Answer:
True
ANTI MEANS AGAINST
Explanation:
in what area of the united states do the fewest people live
Answer:
The most populous state in the United States is California, which has 37,253,956 inhabitants. On the other hand, the least populated state is Wyoming with 493,782 inhabitants.
Answer: Alaska. Alaska is by far the least densely populated of the US states and has 1.3 persons per square mile.
Explanation:
Hope it helped .
Methods used to separate heterogeneous mixtures include the following: check all that apply. *
Decanting
Filtration
Sifting
Answer:
Filtration, Sifting and Decanting
Explanation:
Heterogenous mixtures can be seperated by filtration and sifting (Also known as sieving). Sifting is the process of parting a mixture using a sieve. Sifting is used to separate solid mixtures that contain molecules of varying sizes. Filtration is the process of separating a liquid from an insoluble solid. A common example is using a funnel and a coffee filiter to seperate the liquide from the insoluable solid. Although there are many other methods for filtration. You can also separate mixtures by decantation. Decantation is the process of separating a liquid from a solid/liquid by removing the liquid layer at the top from the layer of solid/liquid below.
A sample of a gas in a 4L container at 300K has a pressure of 1 atm. If the
temperature is increased to 600K and the volume is decreased to 2L , the
pressure is likely to be closest to which of the following? *
O 0.5 atm
1 atm
4 atm
2 atm
The final pressure of the gas in the container is 4 atm
From the question given above, the following data were obtained:
Initial volume (V₁) = 4 L
Initial temperature (T₁) = 300 K
Initial pressure (P₁) = 1 atm
Final temperature (T₂) = 600 K
Final volume (V₂) = 2 L
Final pressure (P₂) =?Using the combine gas equation, we can obtain the final pressure of the gas as illustrated below:[tex]\frac{P_{1} V_{1} }{T_{1}} = \frac{P_{2} V_{2}}{T_{2}}\\\\\frac{1 * 4}{300} = \frac{P_{2} * 2}{600} \\\\[/tex]
Cross multiply
300 × 2 × P₂ = 4 × 600
600 × P₂ = 2400
Divide both side by 600
[tex]P_{2} = \frac{2400}{600} \\\\[/tex]
P₂ = 4 atmTherefore, the final pressure of gas is 4 atm.
Learn more: https://brainly.com/question/23558057
I do believe i need help.....
Answer:
C,D, and A I believe
Explanation:
Which of the following describes how photochemical smog is bad for the environment?
1. Decreases crop yields
II. Interferes with amount of sunlight reaching plants
III. Mixes with moisture and becomes acidic
OI and 11
Oll and III
O I and III
O I, II, and III
Answer:
Its l and ll
Explanation:
it doesn't mix with moisture that would be sulfurous smog
Answer: 1 and 3
qwq rawr
When a substance changes from a solid to a liquid, is a new substance made?
Answer:
no
Explanation:
it means melting or fusion so yhe answer is no
A substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
What are the states of matter?The states of matter can be defined as one of the several configurations in which matter can exist.
There are basically three states of matter.
Solid - It is defined as hard, distinct in volume and shape. Atoms and molecules are joined together to form solids.Liquid - It is defined as defined volume with the ability to flow and change shape. Atoms and molecules are only weakly bound together in liquids.Gases - It is defined as no clear shape or volume.Thus, a substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
To learn more about states of matter, refer to the link below:
https://brainly.com/question/9402776
#SPJ2
Why is productivity greatest near the ocean’s surface
Answer:
Sunlight penetrates the top layers of the ocean, so photosynthesis occurs there.
Explanation:
What is the pressure in millimeters of mercury inside a container of gas.
Why can Marco hear the music, even though he is not in the same room as the speaker?
Answer:
Sound Travels
Explanation:
Sound waves can travel, and that makes it so that even though Marco is in a different room, he can hear the music. Depending how loud the music is and how thick the walls car, the sound can travel through the walls.
which of the following properties of an electron in an atom can be expressed with quantum numbers? energy linear momentum angular momentum spin
The two properties of an electron which can be expressed with quantum numbers are angular momentum and spin.
The properties of an electron in an atom can be represented using four sets of quantum numbers. These four sets of quantum numbers include;
Principal quantum numberOrbital quantum numberMagnetic quantum numberSpin quantum numberAmong the options given in the question, the two properties of an electron which can be expressed with quantum numbers are angular momentum and spin.
Learn more: https://brainly.com/question/967776
¿Cuáles son las características que presentan las enzimas? Explica cada una
Answer:
Acelera las reacciones químicas.
Se requieren en cantidades mínimas.
Son muy específicos en su acción.
Se ven afectados por la temperatura.
Se ven afectados por el pH.
Algunos catalizan reacciones reversibles.
Algunos requieren coenzimas.
Son inhibidos por inhibidores.
Explanation:
An unknown element sample has 2 isotopes present. The first isotope has a mass of 6.017 amu and is
7.30% abundant. The second has a mass of 7.018 amu and an abundance of 92.7%. Calculate the
average atomic mass of this element
Answer:
Calculating Atomic Mass
Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass.
Explanation:
have a nice day
How to find formula for ionic compounds.
Answer:
I am using an example for this in this table it works for any other compound as well.
Why do some experiments blow up?
Answer:
because of chemical reactions
Answer:
gases expand rapidly because their particles move at high speeds in all directions
True of False: The 8-Step Problem Solving Process was developed as an intended expansion of OODA Loop.
The 8-Step Problem Solving Process is vital to solving problems in an organized way and it's an extended form of OODA Loop. Therefore, it's logically true.
The 8-Step Problem Solving Process include the following:
Defining the problem.Clarifying the problem.Defining the goals.Identification of the root cause of the problem.Development of an action plan.Executing action plan.Evaluating the results.Continuous improvement.It should be noted that the 8-Step Problem Solving Process was developed as an intended expansion of the OODA Loop. Therefore, the statement is true.
Read related link on:
https://brainly.com/question/25690509
An alpha particle is equivalent to the nucleus of an atom of which element?(1 point)
A hydrogen
B helium
C nitrogen
D carbon
ill mark brainliest!!!
Answer: An alpha-particle is identical to the nucleus of a normal (atomic mass four) helium atom i.e. a doubly ionised helium atom. Alpha particles (also termed alpha radiation or alpha rays) was the first nuclear radiation to be discovered, beta particles and gamma rays were identified soon after.
Answer: D. Carbon
Explanation: Because I said so.
Hope this helps.
What would happen if we didn’t have the Milky Way
Describe how the suspects used the chemicals found at the crime scene to make the copper coins look silver.
The chemicals found at the crime scene although not mentioned must be Sodium zincate.
Discussion:
An interesting demonstration to show plating and alloys is the conversion of copper coins to silver look-alike coins.
A 'copper' coin when dipped into a solution of sodium zincate in contact with zinc. The coin is plated with zinc and appears silver in colour.
This is a common chemistry classroom trick.
Read more on plating:
https://brainly.com/question/20078989
Question ( please help me )
1 . Which diagram shows pure substance that are elements
2. Which diagram shows pure substance are compounds
3. Which diagram shows a mixture of compounds
4. Which diagram shows a mixture of elements
5. Which diagram shows a mixture of an element and a compound
Answer:
1. F, H, E
2. A, D, I
3. G
4. E, B, H
5. C
Explanation:
The energy released by a nuclear fusion reaction is produced when
1. energy is converted to mass
2. mass is converted to energy
3. heat is converted to temperature
4. temperature is converted to heat
Answer:
2
Explanation:
energy produced in nuclear fusion or even fission is due to mass defect and it can be calculated by Einstein equation e=mc2
The statement, that describes energy released by a nuclear fusion reaction is produced is "mass is converted to energy."
What is nuclear fusion?Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.
A fusion reaction occurs when two light nuclei combine to form a single heavy nucleus. Because the overall mass of the resulting single nucleus is smaller than the mass of the two initial nuclei, the process releases energy.
That is, nuclear energy refers to the energy released as a result of mass loss during the nuclear fusion processes. Both of these processes transform mass loss into energy in accordance with Einstein's mass-energy ratio, E = [tex]mc^{2}[/tex]. As a result of the fusion reaction, mass is destroyed and energy is released.
Hence, the correct answer is 2.
Learn more about nuclear fusion here
https://brainly.com/question/12701636
#SPJ2
What does it mean when an element turns into an ion?.
Answer:
When a neutral atom gains one or more electrons, the number of electrons increases while the number of protons in the nucleus remains the same. The result is that the atom becomes an anion—an ion with a net negative charge.
Explanation:
what is the answer ??z???????
Answer:
I think its Female
Explanation:
Correct me if I was wrong :)
Answer: The answer to this question about the given multiple choices about filling the blank with a missing word in order for you to complete the given statement is "Chest broadens, hips broaden and becomes the rounders. These characters are in the females."
Explanation: I chose B) "Females" for the correct answer in order to fill in the blank with a missing word for you to complete the given statement, so here's the completed statement again, "Chest broadens, hips broaden and becomes the rounders. These characters are in the females.".
I hope my answer with the given multiple choice answer and the given explanation is very helpful to your own chemistry question about the given multiple choices about filling the blank with a missing word in order for you to complete the given statement, please mark me as Brainliest and have a great day! :D
Sincerely,
Jason Ta,
The ambitious of Brainly and the role of The TDSB and WHCI Student of the high school.
A bar of copper (Copper = 0.385 J/g.°C) and a bar of aluminum (Aluminum = 0.897 J/g.°C) have the same mass. Which requires more energy to increase the temperature from 20°C to 30 °C?
Answer:
Aluminum
Explanation:
in hydrogen iodide __________________ are the most important intermolecular forces.
Answer:
dipole-dipole forces
Explanation:
The important intermolecular force in hydrogen iodide HI is dipole- dipole forces. This force is arising due to the partial charge separation and permanent dipole moment.
What is dipole-dipole force?There are various intermolecular forces which binds two atoms chemically to form a compound. Ionic bonding, covalent bonding, dipole -dipole force, hydrogen bonding, Van der Waals force etc are some of them.
Dipoles are opposite charges separated by a small distance. Dipole -dipole force is generated between the atoms when they have partial charge separation and this creates a permanent dipole moment.
Hydrogen is an electropositive atom and iodine is slightly electronegative. This difference in electronegativities leads to the bonded electrons more attracted towards iodine result in partial charge separation and dipole-dipole force.
To find more on dipole-dipole forces, refer here:
https://brainly.com/question/14195217
#SPJ2
most transition metal ions contain partially occupied ________ subshells.
Explain what is wrong with this electron dot diagram for the element nitrogen
The table below gives the atomic mass and relative abundance values for the three isotopes of element M.
Relative abundance (%) Atomic mass (amu)
78.99 23.9850
10.00 24.9858
11.01 25.9826
What is the average atomic mass (in amu) of element M?
2.86
5.36
24.30
24.98
Answer:
24.30
Explanation:
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)/100
24.30 is the average atomic mass (in amu) of element M.
What is an atomic mass?Atomic mass is the quantity of matter contained in an atom of an element.
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)
2430.501576 ÷ 100
24.30
Hence, 24.30 is the average atomic mass (in amu) of element M.
Learn more about atomic mass here;
https://brainly.com/question/14250653
#SPJ2
Help will give brainlyness
Use your periodic table, notes on transition metals, and polyatomic ion table to correctly answer the following:
What is the ionic compound formed from calcium and sulfide ions?
Select one:
O a.
Cas
O b. Ca s
O c. CaSO4
O d. CazS2
Answer:
The high melting point is also consistent with its description as an ionic solid. In the crystal, each S2− ion is surrounded by an octahedron of six Ca2+ ions, and complementarity, each Ca2+ ion surrounded by six S2− ions.
Explanation:
You can use the periodic table to predict whether an atom will form an anion or a cation, and you can often predict the charge of the resulting ion. Atoms of many main-group metals lose enough electrons to leave them with the same number of electrons as an atom of the preceding noble gas. To illustrate, an atom of an alkali metal (group 1) loses one electron and forms a cation with a 1+ charge; an alkaline earth metal (group 2) loses two electrons and forms a cation with a 2+ charge, and so on. For example, a neutral calcium atom, with 20 protons and 20 electrons, readily loses two electrons. This results in a cation with 20 protons, 18 electrons, and a 2+ charge. It has the same number of electrons as atoms of the preceding noble gas, argon, and is symbolized Ca2+. The name of a metal ion is the same as the name of the metal atom from which it forms, so Ca2+ is called a calcium ion.
When atoms of nonmetal elements form ions, they generally gain enough electrons to give them the same number of electrons as an atom of the next noble gas in the periodic table. Atoms of group 17 gain one electron and form anions with a 1− charge; atoms of group 16 gain two electrons and form ions with a 2− charge, and so on. For example, the neutral bromine atom, with 35 protons and 35 electrons, can gain one electron to provide it with 36 electrons. This results in an anion with 35 protons, 36 electrons, and a 1− charge. It has the same number of electrons as atoms of the next noble gas, krypton, and is symbolized Br−. (A discussion of the theory supporting the favored status of noble gas electron numbers reflected in these predictive rules for ion formation is provided in a later chapter of this text.)
complete the word equations below to show how the metals are extracted from their oxides: 1) tin oxide + carbon ---> .........? + .......? 2) lead oxide + carbon ----> ......? + ......?
Answer:
1.) Tin oxide + Carbon → Tin + Carbon monoxide.
2.) Lead oxide + Carbon → Lead + Carbon monoxide.
These equations show that the metals are being extracted by their oxides by heating with carbon. This is because the metals (Tin and Lead) are less reactive than carbon. Remember, extraction methods of metals are determined by their reactivity. Since the elements tin and lead are less reactive than carbon, the extraction process of heating with carbon is needed. Remember that when a metal heats with carbon, the carbon displaces the metal from the compound and removes the oxygen from the oxide. Leaving you with the metal and carbon monoxide.
Which of the following are needed to calculate the percent yield? Select all that apply. Question 10 options: Theoretical yield Actual yield Excess yield Limiting yield
Both theoretical and actual yields would be needed to calculate percent yield.
The percent yield of a reaction is defined as the ratio of the actual yield to that of the theoretical yield. It can be mathematically expressed as:
percent yield = actual yield/theoretical yield x 100%
The actual yield is the amount of a specific product produced from a reaction while the theoretical yield is the stoichiometric amount of the same product.
More on percent yield can be found here: https://brainly.com/question/2506978?referrer=searchResults