The velocity of an object is it’s speed and __ of motion .

Answers

Answer 1

Answer:

direction should be the answer

Answer 2
velocity i’m pretty sure

Related Questions

The slope of a distance vs. time graph is a measurement called
A. displacement
B. speed
C. correlation
D. velocity

Answers

Answer:

B. speed

Explanation:

im not sure hahahaha

A cat sits on a high brance. what kind of energy does it possess? (APEX)
A. Kinetic
B. Chemical
C. Potential
D. Nuclear ​

Answers

Answer:

C. Potential Energy ...............

Between 1990 and 2010, more than 8.6 million acres of forest were destroyed in Indonesia, Malaysia, and Papua New Guinea to build palm oil plantations. These forests are homes to orangutans, elephants, tigers, and other animals. How will this activity affect the forest ecosystem?

Answers

Answer:

1.More number of natural disasters will occur.

2. Disease will spread.

Explanation:

An ecosystem is a geographic area where plants, animals, and other organisms live in and interact with each other in an environment.

Forests are homes to orangutans, elephants, tigers, and other animals.

As more than 8.6 million acres of forest were destroyed in Indonesia, Malaysia, and Papua New Guinea to build palm oil plantations, this may lead to the following consequences:

1.More number of natural disasters will occur.

2. Disease will spread.

What is the most effective way to breathe during strength training?

Answers

You might be tempted to hold your breath while you're lifting weights. Don't hold your breath. Instead, breathe out as you lift the weight and breathe in as you lower the weight.

A box is being pushed across the floor at a constant velocity with an
applied force of 30N, what is the magnitude of the frictional force acting
on this box?

Answers

Answer:

Magnitude of frictional force = 30 N

Explanation:

According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:

Fn=m.a

The net force is the vector addition of each individual force. If the sum of all the forces acting on an object is zero, then the acceleration is zero. That means the object moves at a constant speed or is at rest.

When an object is pushed across a horizontal rough surface, there are two forces acting in the direction of the motion: The applied force and the frictional force.

If the applied force is greater than the frictional force, then the object moves at a constant positive acceleration. If the frictional force is greater than the applied force, then the object won't move at all (if it was at rest) or will start a deaccelerated motion (braking).

Finally, if both forces are equal, the object will move at a constant speed or remains at rest. Since the box is moving at a constant speed, we can conclude the frictional force equals the applied force:

Magnitude of frictional force = 30 N

What do zooplankton and krill have in common?

Answers

Hello, thank you for choosing brainly today. My name is Ethan and I'll be solving your question. "What do zooplankton and krill have in common?"

Krill and plankton are two groups of organisms found in the ocean. Krill are species of crustacean related to shrimp, and serve as a very important link in the food chain of the sea. Plankton consist of a larger group of organisms with much more variety, including bacteria, algae, protozoans, jellyfish and some species of cephalopods.

Propulsion

The primary factor that determines whether a species is plankton or not is propulsion. Plankton organisms lack the ability to swim against the tide, and instead float from place to place on sea currents. They may be capable of some movement, and some types of plankton can even hunt for food, but none is powerful enough to make its own headway through the ocean. Adult krill are capable of swimming against currents, but their larvae and eggs fall into the plankton category.

Variation

Krill are crustaceans of the Euphausiacea order, which consists of 86 different species. Plankton, on the other hand, can come from a wide variety of different species and orders. Plankton fall into three broad categories, depending on their primary function. Phytoplankton are plant-like organisms, capable of photosynthesis. Zooplankton are animal plankton species that get their nutrients by eating other microscopic organisms. Bacterioplankton are the smallest plankton, and often serve as food for zooplankton and other lifeforms.

Appearance

Krill species have similar characteristics and generally resemble tiny shrimp. Most species reach around 2 centimeters (0.8 inches) as adults, while the largest species can reach sizes of up to 15 centimeters (5.9 inches). Plankton, on the other hand, consists of organisms of many different shapes and sizes. The smallest categories include microscopic viruses, protozoans, small crustaceans, and other tiny organisms. At the larger end of the scale, megaplankton are any plankton over 2 centimeters (0.8 inches) in size, and include large animals, such as cephalopods and jellyfish. The largest plankton is the lion's mane jellyfish, which can reach 2.5 meters (8.2 feet) in diameter and grow tentacles more than 36.5 meters (120 feet) long.

Role

Plankton and krill serve similar, but slightly different, roles in the food chain. Phytoplankton synthesize nutrients, while bacterioplankton recycle nutrients from decomposing matter in the ocean, providing some of the fundamental sources of nutrition for all ocean creatures. Zooplankton serve to concentrate those nutrients by eating smaller plankton and serving as food for larger creatures. Krill are one step up in the food chain, eating plankton and serving as a nutrient bridge from microscopic life forms to larger fish and mammals.

Whether or not charges will move in a material depends partly on how tightly ______ are held in the atoms of the material.

Answers

Answer:

ELECTRONS

Explanation:

Please help, will give brainliest:
The spacecraft OSIRIS-REx is currently orbiting Bennu at an average distance from its center of mass of 1000 meters. At this distance, it takes 24 hours and 57 minutes to complete one orbit. What is its average orbital velocity?

Answers

Answer:

v = 0.0251 km/h

Explanation:

Given that,

The average distance from its center of mass of 1000 meters.

The time taken is  24 hours and 57 minutes to complete one orbit

We need to find the orbital velocity of the spacecraft OSIRIS-REx.Let it is v. SO,

[tex]v=\dfrac{2\pi r}{t}[/tex]

Putting all the values,

[tex]v=\dfrac{2\pi \times 100}{24\ hours\ and\ 57\ minutes}\\\\v=\dfrac{2\pi \times 100}{(86400+3420)}\\\\v=0.00699\ m/s[/tex]

or

v = 0.0251 km/h

So, the average orbital velocity is 0.0251 km/h.

What forces are included on a free-body diagram for a chosen object?

a.all the forces exerted on or by the object.

b.all the forces exerted by the object, but not on it

c. all the forces exerted on the object, but not by it

d. all forces that exist within the neighborhood of the object​

Answers

Answer:

C

Explanation:

A free-body diagram shows all the forces exerted or applied on an object.

A free-body diagram includes all the forces exerted on or by the object. Hence, option A is correct.

What is a free-body diagram?

A free-body diagram is a diagrammatic representation of a single body or a group of bodies that are separated from their surroundings and display all the forces acting on them. A free-body diagram (FBD; sometimes known as a force diagram) is a graphical representation used in physics and engineering to show the applied forces, moments, and consequent reactions on a body under a specific condition.

It shows a body or group of connected bodies along with all the applied forces, times, and reactions that the body experiences. The body could be compact or comprise several interior pieces (like a truss) (such as a beam). To answer difficult problems, a series of free bodies and other diagrams may be required.

Hence, all the forces exerted on or by the object are included in the free-body diagram.

To get more information about Free Body Diagram :

https://brainly.com/question/15171601

#SPJ2

What kind of bond is formed between a metal and a metal
O All of the above
O lonic bond
O Metallic bond
O Covalent bond

Answers

Answer:

metallic bond

Explanation:

Answer is Metallic bond

What will most likely occur if sulfur forms an ionic bond with another element?
A. Sulfur will accept electrons.
B. Sulfur will donate electrons
C. Sulfur will become a positive ion.
D. Sulfur will become less stable.

Answers

the answer is A:)
it’s “A” because it will most likely occur if sulfur forms an ionic bond with the elements
The right answer is “A”

HELLO! Please Help me.
I can't do it! it's Science ​

Answers

Answer:

9V

Explanation:

V=IR

V=2.5*3.6

V=9

Answer:

9V

Explanation:

V =IR

V =2.5 * 3.6

V = 9V

As light from a star spreads out and weakens, do gaps form between the photons?

Answers

there are no gaps in space. the light from the star weekend as it travels, but it just reduces the strength and doesn’t produce gaps.

I will give you more points!!! :)

But first, answer the question below!!!

Answers

The equation for work is W=(F)(D)
Given:
F= 60N
D= 20m
Therefore, the correct equation with substitution is W=(60N)(20m)

Mr. Mehta cut several 275-centimeter lengths of wallpaper to put in his
dining room. How many meters long was each piece of wallpaper?

Answers

Answer:

2.75 meters.

Explanation:

1 meter = 100 centimeters.

There are 275 centimeters.

275/100=2.75

So, each piece of wallpaper was 2.75 meters long.

Answer:

Think

Explanation:

You are building a bridge, and you want to use a metal with the strongest metallic bonds. Which hypothetical element would you use? Metal A - melting point of 236 degrees Celsius Metal B - melting point of 2,678 degrees Celsius Metal C - melting point of 1,362 degrees Celsius Metal D - melting point of 800 degrees Celsius

Answers

Answer:

Metal B

Explanation:

Metallic bonds melt at high temperatures. Metal B has the highest melting point of the 4 metals given.

What is the acceleration of gravity if you are on planet earth? *

Answers

Answer:

9.8 m/s2

Mark me up brainliest

follow me

Answer:

B) 9.8 m/s2

please give me brainliest!

God bless :p

can energy change in physical change

Answers

“Physical changes involve small changes in energy and are easily reversible. A chemical change may involve a decomposition or synthesis reaction. During chemical change, the mass and number of atoms is conserved, but the number of molecules is not always the same. Chemical reactions involve larger changes in energy.” (open stacks) hope this helps!

why can't you run from momentum ?

Answers

Two kids walk through the woods discussing momentum. I mean, who wouldn’t?
Okay, fine. It’s a basic introduction to the concept of momentum.

Red blood cells need iron. They store iron and typically contain more iron than the fluid around them does. Which action would show the blood cells doing active transport?

A.pushing iron out
B.bringing iron in
C.swelling
D.shrinking

Answers

B


This is because the particles are going against the concentration gradient. From an area of low concentration to a higher concentration using energy.

Hope this helps!
B . bringing iron in

calculate your power in watts if you do 500 N*m of work picking up a dumbbell,and takes 5 s to perform that task?​

Answers

Answer:

100watts

Explanation:

Given parameters:

Workdone  = 500Nm

Time taken = 5s

Unknown:

Power in watts = ?

Solution:

Power is the rate at which work is done;

   Power  =[tex]\frac{workdone }{time}[/tex]

Input the parameters and solve;

   Power = [tex]\frac{500}{5}[/tex]  = 100watts

Can someone please Help me

Answers

Answer: The answer to 3 to is less inertia. The answer to 4 is large amount of inertia. The answer to 5 is large amount of inertia. The answer to 6 is more fuel. Number 6 is kind of unkown considering I can’t see the other answer but I guess it’s more fuel.

Explanation: Inertia is the resistance of the object to any change in its motion, including a change in direction. An object will stay still or keep moving at the same speed and in a straight line, unless it is acted upon by an external unbalanced force. So when there is more inertia, it’s harder to control, but when it has less inertia, it’s more loose and easier to move around.

When a closed can is heated, the pressure inside it increases. This happens because

Answers

Answer:

the heat is growing the particles bigger

Explanation:

How can Newton's third law describe the forces affecting a rocket as it
descends to Earth's surface?
A. The rocket can move downward because the forces acting on it
are unbalanced.
B. The maximum amount of force the rocket engines can provide
determines how much mass the rocket can lift.
C. The rocket pushes through the air with a force equal to that of
Earth's gravity pulling on the rocket.
D. The force the rocket exerts on the air is in the direction opposite to
the force that the air exerts on the rocket.

Answers

Answer:

its D

Explanation:

i took the quiz

The force the rocket exerts on the air is in the direction opposite to

the force that the air exerts on the rocket.

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Every action has an equal and opposite response, according to Newton's Third Law. Burning fuel in a rocket causes a push that propels the rocket forward from the front. As a result, the exhaust gas is pushed in the opposite direction and equally.

The force the rocket exerts on the air is in the direction opposite to

the force that the air exerts on the rocket.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Activity 3. Let's Do The Mathi
Direction: Use Newton's second law equation to solve for force, mass, and acceleration
Problem 1- A ball with a mass of 0.5 kg is hit with a force of 2.5N. What is its acceleration?
Problem 2- What is the acceleration of a 15kg box that is pushed across a horizontal surface
with a force of 50N?
Problem 3- An object with a mass of 2.0 kg has a force of 5.0 N applied to it. What is the
resulting acceleration of the object?
Problem 4- An object with a mass of 3.0 kg accelerates 2.5 m/s2 when an unknown force is
applied to it. What is the amount of the force?
Problem 5- An object accelerates 12.0 m/s2 when a force of 6.0 N is applied to it. What is the
mass of the object?

Answers

Answer:

Problem 1-

The acceleration = 5 m/s²

Problem 2 -

The acceleration = 3.[tex]\overline 3[/tex] m/s²

Problem 3 -

The acceleration = 2.5 m/s²

Problem 4-

The force applied = 7.5 N

Problem 5-

The mass of the object,  = 0.5 kg.

Explanation:

Problem 1-

The mass of the ball, m = 0.5 kg

The force (applied) with which it was hit, F = 2.5 N

The acceleration, a = Force/Mass = 2.5 N/(0.5 kg) = 5 m/s²

The acceleration = 5 m/s²

Problem 2 -

The mass of the box, m = 15 kg

The force (applied) with which it was hit, F = 50 N

The acceleration, a = Force/Mass = 50 N/(15 kg) = 10/3 = 3.[tex]\overline 3[/tex] m/s²

The acceleration = 3.[tex]\overline 3[/tex] m/s²

Problem 3 -

The mass of the object, m = 2.0 kg

The force (applied) with which it was hit, F = 5.0 N

The acceleration, a = Force/Mass = 5.0 N/(2.0 kg) = 2.5 m/s²

The acceleration = 2.5 m/s²

Problem 4-

The mass of the object, m = 3.0 kg

The acceleration, a, of the object = 2.5 m/s²

The force applied to it, F = Mass × Acceleration = 3.0 kg × 2.5 m/s² = 7.5 N

The force applied = 7.5 N

Problem 5-

The acceleration, a, of the object = 12 m/s²

The force applied, F = 6.0 N

The mass of the object, m = Force/Acceleration = 6.0 N/(12 m/s²) = 0.5 kg

The mass of the object,  = 0.5 kg.

are eggs a element, a compound, or a mixture

Answers

Answer:

I'm gonna go with compund

Answer: a mixture because it is made out of some other substances.

Explanation:

A runner completes two laps around a 400-m track. She runs the first lap in 1 min 32 s, and the second lap in 1 min 49 s. What is her average speed?

Answers

Answer:

The average speed is 3.98 [tex]\frac{m}{s}[/tex]

Explanation:

Speed ​​is a scalar quantity that shows the relationship between the distance traveled and the time taken.

In other words, speed is a scalar quantity that determines the ratio of the distance traveled by a body or object and the time it takes to cover that distance. Speed ​​does not take direction into account.

Average speed refers to the total distance traveled during a given time, which is equivalent to saying that it is the ratio of distance and time.

[tex]average speed=\frac{total distance}{totaltime}[/tex]

In this case you know that a runner completes two laps around a 400 m track, so the total distance traveled is 800 m.

On the other hand, you know that the runner completes the first lap in 1 min 32 s, and the second lap in 1 min 49 s. Being 1 min equivalent to 60 s, the first round is completed in 92 s and the second round in 109 s. So the total time to complete the two laps around the track is 92 s + 109 s = 201 s.

That is, being:

total distance=800 mtotal time= 201 s

and replacing in the definition of average speed:

[tex]average speed=\frac{800 m}{201 s}[/tex]

you get:

average speed= 3.98 [tex]\frac{m}{s}[/tex]

The average speed is 3.98 [tex]\frac{m}{s}[/tex]

Answer:

3.98 m/s

Explanation:

To find speed, use the formula:

Speed = Distance / time

The Distance is 400 + 400 = 800 m

The time in seconds is (60 + 32) + (60 + 49) = 201 sec

Now use the formula

Speed = 800 m / 201 s = 3.98 m/s

What is the energy of a 478 kg object that is moving with a speed of 15 m/s

Answers

I’m sorry if I get this wrong but I’m pretty sure it’s 31.8

Problem #2: An apple is thrown upward with an initial velocity of +24.0 m/s. a. Sketch the apple's trip and label what you know. b. How high will the apple go? (Ans: +29.4 m) c. What is the total time needed for the apple to return to its original position? (Ans: 4.90 s)

Answers

Answer:

The answer is below

Explanation:

a) The initial velocity (u) = 24 m/s

We can solve this problem using the formula:

v² = u² - 2gh

where v = final velocity, g= acceleration due to gravity = 9.8 m/s², h = height.

At maximum height, the final velocity = 0 m/s

v² = u² - 2gh

0² = 24² - 2(9.8)h

2(9.8)h = 24²

2(9.8)h = 576

19.6h = 576

h = 29.4 m

b) The time taken to reach the maximum height is given as:

v = u - gt

0 = 24 - 9.8t

9.8t = 24

t = 2.45 s

The total time needed for the apple to return to its original position = 2t = 2 * 2.45 = 4.9 s

Warmer weather caused Galetown to have more severe storms.

Answers

Answer:

it will have to rise higher in the  before the temperature of the air parcel and the surrounding air are equal. Which means the climate has rised

Explanation:

The climate rised

hope this helps!

Other Questions
Select the correct answer.Which fracture allows the bone to stay in alignment and continue to move?A. Closed fractureB. Displaced fractureC. Non-displaced fractureD. None of the above PLS HELP What is the most helpful element in the periodic table of elements, and what, in your opinion, is the best element? Name a pair of acute vertical angles Do you think the media in South Africa is able to freely provide information without government censorship? The voice that beautifies the land!The voice above,The voice of the thunderWithin the dark cloudAgain and again it sounds,The voice that beautifies the land.Which message does the repetition in the stanza make clear?The sound of thunder up above, crashing repeatedly, makes the natural landscape beautiful.The crashing of the thunder as it rolls over the land is everywhere and makes the people nervous.The thundering sounds of the storm are everywhere and can make nature a dangerous place.Some thunder is coming over the landscape, but it appears that it will only be temporary. Write down five important skills that you will use in Drama. Write a simple sentence with a compound subject. Urbanization led to many of the ills of American society during the Progressive era.2 pointsTrueFalse Which is NOT characteristic of an epic? I REALLY NEED THIS PLEASEE! What was the primary reason for enacting the Bill Of Rights A. To more clearly define the implied powers granted to CongressB. To create confusion and stall the federal governments efforts to grow too quicklyC. To protect the civil rights of the American people D. To demonstrate unequivocally that the Constitution was designed to be changed Please Answer It If You Know The Answer. An object at rest starts accelerating.If it travels 20 meters to end up going 10 m/s.what was its acceleration?Variables:Equation and Solve: He led the First Regiment of U.S. Calvary Volunteers (cowhands and college students) known as the Rough Riders. who is he? Dina has several small clay pots. She wants to display them in order of height, from shortest to tallest. What will be the order of the pots? help on tape diagrams This need help jxb... reeeeeeeeeeeeeeeeeeeeev an elk eats grass. a grizzly bear eats the elk. this is an example is a ____. A. pyramid of numbers B. successionC. food chainD. food web Determine the ordered pair that satisfies the equation, -5x - 6y = -8. Read and choose the best words or expressions that connect to the image. El lpiz El bolgrafo La regla La mochila What do you know about letters? What is the first thing you think of whenyou think of a letter? Is a letter personal or impersonal? Why wouldsomeone write a letter?