there are 89 nuts. There are 36 cashews which would be a 36/89 chance. Because in the problem it says to find the probability of the selecting a pecan and then a cashew we know it is an and situation. Since it is an and situation you would multiply. You would do 14/90 times 36/89. This gives you 504/8010 which reduced is 28/445 or 6.2921%. Do you have and questions?

To see if there is a significant difference in the costs of airline flights between the west and east coasts to Lincoln, Nebraska, one can use a two-sample t-test. It is okay to perform the inference procedure, but the following assumptions and conditions must be checked.

Assumptions: Independence: The airfares for each coast should be independent of each other. Normality: The populations of airfares for both coasts should be approximately normally distributed .Equal variances: The population variances for both coasts should be equal.

Conditions: Sample sizes: Both samples should be large enough so that the Central Limit Theorem applies. Rule of thumb for t-tests is that the sample size should be at least 30.Random sampling: Both samples should be random .To test if the conditions are met, one can create a boxplot for each coast, check the normal probability plots, perform the F-test to check for equal variances, and check the sample sizes. If the assumptions and conditions are met, a two-sample t-test can be used to determine if there is a significant difference in the costs of airline flights between the west and east coasts to Lincoln, Nebraska.

for such more questions on Central Limit Theorem

https://brainly.com/question/13652429

#SPJ11

Yes, the data give convincing evidence to support Phoebe's hunch. As the result of the test is a p-value that is 0.1 of less than 0.05.

The p-value is the probability of obtaining a result as extreme or more extreme given that the null hypothesis is true. The p-value is calculated by comparing the test statistic to the probability distribution under the null hypothesis.

The ratio of seniors bringing a bag lunch= 78/104 or 0.75,

while the ratio of sophomores bringing a bag lunch= 52/80 or 0.65.

This indicates that the proportion of seniors bringing a bag lunch is higher than the proportion of sophomores bringing a bag lunch.

Further, the difference between the proportions is

0.75-0.65 = 0.1,

which is a large enough difference to be considered significant.

The result of the test is a p-value of less than 0.05, which is statistically significant and indicates that the difference in the proportions is due to the different ages, and not due to chance.

For more questions related to probability

https://brainly.com/question/25870256

#SPJ1

$17.5 price should she charge in order to make the highest possible gross income.

Given two points are (400, 10) and  (392, 10.5)

slope = (10.5-10)/(392 -400) = 0.5/ - 8 = -0.0625

Equation is

p -10 = -0.0625(x-400)

p-10 = -0.0625x + 25

p = -0.0625x + 35

find revenue as

R=x*p

-0.0625x² + 35x

To maximize,

R'(x) =0

-0.125x + 35 = 0

35/0.125  = x

280 = x

when x is equal to 280, find

p= -0.0625(280) + 35

p= -17.5 +35

p= 17.5

Learn more about the Price here: brainly.com/question/19091385

#SPJ4

Stefanie bought a package of pencils for 1. 75$ and some erasers that cost 0. 25 each. She paid a total of 4. 25 for these items, before tax. Stefanie bought total 10 erasers.

Equation:

In mathematics, an equation is a formula that connects two expressions with the equal sign = to indicate that they are equal.

According to the Question:

The number of erasers bought by Stefanie:

Let we denote the number of erasers bought by her by x (an unknown variable)

Then we will have:

Total amount before tax = cost of one package of pencil + cost of  erasers

   $4.25 = $1.75 + X × $0.25

⇒ 4.25 = 1.75 + 0.25x

Now,

we will perform subtraction by 1.75 and division by 0.25 on both sides.

4.25 = 1.75 + 0.25x

Subtracting 1.75 both side:

   4.25 -1.75 = 0.25x

⇒ 2.5 = 0.25x

Dividing by 0.25 on both sides:

   2.5/0.25 = 0.25x/0.25

⇒ x = 10

Thus, Stefanie bought total 10 erasers.

Learn more about Total:

https://brainly.com/question/29615374

#SPJ4

To solve the question asked, you can say:  So the dolphin's new location expressions is 3 feet above sea level. Option OD explains this process correctly and gives the correct answer. 

In mathematics, an expression is a set of numbers, variables, and mathematical operations such as addition, subtraction, multiplication, division, and exponentiation that represent quantities or values. Expressions can be as simple as "3 + 4" or as complex as they can contain functions like "sin(x)" or "log(y)" . Expressions can be evaluated by substituting values ​​for variables and performing mathematical operations in the order specified. For example, if x = 2, the expression "3x + 5" is 3(2) + 5 = 11. In mathematics, formulas are often used to describe real-world situations, create equations, and simplify complex math problems. 

Move 3 units to the right on the outer diameter number line. Exit with -3. The dolphin was 3 feet below sea level.

To find the dolphin's new location, we need to determine the dolphin's direction of movement and distance traveled. In this case the dolphin swam to the bottom. This means it has moved in the negative direction on the number line. Then she swam three feet. This means she has moved 3 units to the right (or positive side) on the number line.

So we need to start at the dolphin's original position of -6 and move it 3 units to the right to -3. So the dolphin's new location is 3 feet above sea level. Option OD explains this process correctly and gives the correct answer. 

To know more about expressions visit :-

https://brainly.com/question/14083225

#SPJ1

We will consider two cases: n is even and n is odd. In this step, you will complete the proof of the first case. Proof. Case 1: n is even Let n be an even integer. By the definition of even, for some integer k. This follows that `nº + 17n - 1 = 2:( 2k )+1`

Since is an integer, `n^3+17n + 1` must be an integer. Since `na +17n – 1` equals times an integer plus `n+ 17n – 1` is 2The solution explains the concept of even integer. Let n be an even integer, and by the definition of even, for some integer k. This follows that `nº + 17n - 1 = 2:( 2k )+1`.Since 2k is an integer, n^3 + 17n + 1 must also be an integer. This is because even times even is even and even times odd is even, which means that (2k + 1) is always odd. The integer n^3 can be written as (n*n*n). Given that n is an even integer, it follows that n*n is even. And since an even number times an even number is always even, it follows that (n*n*n) is even. Since the sum of an even number and an odd number is always odd, adding 1 to n^3 + 17n gives an odd number, and thus an integer, as desired. The equality `na +17n – 1 = 2` is not needed in this proof.

We will consider two cases: n is even and n is odd : https://brainly.com/question/31138563

The probability that the 3rd card is a heart if the first card was a heart and the second card was a club is approximately 0.0152. It is the product of the probabilities.

The probability that the 3rd card is a heart if the first card was a heart and the second card was a club when three cards are drawn without replacement from an ordinary deck of 52 playing cards.

There are 13 hearts in a deck of 52 cards.

Therefore, P(1st card is a heart) = 13/52 = 1/4

There are 13 clubs in a deck of 52 cards. Since one heart is already drawn in the first card, there are only 51 cards left in the deck.

Therefore, P(2nd card is a club) = 13/51

There are only 12 hearts remaining in the deck since one heart is already drawn in the first card. There are only 50 cards left in the deck since two cards are already drawn.

Therefore, P(3rd card is a heart) = 12/50 = 6/25

The probability that the 3rd card is a heart if the first card was a heart and the second card was a club is:

P(3rd card is a heart | 1st card is a heart and 2nd card is a club) = P(1st card is a heart) × P(2nd card is a club) × P(3rd card is a heart) = (1/4) × (13/51) × (6/25) = 39/5,775 = 0.0152 (rounded to 5 decimal places)

Therefore, the probability that the 3rd card is a heart if the first card was a heart and the second card was a club is approximately 0.0152.

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

Calculating the expected value of payout using the probabilities given, we can bet on blue for all 10 races, bet on red for all 10 races and bet on purple for all 10 races

To determine the most efficient bets to increase your money during the 10 rounds, we need to consider the probability and potential payout for each racecar. We can start by calculating the expected value of each racecar's payout:

Blue: 0.3 x 2 = 0.6

Red: 0.25 x 2.5 = 0.625

Purple: 0.18 x 3 = 0.54

Yellow: 0.1 x 5 = 0.5

Black: 0.08 x 7 = 0.56

Green: 0.05 x 10 = 0.5

Orange: 0.03 x 15 = 0.45

Pink: 0.01 x 50 = 0.5

Based on the expected value of payout, the most efficient bets would be on the racecars with the highest expected value. However, we also need to consider the probability of each racecar winning or placing in the top 3.

To maximize our chances of winning, we should bet on the racecars with the highest probability of winning or placing in the top 3, even if their expected payout is not the highest.

Assuming that if one racecar is likely to win but doesn't win, they are statistically most likely to come second, and so on, we can rank the racecars in terms of their probability of winning or placing in the top 3:

1. Blue - 30% chance of winning

2. Red - 25% chance of winning

3. Purple - 18% chance of winning

4. Black - 8% chance of winning

5. Yellow - 10% chance of winning

6. Green - 5% chance of winning

7. Orange - 3% chance of winning

8. Pink - 1% chance of winning

Based on this ranking, the most efficient bets would be as follows:

1. Bet on Blue for all 10 races. The expected payout is not the highest, but the probability of winning is the highest at 30%.

2. Bet on Red for all 10 races. The probability of winning is the second-highest at 25%.

3. Bet on Purple for all 10 races. The probability of winning is the third-highest at 18%.

Betting on these three racecars will give you the highest chance of winning or placing in the top 3, and therefore, the most efficient bets to increase your money. However, keep in mind that gambling always carries risks, and there is no guarantee of winning.

Learn more on probability here;

https://brainly.com/question/24756209

#SPJ1

In the following question, among the conditions given, It can be given by Ymax = H(N*)So the maximum sustainable yield for a population governed by a Gompertz model and subjected to harvesting (either constant yield or constant effort) can be calculated using the above formula.

To find the maximum sustainable yield for a population governed by a Gompertz model and subjected to harvesting (either constant yield or constant effort) we will start with the formula of the Gompertz model that is, IN = r Nlog(K)Solution: Given that the population is governed by a Gompertz model = r Nlog(K)We know that the harvesting term that is responsible for the overexploitation of the resources, hence we can write the Gompertz model as dN/dt = rN[1 - N/K] - H(x)WhereH(x) can be a constant yield or constant effort in the harvesting term.

To find the maximum sustainable yield, we will use the concept of steady-state or equilibrium population level. Steady-state condition:dN/dt = 0Solving this equation gives us the steady-state population level, say N*.Now we need to calculate the maximum amount of resources that can be harvested sustainably. This maximum amount of resources harvested sustainably is called the maximum sustainable yield (MSY). It can be given by Ymax = H(N*)So the maximum sustainable yield for a population governed by a Gompertz model and subjected to harvesting (either constant yield or constant effort) can be calculated using the above formula.

For more such questions on Gompertz model

https://brainly.com/question/13720402

#SPJ11

The final value in cell D2 using the following formula:

price - price× discount = $ 101.19

Take the original price. Multiply that by the discount percentage and divide the result by 100. Subtract the result from the original price. this is your final price

According to the Question:

The final value in cell D2 using the following formula:

(price - price) × discount.

Given that:

Price = $114.99

Discount = 12%

By the above formula:

(price - price) × discount.

= ($114.99 - $114.99) × 12%

= $101.19

Learn more about discount:

https://brainly.com/question/3541148

#SPJ4

Therefore, the transfer function of the system is:

G(s) = Y(s) / U(s) = U(s) / (s^3 + 0.25s + 1.25)

In summary, the differential equation depicting the dynamics of a fourth Single-Input-Single-Output (SISO) system is y'''(t) + 0.25y'(t) + 1.25y(t) = u^2(t), and the transfer function of the system is G(s) = U(s) / (s^3 + 0.25s + 1.25).

The differential equation describing the dynamics of a single-input-single-output (SISO) system is given by ddy(t) + ay'(t) + by(t) = cdu(t), where y(t) is the output of the system, u(t) is the input of the system, and d, a, b, and c are constant coefficients representing the system dynamics.

For the given differential equation, which is the dynamics of four Single-Input-Single-Output (SISO) systems, we have:

[tex]y(t) + ay'(t) + by''(t) + cy'''(t) = u(t)[/tex]
Here, we have the third-order differential equatior : [tex]y'''(t) + 0.25y'(t) + 1.25y(t) = u^2(t)[/tex]

The given equation is a third-order, linear, time-invariant (LTI) differential equation. In control theory, a differential equation that relates the input u(t) to the output y(t) of a system is known as the transfer function.

The transfer function of the given system can be found by applying the Laplace transform to the differential equation:

s^3Y(s) + 0.25sY(s) + 1.25Y(s) = U^2(s)

where Y(s) and U(s) are the Laplace transforms of y(t) and u(t), respectively.

Solving for Y(s), we get:

Y(s) = U^2(s) / (s^3 + 0.25s + 1.25)

for such more questions on Laplace transform

https://brainly.com/question/2272409

#SPJ11

Answer:

Para calcular el precio original de los auriculares antes del descuento, podemos usar la fórmula:

Precio original = Precio después del descuento / (1 - Porcentaje de descuento)

Donde "Precio después del descuento" es el costo de los auriculares después del descuento, y "Porcentaje de descuento" es el porcentaje aplicado como descuento. En este caso, el porcentaje de descuento es del 20%, es decir, 0.2 en términos decimales.

Sustituyendo los valores conocidos, obtenemos:

Precio original = 260 / (1 - 0.2)

Precio original = 260 / 0.8

Precio original = 325

Por lo tanto, el costo original de los auriculares antes del descuento era de $325.:

Answer:

The answer is D. (1-0.2)h=260

Step-by-step explanation:

Random sampling 50 batteries throughout the day and testing to see if they would provide most valid results.

A sample is described as a smaller, more manageable representation of a larger group. A smaller population with characteristics of a larger one. A sample is used in statistical analysis when the population size is too large to include all participants or observations in the test.

The sample may be biased if it is taken from the first 25 batteries made each day or the last 25 batteries made each day.

The first and last battery made each day could not be an accurate representation of the total quality of the batteries produced that day if the battery manufacturing process is not consistent thought the day.

Although the battery quality can change during the day, sampling the first 50 batteries produced each day may also add bias into the sample.

The ideal course of action is to randomly select 50 batteries throughout the day, since this helps to ensure that the sample is reflective of the general calibre of batteries manufactured that day.

A more accurate image of the quality of the batteries manufactured can be obtained using this method, which is also more likely to capture any variations in battery quality over the day.

To know more about Random sampling go through:-

https://brainly.com/question/13219833

#SPJ4

The function f(x) = x⁴ - 2x³ + 5 is concave downwards on the interval (0,1) and concave upwards everywhere else.

To determine the concavity of the function f(x) = x⁴ - 2x³ + 5, we need to find its second derivative f''(x).

f(x) = x⁴ - 2x³ + 5

f'(x) = 4x³ - 6x²

f''(x) = 12x² - 12x

The concavity of the function is determined by the sign of its second derivative.

If f''(x) > 0 for all x, the function is concave upwards.

If f''(x) < 0 for all x, the function is concave downwards.

Let's solve for f''(x) = 12x² - 12x:

12x² - 12x = 0

12x(x - 1) = 0

x = 0 or x = 1

When x < 0, f''(x) > 0, so the function is concave upwards.

When 0 < x < 1, f''(x) < 0, so the function is concave downwards.

When x > 1, f''(x) > 0, so the function is concave upwards.

Learn more about concavity of function here: https://brainly.com/question/23847661

#SPJ1

To work out the percentage reduction, we need to find the difference between the original price and the reduced price, and express that difference as a percentage of the original price:

Original price = £12500

Reduced price = £11625

Difference = £12500 - £11625 = £875

Percentage reduction = (Difference / Original price) x 100%

= (£875 / £12500) x 100%

= 7%

Therefore, the percentage reduction in the price of the car is 7%.

Answer:

Step-by-step explanation:

Discount [tex]= \pounds12,500 -\pounds11625= \pounds875[/tex]

Percentage reduction [tex]=\frac{875}{12500} \times 100 = 7[/tex]

The price of a new car was reduced by 7%.

the given side that measures 2 1/4 inches with the corresponding length measurement. Label the angle between these sides as 60°.

A triangle is a polygon with three sides, three vertices, and three angles. The sum of the interior angles of a triangle is always 180 degrees, and the longest side of a triangle is opposite to the largest angle, and the shortest side is opposite to the smallest angle. Triangles can be classified according to their side lengths and angles. For example, an equilateral triangle has three equal sides and three equal angles of 60 degrees each, while an isosceles triangle has two equal sides and two equal angles. A scalene triangle has no equal sides or angles. Triangles are important in geometry and have many applications in mathematics and other fields, such as architecture, engineering, physics, and computer graphics.

by the question.

Draw a straight-line segment and label it as the given side that measures 1 1/2 inches.

From one endpoint of the first line segment, draw another line segment that forms a 60° angle with the first line segment. Label this second line segment as the given side that measures 2 1/4 inches.

Draw a third line segment that connects the endpoints of the first two-line segments. This will complete the triangle.

To label the triangle, label the given side that measures 1 1/2 inches with the corresponding length measurement, and label the given side that measures 2 1/4 inches with the corresponding length measurement. Label the angle between these sides as 60°.

To learn more about triangle:

https://brainly.com/question/2773823

#SPJ1

The magnitude of the vector is approximately 7.3 and the direction of the vector is approximately 74 degrees which is option B.

We have,

To find the magnitude and direction of the vector <2, 7>, we can use trigonometric concepts. Let's break down the steps:

Magnitude (Length) of the Vector:

The magnitude of a vector <x, y> is given by the formula:

Magnitude = √(x² + y²)

For the given vector <2, 7>:

Magnitude = √(2² + 7²) = √(4 + 49) = √53 ≈ 7.3 (rounded to the nearest tenth)

Direction (Angle) of the Vector:

The angle θ that the vector makes with the positive x-axis can be found using trigonometric functions:

θ = arctan(y / x)

For the given vector <2, 7>:

θ = arctan(7 / 2) ≈ 74° (rounded to the nearest degree)

Thus,

The magnitude of the vector is approximately 7.3 and the direction of the vector is approximately 74 degrees which is option B.

Learn more about vectors here:

https://brainly.com/question/24256726

#SPJ12

The given statements are True , False, False, True and True.

They are elaborated in points below:

(a) True:

Let x and y be even integers.

Then, by definition, x = 2a and y = 2b for some integers a and b.

Adding these equations, we get x + y = 2a + 2b = 2(a + b), which is an even integer. Therefore, the statement is true.

(b) False:

A counterexample is x = 1 and y = 3. Then x + y = 4, which is even, but neither x nor y is even.

Therefore, the statement is false.

(c) False:

A counterexample is x = -2 and y = 4. Then x² = (-2)²= 4 and y = 4² = 16, but x ≠ y. Therefore, the statement is false.

(d) True:

Since x < y, we have y - x > 0. Multiplying both sides by y + x, we get y² - x² > 0.

Rearranging the terms, we have x² < y².

Since x and y are both non-negative, we can take the square root of both sides to get x < y.

Therefore, the statement is true.

(e) True:

Since x and y are positive, we can take the square root of both sides of the inequality x < y to get √x < √y.

Then, multiplying both sides by √x + √y, we get x + 2√xy + y > x + y.

Since x + y is positive, we can divide both sides by x + y to get 1 + 2√(xy)/(x+y) > 1.

Rearranging the terms, we get √(xy) < (x + y)/2. Squaring both sides, we get xy < (x + y)²/4.

Simplifying, we get x²/4 - xy + y²/4 > 0. Rearranging the terms, we get (x - y/2)² > 0, which is always true since the square of any non-zero number is positive. Therefore, the statement is true.

To learn more about integers:

https://brainly.com/question/929808

#SPJ11