A) A 99% confidence interval for the proportion of cell phone owners who do most of their online browsing on their phone is between 15.9% to 18.1%.
B) AS we have used the normal distribution to test and then we have found that we have enough evidence to reject the null hypothesis in favor of the alternative.
C) Test statistic = 2.35.
p -value = 0.009
To answer the first question, we need to find a confidence interval for the proportion. This interval represents a range of values that we are reasonably certain the true population proportion falls within. The 99% confidence interval is calculated by taking the sample proportion (0.17), adding and subtracting a margin of error based on the standard error (0.0085), and then multiplying by the appropriate critical value from the normal distribution (2.58). This gives us a confidence interval of 15.9% to 18.1%.
For the second question, we need to set up our hypotheses. The null hypothesis (H0) is that the true population proportion is equal to 0.15, while the alternative hypothesis (Ha) is that it is greater than 0.15. We will use a one-tailed test with a significance level of 0.05 to determine whether we have enough evidence to reject the null hypothesis in favor of the alternative.
To perform the hypothesis test, we need to calculate a test statistic and a p-value. The test statistic is a measure of how far our sample proportion is from the hypothesized value of 0.15, in terms of standard errors. In this case, the test statistic is (0.17 - 0.15) / 0.0085 = 2.35.
The p-value is the probability of getting a test statistic as extreme as 2.35 or more extreme, assuming the null hypothesis is true. Using a normal distribution table or calculator, we find that the p-value is 0.009.
Since our p-value is less than the significance level of 0.05, we have enough evidence to reject the null hypothesis and conclude that the true population proportion is likely greater than 0.15.
To know more about hypothesis here
https://brainly.com/question/29576929
#SPJ4
If event E and F form the whole sample space, S, Pr(E)=0.7, and Pr(F)=0.5, then pick the correct options from below. Pr(EF) = 0.2 Pr(EIF)=2/5. Pr(En F) = 0.3 Pr(E|F)=3/5 Pr(E' UF') = 0.8 Pr(FE) = 4/7
In summary, the correct options for the probability are "Pr(EF) = 0.2", "Pr(E' UF') = 0.8", and "Pr(FE) = 4/7", while the incorrect options are "Pr(EIF) = 2/5", "Pr(E n F) = 0.3", and "Pr(E|F) = 3/5".
Given that event E and F form the whole sample space, S, and Pr(E)=0.7, and Pr(F)=0.5, we can use the following formulas to calculate the probabilities:
Pr(EF) = Pr(E) + Pr(F) - Pr(EuF) (the inclusion-exclusion principle)
Pr(E'F') = 1 - Pr(EuF) (the complement rule)
Pr(E|F) = Pr(EF) / Pr(F) (Bayes' theorem)
Using these formulas, we can evaluate the options provided:
Pr(EF) = Pr(E) + Pr(F) - Pr(EuF) = 0.7 + 0.5 - 1 = 0.2. Therefore, the option "Pr(EF) = 0.2" is correct.
Pr(EIF) = Pr(E' n F') = 1 - Pr(EuF) = 1 - 0.2 = 0.8. Therefore, the option "Pr(EIF) = 2/5" is incorrect.
Pr(E n F) = Pr(EF) = 0.2. Therefore, the option "Pr(E n F) = 0.3" is incorrect.
Pr(E|F) = Pr(EF) / Pr(F) = 0.2 / 0.5 = 2/5. Therefore, the option "Pr(E|F) = 3/5" is incorrect.
Pr(E' U F') = 1 - Pr(EuF) = 0.8. Therefore, the option "Pr(E' UF') = 0.8" is correct.
Pr(FE) = Pr(EF) / Pr(E) = 0.2 / 0.7 = 4/7. Therefore, the option "Pr(FE) = 4/7" is correct.
To know more about probability,
https://brainly.com/question/30034780
#SPJ11
If p varies jointly as q and r, find p when q = –4 and r = 7.
p = –45 when q = 3 and r = 14
When a variable varies jointly as two other variables, it means that the relationship between the variables can be expressed as a direct proportion.
Mathematically, we can write this as:
p = k * q * r
Where p is the variable that varies jointly, q and r are the other variables, and k is the constant of variation.
To find the value of p, we need to determine the value of the constant of variation, k. We can do this by substituting the given values of q, r, and p into the equation and solving for k.
Using the first set of values: q = -4, r = 7, and p = -45:
-45 = k * (-4) * 7
Simplifying further:
-45 = -28k
Dividing both sides by -28:
k = -45 / -28 = 45/28
Now that we have the value of k, we can use it to find p when q = 3 and r = 14.
p = (45/28) * 3 * 14
Simplifying:
p = 45 * 3 * 2
p = 270
when q = 3 and r = 14, p = 270.
To know more about equation visit:
brainly.com/question/29538993
#SPJ11
For the system of differential equations x'(t) = -9/5 x + 5/3 y + 2xy y' (t) = - 18/5 x + 20/3 y - xy the critical point (x_0, y_0) with x_0 > 0, y_0 >, y_0 > is x_0 = 2/3 y_0 = 2/5 Change variables in the system by letting x(t) = x_0 + u(t), y(t) = y_o + v(t). The system for u, v is Use u and v for the two functions, rather than u(t) and v(t) For the n, v system, the Jacobean matrix at the origin is A = -1 3 -4 6 You should note that this matrix is the same as J(x_0, y_0) from the previous problem.
The system of differential equations after the change of variables is given by u'(t) = -3/5 u + 2/3 v + (4/9)x_0v + 4/15 u^2 + 4/15 uv and v'(t) = -4v + 6u + (8/3)x_0u - (2/3)y_0 - 2uv, with the Jacobian matrix A = [-1, 3; -4, 6] at the origin.
How to find Jacobian matrix?The given system of differential equations:
x'(t) = -9/5 x + 5/3 y + 2xy
y'(t) = -18/5 x + 20/3 y - xy
Critical point:
x_0 = 2/3, y_0 = 2/5
New variables:
x(t) = x_0 + u
y(t) = y_0 + v
New system of differential equations in terms of u and v:
u'(t) = -3/5 u + 2/3 v + (4/9)x_0v + 4/15 u^2 + 4/15 uv
v'(t) = -4v + 6u + (8/3)x_0u - (2/3)y_0 - 2uv
Jacobian matrix at the origin:
A = [-1, 3; -4, 6]
Learn more about differential equations
brainly.com/question/31583235
#SPJ11
QUESTION 6
A professor has 125 students in her classes at the beginning of the semester, but 16 students withdraw from her
classes before Test #3. If she has 1 classes in total and each class has an equal number of students, how many
students are in each class? Round your answer to the nearest ones (i. E. , one student).
Given that a student takes 6 classes before Test #3. If she has 1 class in total and each class has an equal number of students, we need to find out how many students are there in each class?
Let's assume that the number of students in each class is 'x'. Since the student has only one class, the total number of students in that class is equal to x. So, we can represent it as: Total students = x We can also represent the total number of classes as:
Total classes = 1 We are also given that a student takes 6 classes before Test #3.So, Total classes before test #3 = 6 + 1= 7Since the classes have an equal number of students, we can represent it as: Total students = Number of students in each class × Total number of classes x = (Total students) / (Total classes)On substituting the above values, we get:x = Total students / 1x = Total students Therefore, Total students = x = (Total students) / (Total classes)Total students = (x / 1)Total students = (Total students) / (7)Total students = (x / 7)Therefore, the total number of students in each class is x / 7.Round off the answer to the nearest whole number (i.e., one student), we get: Number of students in each class ≈ x / 7
Know more about find out how many students here:
https://brainly.com/question/21295513
#SPJ11
PLEASE EXPLAIN AND SHOW YOUR WORK
(a) The events "winning" and "playing at home" are not independent, because the probability of both the events are different;
(b) The events "losing" and "playing away" are also not independent, because both the events have different probability.
(a) To determine whether "winning" and "playing at home" are independent events, we need to check if the probability of winning is the same when team is playing at home or away.
From the table, we see that the probability of winning when playing at home is 0.2,
While the probability of winning when playing away is 0.05.
Since these probabilities are different, we can conclude that "winning" and "playing at home" are dependent events.
(b) To determine whether "losing" and "playing away" are independent events, we need to check if the probability of losing is the same whether the team is playing at home or away.
From the table, we see that the probability of losing when playing at home is 0.6,
While the probability of losing when playing away is 0.15.
Since these probabilities are different, we can conclude that "losing" and "playing away" are also dependent events.
Learn more about Probability here
https://brainly.com/question/30635387
#SPJ1
What volume (in L) will 50.0 g of nitrogen gas occupy at 2.0 atm of pressure and at 65 °C? Item equation/constant PV = nRT R=0.0821 (L-atm)/(mol-K) A. 4.8 L B. 9.5 L C. 50L D. 25 L
Nitrogen gas with a mass of 50.0 g at 2.0 atm and 65 °C will occupy a volume of approximately 25 L.
What is the volume of the nitrogen gas?The Ideal gas law or general gas equation is expressed as:
PV = nRT
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.0821 Latm/molK )
Given that:
Mass of the Nitrogen gas m = 50.0 g
Pressure P = 2.0 atm
Temperature T = 65 °C = (65 + 273.15) = 338.15K
Amount of gas n = ?
Volume of gas V = ?
First, we determine the amount of nitrogen gas.
Note: Molar mass of Nitrogen = 28 g/mol
Hence
Number of moles of nitrogen gas (n) = mass / molar mass
n = 50.0g / 28g/mol
n = 25/14 mol
Substituting the values into the ideal gas law equation:
PV = nRT
V = nRT/P
V = ( 25/14 × 0.0821 × 338.15 ) / 2.0
V = 24.78 L
V = 25 L
Therefore, the volume of the gas is 25 L.
Option D) 25 L is the correct answer.
Learn more about Ideal Gas Law here: brainly.com/question/4147359
#SPJ1
5. two wooden bridges with the lengths of 12 m 60 cm and 18 m 63 cm were made. what is the
difference in the length of both bridges?
The difference in length between the two bridges with the lengths of 12 m 60 cm and 18 m 63 cm is 6.03 meters.
To find the difference in length between the two bridges, we need to subtract the length of one bridge from the length of the other bridge.
Let's convert both lengths to the same unit, meters, for ease of calculation.
Length of the first bridge = 12 m 60 cm = 12.60 m
Length of the second bridge = 18 m 63 cm = 18.63 m
Now we can subtract the length of the first bridge from the length of the second bridge:
18.63 m - 12.60 m = 6.03 m
Therefore, the difference in length between the two bridges is 6.03 meters.
Learn more about length here:
https://brainly.com/question/31896631
#SPJ11
find the first four terms of the sequence given by the following
an= 8(2)^n-1 , n= 1,2,3…
The first four terms of the sequence are 15, 31, 63, and 127
Sequence is an ordered list of numbers. In this problem, we are given a sequence aₙ where n is a positive integer.
The formula for the sequence is aₙ = 8(2)ⁿ⁻¹, where n is the term number of the sequence.
To find the first four terms of the sequence, we need to substitute n=1,2,3, and 4, respectively, in the given formula for aₙ.
When n=1, a₁=8(2)¹⁻¹=8(2)-1=15.
When n=2, a₂=8(2)²⁻¹=8(4)-1=31.
When n=3, a₃=8(2)³⁻¹=8(8)-1=63.
When n=4, a₄=8(2)⁴⁻¹=8(16)-1=127.
Therefore, the first four terms of the sequence are 15, 31, 63, and 127.
To know more about Sequence here
https://brainly.com/question/13606963
#SPJ1
For these situations, state which measure of central tendency—mean, median, or mode—should be used.
a. The most typical case is desired. Mode
b. The distribution is open-ended Median
c. There is an extreme value in the data set. Median
d. The data are categorical. Mode
e. Further statistical computations will be needed. Mean
f. The values are to be divided into two approximately equal groups, one group containing the larger values and one containing the smaller values.
For the mentioned situations, the following measures of central tendency should be used :
a. Mode
b. Median
c. Median
d. Mode
e. Mean
f. Median
When the values are to be divided into two approximately equal groups, the median should be used as the measure of central tendency.
This is because the median divides the dataset into two equal halves. Half of the data will be larger than the median, and half will be smaller than the median.
For example, if you have a dataset of 10 values: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, the median is 5. This means that half of the values are larger than 5 and half are smaller than 5.
If you were to divide this dataset into two groups, one group containing the larger values and one containing the smaller values, you would put {1, 2, 3, 4, 5} in one group and {6, 7, 8, 9, 10} in the other group. Both groups would have five values and would be approximately equal.
Using the mean in this situation would not be appropriate, because the mean is sensitive to extreme values and would be pulled in the direction of any outliers.
Using the mode would not be useful either because the mode only tells us which value appears most frequently and does not give any information about the distribution of the data.
In summary, when dividing a dataset into two equal groups, the median should be used as the measure of central tendency because it gives a more accurate representation of the midpoint of the dataset, and is not influenced by extreme values or outliers.
To know more about central tendency refer here :
https://brainly.com/question/30218735#
#SPJ11
proposition. suppose n ∈ z. if n 2 is not divisible by 4, then n is not even
Proposition: Suppose n ∈ Z (n is an integer). If n^2 is not divisible by 4, then n is not even.
To prove this proposition, let's consider the two possible cases for an integer n: even or odd.
1. If n is even, then n = 2k, where k is an integer. In this case, n^2 = (2k)^2 = 4k^2. Since 4k^2 is a multiple of 4, n^2 is divisible by 4.
2. If n is odd, then n = 2k + 1, where k is an integer. In this case, n^2 = (2k + 1)^2 = 4k^2 + 4k + 1. This expression can be rewritten as 4(k^2 + k) + 1, which is not divisible by 4 because it has a remainder of 1 when divided by 4.
Based on these cases, we can conclude that if n^2 is not divisible by 4, then n must be an odd integer, and therefore, n is not even.
know more about proposition here
https://brainly.com/question/30895311
#SPJ11
For each graph below, write an equation of a line that is parallel to the line and passes through the square point. Then, write an equation of a line that is perpendicular to the line and passes through the square point.
The equation of parallel line: y = 2
The equation of perpendicular line: y = -x -3
The given line has a rise of 1 for each run of 1, so a slope of 1. If you draw a line with a slope of 1 through the given point, you can see that it intersects the y-axis at y = 2
Then the slope-intercept equation is
y = 2. . . . . equation of parallel line
The perpendicular line will have a slope that is the opposite reciprocal of the slope of the given line: m = -1/1 = -1
The equation is y = -x -3
Learn more about equations here;
https://brainly.com/question/25180086
#SPJ1
The population, P, of a city is changing at a rate dP/dt = 0.012P, in people per year. Approximately how many years will it take for the population to double? 57.762 58.108 83.333 166.667
The population, P, of a city is changing at a rate dP/dt = 0.012P, in people per year, and you want to know approximately how many years it will take for the population to double. To solve this problem, we can use the formula for exponential growth:P(t) = P₀ * e^(kt)
Here, P₀ is the initial population, P(t) is the population at time t, k is the growth rate, and e is the base of the natural logarithm (approximately 2.718).Since we want to find the time it takes for the population to double, we can set P(t) = 2 * P₀:
2 * P₀ = P₀ * e^(kt)
Divide both sides by P₀:
2 = e^(kt)
Take the natural logarithm of both sides:
ln(2) = ln(e^(kt))
ln(2) = kt
Now, we need to find the value of k. The given rate equation, dP/dt = 0.012P, tells us that k = 0.012. Plug this value into the equation:
ln(2) = 0.012t
To find t, divide both sides by 0.012:
t = ln(2) / 0.012 ≈ 57.762 years
So, it will take approximately 57.762 years for the population to double.
Learn more about population here
https://brainly.com/question/29885712
#SPJ11
If the results of each game are decided by fair coin flip, what is the probability that a given team i is a k-winner?
Assuming that the results of each game are determined by a fair coin flip, the probability that a given team i will win exactly k games out of n total games can be calculated using the binomial distribution.
The binomial distribution is a probability distribution that describes the number of successes in a fixed number of independent trials, where each trial has the same probability of success. In this case, each game is an independent trial, with a probability of 0.5 for the team to win or lose.
The probability of a given team i winning exactly k games out of n total games is calculated using the formula P(k wins for team i) =[tex](n choose k) * p^k * (1-p)^(n-k)[/tex], where p is the probability of winning a single game (in this case, 0.5), and (n choose k) represents the number of ways to choose k games out of n total games.
The result will be a value between 0 and 1, representing the probability of the team winning exactly k games out of n total games.
To know more about probability refer to-
https://brainly.com/question/30034780
#SPJ11
What is the end behavior of the function f(x)=−14x2?.
The end behavior of function f(x) = −14x² is that the graph approaches negative infinity as x approaches positive or negative infinity. We determine the end behavior of a polynomial function by examining the degree of the polynomial and the sign of the leading coefficient.
The given function is f(x) = −14x². Let's find out the end behavior of this function. End behavior is a term used to describe how a function behaves as x approaches positive infinity or negative infinity. For this, we use the leading coefficient and the degree of the polynomial function.
The degree of the given function is 2, and the leading coefficient is -14. Therefore, as x approaches positive infinity, the function f(x) approaches negative infinity, and as x approaches negative infinity, the function f(x) approaches negative infinity. The polynomial degree is even (2), and the leading coefficient is negative (-14).
In algebra, end behavior refers to the behavior of the graph of a polynomial function at its extremes. It may appear to rise without bounds (asymptotic behavior), approach a horizontal line, or drop without bounds on either side. It's a term used to describe how a function behaves as the input values approach the extremes. It is determined by examining the degree of the polynomial function and the sign of the leading coefficient.
The degree of the polynomial function is the highest exponent in the polynomial. In contrast, the leading coefficient is attached to the highest degree of the polynomial function. When determining the end behavior of a polynomial function, only the leading coefficient and the degree of the polynomial are considered.
The end behavior of a function is determined by the degree of the polynomial function and the sign of the leading coefficient. When the leading coefficient is positive, the polynomial rises without bounds as x approaches positive or negative infinity. When the leading coefficient is negative, the polynomial drops without bounds as x approaches positive or negative infinity.
Therefore, the end behavior of the given function f(x) = −14x² is that the graph approaches negative infinity as x approaches positive or negative infinity. We determine the end behavior of a polynomial function by examining the degree of the polynomial and the sign of the leading coefficient. In this case, the degree of the polynomial function is 2, and the leading coefficient is -14, which means that the graph will drop without bounds as x approaches positive or negative infinity.
To know more about the polynomial function, visit:
brainly.com/question/11298461
#SPJ11
If f'(x)=√(1+2x^3) and f(2)=0.4 and f(5)=
(A) 29.005
(B) 28.605 (C) 28.205
(D)-28.205
To find f(5), we need to use the fundamental theorem of calculus. Firstly, we integrate f'(x) to get f(x) + C, where C is the constant of integration. Then, we use the given value of f(2) to find the value of C. Finally, we substitute the value of f(x) in the equation to find f(5).
The fundamental theorem of calculus states that the derivative of an integral is the original function. In other words, if f'(x) is the derivative of f(x), then f(x) = ∫f'(x)dx + C, where C is the constant of integration.
In this question, we are given f'(x) = √(1+2x^3) and f(2) = 0.4. Integrating f'(x) with respect to x, we get f(x) = ∫√(1+2x^3)dx + C. To solve this integral, we can use u-substitution with u = 1 + 2x^3. Then, du/dx = 6x^2 and dx = du/6x^2. Substituting these values, we get
f(x) = (1/6)∫u^(1/2)du = (1/9)u^(3/2) + C = (1/9)(1 + 2x^3)^(3/2) + C
Using the given value of f(2) = 0.4, we can solve for C:
f(2) = (1/9)(1 + 2(2)^3)^(3/2) + C = 0.4
C = 0.4 - (1/9)(9) = 0
Finally, substituting C and x = 5 in the equation for f(x), we get
f(5) = (1/9)(1 + 2(5)^3)^(3/2) = 28.605
Therefore, the answer is (B) 28.605.
To find the value of f(5), we used the fundamental theorem of calculus to integrate f'(x) and find f(x) + C. Then, we solved for C using the given value of f(2) and substituted C and x = 5 to find f(5). The final answer is (B) 28.605.
To know more about calculas visit:
https://brainly.com/question/29169458
#SPJ11
The matrix A is given below, followed by a sequence {x_k} produced by the power method. Use these data to estimate the largest eigenvalue of A, and given a corresponding eigenvector. A = [6 3 1 2]; [1 0], [1 0.2051], [1 0.2132, [1.0.2148] Choose the best estimate for the dominant eigenvalue below.
The best estimate is 6.0316, with eigenvector of [0.0063 0.0002 0.0025 0.9999].
How to find the best estimate for the dominant eigenvalue?From the given sequence {[tex]x_k[/tex]}, we can estimate the largest eigenvalue of A using the power method.
Starting with an initial vector [tex]x_0 = [1 0][/tex], we can iteratively apply A to it, normalize the result, and use the resulting vector as the input for the next iteration.
The largest eigenvalue of A is estimated as the limit of the ratio of the norms of consecutive iterates, i.e.,
[tex]\lambda _{est} = lim ||x_k+1|| / ||x_k||[/tex]
Using this approach, we can compute the following estimates for λ_est:
k=0: [tex]x_0 = [1 0][/tex]
[tex]k=1: x_1 = [6 1], ||x_1|| = 6.0828\\k=2: x_2 = [37 6], ||x_2|| = 37.1214\\k=3: x_3 = [223 37], ||x_3|| = 223.1899\\k=4: x_4 = [1345 223], ||x_4|| = 1345.1404\\k=5: x_5 = [8101 1345], ||x_5|| = 8100.9334[/tex]
Therefore, we have:
[tex]\lambda_{est} \approx ||x_5|| / ||x_4|| \approx 6.0316[/tex]
The corresponding eigenvector can be taken as the final normalized iterate, i.e.,
[tex]v_{est} = x_5 / ||x_5|| \approx[/tex] [0.0063 0.0002 0.0025 0.9999]
Therefore, the best estimate for the dominant eigenvalue of A is approximately 6.0316, with a corresponding eigenvector of [0.0063 0.0002 0.0025 0.9999].
Learn more about eigenvalue
brainly.com/question/31650198
#SPJ11
Suppose that Kira is measuring the amount of sleep that the residents of Decatur County get per night. She does not know the standard deviation, nor does she know the distribution of the amount of sleep all Decatur residents get. Therefore, she prefers to obtain a large sample.Kira thus enlists the help of her friend, Jadzia, who works for OkHarmony. This popular dating service finds matches for its clients by how they respond to numerous survey questions. Jadzia slips Kira's question into the mix, and from the member database of over a thousand male and female singles, she is able to obtain a sample of 101 responses. The sample mean is 8.78 hours a night with a sample standard deviation of 1.12 hours. There are no outliers in the sample.Kira plans to perform a t-test with an alpha level of α = 0.05 on the hypothesis that Decatur residents get an average of less than 8 hours of sleep per night. Evaluate all of the following five statements as true or false.The sample is a simple random sample. The population standard deviation is not known. There are no outliers in the sample.The population is normally distributed, or the sample size is large enough The requirements for a t-test are met.
True statements are: (1) The sample mean is 8.78 hours a night with a sample standard deviation of 1.12 hours. (2)There are no outliers in the sample. (3) The population standard deviation is not known.
False statements:
It is not stated explicitly in the problem that the sample is a simple random sample. We can assume that it is a random sample since Jadzia obtained the sample from the member database of OkHarmony, but we cannot confirm that it is simple random sample.
It is not stated in the problem that the population is normally distributed, nor is it stated that the sample size is large enough. Therefore, we cannot assume that the population is normally distributed, or that the sample size is large enough to satisfy the central limit theorem.
We cannot confirm that the requirements for a t-test are met because we do not know whether the population is normally distributed, or whether the sample size is large enough to satisfy the central limit theorem.
Therefore, we cannot assume that the distribution of the sample means is approximately normal, which is required for a t-test.
To know more about Sample mean refer here:
https://brainly.com/question/31101410
#SPJ11
True/False: size dimensions on a drawing control the tolerance on 90° angles.
False . The FCF would include a symbol, such as perpendicularity or angularity, that defines the tolerance zone and a value that specifies the allowable deviation within that zone. The size dimensions on a drawing, on the other hand, would only control the overall size of the part, such as its length, width, and height.
False. Size dimensions on a drawing indicate the allowable variation in the size of a part, while tolerance dimensions control the allowable variation in the location of features on the part.
Tolerances are typically specified using geometric dimensioning and tolerancing (GD&T) symbols and can control a variety of aspects of a part, such as orientation, location, form, and profile.
For 90° angles, the tolerance would typically be controlled by a feature control frame (FCF) that specifies the allowable deviation from a perfect 90° angle.
The FCF would include a symbol, such as perpendicularity or angularity, that defines the tolerance zone and a value that specifies the allowable deviation within that zone. The size dimensions on a drawing, on the other hand, would only control the overall size of the part, such as its length, width, and height.
Learn more about tolerance here:
https://brainly.com/question/30478622
#SPJ11
Solve the differential equation xy' = y + xe^8y/x by making the change of variable v = y/x.
This is the general solution to the given differential equation in terms of the variable v = y/x.
To solve the differential equation xy' = y + xe^(8y/x) by making the change of variable v = y/x, we first need to express y' in terms of v and x.
Using the product rule for differentiation, we have:
y' = (dv/dx)x + v
Substituting this expression for y' into the given differential equation, we get:
x((dv/dx)x + v) = y + xe^(8y/x)
Substituting v = y/x, we get:
x(dv/dx + v) = v + e^(8v)
Simplifying, we get:
xdv/dx = e^(8v)
Separating the variables and integrating, we get:
∫e^(8v)/v dv = ∫1/x dx
Using integration by substitution (u = 8v, du/dv = 8), we get:
(1/8)∫e^u/u du = ln|x| + C
Substituting back v = y/x, we get:
(1/8)∫e^(8y/x)/(y/x) dy = ln|x| + C
Simplifying and multiplying both sides by 8, we get:
∫e^(8y/x) dy/y = 8ln|x| + C
To learn more about variable visit:
brainly.com/question/17344045
#SPJ11
C=(E/m)^(1/2)Part B Using the properties of exponents, apply the rational exponent to the numerator and the denominator, and then rationalize the denominator
The expression is rationalize to give C [tex]= \frac{\sqrt{Em} }{m}[/tex]
How to rationalize the formsFrom the information given, we have that the surd form is expressed as;
C=[tex](\frac{E}m} )^(^1^/^2^)[/tex]
This is represented as;
C =[tex]= \frac{\sqrt{E} }{\sqrt{m} }[/tex]
We need to know that the process of simplifying a fraction by removing surds (such as square roots or cube roots) from its denominator is known as rationalization of surds. A common approach involves selecting a conjugate expression that can remove the irrational surd by multiplying both the numerator and the denominator.
Then, we have;
C = [tex]= \frac{\sqrt{E} * \sqrt{m} }{\sqrt{m} * \sqrt{m} }[/tex]
multiply the values, we have;
C = [tex]\frac{\sqrt{Em} }{m}[/tex]
Learn more about surds at: https://brainly.com/question/840021
#SPJ4
A pair of vertical angles has measures (2y 5)° and (4y)°. What is the value of y? −52 −25 25 52.
Vertical angles are a pair of non-adjacent angles formed by the intersection of two lines. They are equal in measure. The value of y is 25.
In this case, we are given two vertical angles with measures (2y + 5)° and (4y)°. Since they are equal, we can set up an equation to find the value of y.
(2y + 5)° = (4y)°
To solve for y, we can start by subtracting (2y)° from both sides of the equation:
5° = 2y°
Next, divide both sides of the equation by 2 to isolate y:
2.5° = y°
Therefore, the value of y is 2.5° or 25.
Learn more about angles here:
https://brainly.com/question/31818999
#SPJ11
at time t = 2, a particle is located at position (1, 2). if the particle moves in the vector field f(x, y) = hx 2 y 2 , 2xyi, find its approximate location at time t = 3.
The particle's approximate location at time t = 3 is (5, 6), (6, 8).
Find the location of the particle at time t = 3, given that it starts at (1, 2) and moves in the vector field f(x, y) =[tex]hx^2y^2[/tex], 2xyi.We can use the formula for Euler's Method to approximate the particle's location at time t = 3:
x(3) = x(2) + f(x(2), y(2))(t(3) - t(2))
y(3) = y(2) + g(x(2), y(2))(t(3) - t(2))
where f(x, y) and g(x, y) are the x- and y-components of the vector field f(x, y) = hx2y2, 2xyi, respectively.
At time t = 2, the particle is located at (1, 2), so we have:
x(2) = 1
y(2) = 2
We can then calculate the x- and y-components of the vector field at (1, 2):
f(1, 2) = h(1)2(2)2, 2(1)(2)i = h4, 4i = (4, 4)
g(1, 2) = h(1)2(2)2, 2(1)(2)i = h4, 4i = (4, 4)
Plugging these values into the Euler's Method formula, we get:
x(3) = 1 + (4, 4)(1) = (5, 6)
y(3) = 2 + (4, 4)(1) = (6, 8)
Learn more about location
brainly.com/question/14134437
#SPJ11
how many 5-permutations are there of 11 distinct objects?
There are 55,440 possible 5-permutations of 11 distinct objects.
There are 55 5-permutations of 11 distinct objects.
To find the number of 5-permutations of 11 distinct objects, you need to use the formula for permutations, which is n!/(n-r)!, where n represents the total number of objects and r represents the number of objects to be arranged.
In this case, n = 11 (total number of distinct objects) and r = 5 (number of objects to be arranged).
Calculate (n-r)!
(11-5)! = 6!
Calculate 6!
6! = 6 × 5 × 4 × 3 × 2 × 1 = 720
Calculate n!
11! = 11 × 10 × 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 39,916,800
Divide n! by (n-r)!
39,916,800 ÷ 720 = 55,440
So, there are 55,440 possible 5-permutations of 11 distinct objects.
Learn more about permutations
brainly.com/question/30649574
#SPJ11
help!
question below
Answer:
a) 2
b) 199
Step-by-step explanation:
Part A:
100*2 - 100 = 100
(You'd multiply 100x2 first, which is 200, then subtract 100, and get 100.)
Part B:
There's parentheses in part B, so these get calculated first.
(200-199) = 1.
1 x 200 = 200
fill in the blank. ___ are expanding the possibilities of data displays as many of them allow users to adapt data displays to personal needs.
Interactive visualizations are expanding the possibilities of data displays as many of them allow users to adapt data displays to personal needs.
To know more about Interactive visualizations refer here:
https://brainly.com/question/28110252
#SPJ11
Problem 2. Consider the following recurrences and solve them using the unrolling method (i.e. find a suitable function f(n) such that T(n) € O(f(n))). (a) T(n) = {2161-2 :n < 2, 2T(n − 2) +1 :n > 2. : Answer. (b) <3, T(n) = m) {T(n − 3) + on instag = Answer.
The solution of the function is 3, 3, 7, 15, 15 and 31.
Let's look at the recurrence relation you mentioned: T(n) = { 3 : n< 2 , 2T(n-2) + 1 : n≥ 2. This formula defines the function T(n) recursively, in terms of its previous values. To solve it using the unrolling method, we need to start with the base case T(0) and T(1), which are given by the initial condition T(n) = 3 when n < 2.
T(0) = 3
T(1) = 3
Next, we can use the recurrence relation to calculate T(2) in terms of T(0) and T(1):
T(2) = 2T(0) + 1 = 2*3 + 1 = 7
We can continue this process to compute T(3), T(4), and so on, by using the recurrence relation to "unroll" the formula and express each term in terms of the previous ones:
T(3) = 2T(1) + 1 = 23 + 1 = 7
T(4) = 2T(2) + 1 = 27 + 1 = 15
T(5) = 2T(3) + 1 = 27 + 1 = 15
T(6) = 2T(4) + 1 = 215 + 1 = 31
To know more about recurrences here
https://brainly.com/question/30887126
#SPJ4
Complete Question:
Consider the following recurrences and solve them using the unrolling method
a) T(n) = { 3 : n< 2 , 2T(n-2) + 1 : n≥ 2
what is the value of e when sn2 and fe3
The value of e when Sn²⁺ and Fe³⁺ is 1.602 x 10⁻¹⁹ coulombs.
Your question involves Sn²⁺ and Fe³⁺, which represent tin(II) and iron(III) ions, respectively. The term "e" refers to the elementary charge, which is the absolute value of the charge carried by a single proton or the charge of an electron. In chemistry, this value is crucial for calculating the charge of ions in various chemical reactions.
The elementary charge, denoted as "e," is a fundamental constant with a value of approximately 1.602 x 10⁻¹⁹ coulombs.
This charge is applicable to any single proton or electron, regardless of the type of ion (Sn²⁺, Fe³⁺, or others) in question. It is important to note that the total charge of an ion will be the product of the elementary charge (e) and the ion's charge number (e.g., 2 for Sn²⁺ and 3 for Fe³⁺).
To know more about chemical reactions click on below link:
https://brainly.com/question/29762834#
#SPJ11
Jaden cut a square sheet of paper in half along a diagonal to make two equal
triangles. Each triangle has an area of 0. 08 square units. What is the length,
in units, of one side of the square?
Jaden cut a square sheet of paper in half along a diagonal to make two equal triangles. The length of one side of the square is approximately 0.56 units.
Let's assume that the length of one side of the square is "x" units. When the square sheet of paper is cut along the diagonal, it forms two congruent right triangles. The area of a right triangle is given by the formula: area = (1/2) * base * height.
In this case, each triangle has an area of 0.08 square units. Since the triangles are congruent, their areas are equal. Therefore, we can set up the equation: (1/2) * x * x = 0.08.
Simplifying the equation, we have: (1/2) *[tex]x^2[/tex] = 0.08. Multiplying both sides by 2, we get: [tex]x^2[/tex] = 0.16. Taking the square root of both sides, we find: x = √0.16 ≈ 0.4.
Therefore, the length of one side of the square is approximately 0.4 units, which corresponds to option A) 0.4 units.
Learn more about square root here:
https://brainly.com/question/29286039
#SPJ11
consider two random variables x and y with joint pmf given by pxy(k,l)=12k l,for k,l=1,2,3,... show that x and y are independent and find the marginal pmfs of x and y. find p(x2 y2≤10)
Answer:
Step-by-step explanation:
To show that X and Y are independent, we need to check that their joint PMF factorizes into the product of their marginal PMFs, i.e., PXY(k,l) = PX(k)PY(l) for all k,l.
To do this, we need to find the marginal PMFs of X and Y. We can do this by summing over all possible values of the other variable, as follows:
PX(k) = ∑l=1,2,3,... PXY(k,l) = ∑l=1,2,3,... 1/(2^(k+l))
let be the part of the plane 3x 4y z=1 which lies in the first octant, oriented upward. find the flux of the vector field f=3i 3j 1k across the surface s.
The flux of the vector field f = 3i + 3j + k across the surface s, which is the part of the plane 3x + 4y + z = 1 that lies in the first octant and is oriented upward, is 5/2.
To compute the surface integral, we first need to parameterize the surface s as a function of two variables. Let x and y be the parameters, then we can express z as z=1-3x-4y, and the position vector r(x,y)=xi+yj+(1-3x-4y)k. The normal vector of s is given by the gradient of the surface equation, which is n=∇(3x+4y+z)= -3i-4j+k. Then, the flux of f across s can be computed as the surface integral of f.n over s, which is equal to ∬s f.n dS = ∬s (-3i-4j+k).(3i+3j+k) dS.
Using the parameterization of s, we can express the surface integral as a double integral over the region R in the xy-plane bounded by x=0, y=0, and 3x+4y=1: ∬R (-3i-4j+k).(3i+3j+k) ||(∂r/∂x)×(∂r/∂y)|| dA. After computing the cross product and the magnitude of the resulting vector, we can evaluate the double integral to find the flux of f across s.
To find the flux of the vector field f across the surface s, we need to calculate the surface integral of the dot product of f and the unit normal vector of s over the region of s. Since s is the part of the plane 3x + 4y + z = 1 that lies in the first octant and is oriented upward, we can parameterize the surface as follows: r(u,v) = <u, v, 1 - 3u - 4v> for 0 ≤ u ≤ 1/3 and 0 ≤ v ≤ 1/4. Then, the unit normal vector of s is n = <-3, -4, 1>/sqrt(26). Taking the dot product of f and n, we get 3(-3/sqrt(26)) + 3(-4/sqrt(26)) + 1/sqrt(26) = -5/sqrt(26). Finally, integrating this dot product over the region of s, we get the flux of f across s as (-5/sqrt(26)) times the area of s, which is 5/2.
Learn more about surface integral here:
https://brainly.com/question/32088117
#SPJ11