Answer:
See the answers below.
Explanation:
The total power of the circuit is equal to the sum of the powers of each lamp.
[tex]P=60+100\\P=160 [W][/tex]
Now we have a voltage source equal to 240 [V], so by means of the following equation we can find the current circulating in the circuit.
[tex]P=V*I[/tex]
where:
P = power [W]
V = voltage [V]
I = current [amp]
[tex]I = P/V\\I=160/240\\I=0.67 [amp][/tex]
So this is the answer for c) I = 0.67 [amp]
We know that the voltage of each lamp is 240 [V]. Therefore using ohm's law which is equal to the product of resistance by current we can find the voltage of each lamp.
a)
[tex]V=I*R[/tex]
where:
V = voltage [V]
I = current [amp]
R = resistance [ohms]
Therefore we replace this equation in the first to have the current as a function of the resistance and not the voltage.
[tex]P=V*I\\and\\V = I*R\\P = (I*R)*I\\P=I^{2}*R[/tex]
[tex]60 = (0.67)^{2}*R\\R_{60}=133.66[ohm] \\and\\100=(0.67)^{2} *R\\R_{100}=100/(0.66^{2} )\\R_{100}=225 [ohm][/tex]
b)
The effective resistance of a series circuit is equal to the sum of the resistors connected in series.
[tex]R = 133.66 + 225\\R = 358.67 [ohms][/tex]
If the same total travel at the speed of 0.05 m/s for 40 seconds, how far would it have gone?
Answer:
Would've traveled 2 miles.
Explanation:
a 5.00 kg plane is speeding up on the ground with an applied force of 706 N. If the net force is 450 N, what would be the force due to air resistance
Answer:
The force due to air resistance is 256 N.
Explanation:
Given;
mass of the plane, m = 5 kg
applied force on the plane, Fa = 706 N
the net force on the plane, ∑F= 450 N
Let the force due to air resistance = Fr
The net force on the plane is given as;
Net force = applied force - force due to air resistance
∑F = Fa - Fr
Fr = Fa - ∑F
Fr = 706 - 450
Fr = 256 N.
Therefore, the force due to air resistance is 256 N.
what is the uses of space weather data?
Answer:
Space Weather Data
They are used to produce forecasts, such as the monthly sunspot number forecast. Most notably, sunspot numbers represent one of the longest continuous climate records available. The data give scientists the means to make many forecasts and issue space weather advisories and alerts.
Explanation:
If clouds were made of cotton-candy what is rain
Answer:
If clouds were made of cotton candy, I think rain would be soda.
Or liquified sugar.
:)
Answer:
Liquid Sugar
Explanation:
For an example, let's look at normal clouds. They're made of water vapor, and when they rain it's because the water vapor condenses and forms a droplet heavy enough that it falls out of the sky. In both sides of the equation, they're still made out of water. So, logically, cotton candy is made almost 100% with sugar, right? All that's happened is the sugar is heated and liquified and pushed through very small holes until they cluster together and form the fluffy treat you know today. Back to the leading question, though: "If clouds were made of cotton-candy, what is rain?". Rain is the liquid form of clouds (gas), and cotton candy is the (solid) form of itself. So in order for it to rain, it needs to liquefy itself. When melted at 367°F, sugar becomes a liquid, so in that case THAT is what cotton candy would rain if it were a cloud.
≧◡≦
Mocha here! If this answer helped you, please consider giving it brainliest because I would appreciate it greatly. Have a wonderful day!
State ten reasons why students in Uganda need to study physics. Use exampes of the possible technological advancements which can be made using the knowledge of physics
Epithelial tissues often form the lining of organs and secrete substances such as digestive enzymes.
True
False
Answer:
ohh yes. answer is true
how much force would be needed to move a 100 kg object at the acceleration rate of 2 m/s
Answer: 200 N
Hope this helps! :)
will you help me please
Answer: True
Explanation: It's true because the definition of a Command economy states that it's an economy in which production, investment, prices, and incomes are determined CENTERALLY by a GOVERNMENT.PLEASEEE HELPPP!!!!
A mover slides a refrigerator weighing 650 N at a constant velocity across the floor
a distance of 8.1 m. The force of friction between the refrigerator and the floor is
230 N. How much work has been performed by the mover on the refrigerator?
Answer: The work is 1863 N*m
Explanation:
We can define work as:
W = F*d
Where F is the force that the mover needs to apply to the refrigerator, and d is the distance that the refrigerator is moved.
To move the refrigerator, the minimal force that the mover needs to do is exactly the friction force (In this case, the refrigerator will move with constant speed).
Then we will have:
F = 230 N
and the distance is 8.1 meters, then the work will be:
W = 230N*8.1 m = 1863 N*m
You will get the most accurate resting heart rate if you take your pulse for ___ consecutive mornings and average the number
A: 3
B: 4
C: 5
The development of current atomic theory has changed over time as result of different proposed models and experiments. Place these in chronological order.
Answer:
b????
Explanation:
hope its right
The development of the current atomic theory has changed over time as a result of different proposed models and experiments as per the chronological order of the development of the atomic models, the correct answer is option B
What are atomic models?There are some models that are used to explain the arrangements of subatomic particles inside the atom based on the atomic theory of atom are known as the atomic models.
As given in the problem statement The development of the current atomic theory has changed over time as a result of different proposed models and experiments. The chronological order of the atomic model is given as follows
John Dalton's atomic model
The Plum Pudding Model, developed by J.J. Thomson,
Using the alpha particle bombardment experiment on a thin sheet of gold, Rutherford's model
Niels Bohr's model explained the revolving nature of the electrons in the different shells around the nucleus of the atom.
Erwin Schrodinger's model explains the arrangement of the subatomic particles as the electron Cloud Model
Thus, the correct answer is option B.
Learn more about the atomic models here,
brainly.com/question/9145431
#SPJ2
The external stimulus (what causes the stress) NEED HELP ASAP
Answer:
Some examples of external stressors include:
Major life changes. These changes can be positive, such as a new marriage, a planned pregnancy, a promotion or a new house. ...
Environment. The input from the world around us can be a source of stress. ...
Unpredictable events.
Workplace.
Social.
Explanation:
With what force will a car hit a tree if the car has a mass of 3,000 kg and an acceleration of 2m/s squared
Answer:
6000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 3000 × 2
We have the final answer as
6000 NHope this helps you
Answer:
6000n
Explanation:
The photograph shows matter going through a physical change. Which characteristic of the matter changes?
A. shape.
B. shininess.
C. state.
D. type of atoms
Answer:
Possibly shape.
Explanation:
Because it is ripped in half. As you guys and the questioner can see that there is a wiggly strip down the middle. That also cause of a shape change.
I really hope my answer is right ^_^
The characteristic of matter which is undergoing change in the picture is it's shape as it is being teared apart.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter possesses both particle and wave characteristics.Phase is a form of matter having uniform composition as well as physical properties.
Learn more about matter,here:
https://brainly.com/question/12972782
#SPJ2
which number is larger value : 5.6*10^23 or 8.9*10^6
Need Help
Answer:
5.6*10^23. if 10^n is greater, that means its the larger value. hope dis helps
Explanation:
what is the total magnification of a microscope with an eyepiece magnification of 10x and an objective lens magnification of 50x quizziz
Answer:
500x
Explanation:
A microscope had an eyepiece magnification of 10x
The objective lens magnification is 50x
Therefore the total magnification can be calculated as follows
= 10 × 50
= 500x
Hence the total Magnificattion is 500x
Who was the first person to study polarization of light?
-Huygens
-Newton
-Galileo
-Copernicus
Answer:
HUYGENS, CAN I S HAVE BRAINLIST?
Answer:
None
Explanation:
It is erasmus bartholinus
plzzzzzzzzz help me will mark u brainest
Answer:
B
Explanation:
acceleration = change in speed / change in time
for 1, speed increases over time, so positive acceleration
for 3, speed decreases over time, so negative acceleration (or deceleration)
A box has a momentum of
38.0 kg*m/s to the right. A 88.3 N
force pushes it to the right for 0.338
S. What is the final momentum of
the box?
Answer:
67.9 kg*m/s
Explanation:
Pi = 38 kgm/s
F = 88.3N and ∆t = 0.338s
Final momentum Pf = Pi + F∆t = 38 + (88.3)(0.338) = 38 + 29.8454
=) Pf = 67.8454 kgm/s = 67.85kg*m/s
Your answer is 67.9kg*m/s with three significant figures
hope this helps your troubles!
calculate the kinetic energy of running kitten that has a mass of 4 kg and velocities of 2 m/s
1. A race starts out at rest and accelerates to 30m/s over a period of 10s. What is the acceleration of the car?
O 3.0 m/s
O 3.0 m.s2
O 2.0 m/s2
O 5.0 m/s2
Answer:3.0m/s
Explanation:
Speed, Velocity, and Acceleration Escape Room.
Enter the correct 4 digit code (no spaces
Answer:1342
Explanation:
A 50 kg circus worker stands on a merry go round platform. If the worker's acceleration is 2.5 m/s2, what is her centripetal force?
F = ma
= 50kg × 2.5 m/s²
= 125 N
Answer : 125N
Explanation :
F = Force (N)
m = mass (kg)
a = acceleration (m/s²)
m=20kg F=10N d=25m
Work done=?
w=f×d
w=10N×25m
w=250Nm
A ball of mass 0.12kg is hit by a tennis player. The velocity of the ball changes from 0m/ s to 5.0m/s in 0.60s. What is the average resultant force acting on the ball while it is being hit?
A 1.0N B 2.5N C 3.6N D 8.3N
(Please add explanation)
Answer:
A. 1.0NExplanation:
According to Newton's second law
F = ma
m is the mass = 0.12kg
a is the acceleration = v-u/t
a = 5-0/0.6
a = 5/0.6
a = 8.333m/s²
Get the force
F = 0.12 * 8.333
F = 1.0N
Hence the average resultant force acting on the ball while it is being hit is 1.0N
9. A student notices that wearing darker colors in sunlight makes him feel warmer, so he decides to conduct an experiment. He takes five pieces of different
colored cloth and wraps
each one around a water bottle. He then places all five bottles in direct sunlight and measures the temperature of the water in each bottle an hour later
What is the dependent variable in this experiment?
O the time he leaves it in the sunlight
O the amount of water in each bottle
O the color of the cloth
O the temperature of the water
Answer: 4
Explanation:
The dependent variable is the temperature of the water.
The temperature of rock located 1,000 kilometers below the Earth's surface is about a. 200 C b.2,100 C c.2,800 C d.3,200 C
The temperature of the rock located at 1,000 km below the earth' surface has been 3200 degree Celsius. Thus, option D is correct.
The temperature at the earth's surface has been found to be nearly 0 degree Celsius. According to the geology of the earth, the temperature has been increased to 1500 degree Celsius by digging 100 km below the earth surface.
Thus, the temperature at 100 km from earth surface has been 1500 degree Celsius.
On moving down from 100 km, there has been a rise in temperature, and at the mouth of the mantle at 1000 km, the temperature has been approximately 3500 degree Celsius.
Thus the temperature that has been near about 3500 degree Celsius is 3200 degree Celsius. Thus, the temperature of the rock at 1000 km below the earth surface has been 3200 degree Celsius. Thus, option D is correct.
For more information about the temperature of earth, refer to the link:
https://brainly.com/question/893891
(a) As you ride on a Ferris wheel, your apparent weight is different at the top and at the bottom. Explain. (b) Calculate your apparent weight at the top and bottom of a Ferris wheel, given that the radius of the wheel is 7.2 m, it completes one revolution every 28 seconds, and your mass is 55 kg.
Answer:
a. The component of the net force which make up the apparent weight are added to each other at the bottom and subtracted (the centripetal force from the weight) at the top)
b. Apparent weight at the top is approximately 519.06 N
Apparent weight at the bottom is approximately 558.94 N
Explanation:
a. The apparent weight at the top is different from the apparent weight at the bottom of a moving Ferris wheel because of the opposite direction in which the centripetal force acts at the top and the bottom, which are upwards and downwards respectively, while the weight acts downwards constantly
b. The given parameters are
The radius of the Ferris wheel, r = 7.2 m
The period for one complete revolution, t = 28 seconds
The angle covered in one revolution, θ = 2·π radian
The mass of the person riding on the Ferris wheel, the passenger = 55 kg
Therefore, we have;
The angular speed, ω = Δθ/Δt = 2·π/(28)
From which we have;
Centripetal force, [tex]F_c[/tex] = m × ω² × r
Substituting the known values, we have [tex]F_c[/tex] = 55 kg × (2·π/(28 s))² × 7.2 m ≈ 19.94 N
The centripetal force, [tex]F_c[/tex] = 19.94 N always acting outward from the center
Weight = Mass × Acceleration due to gravity
The weight of the passenger = 55 kg × 9.8 m/s² = 539 N
The weight of the passenger = 539 N always acting downwards
At the top of the Ferris wheel the the centripetal force is acting upwards and the weight is acting downwards
Therefore;
The net force, which is the apparent weight of the passenger at the top [tex]F_{NET_{Top}}[/tex] = 539 N - 19.94 N ≈ 519.06 N
Apparent weight at the top ≈ 519.06 N
At the bottom of the Ferris wheel the weight is acting downwards and the centripetal force is also acting downwards
Therefore;
The net force at the bottom, which is the apparent weight of the passenger at the bottom [tex]F_{NET_{bottom}}[/tex] = 539 N + 19.94 N ≈ 558.94 N
Apparent weight at the bottom ≈ 558.94 N.
A parachutist of mass 56.0 kg jumps out of a balloon at a height of 1400 m and lands on the ground with a speed of 5.10 m/s. How much energy was lost to air friction during this jump
Answer:
769,048.28Joules
Explanation:
A parachutist of mass 56.0 kg jumps out of a balloon at a height of 1400 m and lands on the ground with a speed of 5.10 m/s. How much energy was lost to air friction during this bump
The energy lost due to friction is expressed using the formula;
Energy lost = Potential Energy + Kinetic Energy
Energy lost = mgh + 1/2mv²
m is the mass
g is the acceleration due to gravity
h is the height
v is the speed
Substitute the given values into the formula;
Energy lost = 56(9.8)(1400) + 1/2(56)(5.10)²
Energy lost = 768,320 + 728.28
Energy lost = 769,048.28Joules
Hence the amount of energy that was lost to air friction during this jump is 769,048.28Joules
A loudspeaker produces a sound wave of frequency 50hz.
The amplitude of sound wave is increased.
What is heard?
A) a louder sound of higher pitch.
B) a louder sound of the same pitch.
C) a sound of higher pitch but the same loudness.
D) a sound of the same pitch and loudness as before
Answer:
B) a louder sound of the same pitch.
Explanation:
Given that the loudspeaker produces a sound wave of frequency 50hz and the amplitude of the sound wave is increased.
As loudness of the sound depends on the amplitude of the sound while pitch depends on the frequency of the sound.
On increasing the amplitude of the sound there is no effect on the frequency of the sound, so, the loudness of the sound will increase while the pitch remains unchanged.
Therefore, on increasing the amplitude of the soundwave a louder sound of the same pitch is heard.
Hence, option (B) is correct.