what element is 1s2 2s2 2p3

Answer

The negative ion is larger than the original atom.

Explanation:

This means that with fewer electrons but the same number of positive protons, the size of the ionic radius will decrease.

I hope this helped!

The statement which is true is Core electrons effectively shield outer

electrons from nuclear charge.

Core electrons are those which are in close proximity with the nucleus.  The

core electrons repel the outer electrons farther away from the nucleus to

shield it from nuclear charge.

The valence electrons are usually found in the outermost part of the shell

and they are the easiest to remove due to the fact that they have to achieve

a stable octet configuration which makes them easily removed during

chemical reactions.

Read more on https://brainly.com/question/371590

Answer: core electrons effectively shield outer electrons from nuclear charge

Explanation:

Answer:

less

Explanation:

An electron has a charge of -1 so if there are more electrons than protons the overall charge of the atom is going to be negative

Answer:

8th or 0th group known as Noble gases

The oxidation half equation is Zn ------> Zn^2+ + 2e while the reduction half equation is Cu^2+  + 2e------> Cu.

A redox reaction is a reaction in which there is a loss/gain of electrons. The specie that gives out electrons experiences an increase in oxidation number while the specie that gains the electrons experiences a decrease in oxidation number.

For the reaction; CuCl2 + Zn → ZnCl2 + Cu

The oxidation half equation is;

Zn ------> Zn^2+ + 2e

The reduction half equation is;

Cu^2+  + 2e------> Cu

The chloride ion is excluded because its oxidation number does not change from left to right in the reaction.

Learn more: https://brainly.com/question/967776

Answer:

Explanation:

how many grams and moles of gold are present in 8.09 x 10^28 atoms of gold?

there are 6.02 x 10^23 molecules or atoms in 1 mole

of a compound or element

8.09 x 10^28 /(6.02 x 10^23) = 1.34 x 10^5 moles of Au

1 mole of gold (see periodic table for #79) 197 g

so 1.34 x 10^5 moles of Au weigh

197 x 1.34 x 10^5 = 2.64 x 10^7 g

your little gold treasure is worth

Gold Price Per Gram $59.87 x 2.64 x 10^7=

$$$$ 1.58 x 10^9

=$ 1,580,000,000

Answer:

The more polar the liquid, the more likely that it is miscible with water. The polarity of a liquid does not affect its miscibility with water. The less polar the liquid, the more likely that it is miscible with water. The more polar the liquid, the less likely that it is miscible with water.

Explanation:

hope it helps you

Miscibility of two liquids are directly related to their polarity. The likelihood that a liquid will mix with water increases with its polarity.

Polarity is the arrangement of electrical charge among the atoms connected by a chemical bond. Because both hydrogen atoms in H2 were electrically neutral, bonds among atoms of different elements were electrically inequivalent, as opposed to bonds among identical atoms, which are electrically uniform.

The likelihood that a liquid will mix with water increases with its polarity. Liquid miscibility with water is unaffected by the polarity of the liquid. The likelihood that a liquid will mix with water increases with decreasing polarity. The likelihood that a liquid will be miscible with water decreases with increasing polarity.

Therefore, miscibility and polarity are directly related.

To learn more about polarity, here:

https://brainly.com/question/29217577

#SPJ6

The concentration of [Ag+] present in the solution is 6.53 × 10⁻⁸ M

From the given information, the equation for the reaction between silver ion and ammonia can be represented as:

Ag⁺ + 2NH₃ ↔ [Ag(NH₃)₂]⁺

Given that the solubility constant (Ksp) for the product formed = 1.7 × 10⁷.

The solubility constant for this reaction can be expressed as:

[tex]\mathbf{Ksp = \dfrac{[Ag(NH_3)_2]^+}{[Ag^+][NH_3]^2} }[/tex]

where;

[tex]\mathbf{1.7 \times 10^7 = \dfrac{0.025}{(x)(0.15)^2}}[/tex]

[tex]\mathbf{1.7 \times 10^7 = \dfrac{1.1111}{x}}[/tex]

[tex]\mathbf{x = 6.54 \times 10^{-8} \ M}[/tex]

Therefore, we can conclude that the concentration of  [Ag+] = x = 6.54 × 10⁻⁸ M.

Learn more about solubility constant here:

https://brainly.com/question/17274813?referrer=searchResults

The statement "The coefficients in a balanced chemical equation directly represent moles of reacting substances." is true.

A balanced equation is one in which there is an equal number of atoms present on both sides of the reaction. When the atoms of elements in the reaction equal the atoms of elements or compounds in the products. The number of moles is similar before and after the reaction.

The chemical equation is the mathematical representation of any reaction, the number written on the front of the element or compound represents the number of atoms of the element present in the reaction. These numbers are called the coefficient of the chemical equation.

Thus, the statement is true, because the coefficients tell the mole of reacting substance.

Learn more about a balanced equation, here:

https://brainly.com/question/2777822

#SPJ2

Answer:

The surface temperature of a star determines the color of light it emits. Blue stars are hotter

hope this helps :)

Answer:

[Xe] 6s2

Explanation:

hope it helps Electron configuration

Answer:

g/100g

Explanation:

grams per 100 g of solvent or short term g/100g

Answer:

grams of solute per milliliters of solution

Explanation:

ur welcome

Answer:

A substrate is a molecule acted upon by an enzyme. A substrate is placed into the active site of the enzyme, or the area that permits weak bonds to be formed between the two molecules

Explanation:

Hope it helps:)

Answer:

What Questions?

Explanation:

What Questions?

Answer:

Explanation:

What is the Questions frist ?

Answer:

Group 17

Explanation:

Group 16 of nonmetals will react with alkaline earth metals to form a compound in a 1 : 1 ratio. Therefore, option (b) is correct.

Alkaline earth metals or Group 2 includes six elements which are Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), Barium (Ba), and Radium (Ra).

This group contains smooth, silver metals with a less metallic character than group 1.  All alkaline earth metals have two valence electrons, giving a valency of 2. These metals easily lose electrons to form compounds via ionic bonds and become more stable.

The valency of calcium is 2 and the valency of the elements of group 16 is also 2. Therefore they can combine 1 : 1 ratio to form a neutral compound.

Ca²⁺    +   O²⁻   →  CaO

Therefore, the nonmetals of group 16 will react with alkaline earth metal.

Learn more about alkaline earth metals, here:

https://brainly.com/question/11857448

#SPJ2

Answer:

OPTION C is correct

When magnesium burns, it combines with oxygen (O2) from the air to form magnesium oxide (MgO) according to the following equation: 2Mg(s) + O2(g) → 2MgO(s) Magnesium oxide is an ionic compound containing Mg2+ and O2− ions whereas Mg(s) and O2(g) are elements with no charges.

Answer:

The answer is A.

Explanation:

They are both made of amino acids.

Answer:

Explanation:

Amplitude, or the size of the wave height, affects the loudness. Larger the amplitude, the louder the volume. Period, or the time it takes for the wave to complete one round, determines the pitch. Shorter period (or higher frequency) means higher pitch.

i dont know

Explanation:

Sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Given the following chemical elements:

Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.

Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.

As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.

Also, chemical reactivity decreases down a group on the periodic table.

Based on the periodic table, the valency for the given chemical elements are:

In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Find more information: https://brainly.com/question/18214726

Answer:

Cu3 (PO4)2

3×64 + 2×(31+ 4×16)

192 + 2×(31+64)

192 + 2×(95)

192+190

=382g

Answer:

[tex]50.0 \div 59.0 = 10[/tex]

right

Answer:

Group 2A (or IIA) of the periodic table are the alkaline earth metals:  beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).  They are harder and less reactive than the alkali metals of Group 1A.  The name comes from the fact that the oxides of these metals produced basic solutions when dissolved in water, and they remained solids at the temperatures available to the ancient alchemists.  Like the Group 1A elements, the alkaline earth metals are too reactive to be found in nature in their elemental form.

The alkaline earth metals have two valence electrons in their highest-energy orbitals (ns2). They are smaller than the alkali metals of the same period, and therefore have higher ionization energies.  In most cases, the alkaline earth metals are ionized to form a 2+ charge.

The alkaline earth metals have much higher melting points than the alkali metals: beryllium melts at 1287ºC, magnesium at 649ºC, calcium at 839ºC, strontium at 768ºC, barium at 727ºC, and radium at 700ºC.  They are harder metals than the Group 1A elements, but are soft and lightweight compared to many of the transition metals.

Salts of the Group 2A metals are less soluble in water than those of Group 1A because of the higher charge densities on the 2+ cations; nevertheless, many Group 2A salts are at least moderately soluble.   Some Group 2A salts bond strongly to water molecules, and crystallize as hydrates; among these are Epsom salt, MgSO4·7H2O, and gypsum, CaSO4·2H2O.

Explanation:

Answer:

H2, N2, O2, F2, Cl2, Br2, I2

Explanation:

The 7 diatomic elements in the periodic table are Hydrogen, Nitrogen, Oxygen, Fluorine, Chlorine, Bromine and Iodine.

The volume v of the solid obtained is 15.08

By using the cylindrical shell method to find the volume v of the solid which can be expressed by the formula;

Then, it is paramount to determine the radius and height of the shell.

From the given information;

Then, the volume v of the solid can be estimated by using the cylindrical shell method as follows;

[tex]\mathbf{V = \int ^1_0 2 \pi (2-x) (8x^3) \ dx}[/tex]

Open brackets;

[tex]\mathbf{V = 2 \pi \int ^1_0 (16x^3 -8x^4) \ dx}[/tex]

Taking the integral form;

[tex]\mathbf{V = 2 \pi \Big [ \dfrac{16x^4}{4}-\dfrac{8x^5}{5} \Big]^1_0}[/tex]

Solving the terms in the bracket

[tex]\mathbf{V = 2 \pi \Big [ \dfrac{16(1)^4}{4}-\dfrac{8(1)^5}{5} -0\Big]}[/tex]

[tex]\mathbf{V = 2 \pi \Big [ 4-\dfrac{8}{5} \Big]}[/tex]

[tex]\mathbf{V = 2 \pi \Big [ \dfrac{20-8}{5} \Big]}[/tex]

[tex]\mathbf{V = 2 \pi \Big [ \dfrac{12}{5} \Big]}[/tex]

[tex]\mathbf{V = \dfrac{24\pi}{5}}[/tex]

[tex]\mathbf{V =15.08}[/tex]

Therefore, we can conclude that the volume v of the solid obtained is 15.08

Learn more about the Volume v of the solid here;

https://brainly.com/question/11388209?referrer=searchResults

Answer:

.06 M NA+

Explanation:

You go from (.02M Na3PO4 / 1) x (3 mole Na+ / 1 mole Na3PO4) = .06 M Na+

Answer:

Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.

Explanation:

Actuating mechanism is the dry-chemical fixed application method which

introduces a concentration of agent into a closed area.

The actuating mechanism is commonly used in piping systems and

involves the transport of a control member in automatic or remote control

systems.

The closed system makes manual navigation very difficult which is why the

actuating mechanism in automatic systems are usually used to make it less

tedious and accurate.

Read more on https://brainly.com/question/19914723

Answer:

Freeze wedging is caused by the repeated freeze-thaw. Frost wedging occurs as the result of 9% expansion of water when it is converted to ice. Cracks filled with water are forced further apart when it freezes.