Use the drop-down menu to identify the state of matter represented by each imagine.
A.
B.
C.
D.

Answer:

During the day, sunlight heats the ground, which in turn heats the air directly above it via conduction. At night, the ground cools and the heat flows from the warmer air directly above to the cooler ground via conduction.

Explanation:

Luck For You!

The process, in which conduction, convection, and radiation drive the water cycle in Earth’s system, is discussed in the answer.

The energy from the sun is what largely drives the water cycle. By evaporating water from the oceans, lakes, rivers, and even the soil, this solar energy powers the cycle. Through the process of transpiration, more water is transferred from plants to the atmosphere. Water droplets gradually acquire enough mass to fall back to Earth as precipitation as liquid water evaporates or transpires, forming clouds and water vapour.

The precipitation eventually transforms into runoff or groundwater and makes its way back into the surface reservoirs across a variety of periods. The hydrosphere currently contains the same amount of water as it has always contained in the Earth system since the water cycle is essentially a closed system.

Solar heat energy comes on earth's surface via radiation to the ponds, lakes, oceans, seas, rivers and other water resources and then the waterbodies get heated via conduction and evaporation happens. During evaporation time temperature water vapor goes to high altitude via convection of heat and cloud forms.

Learn more about water cycle here:

https://brainly.com/question/1151425

#SPJ2

Explanation:

a. Using the third equation of motion:

v2 = u2 + 2as

from the question;

the jet was initially at rest

hence u = 0

a = 1.75m/s2

s = 1500m

v2 = 02 + 2(1.75)(1500)

v2 = 5250

v = √5250

v = 72.46m/s

hence it moves with a velocity of 72.46m/s.

b. s = ut + 1/2at2

1500 = 0(t) + 1/2(1.75)t2

1500 × 2 = 2× 1/2(1.75)t2

3000 = 1.75t2

1714.29 = t2

41.4 = t

hence the time taken for the plane to down the runway is 41.4s.

Answer:

114.23 g/mol

Explanation:

Answer: Inertia!!

Explanation: I just completed the edg quiz and got that answer correct! Hope its not too late for you!

Answer:

A- inertia

Explanation:

edge2o2o

Answer:

120 miles per hour.

Explanation:

We need to find the time it takes my parents to drive home from the cottage. Since my father drives at 60 miles per hour, and the cottage is 240 miles from our home, and distance = speed × time. So, time = distance/speed = 240 mi/60 mi/h = 4 h.

So, it will take my father 4 hours to drive home from the cottage.

Since I have 2 hours to prepare for the party, the time left for me to drive to the cottage is 4 - 2 hrs = 2 hrs.

So, I'm supposed to drive to the cottage in at most 2 hours.

The speed at which I must drive in this time period is thus,  speed = distance/time = 240 miles/2 hours = 120 miles per hour.

So, I must drive at a minimum speed of 120 miles per hour.

Answer:

Let's define:

The position zero will be in the first point where the truck and police car meet. (So the initial position of both vehicles is zero)

Then, the position equation for the truck is:

T(t) = 20m/s*t

Where t is our variable, time in seconds.

Now, at t = 5s, the car starts accelerating.

Ac(t) = 2m/s^2                    for( t ≥ 5s)

For the velocity of the car, we must integrate that.

V(t) = (2m/s^2)*(t - 5)           for (t ≥ 5s)

Where i introduced a little change in the variable because the velocity of the car starts to increase for t larger than 5 seconds.

For the position of the car we integrate again.

C(t) = (1m/s)*(t - 5)^2            for (t ≥ 5s)

Now, let's answer the questions:

Determine the time at which the speed of the truck is equal to the speed of the police car.

Then we must have:

V(t) = (2m/s^2)*(t - 5)  = 20m/s.   (Remember that we only can use times requal or larger than 5 seconds).        

2m/s^2*t - 10m/s = 20m/s

2m/s^2*t = 30m/s

t = (30/2) s = 15s

The velocities of both vehicles will be the same after 15 seconds.

t1 = 15s

How the positions will compare at this time?

The easier thing will be to evaluate the position equation of each vehicle in this time:

T(15s) = 20m/s*15s = 300m

C(15s) = (1m/s^2)*(15s - 5s)^2 = (1m/s^2)*(10s)^2 = 100m.

Then we can see that the truck is 200m ahead of the car.

But remember that the police car is accelerating, so the velocity will keep increasing meaning that eventually, the car will catch the truck.

Answer:

Contact forces can be classified according to six types: tensional, spring, normal reaction, friction, air friction, and weight. Noncontact forces: Forces that take place when two objects do not touch. These forces can be classified according to three types: gravitational, electrical, and magnetic.

Explanation:

Answer:

Option (2)

Explanation:

To find the time taken by the girl we will use the formula,

Time = [tex]\frac{\text{Distance traveled}}{\text{Speed}}[/tex]

Time taken by a girl who moves down 52 m long and 1.4 m per second,

[tex]t_1=\frac{52}{1.4}[/tex]

[tex]t_1[/tex] = 37.14 sec.

Time taken to move through crowded hallway,

[tex]t_2[/tex] = [tex]\frac{79}{1.8}[/tex]

[tex]t_2=43.89[/tex] sec

Time taken to cover 25 m with speed 2.4 meter per sec,

[tex]t_3=\frac{25}{2.4}[/tex]

[tex]t_3=10.42[/tex] sec

Total time taken by the girl = [tex]t_1+t_2+t_3[/tex]

                                             = 37.14 + 43.89 + 10.42

                                             = 91.45

                                             ≈ 91 seconds

Option (2) will be the answer.

Answer:

Pushing force

Explanation:

You technically push a ball when kicking it.

Answer:

I will find a solution.

Explanation:

i will figure out the problem,then solve it

Answer:

the words

Explanation:

Answer:

Pressing the brake pedal

Explanation:

Decelerate sounds a lot like the word accelerate, but we know that the speed is decreasing, so it would have to be going down, getting slower, so whichever sounds like a good example of speed decreasing should be a good answer!

Answer:

System management

Explanation:

Answer:

the process by which organisms use oxygen to turn fuel, such as fats and sugars, into chemical energy. anaerobic respiration does not use oxygen. Respiration is used by all cells to turn fuel into energy that can be used to power cellular processes.

Answer:

Using robotic surgery, surgeons can perform delicate and complex procedures that may have been difficult or impossible with other methods. Often, robotic surgery makes minimally invasive surgery possible. The benefits of minimally invasive surgery include: Fewer complications, such as surgical site infection.

Explanation:

Explanation:

b'coz of the air we make it in the earth

Answer:

30-N

Explanation:

Because they are both acting on an object going opposite directions, then you simply subtract the 15 from 45 as 45N of force is stronger than 15N of force.

The net force on the object is 30 Newton due to these two opposite forces.

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

A spring balance can be used to calculate the Force. The Newton is the SI unit of force.

Here, a 15-N force and a 45-N force act on an object in opposite directions.

The net force on the object  due to these two opposite forces is = 45 N - 15 N

= 30 N.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ6

Answer:

c) more energy is trapped, which leads to an increase in Earth's global temperature

Explanation:

Greenhouse effect is caused by the trapping of the reflected energy from the surface of the earth into the atmosphere by some gases. Thus with time causes more energy to be trapped in the atmosphere, which cause an increase in the average ambient temperature of the earth. Because the energy could not escape out into space beyond the earth's atmosphere. Therefore, an increase in Earth's global temperature.

So that the correct option in the given question is C.

Answer:

The horizontal component of the velocity is approximately 13.22 m/s

Explanation:

The velocity of the kick which the football player gives the ball = 21 m/s

The angle of the path taken by the ball = 51°

The velocity can be represented vectorially, showing the vertical and horizontal components as follows;

v = 21 × cos(51°)·[tex]\hat i[/tex] + 21 × sin(51°)·[tex]\hat j[/tex]

Where we have;

The horizontal component of the velocity = 21 × cos(51°)

The vertical component of the velocity = 21 × sin(51°)

Therefore;

The horizontal component of the velocity = 21 × cos(51°) ≈ 13.22 m/s

The horizontal component of the velocity ≈ 13.22 m/s.

Answer:

Explanation:

The acceleration of an object given it's velocity and time taken can be found by using the formula

[tex]a = \frac{v}{t} \\ [/tex]

where

v is the velocity

t is the time

We have

[tex]a = \frac{30}{5} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:4

Explanation:

on edge 2020

Answer:

v=5.86 m/s

Explanation:

Given that,

Length of the string, l = 0.8 m

Maximum tension tolerated by the string, F = 15 N

Mass of the ball, m = 0.35 kg

We need to find the maximum speed the ball can have at the top of the circle. The ball is moving under the action of the centripetal force. The length of the string will be the radius of the circular path. The centripetal force is given by the relation as follows :

[tex]F=\dfrac{mv^2}{r}[/tex]

v is the maximum speed

[tex]v=\sqrt{\dfrac{Fr}{m}} \\\\v=\sqrt{\dfrac{15\times 0.8}{0.35}} \\\\v=5.86\ m/s[/tex]

Hence, the maximum speed of the ball is 5.86 m/s.

Answer:

Normal, Gravity, Friction, and Air Resistance.

Explanation:

When a moving car skid to stop and its wheels are locked across, then the following forces will be applied on the car:

Normal force: It will act counter to gravity that pushes an object against a surface and acts perpendicular to the contact surface.

Gravity: Gravity force acts in each and every object having mass and it can not be avoidable. So, the gravity force will also apply to the car and attract it to the earth's surface.

Friction: Friction is a force that acts opposite to the motion and stops or slows motion. Friction will be applied to the car that will oppose the motion of the car and stop it.

Air resistance: air resistance is defined as the forces exerted by air that acts opposite to the relative motion of an object. Air resistance will also be applied to the car when it will skid to stop as we are always surrounded by the air.

Hence, the correct answers are "Normal, Gravity, Friction, and Air Resistance."

Answer:

it's C! electromagnetic

Explanation:

Answer:

false

Explanation:

did the test this is correct

Answer:

1) and 2)

Explanation:

Hydrogen fuel is very efficient. More energy is extracted from this fuel source than with conventional power technologies, according to Tobin Smith for Billion Dollar Green. Fossil fuels have a high combustion rate and are capable of releasing tremendous amount of energy.

Answer:

Michael is heavier.

Explanation:

If Michael is 104 pounds, that is equal to 47 kg.

Erica is 44 kg which is 97 pounds.

104 is greater than 97, and 47 is greater than 44.

Answer:

Michael weighs more

Explanation:

First, you need to convert either kilograms into pounds or pounds into kilograms. For this problem, I will convert kilograms into pounds.

Multiply 44kg by 2.2 pounds to find how many pounds are in 44 kg

44 x 2.2 = 96.8 pounds

Michael - 104 pounds

Erica - 96.8 pounds

Michael is heavier than Erica because he weighs 7.2 pounds more than her.

(pounds to kilograms - 104/2.2 = 47.3 kg   Michael weighs 7.3 kilograms more than Erica)

Answer:

AMPERE - A unit of measure for the flow of current in a circuit. One ampere is the amount of current flow provided when one volt of electrical pressure is applied against one ohm of resistance. The ampere is used to measure electricity much as "gallons per minute" is used to measure water flow.

Explanation:

hope it helps

A unit of electrical flow is known as ampere

Answer:

c) billions

Explanation:

there are more than 0 stars, because our sun is a star

and  there are more than one because the milky way has a lot of suns

there aren't infinite because the milky way is finite it has some volume and even you made the smallest star possible you wouldn't have infinite stars

so the only option is billions