The current (I3) flowing through resistor three is not provided with the given information. To find the current, we would need the value of the total resistance (RT) which is not provided. Additionally, we would also need the value of R₁ and R₂ to calculate the total resistance.
What is resistor?A resistor is a passive electrical component that resists the flow of electrical current, reducing the current flowing through a circuit. They are often used to limit the current in a circuit, distribute power, or to adjust the voltage level in a circuit. They can be made of various materials such as carbon, metal film, and metal oxide, and are characterized by their resistance value measured in ohms (Ω).
Learn more about resistor in brainly.com/question/24297401
#SPJ1
Could these mutations make the virus more deadly to humans? Support your answer in one or two sentences.
When SARS-CoV-2 replicates, mistakes can be made in some copies of its genome, giving rise to mutations. Mutations happen randomly and are a source of genetic variations, or differences, among viruses.
Yes, mutations in the SARS-Cov2 may make the virus more deadly to humans because they are selected to make the virus superior in an adaptive way in order to form the next generations of viruses.
What is the evolutionary meaning of genetic mutations in viruses and organisms?The evolutionary meaning of genetic mutations in viruses and organisms is based on the fact that mutation per se is not adaptive (or beneficial), deleterious or neutral, but it depends on the enviroment in which they are and how it affects the differential reproduction of the virus.
Therefore, with this data, we can see that the evolutionary meaning of genetic mutations in viruses and organisms is the fact that after emergence may be selected to enhance the adaptive features of a virus and thus also make it more deadly to humans in the case of viruses.
Complete (correct) question:
When SARS-CoV-2 replicates, mistakes can be made in some copies of its genome, giving rise to mutations. Mutations happen randomly and are a source of genetic variations, or differences, among viruses.
Could these mutations make the virus more deadly to humans? Support your answer in one or two sentences.
Learn more about evolution and genetic mutations here:
https://brainly.com/question/14438201
#SPJ1
a acrostic poem using the word "transformation" that summarizes what you've learned about kinetic and potential energy.
The acrostic poem using the word "transformation" that summarizes what you've learned about kinetic and potential energy is given below
Tremendous force creates motion
Releasing energy in every notion
Acceleration leads to kinetic state
New forms of energy await
Formed through a change in position
Action and reaction in succession
Invisible forces at work
Never-ending cycle that lurks
Energy in constant flux
Making the world go round with tucks.
What is the acrostic poem about?The first letter T stands for "Tremendous force" that creates motion, this is related to kinetic energy. Kinetic energy is the energy of motion, it is the energy that an object possesses due to its motion. The more motion an object has, the more kinetic energy it possesses.
Also, The second letter R stands for "Releasing energy" in every notion, this refers to the transformation of potential energy into kinetic energy. Potential energy is the energy an object possesses due to its position or state, this energy is stored and can be released as kinetic energy.
Learn more about acrostic poem from
https://brainly.com/question/26346712
#SPJ1
Over the past few years, human use of coal has decreased in the United States. What has caused this effect on coal use?
A.
lower costs of other fossil fuels
B.
not including environmental costs in pricing
C.
relaxed regulations for air pollution
D.
falling prices for coal
This is a second part to a worksheet for physics that I’d love help with
Thus, wave speed is the distance covered per second as opposed to wave frequency, which is the number of cycles that occur each second.
How significant is wave frequency?Waves transfer energy, to sum up. The amount of energy they carry is inversely proportional to their frequency and amplitude. Both frequency and amplitude climb with increasing energy, correspondingly.
What exactly is a simple wave frequency?Wave frequency is the quantity of waves passing a particular place in a predetermined period of time. The hertz (Hz), which measures wave frequency in SI units, is one hertz, or one wave crossing a fixed point in one second.
To know more about wave frequency visit:
https://brainly.com/question/3795295
#SPJ1
A force of 55 N is applied to a 7.3 kg bowling ball for 0.81 seconds.
If the bowling ball was initially at rest, what is the momentum of the bowling ball after the force was applied?
How fast is the bowling ball moving?
1. The momentum of the bowling ball after the force was applied is 397.5 Ns.
2. The bowling ball is moving at a speed of 48.7 m/s.
Thank you for your help!
Answer:
Haemoglobin
Explanation:
I hope this helps you
What is the power (in Watts) of the Pokemon Hitmonlee that uses 237 N of force to move a huge boulder 83 m in 5s?
A figure skater begins spinning counterclock-
wise at an angular speed of 3.2 7 rad/s. Dur-
ing a 4.6 S interval, she slowly pulls her arms
inward and finally spins at 7.7 T rad/s.
3.
What is her average angular acceleration
during this time interval?
Answer in units of rad/s^2
According to the answer The average angular acceleration 1.3 rad/s^2.
What is angular acceleration?Angular acceleration is the rate of change of angular velocity over time. It is a vector quantity, which means that it has both a magnitude and direction. Angular acceleration is usually measured in units of radians per second squared (rad/s2). The magnitude of angular acceleration indicates how quickly the angular velocity is changing, and its direction indicates the direction of the angular velocity change.
The average angular acceleration of the figure skater during this time interval can be calculated using the equation a = (Δω)/(Δt). Here, Δω is the change in angular speed during the interval and Δt is the length of the interval.
Therefore, the average angular acceleration = (7.7 rad/s - 3.2 rad/s) / 4.6 s = 1.3 rad/s^2.
To learn more about angular acceleration
https://brainly.com/question/13014974
#SPJ1
A radio wave has a frequency of 5.5 × 104 hertz and travels at a speed of 3.0 × 108 meters/second. what is its wavelength? a. 5.5 × 104 meters b. 5.0 × 103 meters c. 5.5 × 103 meters d. 3.0 × 108 meters
The wavelength of the radio wave is 5.5 × 10³ m. If the frequency of the wave is 5.5 × 10⁴ hertz and the speed of the wave is 3.0 × 10⁸ m/sec.
The speed(v) of a wave is the product of wavelength(λ) and the frequency(η). We can understand this relation by the definition of the speed, which is the distance travelled by the object in unit time. The unit of distance is meter, also the unit of the wavelength is meter. On the other hand the unit of frequency is sec⁻¹. So,
Speed of a wave(v) = wavelength(λ) × Frequency(η)
Wavelength(λ) = speed of the wave(v)/Frequency(η)
Wavelength(λ) = (3.0 × 10⁸)/(5.5 × 10⁴)
Wavelength(λ) = 5.5 × 10³ m
To know more about wavelength, here
https://brainly.com/question/13533093
#SPJ4
summary of a article“what can i do to reduce my risk of developing cancer”
This article provides a comprehensive overview of the steps that can be taken to reduce the risk of developing cancer.
What is developing cancer?Developing cancer is a process in which abnormal cells in the body grow and divide uncontrollably. These abnormal cells can form tumors, invade other tissues, and spread to other parts of the body.
This article discusses ways to reduce the risk of developing cancer. It explains that there are many lifestyle changes that can be made to reduce the risk of cancer, such as eating a healthy diet, exercising regularly, avoiding smoking and excessive alcohol consumption, and limiting sun exposure. Additionally, the article suggests getting regular check-ups and screenings, as well as avoiding environmental toxins and pollutants. It also recommends getting vaccinated against certain viruses, such as HPV, which can increase the risk of certain types of cancer. Finally, the article emphasizes the importance of maintaining a healthy weight and reducing stress.
Overall, this article provides a comprehensive overview of the steps that can be taken to reduce the risk of developing cancer. By following the advice outlined in the article, individuals can take proactive steps to reduce their risk of developing cancer and improve their overall health.
To learn more about developing cancer
https://brainly.com/question/12657090
#SPJ1
What is the formula for electric force?
The electric force is a fundamental force of nature that is described by the formula which is F = qE.
The formula for electric force is F = qE, where F is the magnitude of the force, q is the charge of the two particles, and E is the electric field vector.
The electric force is responsible for a variety of phenomena, including the attraction of particles with opposite charges and the repulsion of particles with the same charge.
This force is an important part of the electromagnetic force, which also includes the magnetic force.
Electric force is the attractive or repulsive force that exists between two electric charges.
To learn more about electric, click here:
https://brainly.com/question/8971780
#SPJ4
A 1.5 kg block moves at 4 m/s moves along a frictionless horizontal surface. The block slides into a spring
with a spring constant of 240 N/m. How far is the spring compressed after the block comes to rest?
spring compresses 31.6 cm
kinetic energy of the block = potential energy of the spring
0.5mv^2 = 0.5kx^2
0.5*1.5*4^2 = 0.5*240*x^2
x = 0.316 m
so the spring compresses 31.6 cm
To know more about spring compressed visit:
https://brainly.com/question/13784481
#SPJ1
A hole is drilled through the midpoint of a meter stick. The meter stick is
then suspended so that it spins freely about its midpoint. If the mass of
the meter stick is 0.25 kg, what is its rotational inertia about the midpoint?
The rotational inertia of the meter stick about the midpoint is 0.0625 kg·m²
What is Rotational inertia?Rotational inertia, or moment of inertia, is the measure of an object's resistance to angular acceleration. It is calculated by multiplying the mass of the object by the square of its distance from the axis of rotation.In this case, the meter stick has a mass of 0.25 kg and is rotating about its midpoint. This means the distance from the axis of rotation to each end of the meter stick is 0.5 m (since the midpoint is the axis of rotation).Therefore, the rotational inertia of the meter stick about its midpoint is: Rotational inertia = 0.25 kg x (0.5 m)² = 0.0625 kg·m²
To learn more about Rotational inertia refer :
brainly.com/question/30326634
#SPJ1
Block a, with a mass of 4 kg, is moving with a speed of 2. 0 m/s while block b, with a mass of 8 kg, is moving in the opposite direction with a speed of 3 m/s. The center of mass of the two block-system is moving with a velocity of:.
The center of the mass of the block-system is moving with a velocity of 1.3 meters per second in the same direction as B.
In this case, we are provided with:
The mass of block A (M1) = 4 kg
The speed of block A (V1) = 2.0 meters per second
The mass of block B (M2) = 8 kg
The speed of block B (V2) = 3.0 meters per second
Consider that block A is moving in a positive direction while block B moving the opposite way.
To find the velocity of the center of the mass of the two block system, we can use this following formula:
[tex]V = \frac{M1V1 + M2V2}{M1+M2}[/tex]
To find the answer, simply plug in all of the information that you already have into the equation:
[tex]V = \frac{(4 kg) (2m/s) + (8kg) (-3m/s)}{4 kg + 8 kg}[/tex]
V = -1.3 m/s
Because the sign is negative, we may deduce that the center of mass of the two-block system is traveling in the same direction as B at a speed of 1.3 m/s.
To learn more about velocity, click here:
https://brainly.com/question/2594502
#SPJ4
balance a table tennis ball on the edge of a ruler. what happened ?
When trying to balance a tennis ball on the edge of a ruler, the ball can only balance when the balance point of the ball is determined.
What is the balance point of an object?The balance point of an object such as a tennis ball is the point where the object balances.
Even though an object's weight exerts downward pressure on each of its constituent parts, it is typically thought of as exerting a single force through the object's center of gravity or balance point.
The object's geometric center serves as its balancing point if its weight is spread evenly throughout it.
Learn more about balance point at: https://brainly.com/question/11904811
#SPJ1
What is the relationship of the gravitational force between the earth and the moon
A crane and box are both initially at rest. At time t=0s, the crane begins to drive forward at a constant speed of 0. 5ms, while also lifting the box with an upward acceleration of 1ms2. The box does not swing while being lifted by the crane.
(c) Assume that, at t=0 s, the horizontal position of the box is x=0 and it has a vertical position of y=0. Derive an equation that describes the vertical position y of the box as a function of the horizontal position x of the box.
(d) Does your equation from part (c) agree with your sketch in part (b)? Justify your response
The equation that describes the vertical position y of the box as a function of the horizontal position x of the box is y = 1/2 x^2 + 0.5xt.
A crane and box are both initially at rest. At time t=0s, the crane begins to drive forward at a constant speed of 0. 5ms, while also lifting the box with an upward acceleration of 1ms2.
This equation agrees with the sketch in part (b) because it shows that the vertical position of the box increases as the horizontal position increases, as shown in the sketch. This equation also shows that the vertical position of the box increases with time at a rate of 1 m/s^2, which is the value used for the upward acceleration of the box.
For more questions like Vertical click the link below:
https://brainly.com/question/14727430
#SPJ4
What are the benefits to using solar geothermal and wind power as alternative sources of energy?
The benefits of using solar, geothermal, and wind power as alternative sources of energy are low maintenance, accuracy, and highly renewable respectively.
Reduced electricity expenses, a wide range of applications, and minimal maintenance costs are all benefits of solar energy. The fact that it depends on the weather, that solar energy storage is expensive, and that it takes up a lot of space are some of its drawbacks.
Geothermal energy has the benefit of making it simpler to anticipate power output with pinpoint accuracy. Cons of energy management include high costs and the need for sustainability.
The benefit of wind energy is that it is a very clean and renewable energy source. It is readily available and has a low running cost. The energy's drawback is that it contributes to noise and visual pollution.
You can also learn about Geothermal energy from the following question:
https://brainly.com/question/1061324
#SPJ4
Fill in the missing word in this sentence. Changes in volume and density cause a gas in the atmosphere to rise as it is heated, and as a gas rises, its temperature __________.
Changes in volume and density cause a gas in the atmosphere to rise as it is heated, and as a gas rises, its temperature decreases.
What is volume and density about?As a gas is heated, the molecules that make up the gas gain energy and begin to move faster. As the molecules move faster, they collide with each other more frequently and with greater force, causing the gas to expand and its volume to increase.
As the gas expands, its density decreases, and its buoyancy increases, making it less dense than the surrounding air. When a gas is less dense than the surrounding air, it tends to rise, which is known as convection.
Therefore, As a gas rises, it experiences a decrease in temperature, this is due to the decrease in atmospheric pressure. When a gas rises, the pressure on it decreases, which causes the gas to cool down.
Learn more about density from
https://brainly.com/question/1354972
#SPJ1
A hot-water heater is operated by solar power. If the solar collector has an area of 5.8 m2 and the power delivered by sunlight is 550 W/m2, how long will it take to increase the temperature of 1.0 m3 of water from 25°C to 57°C?
Answer:
26°
Explanation:
inreases by a minute
A girl run at 5m/ for 2 econd, then walk at 4m/ for 3econd, an ride bicycle at 10m/ for 5econd what i average peed of the girl for the entire trip?
Answer:
Explanation:
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjkkkkkkkkkkkkkkkkiiiiiiiiiikooooooooooooop
To find the average speed of the girl for the entire trip, we need to calculate the total distance covered and the total time taken.
Distance covered during running = speed x time = 5 m/s x 2 s = 10 m
Distance covered during walking = speed x time = 4 m/s x 3 s = 12 m
Distance covered during biking = speed x time = 10 m/s x 5 s = 50 m
Total distance covered = 10 m + 12 m + 50 m = 72 m
Total time taken = 2 s + 3 s + 5 s = 10 s
Average speed = Total distance covered / Total time taken
= 72 m / 10 s
= 7.2 m/s
A spring has a spring constant of 25 newtons per meter. The minimum force required to stretch the spring 0. 25 meter from its equilibrium position is approximately.
A spring has a spring constant of 25 newtons per meter. The minimum force required to stretch the spring 0. 25 meter from its equilibrium position is approximately 6.25 N.
The minimal force needed to stretch the wire is in the range of,
We knew that the force, extension, and spring constant are connected by the following formula according to Hooke's law:
Extension (E) = Force (F) x Spring constant (K) (e)
F = Ke
We may calculate the spring's extension from its equilibrium position using the aforementioned method.
F = ke
F= 25 x0.25
F= 6.25
Therefore, 6.25 N of minimum force is needed in the scenario described.
learn more about force at https://brainly.com/question/30015952
#SPJ4
a ______ chart contains solid bars separated by spaces.
A bar chart contains solid bars separated by spaces.
Definition of bar chartBar chart definition is defined as a visualization and presentation technique either in the form of data, instructions or in the form of certain information. The data, instructions and information presented in the form of diagrams aim to make the data results easily understood by the reader.
Diagrams we often encounter in everyday life. Usually, diagrams are used in various fields such as statistics and informatics. With diagrams, the delivery of information or data can be easily understood by readers. Apart from that, diagrams are also used to present a particular procedure or algorithm in programming or informatics.
So, the meaning of a bar chart is a diagram that displays square bars or blocks that are used to display some data. This diagram also describes a change in object values or research data in a certain period.
Bar charts are used to present data in the interest of comparison, to compare more than one activity. In addition, bar charts are used to display changes in research data within a certain period.
Bar charts are also usually used to determine the development of the value of a data within a certain period of time and in a type with several categories or classifications.
Learn more about bar chart at https://brainly.com/question/15507084.
#SPJ4
You weigh 710 N. What would you weigh if the Earth were three times as massive as it is and its radius were five times its present value? Answer in units of N
Answer:
85.2 N
Explanation:
You want to know your weight if the Earth were 3 times as massive and had 5 times the present radius. Your weight is 710 N.
WeightYour weight is proportional to the mass of the Earth and the square of the radius between your mass and the center of the Earth. The revised dimensions of the earth would multiply your weight by ...
W = k(M/r²) = 710 N
W' = k((3M)/(5r)²) = k(M/r²)(3/25) = (710 N)(3/25) = 82.5 N
Your weight would be 82.5 N.
Rodrigo was working really hard to make the track team and he finally made it. However, he is not one of the strongest runners and is becoming
rather discouraged because some of the other kids are obviously better athletes than he is: What does this example BEST illustrate?
A. why extrinsic motivation often fails.
B. why valuing exercise and health is not enough.
C. why joining a team is often really discouraging.
D. why there should be an interview when joining a team.
The answer of the following statement is (C) why joining a team is often really discouraging.
What is team?
Team refers to a group of two or more people who work together to achieve a common goal. A team usually consists of individuals with different skills and abilities who collaborate to complete a task or project. Teams are important in a variety of situations, including work, school, sports, and social activities. A successful team is one in which members are committed to the same goal, trust and respect one another, and are willing to take risks and learn from mistakes. Teams are most effective when members are open to constructive criticism, provide feedback, and are willing to put in the time and effort necessary to achieve their goals.
To learn more about team
https://brainly.com/question/13033545
#SPJ1
A student is connecting three resistors of various resistances together in a circuit. In one configuration, the resistors are connected in a series. In another configuration, the resistors are connected in parallel. Explain which configuration results in a higher total resistance.
The configuration with the resistors connected in series results in a higher total resistance.
What is the difference between a series and parallel circuit configuration?A series circuit configuration is one in which the electrical components are connected end-to-end, so that the current must flow through each component before reaching the next one. This means that the current is the same through all components, and the total resistance of the circuit is equal to the sum of the individual resistances. In contrast, a parallel circuit configuration is one in which the electrical components are connected side-by-side, so that the current can flow through multiple components at the same time. This means that the voltage across all components is the same, and the total resistance of the circuit is lower than the smallest individual resistance.
To know more about Resistance visit : https://brainly.com/question/14547003
#SPJ1
Question 8 (2 points)
A negatively charged rubber balloon is sticking to Vivek's shirt. It is attracted to the
shirt's positive charges. He then pulls the balloon farther away from his shirt. How
does the electric force between the balloon and Vivek's shirt change when the
balloon is moved?
The electric force increases.
The electric force decreases.
The electric force does not change.
Answer:The balloon's negative charges are attracted to the positive charges in the can, and so the can rolls toward the balloon.
Explanation:
A block with the mass of 14.26kg is on a ramp with an incline of 41 degrees. If the block is stationary, what is the minimum value of the coefficient of static friction? PART E
Answer: .86
Explanation:
5- During the Canada Day fireworks demonstration, an observer measures the time difference between the
flash of light emitted, and the sound heard from the explosion to be 2.50 s. If the air temperature is 16°C.
how far away is the fireworks' explosion from the observer? (Velocity of sound is 345 m/s at 0 °C)
Answer:
Below
Explanation:
Speed of sound at 16 degrees C = 340.866 m/s
(Speed of sound at 0 degrees C is 331.3 m/s ....I do not know where they got the incorrect value of 345 m/s at 0 °C)
2.5 s * 340.866 m/s = 852 m away from fireworks
What was the average force the bumper exerted on the car over the 4 s period?
O A. 1,000 N
OB. 4,000 N
O C. 10,000 N
O D. 40,000 N
The dark region denotes the car's displacement over a 4-second time period. It can be determined as follows: (1/2)46 = 12 metres.
What is the average speed of a bumper car?Remember that a bumper car only travels at a speed of 5 mph on average. In an automotive crash test, a solid wall's average force on a 2500-kg car that hits the wall over a 0.22-s time period is measured to be 740,000 N.When a car collides with something at a low speed, the bumper will press backward to use the crumple zone to reduce the impact as the foam and fenders absorb the force. The bumper, fender, and foam crumpling restricts the amount of harm that may be done to the automobile and those inside of it.The average force is therefore equal to the body's mass times the average speed during a specific period of time.To learn more about determined refer to:https://brainly.com/question/30234949#SPJ1