False. The specific heat at constant volume of a particular gas, at room temperature, is dependent not only on its molecular mass but also on the number of atoms and molecules in the gas.
Different gases have different molecular masses, and the specific heat at constant volume for a particular gas is therefore not fixed.
For example, the molecular mass of oxygen is 32 g/mol, but its specific heat at constant volume is 0.214 kcal/kg⋅K at room temperature, while nitrogen has a molecular mass of 28 g/mol and a specific heat at constant volume of 0.241 kcal/kg⋅K.
Therefore, the statement that the specific heat at constant volume of a particular gas is 0.182 kcal/kg⋅K at room temperature, and its molecular mass is 34 is false.
Learn more about the specific heat of molecules:
https://brainly.com/question/29726003
#SPJ4
NMR signals may consist of a single peak, or they may be __ into several peaks. The number of peaks for a particular signal is called its __.split; multiplicitytype; equivalentHydrogen; Decreasesdeshielded; high
NMR signals may consist of a single peak, or they may be spilt into several peaks. The number of peaks for a particular signal is called its multiplicity.
Nuclear Magnetic Resonance (NMR) Spectroscopy
Nuclear Magnetic Resonance (NMR) Spectroscopy is defined as the number of NMR signals represents the number of different types of protons in a molecule. Let's consider an example that we have used in the introduction to NMR spectroscopy. Generally, the spectrum has five signals which indicates five types of different protons.
An NMR instrument works by allowing the molecular structure of a material to be analyzed by observing and measuring the interaction of nuclear spins when placed in a powerful magnetic field.
Learn more about NMR signals from the link given below.
https://brainly.com/question/29885193
#SPJ4
how many moles of NaCl can be produced from 2.5 moles of BaCl2?
Pls do step-by-step
Answer:
The balanced chemical equation for the reaction between BaCl2 and Na2SO4 is:
BaCl2 + Na2SO4 → 2 NaCl + BaSO4
This equation shows that one mole of BaCl2 reacts with one mole of Na2SO4 to produce two moles of NaCl and one mole of BaSO4. Therefore, to determine how many moles of NaCl can be produced from 2.5 moles of BaCl2, we need to use the stoichiometry of the reaction.
Steps:
Step 1: Write down the balanced chemical equation for the reaction between BaCl2 and Na2SO4.
BaCl2 + Na2SO4 → 2 NaCl + BaSO4
Step 2: Identify the stoichiometric ratio of BaCl2 to NaCl from the balanced chemical equation.
From the balanced chemical equation, we see that 1 mole of BaCl2 produces 2 moles of NaCl.
Step 3: Calculate the number of moles of NaCl produced from 2.5 moles of BaCl2.
Using the stoichiometric ratio, we can calculate the number of moles of NaCl produced from 2.5 moles of BaCl2 as follows:
2.5 moles BaCl2 x (2 moles NaCl / 1 mole BaCl2) = 5 moles NaCl
Therefore, 2.5 moles of BaCl2 can produce 5 moles of NaCl.
who was a synthetic organic chemist that successfully synthesized physostigmine ?
The synthetic organic chemist who successfully synthesized physostigmine was Robert Burns Woodward.
He was an American organic chemist who is considered by many to be the preeminent organic chemist of the twentieth century. Woodward's synthesis of physostigmine, an alkaloid found in the Calabar bean, was an important milestone in modern organic chemistry. Physostigmine works by obstructing acetylcholine metabolism. The enzyme that breaks down acetylcholine in the synaptic cleft of the neuromuscular junction, acetylcholinesterase, is inhibited in a reversible manner by this substance.Woodward's method of synthesizing physostigmine was the first successful total synthesis of a complex natural product, and it established the precedent for modern organic synthesis.
learn more about physostigmine Refer:brainly.com/question/14409823
#SPJ4
the colligative molality of seawater is approximately 1.10 m. calculate the vapor pressure of sea water at 20 °c. the vapor pressure of pure water at 20 °c is 17.54 torr.
the colligative molality of seawater is approximately 1.10 m, the vapor pressure of sea water at 20 °c is 16.412 torr, the vapor pressure of pure water at 20 °c is 17.54 torr.
What is vapour pressure?Vapour pressure rises with temperature and is a measurement of a substance's propensity to transform into a gaseous or vapour state. The boiling point of a liquid is the temperature at which the pressure imposed by its surroundings equals the vapour pressure present at the liquid's surface. A liquid's thermodynamic propensity to evaporate is indicated by the equilibrium vapour pressure.
Given that-
Vapor pressure of pure water (P₀) = 17.54 torr
Molality (m) = 1.10 m
Let, vapour pressure of sea water = P
As we know,
m = [(P₀ - P) / P₀] × (1000 / M(solute))
1.10 = [(17.54 - P) / 17.54] × (1000 / 58.44)
P = 16.412 torr [considering NaCl in sea water]
Hence, vapour pressure of sea-water is: 16.412 torr
To know more about colligative molality refer to:
https://brainly.com/question/14611438
#SPJ1
what is the formular of ammonia
NH3
Why are you using brainly for this simple question? Search history being checked?
Answer:
[tex]NH_{3}[/tex]
Explanation:
Structure and Formula of Ammonia
Its chemical formula is NH3 and the molar mass is 17.03 g/mol. It is a compound of hydrogen and nitrogen.
What color absorbed by a solution should appear as the given color orange?
Blue is the color absorbed by a solution that should appear as the given color orange. If the material absorbs blue you will glimpse the color orange.
When sunlight shines through an orange solution, the violet, blue and green wavelengths are immersed. The different colors enact through. The transmitted light is the light we see, and it glances orange. Colored liquids or solutions glance colored because they absorb some of the light shined on them. Colored objects look the way they do because of reflected light. When sunlight is shined on a green leaf, the violet, red and orange wavelengths are absorbed. The various wavelengths within the visible part are reliable for the different colors we see.
To learn more about the color absorbed by a solution visit here:
https://brainly.com/question/29423232
#SPJ4
What is an example of an isotonic eccentric contraction?
An example of an isotonic eccentric contraction is when a person lowers a weight during a bicep curl exercise.
Concentric and eccentric contractions are the two varieties of isotonic contractions. When a muscle shortens during a concentric contraction, its tension increases to meet the resistance and then stays constant. As the resistance rises above the force being generated by the muscle during eccentric contraction, the muscle lengthens.
During the lowering phase of a bicep curl exercise, the bicep muscle is contracting eccentrically as it controls the descent of the weight. The muscle is producing force, but the weight is greater than the force produced, causing the muscle to lengthen. This is an example of an isotonic eccentric contraction.
To know more about isotonic contraction here:
https://brainly.com/question/14451293#
#SPJ11
What is kinetic-molecular theory in solids?
The kinetic-molecular theory is a model that describes the behavior of matter at a microscopic level.
In solids, this theory suggests that the particles (atoms or molecules) that make up the solid are in constant motion and are held together by strong intermolecular forces. The particles vibrate about their fixed positions and the amplitude of the vibration increases as the temperature increases. This theory also explains properties such as thermal expansion, specific heat, and thermal conductivity of solids.
You can learn more about kinetic-molecular theory at
https://brainly.com/question/134712
#SPJ4
What is the molecular geometry and molecular polarity for OF2?
The molecular geometry of Oxygen Difluoride molecule, OF₂ is bent shape and the in case of molecular polarity, it is a polar molecule.
We have a Oxygen Difluoride molecule with molecular formula,OF₂. It consists two fluorine atoms and one oxygen atom.
molecular geometry of OF₂The Lewis structure of the OF₂ molecule contains 16 non-bonding electrons, i.e. 8 lone pairs. Out of the 8 lone pairs, 3 lone pairs are present on the fluorine atom and 2 lone pairs are present on the central oxygen atom. The presence of lone pairs on the oxygen atom causes the electrons of the bonded pairs to repel each other. Due to the repulsive forces, the fluorine which is present as outer atoms pushes down to minimize the repulsion according to the VSEPR theory. So, the shape of this molecule is bent.
Molecular polarityIn the OF₂ molecule, the oxygen atom is the least electronegative, i.e., 3.44 and fluorine is highly electronegative, i.e., 3.98. The difference between the electronegativities of both these atoms is greater than 0.5, making the O-F bonds polar. So both single bonds formed between oxygen and fluorine atoms are polar.
For more information about Molecular geometry, refer:
https://brainly.com/question/19354582
#SPJ4
T/F? At the same temperature and pressure, equal volume of gases contains the same number of molecules.
At the same temperature and pressure, equal volume of gases contains the same number of molecules is a true statement.
This statement is known as Avogadro's Law, which states that equal volumes of gases, at the same temperature and pressure, contain the same number of molecules (or moles) regardless of their chemical nature or physical properties.
This means that if we compare two different gases occupying the same volume at the same temperature and pressure, they will contain the same number of molecules.
To know more about the Avogadro's Law, here
brainly.com/question/4133756
#SPJ4
how offten does a lunar eclipse occur
Answer: there could be two lunar eclipses per year
what energy can be used for a decomposition reaction to take place
The energy required to initiate the reaction is called the activation energy.
A decomposition reaction can be initiated by the application of various forms of energy such as heat, light, electricity, and sometimes catalysts.
In the case of thermal decomposition, heat is the source of energy that breaks the bonds between the atoms or molecules in the reactant and leads to the formation of new compounds.
For example, the thermal decomposition of calcium carbonate (CaCO3) to form calcium oxide (CaO) and carbon dioxide (CO2) is a classic example of a thermal decomposition reaction.
Learn more about decomposition reaction:
https://brainly.com/question/27300160
#SPJ4
T or F: The greater the orbital overlap in a bond, the weaker the bond
The greater the orbital overlap in a bond, the weaker the bond is a false statement.
In fact, the opposite is true: the greater the orbital overlap in a bond, the stronger the bond. Orbital overlap refers to the degree to which the orbitals of two atoms participating in a covalent bond interact with each other, with a greater degree of overlap leading to a stronger bond.
This is because the shared electrons spend more time between the nuclei of the bonded atoms, and the resulting electrostatic attraction between the positive nuclei and negative electrons is stronger. The strength of a covalent bond is also influenced by other factors, such as the electronegativity of the atoms involved and the bond length.
To know more about the orbital overlap, here
brainly.com/question/11248057
#SPJ4
e. Which alcohol above produces the most carbon dioxide per mole burned? (1 point)
The alcohol mentioned above generates carbon dioxide in Methanol per mole burnt.
Methanol is a substance with the chemical formula CH3OH. The simplest alcohol, it is a colorless, flammable, light, volatile liquid with a distinct odor that is gentle and sweeter than ethanol.
It functions as an antifreeze, fuel, and solvent for ethyl alcohol while a polar liquid at room temperature. With the help of oxygen and sunlight, methanol is converted into carbon dioxide and water.
Burning methanol in the air produces carbon dioxide and water:
2CH3OH + 3O2 - 2CO2 + 4H20
A methanol flame appears to be practically colorless. To prevent colorlessness on the nearly undetectable fire when burning methanol, precautions should be taken.
To know more about carbon dioxide
https://brainly.com/question/25385913
What happens when an electron moves from a higher energy level to a lower energy level in an atom?
When an electron moves from a higher energy level to a lower energy level in an atom, it releases energy in the form of a photon of electromagnetic radiation. This process is known as emission.
What is Atomic Level?
The atomic level refers to the scale at which individual atoms and their properties are studied. At this level, matter is composed of discrete particles, known as atoms, which are the fundamental building blocks of all chemical elements.
As the energy levels in an atom are quantized, only certain energy transitions are allowed, which correspond to the emission of specific wavelengths of light.
The energy released by the emission can be in the form of visible light, ultraviolet light, or other forms of electromagnetic radiation, depending on the energy levels involved. For example, if an electron moves from the second energy level to the first energy level in a hydrogen atom, it will emit a photon of ultraviolet light.
Emission is one of the ways in which atoms can lose energy and return to a lower energy state. The opposite process, absorption, occurs when an electron is excited from a lower energy level to a higher energy level by absorbing a photon of electromagnetic radiation with an energy equal to the difference between the energy levels.
Learn more about Atomic Level from given link
https://brainly.com/question/20319149
#SPJ4
What are the difference of CMP and CBC?
Red, white, and platelet counts and types, as well as their distribution throughout the blood, are all revealed by CBC. The results of CMP-14 testing reveal the level of blood proteins and sugar.
Why would someone utilize a CMP blood test?
A blood test called the complete metabolic panel (CMP) provides medical professionals with knowledge about the body's electrolyte levels, including sodium and potassium, as well as the kidney and liver's function.
What conditions can a CMP identify?
A CMP can help your doctor identify specific problems including diabetes, renal disease, and hypertension when combined with other tests and data from a clinical evaluation.
To know more about platelets visit:
https://brainly.com/question/8732513
#SPJ1
What is molar mass of benzoic acid?
Molar mass of the benzoic acid is approximately 122.12 g/mol.
The chemical formula of benzoic acid is C₇H₆O₂. To calculate its molar mass, we need to find the atomic masses of each element in the compound and then add them up based on the molecular formula.
The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.
The molar mass of benzoic acid can be calculated as follows:
Molar mass of benzoic acid = (7 x atomic mass of C) + (6 x atomic mass of H) + (2 x atomic mass of O)
Molar mass of benzoic acid = (7 x 12.01 g/mol) + (6 x 1.01 g/mol) + (2 x 16.00 g/mol)
Molar mass of benzoic acid = 122.12 g/mol
To know more about benzoic acid here
https://brainly.com/question/24052816
#SPJ4
how many molecules of water are needed to completely hydrolyze a polymer that is ten monomers long?
The number of the molecules of water are needed to completely hydrolyze the polymer that is ten monomers long is the 9 molecules of water.
A polymer can be defined as the macromolecule which is essentially is the combination of the many subunits. The Polymers will be break down into the monomers is called as the hydrolysis of the polymer, which is the reaction in which the water molecule will be utilize during the breakdown.
One water molecule is use to break the each bond present between the two adjacent monomers in the polymer during the hydrolysis. The ten-monomer of the long polymer that comprises the nine bonds because the two adjacent monomers are joined through the bond. Therefore, the nine water molecules are required to hydrolyze the ten monomers long polymer.
To learn more about polymer here
https://brainly.com/question/4543833
#SPJ4
How do you calculate pH from KOH?
To calculate the pH from KOH, you need to first determine the concentration of the hydroxide ion (OH-) in the solution.
This can be done by using the equation:
[OH-] = [KOH]
Once you have the concentration of the hydroxide ion, you can use the equation:
pOH = -log[OH-]
to find the pOH of the solution. Finally, you can use the equation:
pH = 14 - pOH
to find the pH of the solution.
Here is a step-by-step explanation:
1. Determine the concentration of the hydroxide ion (OH-) in the solution by using the equation:
[OH-] = [KOH]
2. Use the equation:
pOH = -log[OH-]
to find the pOH of the solution.
3. Use the equation:
pH = 14 - pOH
to find the pH of the solution.
By following these steps, you can calculate the pH from KOH.
To know more about pH here:
https://brainly.com/question/15289741#
#SPJ11
a chemical equation is a statement using chemical ____ that expresses both the identities and the relative ____ of the reactants and products involved in a chemical or physical change.A. QuantityB. Formulas
A sample of octane burns releasing 2290 J of heat to the surroundings, and the gases produced expands against a piston to do 560 joules of work. Calculate the internal energy change for this reaction.1. â2850 J2. â1730 J3. â2290 J4. +1730 J5. +2850 J
The internal energy change for the reactions would be -2850 J.
What is meant by First law of thermodynamics?The sign of heat is interpreted as being positive when heat is absorbed and as being negative when heat is expelled.
Work done during the expansion and compression processes is viewed negatively and positively, respectively.
According to the First law of thermodynamics,
Δ U = q + w
where, Δ U be the internal energy
q be the heat absorbed or released = -2290 J
w be the work done = 560 J
simplifying the values in above equation, we get:
Δ U = (-2290) + (-560)
Δ U = -2850 J
Hence, the internal energy change for the reaction would be -2850 J.
Therefore, the correct answer is option 1) –2850 J.
The complete question is:
A sample of octane burns releasing 2290 J of heat to the surroundings, and the gases produced expands against a piston to do 560 joules of work. Calculate the internal energy change for this reaction.
1- –2850 J
2- –1730 J
3- –2290 J
4- +1730 J
5- +2850 J
To learn more about First law of thermodynamics refer to:
https://brainly.com/question/19863474
#SPJ4
Question:
What is the molecular weight of propane (C3H8)?
Molecular Weight:
The molecular weight or molar mass can be calculated based on the chemical formula of the compound which is expressed in terms of grams per mole (grams/mole). For the problem, the given compound is propane and the correct chemical formula was also provided. Aside from the chemical formula, the molar mass of each element involved in the compound must also be provided to determine the molecular weight (or molar mass).
The molecular weight of a propane molecule, (C₃H₈) is equals to the 44.0 g/mol.
We have a Propane molecule, C₃H₈. The organic molecule C₃H₈ is also known as propane. This gas molecule is used in gas grills and propane heaters and appliances. It consists three atom of carbon, eight atoms of hydrogen. The molar mass is defined as the mass of one mole of substance. It is also called molecular weight of substance which is expressed in terms of g/mol. Molecular weight of a molecule is calculated by the addition of the masses of the individual atoms within the their quantities present in a molecule. So, the molecular mass of C₃H₈, is sum of individual masses of carbon, and hydrogen atoms with number of their atoms. The atomic mass of carbon atom, C =12 g/mol
The atomic mass of hydrogen atom, H =1 g/mol
Now, Molar mass of C₃H₈ = 3 × atomic mass of carbon + 8× atomic mass of hydrogen atom
= 3×C + 8×H
= 3× 12 g/mol + 8×1g/mol
= 36 g/mol + 8 g/mol
= 44 g/mol
Hence, the molecular mass of C₃H₈ is 44.0 g/mol.
For more information about molecular weight , visit :
https://brainly.com/question/14596840
#SPJ4
Gases are most ideal at high temperature and low pressure. (T/F)
Answer:
true
Explanation:
An NaCl solution is prepared by dissolving 50.0 g NaCl in 200.0 g ofwater at 25"C What is the vapor pressure of the solution if the vapor pressure of water at 25*C is 23.56 torr? 1.574 tonr 1.686 tOrr 20.41 torr 0.8744 torr 21.87 torr
The vapor pressure of the NaCl solution is approximately 21.87 torr.
To calculate the vapor pressure of the NaCl solution, we can use Raoult's law which states that the vapor pressure of the solvent above the solution is proportional to the mole fraction of the solvent in the solution.
The mole fraction of water in the solution can be calculated as:
X_water = moles of water / total moles
The moles of water can be calculated from the mass of water and its molar mass, and the moles of NaCl can be calculated from its mass and molar mass:
moles of water = mass of water / molar mass of water = 200.0 g / 18.015 g/mol = 11.098 mol
moles of NaCl = mass of NaCl / molar mass of NaCl = 50.0 g / 58.44 g/mol = 0.855 mol
The total moles of solute and solvent in the solution is the sum of the moles of NaCl and water:
total moles = moles of NaCl + moles of water = 0.855 mol + 11.098 mol = 11.953 mol
The mole fraction of water is then:
X_water = moles of water / total moles = 11.098 mol / 11.953 mol = 0.9292
The vapor pressure of the solution can be calculated using Raoult's law:
P_solution = X_water * P_water
where P_water is the vapor pressure of pure water at the given temperature. Substituting the given values, we get:
P_solution = 0.9292 * 23.56 torr = 21.87 torr
Therefore, the vapor pressure of the NaCl solution is approximately 21.87 torr.
Learn more about NaCl solution:
https://brainly.com/question/28123588
#SPJ4
What is the proper Lewis structure for HCOOH?
The proper Lewis structure of HCOOH consists of four atoms and has an oxygen atom in the center with two single bonds to the hydrogen atoms and two double bonds to the carbon atom.
The oxygen atom forms a double bond with the carbon atom by sharing two electron pairs with it and two lone pairs with itself. A single bond is formed between the oxygen atom and two hydrogen atoms, each of which possesses one electron pair.
Four electron pairs are present on the carbon atom: two from the oxygen atom and two lone pairs. One bond is created when the oxygen atom donates one electron pair to each of the two hydrogen atoms.
Learn more about the Lewis structure at
https://brainly.com/question/4144781
#SPJ4
What is the noble gas core in the electron configuration for Ru? A. Ne
B. Ar C. Kr D. Xe E Rn
Answer: C. Kr
Explanation:
Ru is the symbol for rubidium.
Rubidium is a transitional metal. To use the noble gas core, look at the noble gas one row above where rubidium is. Rubidium is in row 5 on the periodic table, so we move up to row 4. Krypton is the noble gas core in the electron configuration for Ru.
The amount of energy required to remove an electron from an isolated atom or molecule is the ionisation potential. There is an ionization energy for each successive electron removed. (True/False)
The assertion is accurate. The ionization potential is the amount of energy needed to expel an electron from an isolated atom or molecule. Each additional electron eliminated causes an increase in ionization energy.
What is meant by electron?The fundamental electric charge of the electron, a subatomic particle, is negative. Due to their lack of known constituents or substructure, electrons—the first generation of the lepton particle family—are frequently regarded as elementary particles.An electron is a negatively charged subatomic particle that can be either attached to or detached from an atom (not bound).Along with protons and neutrons, electrons are one of the three primary types of particles that make up an atom. Protons, neutrons, and electrons make up an atom's nucleus.The electron, which has a negative charge, is the smallest and least substantial part of an atom.To learn more about electron, refer to:
brainly.com/question/26084288
#SPJ4
Based on your knowledge of intra- and intermolecular forces, choose the answer with the compounds listed in order of increasing boiling point.
The strongest types of bonds are ionic bonds, covalent bonds, hydrogen bonds, and van der waals forces.
What is meant by intermolecular forces?The Coulomb or electrostatic force is the strongest intermolecular force and is also the cause of the ionic bonding of salts like NaCl. Although that oversimplifies what actually happens between atoms, it is true that the electrostatic force is attracting for atoms with opposite charges. The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces, or IMF for short.These forces operate as an intermediary between the individual molecules of a substance.Intermolecular forces are responsible for the majority of the physical and chemical characteristics of matter.Intermolecular forces are those that operate between molecules. On the other hand, intramolecular forces work only within molecules.To learn more about intermolecular forces, refer to:
https://brainly.com/question/12243368
#SPJ4
Which statement is true of the role of water in the coffee cup calorimeter you used in the laboratory?
O The water transmits the heat to the thermometer.
O The water is not insulated.
O The water provides an isolated environment.
O The water cools the thermometer.
What is the purpose of using acetone in this experiment? How would you correctly use actone to achieve the desired goal? Essay answers are limited to about 500 words (3800 characters maximum, including spaces)
Acetone is an organic solvent that is widely used in a variety of laboratory and industrial processes. In this experiment, its purpose is to extract a desired product from a sample.
What is the organic ?Organic refers to anything made or grown without the use of synthetic chemicals, pesticides, or genetic engineering. It is a term used to describe a holistic approach to farming and production practices that emphasize the use of natural ingredients and processes. Organic foods, for example, are grown without the use of chemical fertilizers, herbicides, or pesticides, while organic textiles are made with natural fibers, such as cotton and wool, that have been grown without the use of synthetic fertilizers or pesticides.
The process begins by heating the sample in a round bottom flask. As the sample is heated, the desired product boils off and can be collected in a condenser. In order to enhance the separation process and ensure that the product does not become contaminated, acetone is added to the flask.
In order to use acetone correctly, the sample must be heated to the appropriate temperature. A thermometer should be used to ensure that the sample has reached the desired temperature. The acetone should then be added to the flask in small increments.
Once the acetone has been added, the sample should be stirred gently. This helps to ensure that the acetone is evenly distributed throughout the sample and that it has had the chance to dissolve any of the desired product.
To learn more about organic
https://brainly.com/question/26556885
#SPJ1