Two identical projectiles are fired at the same time. Projectile A has a speed of 300m/s and projectile B has a speed of 600m/s. What is the ratio of the Kinetic Energy of projectile B to projectile A?

Answer:

No, you cannot sue the opposing team for emotional trauma resulting from your favorite sports team's loss. Sports are competitive events, and it is expected that one team will win and the other will lose. It is not a legal basis for a lawsuit.

Bending allowance is the amount by which the total run that conduit can cover is reduced because of the extra length required to bend around an obstacle.

When running conduit, bending is necessary to go around obstructions like structural members or corners. In order to avoid the use of too many fittings and to make installation faster and more efficient, it is best to avoid angles less than 30 degrees.
When measuring conduit length, it is important to include the bending allowance. The length of the conduit required can be calculated using the following formula:
Bending allowance = (Conduit diameter x bending angle) x 0.0175
Where,
Bending allowance is the additional length of the conduit needed to make the bend.
Conduit diameter is the diameter of the conduit being used.
Bending angle is the angle of the bend being made.
0.0175 is the constant factor used in this calculation.
For example, suppose we have to bend a 1.5-inch diameter conduit around a corner with a 45-degree angle. The bending allowance for this conduit would be:
Bending allowance = (1.5 x 45) x 0.0175
Bending allowance = 1.4 inches
So, when measuring the length of the conduit required for this bend, 1.4 inches should be added to the length of the conduit required to make up for the bending allowance.

The amount by which the total run that conduit can cover is reduced because of the extra length required to bend around an obstacle is called the bending allowance.

For similar question on Bending

https://brainly.com/question/16107975

#SPJ11

Question:-

___ is the amount by which the total run that conduit can cover is reduced because of the extra length required to bend around an obstacle.

The mass of the lifted object, given the height the heavy load was elevated to and average power is 1, 013.85 kg.

To calculate the mass of the lifted object, we can use the work-energy principle, which states that the work done on an object is equal to its change in gravitational potential energy.

Calculate the work done by the lifter:

Power (P) = 1.2 kW = 1200 W (converting from kilowatts to watts)

Time (t) = 25 seconds

Work (W) = Power × Time = 1200 W × 25 s = 30,000 J (joules)

Calculate the change in gravitational potential energy:

Height (h) = 12 in = 12 × 0.0254 m = 0.3048 m (converting from inches to meters)

Gravitational acceleration (g) = 9.81 m/s²

Solve for mass (m):

Since the work done is equal to the change in gravitational potential energy, we have:

30,000 J = m × 9.81 m/s² × 0.3048 m

Now, we can solve for the mass:

m = 30,000 J / (9.81 m/s² × 0.3048 m) = 1, 013.85 kg

Find out more on mass at https://brainly.com/question/17218159

#SPJ1

It is no longer legal to enslave people, but it took violence and significant legislation to secure legal rights, while access to voting rights remains a challenge.

The term "significant" can have different meanings depending on the context. In general, it implies that something is important, meaningful, or has a noteworthy impact or effect.

In the context of statistics, the term "significant" often refers to statistical significance, which is a measure of whether an observed effect or result is likely to be real and not just due to chance. A result is said to be statistically significant if the probability of obtaining that result by chance alone is very low, usually below a  threshold of 5% or 1%.

In scientific research, a finding or result is considered significant if it has practical implications or contributes to the understanding of a particular phenomenon or field of study. It may also be significant if it challenges existing theories or beliefs and leads to new insights or discoveries.

To know more about significant visit :

https://brainly.com/question/28073266

#SPJ1

Answer:

Explanation:

Density is a measure of how much mass is contained in a given volume. It is the amount of matter (mass) in a given space (volume). Density is usually expressed in units of mass per unit of volume, such as kilograms per cubic meter (kg/m³) or grams per milliliter (g/mL).

Volume is the amount of space occupied by an object or substance. It is the measurement of the three-dimensional space occupied by an object, substance, or material. Volume can be measured in different units, such as liters (L), cubic meters (m³), or cubic feet (ft³), depending on the scale of the object being measured.

The equation to calculate the approximate volume of Mercury (or any sphere) is:

V = (4/3)πr^3

Where V is the volume, π (pi) is a mathematical constant approximately equal to 3.14159, and r is the radius of the sphere.

Therefore, to calculate the approximate volume of Mercury, we can use the equation:

V = (4/3)π(1516)^3

In most mechanics problems the gravitational field is assumed to be uniform. The center of gravity is then in exactly the same position as the center of mass. The terms center of gravity and center of mass tend to often be used interchangeably since they are often at the same location

The most effective way to validate a new personality questionnaire is to use a concurrent validity test, a predictive validity test, or an incremental validity test.

The most effective way for a research team to test the validity of their new personality questionnaire is to use a concurrent validity test. This involves administering both the new questionnaire and a well-established questionnaire to the same group of people. The results of the two questionnaires can then be compared to determine the accuracy of the new questionnaire. This method helps researchers identify any discrepancies in the responses to the two questionnaires, providing a measure of the accuracy of the new questionnaire. Another approach to validating the new questionnaire is to use a predictive validity test. This involves administering the new questionnaire to one group of people and then having them complete a task or other measure of personality. The results of the task or measure can then be compared to the responses from the questionnaire, providing a measure of how accurately the questionnaire predicted the responses.

To learn more about Validity :

https://brainly.com/question/23286128

#SPJ11

A Bicycle With 0.80 M Diameter Tires Is Coasting On A Level Road At 5.6 M/S. A Small Blue Dot Has Been Painted On The Tread Of The Rear Tire.The angular velocity of the tires is 14 rad/s.

When a bicycle is coasting on a flat road at 5.6 m/s and has 0.80 m diameter tires, the angular velocity of the tires and the speed of the blue dot when it is 0.80 m above the road are both determined. The angular velocity of the tires and the speed of the blue dot are found below.

At any point, the speed of a point on a tire that is a height h above the ground is given by the following equation:

v = v₀ + ωr

where

v₀ is the initial velocity

ω is the angular velocity

r is the distance between the point on the tire and the center of rotation.

The point on the tire where the blue dot is painted is 0.80 m above the ground, which is the same as the distance between the center of the tire and the ground.

The radius of the tire is half of the diameter, which is 0.80 m divided by 2 or 0.40

m.ω = v/rω = 5.6 m/s / 0.40 mω = 14 rad/s

The point on the tire that is 0.80 m above the ground has a velocity of:

v = v₀ + ωrv₀ = 0 because the tire is not moving at a height of 0.80

m.v = ωr = 14 rad/s × 0.40 m = 5.6 m/s

The speed of the blue dot is 5.6 m/s.

v = ωrv = 5.6 m/sr = 0.40 mω = v/rω = 5.6 m/s / 0.40 mω = 14 rad/s

for such more question on angular velocity

https://brainly.com/question/6860269

#SPJ11

Answer:

Explanation:

We can use the equation for free fall motion to solve this problem:

h = (1/2)gt^2

where:

h = height from which the body started to fall (what we want to find)

g = acceleration due to gravity (9.8 m/s^2)

t = time taken to fall 10 meters (0.2 s)

First, we need to find the velocity of the body when it passes the lower point. Since the body is freely falling, it will have the same velocity as an object thrown vertically downward from rest at the height from which it started to fall (h). We can use the equation for final velocity in free fall to find this velocity:

vf^2 = vi^2 + 2gh

where:

vf = final velocity (which is the velocity when the body passes the lower point)

vi = initial velocity (which is zero)

g = acceleration due to gravity (9.8 m/s^2)

h = height from which the body started to fall (what we want to find)

Rearranging the equation and substituting the known values, we get:

vf = sqrt(2gh)

vf = sqrt(2 × 9.8 m/s^2 × h)

vf = sqrt(19.6h) m/s

Now we can use this velocity to find the time taken by the body to travel the 10-meter distance between the two points:

vf = gt

t = vf/g = sqrt(19.6h)/9.8 s

Finally, we can substitute this value of t into the equation for height and solve for h:

h = (1/2)gt^2 = (1/2) × 9.8 m/s^2 × (sqrt(19.6h)/9.8 s)^2

h = (1/2) × h

h = 5 meters

Therefore, the body started to fall from a height of 5 meters above the higher point.

The horizontal force that was exerted by the wind on the mast based on the power is 67.3KN.

Blade Stan, d = 75m

Radius of Blade, r = 75m

wind velocity, V = 30 km/h V = 8.333 m/s

Turbine Generator efficiency or Power Co-efficient ((p) = 32% 0.32.

Flow rate across the turbine (in) = 125X8.333X X (75) 2 m

= 46017.583 kg/s

Air Exit velocity, Ve = V×√1 - Nterbine

Ve = 8.333 x √1 1- 0.32

Ve = 6.872 mls

Horizental force in x-direction (F); -

Fx = m (ve-v)

Fx = 46017-583X(6-872-8.333) = 67265.381 N

The Horizental force Extered on the Supporting mast F = -F F= 67.2654 KN

Learn more about power on:

https://brainly.com/question/2248465

#SPJ1

Determine the horizontal force that was exerted by the wind on the mast base

Refer to the attached image.

Overall: Parts (a) and (c) need to be corrected.

From the calculation that have been done it is clear that the weight of the button is  0.98 N.

Weight is the force exerted on an object due to gravity. It is a measure of the amount of gravitational force that is acting on an object, and is determined by the mass of the object and the strength of the gravitational field it is in.

From;

W = mg

W = 0.1 kg * 9.8 m/s^2

W = 0.98 N

Weight is commonly measured in units of force, such as pounds or newtons, and is different from mass, which is a measure of the amount of matter in an object and is typically measured in units of kilograms or grams.

Learn more about weight:https://brainly.com/question/10069252

#SPJ1

Missing parts;

the push button of a faucet can be considered a spring mass damper system. the mass of the button is 0.1 kg. calculate the following: weight of the button

At the position shown in the diagram, the rock's acceleration is pointing towards the centre of the circle. This means that the acceleration is directed downwards, in the opposite direction of gravity. The acceleration is a vector, so it can be represented as "vertical", pointing directly downwards.

At the position shown, the direction of the rock's acceleration is downwards. This is because the force acting on the rock is gravity, which is pulling the rock towards the center of the circle. Thus, the direction of the acceleration is always towards the center of the circle in vertical circles.

The motion of the rock is a combination of uniform circular motion and free fall. When the rock is at the topmost point of the circle, its velocity is zero, and it begins to fall under the influence of gravity. At this point, the acceleration of the rock is solely due to gravity and is equal to g (acceleration due to gravity).As the rock moves down the circle, the force of gravity and the tension force acting on the string combine to provide a net force acting towards the center of the circle.

This provides the centripetal acceleration that keeps the rock moving in a circle. At the bottommost point of the circle, the tension force in the string becomes zero, and the acceleration of the rock is solely due to gravity, but this time it acts in the direction of the tension force (i.e., towards the center of the circle).

For more such questions on gravity

https://brainly.com/question/1752905

#SPJ11

c) electrostatic force is not a force that controls the wind.

What is an electrostatic force?

Electrostatic force is a type of force that exists between particles with electric charges. It is also known as Coulombic force and can be attractive or repulsive depending on the sign of the charges. The strength of the electrostatic force is directly proportional to the magnitude of the charges and inversely proportional to the distance between them.

What is magnitude?

Magnitude refers to the size or amount of something, typically measured in numerical or quantitative terms. It can be used to describe various physical properties such as force, velocity, acceleration, or electric charge, among others. In physics, magnitude is often represented by a scalar quantity, which has only magnitude and no direction, as opposed to a vector quantity, which has both magnitude and direction.

To know more about electrostatic force, visit:

https://brainly.com/question/9774180

#SPJ1

Complete question is : electrostatic force is not a force that controls the wind.

To find:-

Answer:-

We are here given that two long current carrying wires are having same current. We need to find out the magnetic field at the centre between the wires .

We know that for a point between two ends of a wire , magnetic field is given by,

[tex]\implies B =\dfrac{\mu_0}{4\pi}\dfrac{2i}{d}\\[/tex]

where ,

Now since magnetic field is a vector quantity we need to find out the direction of the field . We can do so by using Right Hand thumb rule .

Right hand thumb rule :-

Hold the wire , in your hand with thumbs towards the direction of the current, then the curling of the fingers would give you the direction of the magnetic field.

For wire AB :-

The direction comes to be down the page .

For wire CD :-

The direction comes to be down the page .

Calculating net magnetic field:-

The net magnetic field will be the sum of both the fields .

[tex]\implies B_{net}=\dfrac{\mu_0}{4\pi}\dfrac{2i}{d}+\dfrac{\mu_0}{4\pi}\dfrac{2i}{d} \\[/tex]

[tex]\implies B_{net}=\dfrac{\mu_0}{4\pi}\dfrac{4i}{d}\\[/tex]

[tex]\implies \underline{\underline{\green{ B_{net}=\dfrac{\mu_0i}{ \pi d}}}}\\[/tex]

The direction is down the page .

and we are done!

Greenhouse gases, Albedo , Orbital variations ,Solar radiation and Volcanic activity these are the factors that affect the temperature of the earth.

There are many factors that affect the temperature of the Earth, including the following:

Greenhouse gases: Certain gases, such as carbon dioxide, methane, and water vapor, trap heat in the Earth's atmosphere and cause the planet to warm up. As greenhouse gas emissions increase due to human activity, such as burning fossil fuels, the Earth's temperature is expected to continue to rise.

Albedo: This is a measure of how much light the Earth reflects back into space. When the Earth's surface is covered in snow or ice, it has a high albedo and reflects more light. When the Earth's surface is covered in dark vegetation or water, it has a low albedo and absorbs more light, which causes it to warm up. Changes in land use, such as deforestation, can also affect the Earth's albedo.

Orbital variations: The Earth's orbit around the sun changes over time due to gravitational interactions with other planets. These variations can affect the amount of sunlight that reaches different parts of the Earth and cause climate patterns to shift. For example, changes in the tilt of the Earth's axis can lead to changes in the seasons.

Solar radiation: The amount of energy the Earth receives from the sun varies over time due to changes in the sun's output and the Earth's position in its orbit. This can affect the Earth's climate, especially over long periods of time. For example, changes in solar radiation are thought to have contributed to past ice ages.

Volcanic activity: When a volcano erupts, it releases large amounts of gases and particles into the atmosphere. This can cause the Earth's temperature to drop temporarily by blocking sunlight. However, over longer periods of time, volcanic activity can also release greenhouse gases and cause the Earth to warm up.

for such more question on  temperature

https://brainly.com/question/26866637

#SPJ11

The largest force exerted on an object by electromagnetic radiation is       d) The radiation is reflected back along its incident path.

The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR).  It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all a component of the electromagnetic spectrum. 

Electromagnetic waves, which are synchronised oscillations of the electric and magnetic fields, are the traditional form of electromagnetic radiation. The electromagnetic spectrum is created at various wavelengths depending on the oscillation frequency. Electromagnetic waves move at the speed of light, in a vacuum. The oscillations of the two fields create a transverse wave in homogeneous, isotropic media when they are perpendicular to each other, perpendicular to the direction of energy and wave propagation, and perpendicular to each other.

The range of electromagnetic radiation's frequencies, along with their corresponding wavelengths and photon energies, is known as the electromagnetic spectrum.

The electromagnetic spectrum includes electromagnetic waves with frequencies between one hertz and above 10²⁵ hertz, or wavelengths between thousands of kilometres and a small portion of the size of an atomic nucleus. The electromagnetic waves that are contained within each of these bands have different names; starting at the low-frequency (long wavelength) end of the spectrum, these are radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays. This frequency range is divided into separate bands.

To know more about photon, visit:

https://brainly.com/question/20912241

#SPJ1

To determine the acceleration of each block, we need to apply the laws of motion and analyze the forces acting on each block.

the only force acting on it is the applied force P. The force of friction acting on Block A is equal to µN, where N is the normal force. Since Block B is resting on top of Block A, the normal force acting on Block A is equal to the weight of Block B plus the weight of Block A, which is (2m)g. Therefore, the force of friction acting on Block A is 0.25(2m)g.

F = ma, we can write the equation of motion for Block A as P - 0.25(2m)g = (2m + m)a. Solving for a, we get a = (P - 0.25(2m)g)/(3m).

the force acting on it is the tension in the cable CD, which is equal to the weight of Block B plus the weight of Block A, plus the force of friction acting between Block A and Block B. Using the same method as above, we can calculate the force of friction as 0.25mg. Therefore, the equation of motion for Block B can be written as T - 0.25mg = ma, where T is the tension in the cable.

their accelerations must be the same. Therefore, we can set the two equations equal to each other and solve for the tension T, which is equal to 0.75mg + P.

we can use the tension T to determine the acceleration of Blocks C and D, which are attached to Block B by the cables. Since the tension in the cables is the same throughout, the acceleration of Blocks C and D is also equal to a.

To know more about accelerations , visit :

https://brainly.com/question/12550364

#SPJ1

The acceleration of block A is 17.55 m/s^2

Calculation for the given question is as following :-

Since block B is being held in place by cable CD, it is not moving and therefore has no acceleration. Thus, we only need to consider the motion of block A.

To solve the problem, we can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:

F_net = ma

where F_net is the net force acting on the object, m is the mass of the object, and a is its acceleration.

First, we need to calculate the net force acting on block A. There are two forces acting on block A: the applied force P and the force of friction f. The force of friction is given by:

f = mu*N

where mu is the coefficient of kinetic friction and N is the normal force acting on the block. The normal force is equal in magnitude to the weight of the block, which is:

N = mg

where g is the acceleration due to gravity. Thus, the force of friction is:

f = mu*mg

Substituting the given values, we get:

f = 0.2559.81 = 12.27 N

The net force acting on block A is therefore:

F_net = P - f

Substituting the given value of P and the calculated value of f, we get:

F_net = 100 - 12.27 = 87.73 N

Finally, we can calculate the acceleration of block A using Newton's second law:

a = F_net/m

Substituting the given value of m and the calculated value of F_net, we get:

a = 87.73/5 = 17.55 m/s^2

Therefore, the acceleration of block A is 17.55 m/s^2.

To know more about force visit :-

https://brainly.com/question/12785175

#SPJ1

The volume of B can be calculated as follows: Volume of B = Mass of B / Density of B

When converting from mass of A to liters of B in a stoichiometry problem, the following steps must be followed:

Step 1: Write a balanced chemical equation representing the reaction between A and B.

Step 2: Calculate the molar mass of A and B.

Step 3: Convert the given mass of A to moles of A using the molar mass of A.

Step 4: Use the stoichiometry of the balanced chemical equation to determine the number of moles of B that can be produced from the number of moles of A.

Step 5: Convert the number of moles of B to the volume of B in liters using the molar volume of a gas at standard temperature and pressure or the density of a liquid or solid.

Step 1: Write a balanced chemical equation representing the reaction between A and B. The balanced chemical equation can be written as:

`nA + mB → xC + yD`Step

Step 2: Calculate the molar mass of A and B. Molar mass is the mass of one mole of a substance. It is expressed in grams per mole. Therefore, the molar mass of A and B can be calculated using their atomic masses.

Step 3: Convert the given mass of A to moles of A using the molar mass of A.

Moles of A = Mass of A / Molar mass of A

Step 4: Use the stoichiometry of the balanced chemical equation to determine the number of moles of B that can be produced from the number of moles of A. The stoichiometry of the balanced chemical equation relates the number of moles of reactants to the number of moles of products. The stoichiometric coefficient of A and B indicates the number of moles of each that are required to react. Therefore, the number of moles of B produced can be calculated as follows:

Number of moles of B = Number of moles of A x Stoichiometric coefficient of B/Stoichiometric coefficient of A

Step 5: Convert the number of moles of B to the volume of B in liters using the molar volume of a gas at standard temperature and pressure or the density of a liquid or solid. The molar volume of a gas at standard temperature and pressure (STP) is 22.4 L/mol. Therefore, the volume of B can be calculated as follows:

Volume of B = Number of moles of B x 22.4 L/mol

If B is a liquid or solid, its density can be used to convert the number of moles to volume.

The density of B is given in units of g/mL or g/cm³.

Therefore, the volume of B can be calculated as follows:

Volume of B = Mass of B / Density of B

For more such questions on stoichiometry , Visit:

https://brainly.com/question/14935523

#SPJ11

Answer:

An object moves in a straight line along a horizontal surface.

Answer:

A and D

Explanation:

A:the kinetic energy does decrease due to the decrement of the velocity i.e the slope is negative velocity.

it is true

B.the change of moment is not zero cause there is difference between initial and final velocity

it is false

c.also work done is not zero you can chaekc it using the formula 1/2m (vf -vi)² and choice

it is flase

D. the impulse is the applied force per time Which is mass of the object multiplied by it's the change in momentum. it is true

For the event to occur, Aircraft B will have travelled a distance of 980 NM.

Since Aircraft A is flying East, we can assume that the positive direction is to the East and negative direction is to the West. Let's assume that the position of Aircraft A is x and position of Aircraft B is x + 210 NM.

Let t be the time it takes for Aircraft A to catch up with Aircraft B. At that moment, both aircraft will be at the same position, so:

distance traveled by Aircraft A = distance traveled by Aircraft B

Ground speed x time = Ground speed x time + 210

Using the given ground speeds, we can set up the equation as:

340t = 280t + 210

60t = 210

t = 3.5 hours

Therefore, Aircraft B will have traveled a distance of:

distance = ground speed x time

distance = 280 kt x 3.5 hr

distance = 980 NM

So, Aircraft B will have traveled 980 NM when Aircraft A catches up with it at Point X.

Find out more on Aircraft here: https://brainly.com/question/31362675

#SPJ1

Answer: Movement of Water. Surface movement includes rivers, streams, creeks, lakes, ponds, and human-made "flood" control.

Water bodies—such as rivers and streams—flow downhill until they flow into larger bodies of water—such as lakes and oceans. Some rivers and streams can flow over large surface areas; for example, the Amazon River flows across 4,345 miles of the continent of South America.

The answer is that the total work done by the forces acting on the crate is 272.8 J.

Using the expression for work done below, we have

W = mg∆h = (70 N)(9.81 m/s2)(3.8 m)sin(45°) = 261.8 J

The work done by the frictional force is:

W = Ff∆s = (70 N)(0.05)(3.8 m) = 11.0 J

Therefore, the total work done by the forces acting on the crate is 261.8 J + 11.0 J = 272.8 J.

Learn more about work done here:

https://brainly.com/question/25573309

#SPJ1

The direction in which the wire could be moved to produce the maximum potential difference across it ends, r and s at its ends R and S by moving left to right.

Potential difference, also known as voltage, is a measure of the difference in electric potential energy between two points in an electrical circuit. It is defined as the amount of work per unit of charge required to move an electric charge from one point to another point in an electric field.

In simple terms, potential difference refers to the difference in electric potential between two points in an electrical circuit. The greater the potential difference between two points, the more work is required to move electric charges between those points. This is because the electric charges experience an electric force that pushes them from a region of high potential energy to a region of low potential energy.

To learn more about Potential differencevisit here:

brainly.com/question/12198573

#SPJ4

The total inductance of the circuit is approximately 0.559 H.

When inductors are connected in parallel, the total inductance is given by the formula:

1/L = 1/L1 + 1/L2 + 1/L3

where  L1, L2, and L3 are the inductances of the individual inductors.

Substituting the given values, we get:

1/L = 1/2.5 + 1/1.8 + 1/1.2

Simplifying the equation, we get:

1/L = 0.4 + 0.5556 + 0.8333

1/L = 1.7889

Taking the reciprocal of both sides, we get:

L = 1/1.7889

L ≈ 0.559 H

Therefore, the total inductance of the circuit is approximately 0.559 H.

What is an inductance ?

Inductance is a property of an electrical circuit or component, such as a coil or inductor, that opposes any change in the electric current flowing through it. It is a measure of the amount of magnetic energy that is stored in a circuit when a current is passed through it.

To know more about inductance, visit:

https://brainly.com/question/29981117

#SPJ1

The average force exerted on the putty by the surface is 0 N this means that the putty experiences no net force and does not accelerate during the 0.30 s it takes to come to rest.

To answer this problem, we may apply the average force equation, which states that average force equals momentum change divided by the period during which the force occurs.

Initially, we must determine the putty's starting momentum. We may employ the momentum equation, which asserts that momentum equals mass times velocity. Because the putty is dropped from rest, its initial velocity is zero, as is its initial momentum.

The ultimate momentum of the putty must then be determined. The putty's final velocity is also zero since it comes to rest. As a result, the putty's ultimate momentum is similarly zero.

Finally, we can substitute the values we found into the equation for average force:

Average force = change in momentum/time interval

= 0 / 0.30

= 0 N

Learn more about the average force at

https://brainly.com/question/29781083

#SPJ4

Answer:

Explanation:

The correct option that describes a different evolutionary stage of a star like the sun is:

D) It becomes a white dwarf after exploding as a supernova

This is because a star like the sun does not have enough mass to undergo a supernova explosion. After it has exhausted all the fuel in its core, it will evolve into a red giant and then a planetary nebula, leaving behind a small, hot, dense remnant known as a white dwarf. Supernovae occur in much more massive stars that have cores that can collapse to form a neutron star or black hole.

Answer: 10 kg

Explanation:

Using dimensional analysis, we can find the unit of mass in the given system:

Force (F) = mass (m) × acceleration (a)

In the given system, the unit of force is 100 N, which can be written as:

100 N = (100 kg · m/s²) × (10 m/s²)

Thus, we can see that the unit of force is equivalent to 100 kg·m/s².

Now, we can rearrange the equation to solve for mass (m):

m = F/a

Substituting the units:

m = (100 kg·m/s²) / (10 m/s²)

m = 10 kg

Therefore, the unit of mass in the given system is 10 kg.