Answer:
true i believe
Explanation:
Answer:
true
Explanation:
true because other guy said it lol
in the figure if coefficient of friction between block and surface is 0.2 then find acceleration produced by the resultant force acting on the block (take g= 10 m/s²)
☃ First of all we have to calculate frictional force by using below equation :
→ F = μR
→ F = 0.2 × 5 × 10
→ F = 10 N
Hence,the frictional force (F) is 10 N.☃ But we know that frictional force is acting on opposite direction of the motion :
⇏Net force = 15 - 10
⇏Net force = 5 N
Hence,the net force is 5 N.☃ By using Newton's second law we get :
Let the required acceleration produced by the block be 'a'.➝ Force = mass × acceleration
➝ 5 = 5 × a
➝ a = 5 ÷ 5
➝ a = 1 m/s²
Hence,the acceleration produced by the resultant force acting on the block is 1 m/s².From the anatomical position, the digits are ____ to the brachium.
A. Anterior
B. Inferior
C. Superior
D. Medical
Which is true of low resistance wires
Answer:
the cooler the wire, the less the resistance
Developing study routines is a way to organize
a. Yes
b. No
Answer:
a. yes
Explanation:
................
what energy conversion takes place when a solar cell is used to light a street lamp?
Answer:
Explanation:
Electrical energy is the correct answer
Answer:
Is B
Explanation:
Which wave has a longer wavelength?
psychology: Echoic sensory memory is used when a lightning bolt flashes across the sky. Please select the best answer from the choices provided T F
Answer:
The answer is False
Explanation:
Echoic sensory memory is used when a lightning bolt flashes across the sky. This is false statement.
What is echoic sensory memory?Echoic memory is a type of sensory memory that registers and stores auditory information (sounds) until it is processed and understood (Carlson, 2010). This sensory store can hold a large amount of auditory information for 3 to 4 seconds (Clark, 1987).
Echoic Memory Examples:
While listening to music: When we listen to music, our brains recall each note briefly and connect it to the next note. As a result, the brain recognizes the note sequences as a song.Conversation: When we hear spoken language, our echoic memories retain every individual syllable. Our brains understand words by associating each syllable with the one before it.Learn more about echoic memory here:
https://brainly.com/question/3812421
#SPJ6
Need help ASAP plsss
Write 5-6 sentences about
:how do parachutes work ??
A ripcord system pulls a closing pin, which releases a spring-loaded pilot chute, and opens the container; from which the parachute comes out.
If a skydiver is unable to open her/his parachute, an automatic activation device will automatically open the parachute.
A parachute works by forcing air into the front of it and creating a structured 'wing' under which the canopy pilot can fly. Parachutes are controlled by pulling down on steering lines which change the shape of the wing, cause it to turn, or to increase or decrease its rate of descent.
What must a scientist do in order to develop a testable hypothesis? O A. Find out whether the idea would be interesting to other scientists. O B. Determine whether the conclusion is supported by popular opinion. C. Ask a question that can be answered by making observations. D. Research accepted scientific theories to find one that is wrong.
Answer: C. Ask a question that can be answered by making observations.
Explanation: Just did it
What are stars made up of at the beginning?
Answer:
The stars were always made of hot gas a million miles away from here
Explanation:
I study stars
In a physics lab experiment for the determination of moment of inertia, a team weighs an object and finds a mass of 4.67 kg. They then hang the object on a pivot located 0.180 m from the object's center of mass and set it swinging at a small amplitude. As two of the team members carefully count 129 cycles of oscillation, the third member measures a duration of 249 s. What is the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis
Answer:
The value is [tex]I_o = 0.6257 \ kgm^2[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m = 4.67 \ kg[/tex]
The position of the pivot from the center of the mass is [tex]a = 0.180 \ m[/tex]
The number of cycles of oscillation is [tex]n = 129 \ cycles[/tex]
The time taken for the total oscillation is t =249 s
Generally the period of the oscillation is mathematically represented as
[tex]T = \frac{t}{n}[/tex]
=> [tex]T = \frac{249}{129}[/tex]
=> [tex]T = 1.9302 \ s[/tex]
Generally the moment of inertia of the object about the end of the suspension is mathematically represented as
[tex]I =[ \frac{T}{2 \pi } ]^2 * [m* g * l ][/tex]
=> [tex]I =[ \frac{1.9302}{2 *3.142 } ]^2 * [4.67* 9.8 * 0.180 ][/tex]
=> [tex]I = 0.777 \ kg m^2[/tex]
Generally the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis is mathematically evaluated using the parallel axis theorem as
=> [tex]I_o = I- I_p[/tex]
Here [tex]I_p[/tex] is parallel axis contribution which is mathematically represented as
[tex]I_p = m * l^2[/tex]
=> [tex]I_p = 4.67 * 0.180^2[/tex]
=> [tex]I_p = 0.1513 \ kg m^2[/tex]
So
[tex]I_o = I- I_p[/tex]
=> [tex]I_o = 0.777 -0.1513[/tex]
=> [tex]I_o = 0.6257 \ kgm^2[/tex]
A solid ball is rolling along a horizontal surface at 3.7 m/s when it encounters an upward
incline. If it rolls without slipping up the incline, what maximum height will it reach?
Answer:
h = 0.697 [m]
Explanation:
To solve this problem we must use the energy conservation theorem, where it tells us that kinetic energy is converted to potential energy or vice versa.
[tex]E_{kinet}=E_{pot}[/tex]
where:
Ekinet = kinetic energy [J]
Epot = potential energy [J]
[tex]\frac{1}{2}*m*v^{2}=m*g*h\\0.5*(3.7)^{2} =9.81*h\\h =(6.845)/9.81\\h = 0.697 [m][/tex]
Joe applies a force of 50 N to a box which has a mass of 15 kg. What is the acceleration of the box?
a.
Answer:
3.333 m/s^2
Explanation:
50/15 = 3.33 m/s^2
What is the volume of a brick that is 30 cm long, 8 cm wide, and 10 cm tall?
Which answer below most accurately describes both cells?
Translatory motion and Circular motion difference between
Correct question is;
What is the difference between Translatory motion and Circular motion.
Answer:
Outlined below
Explanation:
Circular motion is the motion whereby all the particles of a body move along the circumference of a circle while Translatory motion is one in which all particles move in a straight line or a curved fixed part.
Another difference is that in circular motion, the distance moved by all particles vary based on the distance moved from the centre of the circle while in Translatory motion, the distance covered by all particles is equal.
What energy transformation takes place in the
solar panel?
What are the effects of hot rolling on the metal grain structure?
Answer:Mark me as the brainliset
Explanation:The rollers impart compression stresses, while squeezing the metal. These results in changes of grains, grain fragmentation, and lattice distortion. In hot rolling the coarse grains are converted into smaller grains. Care has been taken that the correct range of temperature is maintained during the process.
A bowling ball weighing 71.2 N is swinging like a pendulum at the end of a 3.8 m rope. As the ball swings through its lowest point, its speed is measured at 4.2 m/s. What is the magnitude and direction of the acceleration of the ball at this point?
At its lowest point, the ball feels a downward force due to its weight of 71.2 N and an upward force of tension from the rope. Its motion is circular, so that the net radial acceleration is felt upward toward the center of the circle.
With a tangential speed of 4.2 m/s at the lowest point, its radial acceleration has magnitude
a = (4.2 m/s)² / (3.8 m) ≈ 4.6 m/s²
A 2800 kg speedboat starting from rest attains a speed of 16 m/s in 8.0 s as a combination of 1200 N of air resistance and water drag act on the boat. How much power is being expended by speedboat at the maximum speed?
Answer:
For me
Explanation:
first of all
find the distance=speed×time
16×8=128
power= workdone /time
power=force×distance/time
power=1200×128/8
power=153600/8
powere=19200
A small sphere of mass m and charge –q is released from rest at point T. If the electric potentials at points S and T are VS and VT, respectively, what is the speed of the sphere when it reaches point S? Ignore the effects of gravity.
(A) 2q/m(Vs + VT)
(B) 4q/m(Vs + VT)
(C) q/2m(Vs - VT)
(D) q/2m (Vs + VT)
(E) 2q/m(Vs - VT)
Answer:
(E) √[2q/m(Vs - VT)]
Explanation:
Since the charge -q moves from VT to VS, the potential difference is VT - VS.
The work done in moving the charge q across a potential difference V is given by W = qV.
Now, the work done in moving the charge -q across that potential difference VT - VS is thus W = -q(VT - VS) = -q[-(VS - VT)] = q(VS - VT). This work equals the sphere's kinetic energy and kinetic energy equals K = 1/2mv² where m = mass of sphere and v = speed of sphere.
So, K = W
1/2mv² = q(VS - VT)
v² = 2q/m(VS - VT)
taking square root of both sides, we have
v = √[2q/m(Vs - VT)]
A 1.13 kg skateboard is coasting along the pavement at a speed of 4.28 m/s when a 0.93
kg cat drops from a tree vertically downward onto the skateboard. What is the speed of the
skateboard-cat combination?
By conservation of momentum,
Pinitial = Pfinal
m1v1 + m2v2 = (m1 + m2)*vf
m1 = mass of skateboard = 1.13 kg
m2 = mass of cat = 0.93 kg
v1 = initial velocity of skateboard = 4.28 m/s
v2 = initial velocity of cat = 0 m/s
vf = final velocity of skateboard-cat combo
So plug in the values and solve for vf,
1.13(4.28) + 0.93(0) = (1.13 + 0.93)vf
vf = 2.35 m/s
A little girl pushes a 5.0 kg toy baby stroller at constant speed 7.0 m across the floor. She pushes on the handle with a force of 40 N at an angle of 30o with the horizontal. All parts are 4 points each.
Complete Question
1 a A little girl pushes a 5.0 kg toy baby stroller at constant speed 7.0 m across the floor. She pushes on the handle with a force of 40 N at an angle of 30o with the horizontal. How much work is done by the girl on the wagon?
1b A farmhand pushes 20 ㎏ bale of hay 4m across the floor of the barn if she exerts a horizontal force of 60 N on the hay, how much work is done? (5 pts)
All parts are 4 points each
Answer:
1a
[tex]W = 242.5 \ J[/tex]
1b
[tex]W = 240 \ J[/tex]
Explanation:
Considering question a
From the question we are told that
The mass of the toy baby stroller is [tex]m = 5.0 \ kg[/tex]
The distance covered is [tex]d = 7.0\ m[/tex]
The force the girl applies on the handle is [tex]F = 40 \ N[/tex]
The angle at which this force is applied is [tex]\theta = 30^o[/tex]
Generally the workdone is mathematically represented as
[tex]W = F_x * d[/tex]
Here [tex]F_x[/tex] is the force along the horizontal axis , this is mathematically represented as
[tex]F_x = F cos (\theta )[/tex]
=> [tex]F_x = 40 * cos(30 )[/tex]
=> [tex]F_x = 34.64 \ N[/tex]
So
[tex]W = 34.64 * 7[/tex]
=> [tex]W = 242.5 \ J[/tex]
Considering question b
From the question we are told that
The mass of the toy baby stroller is [tex]m = 20 \ kg[/tex]
The distance covered is [tex]d = 4 \ m[/tex]
The force the girl applies on the handle is [tex]F = 60 \ N[/tex]
Generally the workdone is mathematically represented as
[tex]W = F * d[/tex]
=> [tex]W = 60 * 4[/tex]
=> [tex]W = 240 \ J[/tex]
In a step-down transformer the secondary coil is made of thick copper coil.
Explain
(2 marks)
Answer:
In a step-up transformer, the secondary coil is made of same wire as the primary coil but it is rolled with the presence of the insulated which never conduct the opposite current to the coil.
Hence it function property without meeting any fire and other problem.
Even if you want to get clear ideas, then you have to go with official website.
What is the resistance of a wire with "p" of .25, a length "L" of 11.2, and an area "A" of 1.26?
Answer:
Resistance = 2.2 Ohms.
Explanation:
Given the following data;
Resistivity, P = 0.25
Length, L = 11.2
Area, A = 1.26
To find the resistance.
Resistance is given by the formula below;
Resistance = PL/A
Substituting into the equation, we have;
Resistance = (0.25*11.2)1.26
Resistance = 2.8/1.26
Resistance = 2.2 Ohms.
Therefore, the resistance of the wire is 2.2 Ohms.
10. A 90 kg box is sliding across a surface at a constant velocity while experiencing a rightward applied
force of 40 N. Calculate the force of friction acting on the box.
A. -40N
B. +40N
C.-2.5 N
D. 0 N
If the box is moving at constant velocity, net force must be zero, so:
F + fr = 0
fr = -F
fr = -40 N
What is the turning effect of a force?
A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.
Answer:
A force may cause an object to turn about a pivot. The turning effect of a force is called the moment of the force. Moments act about a pivot in a clockwise or anticlockwise direction.
Explanation:
The rate of change of velocity or speed is known as acceleration. If a car increases it speed form 10 to 20m/s in 2 seconds, then what is its rate of change in velocity?
A) 5 m/s/s
B) 10 m/s/s
C) 20 m/s/s
D) 40 m/s/s
Answer:
A) 5 m/s/s
Explanation:
Given the following data;
Initial velocity = 10m/s²
Final velocity = 20m/s²
Time, t = 2 seconds.
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.
Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.
Mathematically, acceleration is given by the equation;
[tex]Acceleration, a = \frac{final \; velocity - initial \; velocity}{time}[/tex]
Substituting into the equation, we have;
[tex]Acceleration, a = \frac{20 - 10}{2}[/tex]
[tex]Acceleration, a = \frac{10}{2}[/tex]
Acceleration, a = 5m/s²
1. If a 4000 kg rocket reaches 7,000 m/s in 8 minutes after blastoff, what is its acceleration?
2. What force is being applied to the rocket?
3. What is the rocket's potential energy when it is 12 km off the ground?
(Hint - Change kilometers to meters)
4. If the rocket were to fall from the 12 km height, what would be its speed right before hitting the ground? (assume no air resistance)
+ answer all the questions plz
Answer:
I guess the Ans for second one is gravitational force
What effect does atmospheric pressure have on density?
Answer:sometimes it commits to how it will happen
Explanation:
Answer:
Atmospheric pressure increases density
Explanation:
Atmospheric pressure decreases the volume of space, since volume is inversely proportional to density, density will increase.