Answer:
Kinetic Energy (Hope This Helps)
Explanation:
(Brainliest)
Answer:
Chemical energy to kinetic energy. (Arguably heat energy (thermal) because of respiration)
What mass of gold (Au) contains the same number of atoms as 2.61 g of aluminum (Al)?
Answer:
19.11g
Explanation:
mole = mass ÷ molar mass
mole = 2.61 ÷ 27
mole = 0.097mol
Number of atoms in 2.61g of Aluminum = 6.022 × 10^23 × 0.097
= 0.584 × 10^23
= 5.84 × 10^22atoms
To get the same number of atoms for Gold (Au), we multiply the atomic mass of Au by 0.097mol
Atomic mass of Au = 197g/mol
mass = mole × molar mass
mass = 0.097 × 197
mass = 19.109g
mass = 19.11g
Dan wants to test the effects of different amounts of antibiotic on bacteria. While setting up his experiment he makes sure to use the same type of antibiotic, the same type of bacteria, and the same type of incubator for each trial. Which phrase below best describes this part of the experiment?
Answer:
C
Explanation:
A. analyzing results
B. collecting data
C. choosing controlled variables
D. making a prediction
The correct answer would be choosing controlled variables.
The controlled variables are factors that are kept constant among the different groups of subjects during the course of an experiment so as to be able to isolate the effects of a single factor - the independent variable.
There are basically 3 types of variables in a scientific experiment;
1. The independent variable
2. The dependent variable
3. The controlled variable
The independent variables are the variables whose effects are to be determined in the course of experiments. The dependent variables are the variables that are actually measured during the course of experiments and whose values vary along with that of the independent variables. The controlled variables are other variables required for the experiment but which must be kept constant among subjects in order to be able to isolate the effects of the independent variable.
The correct option is C.
oxidation number of lead is PbO2
Answer:
+4
Explanation:
Is the singular possessive noun of walrus is walrus’s?
Answer:
Yes
Explanation:
Answer:the plural of walrus is walruses
Explanation:
A process by which softer, less weather-resistant rocks wear away and leave harder, more weather-resistant rocks behind is called a. differential weathering. c. chemical weathering. b. mechanical weathering. d. ice wedging.
Answer:
geosphere
Explanation:
Answer:
differential weathering.
Explanation:
50 POINTS..!!! NEED RHE ANSWER ASAP..!!! consider the original wave at the top of the illustration. compare the original wave to the other four. which wave represents a wave with the same volume but a lower pitch?
a). wave a
b). wave b
c). wave c
d). wave d
Answer:
my best guess is b
Explanation:
typically the lower the pitch the longer the wave line inbetween the inclines are
Pedro is heating sugar to make caramel for an investigation. As the sugar is heating, he is looking for evidence of a chemical change. Select the observation that Pedro made about the chemical change.
Answer:
The sugar atoms formed new atoms after caramelization.
Explanation:
When sugar is heated to a certain temperature, it becomes caramel. Te formation of caramel from the sugar is a chemical process.
In the context, Pedro is doing an investigation by heating sugar to make caramel. Burning of the sugar crystal is a chemical change as different chemicals are present in both. The caramel formed cannot be revered back to sugar crystal, this also proves the chemical change of caramelization of sugar cubes. Sugar consists of carbon, oxygen and hydrogen atoms. It reacts with atmospheric oxygen atoms to form new groups of atoms and forms caramel.
Why do flowers have brightly-coloured petals
Answer:
Petals are modified leaves that surround the reproductive parts of flowers. They are often brightly colored or unusually shaped to attract pollinators. Together, all of the petals of a flower are called corolla.
What is the molar mass of NaOCI?
Answer:
the molar mass of NaOCl is 74.5g
Calculate the H+ ion concentration in a 8.8 x 10-4 M Ca(OH)2
solution.
form the molar concentration of the Ca(OH)2 which is a base we can deduct the pOH
pOH=-lg[OH-]
[OH-]=8.8 x 10-4 M
pOH=4
pH=14-pOH
pH=10
-lg[H+]=10
[H+]=10^-10
The concentration of Hydrogen ion [H⁺] in 8.8×10¯⁴ M Ca(OH)₂ is 5.68×10¯¹² M
The concentration of Hydrogen ion [H⁺] in a solution talks about the acidicity the solution. Thus, we can obtain the concentration of Hydrogen ion [H⁺] in 8.8×10¯⁴ M Ca(OH)₂ solution as illustrated below:
Step 1:Data obtained from the question
Concentration of Ca(OH)₂ = 8.8×10¯⁴ M
Concentration of Hydrogen ion [H⁺] =..?
Step 2:Determination of the concentration of Hydroxide ion [OH¯]
Concentration of Ca(OH)₂ = 8.8×10¯⁴ M
Concentration of Hydroxide ion [OH¯] =?
Ca(OH)₂ (aq)⇄Ca²⁺ (aq) + 2OH¯(aq)
From the balanced equation above,
1 mole Ca(OH)₂ produced 2 moles of OH¯.
Therefore, 8.8×10¯⁴ M Ca(OH)₂ will produce = 8.8×10¯⁴ × 2 = 1.76×10¯³ M
Thus, the Concentration of Hydroxide ion [OH¯] is 1.76×10¯³ M
Step 3:Determination of concentration of Hydrogen ion [H⁺]. Concentration of Hydroxide ion [OH¯] = 1.76×10¯³ M
Concentration of Hydrogen ion [H⁺] =..?[tex]H^{+} * OH^{-} = 1*10^{-14}\\H^{+} * 1.76^{-3} = 1*10^{-14}[/tex]
Divide both side by 1.76×10¯³
[tex]H^{+} = \frac{1*10^{-14} }{1.76*10^{-3}}\\[/tex]
[H⁺] = 5.68×10¯¹² M
Therefore, the concentration of Hydrogen ion [H⁺] in the solution is 5.68×10¯¹² M
Learn more: https://brainly.com/question/17122769
The model below shows a part of a human body's muscular system.
Muscles are organs that make movement possible. Which organ system is responsible for controlling muscular movement?
A. Endocrine system
B. Skeletal system
C. Nervous system
D. Digestive system
Answer:
you must go to jones im doing the same test
Explanation:
How would you define speed and the formula to find speed?
Answer:
Speed is how fast you cover a certain distance
[tex]Speed=\frac{Distance}{time}[/tex]
what is the mass of 1.506 x 10^24 atoms of Argon
Answer:
99.90g
Explanation:
1.506 x 10^24atoms × [tex]\frac{1mol}{6.022*10^{23}atoms}[/tex] × [tex]\frac{39.948grams}{1mol}[/tex] = 99.90grams
multiply the atom by constant and by its molar mass
1.506 x 10²⁴ atoms of argons gas is two moles. One mole of argon weighs 35.9 g. Thus mass of two moles of argon is 89.9 g.
What is argon?Argon is 18th element in periodic table. It is placed in 18 the group and it is a noble gas or inert gas with completely filled orbitals. The group members of argon are neon, krypton, xenon and radon.
One mole of every substance contains 6.022 × 10²³ atoms. This number is called Avogadro number. Therefore, one mole of every element contains Avogadro number of atoms. The atomic mass of an element is the mass of one mole of that element.
Mass of one mole of argon is 35.9 g. Thus, it contains 6.022 × 10²³ atoms. Hence, the number of moles that contains 1.506 x 10²⁴ atoms is calculated as follows:
no.of moles = 1.506 x 10²⁴ / 6.022 × 10²³
= 2.5 moles.
The mass of 2.5 moles of argon is 2.5 × 35.9 = 89.9 g. Hence, the mass of 1.506 x 10²⁴ argon atoms is 89.9 g.
To find more about argon, refer the link:
https://brainly.com/question/133359
#SPJ2
NEED HELP ASAP! Newton's Law of Gravity says that any the effect of gravity between two objects depends on what two factors?
A: inductance and capacitance
B: Newtons and kilograms.
C: distance and mass.
D:joules and kelvins.
(will mark as brainiest)
(don't answer if you don't know please).
Answer:
C. Distance and mass.
Explanation:
Objects that have greater mass have more force of gravity between them.
3. What mass of copper could be deposited from a copper(II) Sulphate solution using a current of 5.0 A over 100 seconds? ( F =96,500C,Charge of Cu in CuSO4 = +2)
Mass of copper : 0.165 g
Further explanationGiven
5.0 A over 100 seconds
Required
Mass of copper
Solution
Faraday's law:
The mass of the substance formed at each electrode is proportional to the electric current flowing in the electrolysis
[tex]\tt W=\dfrac{e.i.t}{96500}[/tex]
e = Ar / valence = eqivalent weight
i = current
t = time
W = weight
CuSO₄ ----> Cu²⁺ + SO₄²⁻
Cu ----> Cu²⁺ + 2e
e = Ar/2
= 63,5/2 = 31,75
[tex]\tt W=\dfrac{31.75\times 5\times 100}{96500}=0.165~g[/tex]
Help pls!!! Thnk you
Answer:
521 nm
Explanation:
From the question given above, the following data were obtained:
Frequency (v) = 5.76×10¹⁴ s¯¹.
Wavelength (λ) =.?
RECALL: velocity (c) of light = 3×10⁸ m/s
Thus, we can obtain the wavelength of the green light by using the following formula:
c = vλ
3×10⁸ = 5.76×10¹⁴ × λ
Divide both side by 5.76×10¹⁴
λ = 3×10⁸ / 5.76×10¹⁴
λ = 5.21×10¯⁷ m
Next, we shall convert 5.21×10¯⁷ m to nanometer (nm). This can be obtained as follow:
1 m = 1×10⁹ nm
Therefore,
5.21×10¯⁷ m = 5.21×10¯⁷ m × 1×10⁹ nm / 1 m
5.21×10¯⁷ m = 521 nm
Thus, 5.21×10¯⁷ m is equivalent to 521 nm
Therefore, the wavelength (λ) of the photon of the green light is 521 nm.
Answer:
the wavelength (λ) of the photon of the green light is 521 nm.
What is the metallic ion in the compound CuCl2?
Answer:
Cu2+
Srry if I didnt help..
The metallic ion in the compound CuCl₂ is copper (Cu).
What is the metallic ion in the compound CuCl2?CuCl₂ is a combination of copper (Cu) and chlorine (Cl) ions. In this compound, copper has a positive charge of 2, and chlorine has a negative charge of 1. Copper is a type of metal that can make different charged particles (called ions) depending on what it combines with and how it reacts.
In CuCl₂, the copper ion has a positive charge of 2. This means that it has given away two electrons and has an oxidation state of +2. The chlorine ions have a negative charge of -1 because they have taken in one electron. This shows that they have an oxidation state of -1.
Learn more on compound on https://brainly.com/question/14782984
#SPJ6
A scoop of potassium oxide was placed in
55g of water which produced 67g of
potassium hydroxide. What mass of
potassium oxide was used?
A scoop of potassium oxide was placed in 55g of water which produced 67g of potassium hydroxide then mass of potassium oxide was used is 12g
Potassium oxide is used widely in the agricultural industry as a fertilizer
Here given data is
Potassium oxide was placed in 55g of water which produced 67g of potassium hydroxide
We have to calculate mass of potassium oxide was used =?
Then the reaction is
K₂O + H₂O → KOH
x + 55g = 67g
x = 67g - 55g
x = 12g
Therefore mass of potassium oxide was used is 12g
Know more about potassium hydroxide
https://brainly.com/question/8906000
#SPJ1
his table shows the mass and volume of four different objects.
A two-column table with 4 rows. The first column titled objects has entries W, X, Y, Z. The second column titled Measurements has entries Mass: 16 grams Volume: 84 centimeters cubed in the first cell, Mass: 12 grams Volume: 5 centimeters cubed in the second cell, Mass: 4 grams Volume: 6 centimeters cubed in the third cell, Mass: 408 grams Volume: 216 centimeters cubed in the fourth cell.
Which ranks the objects from most to least dense?
X, Y, W, Z
X, Z, Y, W
W, Y, Z, X
Z, Y, X, W
Ranks the objects from most to least dense : X,Z,Y,W
Further explanationGiven
Object W : m=16 g, V=84 cm³
Object X : m=12 g, V= 5 cm³
Object Y : m=4 g, V= 6 cm³
Object Z : m=408 g g, V= 216 cm³
Required
Density
Solution
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
1. Object W
[tex]\tt \rho=\dfrac{16}{84}=0.19[/tex]
2. Object X
[tex]\tt \rho=\dfrac{12}{5}=2.4[/tex]
3. Object Y
[tex]\tt \rho=\dfrac{4}{6}=0.67[/tex]
4. Object Z
[tex]\tt \rho=\dfrac{408}{216}=1.89[/tex]
From most to least dense : X,Z,Y,W
Which formula represents a compound containing three atoms? A) HNO3 B)H2O C)LIF D)ZnSO4
Answer:
c actual contains three atom
Can someone solve this for me I'm confused.
Answer:
310.53 g of Cu.
Explanation:
The balanced equation for the reaction is given below:
CuSO₄ + Zn —> ZnSO₄ + Cu
Next, we shall determine the mass of CuSO₄ that reacted and the mass Cu produced from the balanced equation. This can be obtained as follow:
Molar mass of CuSO₄ = 63.5 + 32 + (16×4)
= 63.5 + 32 + 64
= 159.5 g/mol
Mass of CuSO₄ from the balanced equation = 1 × 159.5 = 159.5 g
Molar mass of Cu = 63.5 g/mol
Mass of Cu from the balanced equation = 1 × 63.5 = 63.5 g
Summary:
From the balanced equation above,
159.5 g of CuSO₄ reacted to produce 63.5 g of Cu.
Finally, we shall determine the mass of Cu produced by the reaction of 780 g of CuSO₄. This can be obtained as follow:
From the balanced equation above,
159.5 g of CuSO₄ reacted to produce 63.5 g of Cu.
Therefore, 780 g of CuSO₄ will react to produce = (780 × 63.5)/159.5 = 310.53 g of Cu.
Thus, 310.53 g of Cu were obtained from the reaction.
How many grams are in 2.3 x 10^ -4 moles of calcium phosphate?
Answer:
Mass = 713.4 ×10⁻⁴ g
Explanation:
Given data:
Number of moles of calcium phosphate = 2.3×10⁻⁴ mol
Mass of calcium phosphate = ?
Solution:
Formula:
Number of moles = mass/molar mass
Molar mass of calcium phosphate is 310.18 g/mol
by putting values,
2.3×10⁻⁴ mol = mass / 310.18 g/mol
Mass = 2.3×10⁻⁴ mol × 310.18 g/mol
Mass = 713.4 ×10⁻⁴ g
A compound consists of 50.04% carbon, 5.59% hydrogen, and 44.37% oxygen. What is the empirical formula of this compound?
The empirical formula of the compound is C₃H₄O₂
From the question given above, the following data were obtained:
Carbon = 50.04%
Hydrogen = 5.59%
Oxygen = 44.37%
Empirical formula = ?Divide by their molar mass
C = 50.04 / 12 = 4.17
H = 5.59 / 1 = 5.59
O = 44.37 / 16 = 2.773
Divide by the smallest
C = 4.17 / 2.773 = 1.5
H = 5.59 / 2.773 = 2
O = 2.773 / 2.773 = 1
Multiply by 2 to express in whole number
C = 1.5 × 2 = 3
H = 2 × 2 = 4
O = 1 × 2 = 2
Therefore, the empirical formula of the compound is C₃H₄O₂
Learn more: https://brainly.com/question/15907539
Why the graph isn't just a single sloped straight line.
Answer:
the equation could have mulitplication and square roots which may change the function of the line
38
Both ionization and dissociation produce ions of the solute in solution.
How do the two processes differ? Write two differences. *
Answer:
Detail is given below
Explanation:
Differences:
Ionization involves the formation of ions while in dissociation substance are break into atoms, ions or molecules.
In ionization atoms and molecules gain positive or negative charge.
While in dissociation positive and negative ions are not essentially formed substance could be break into neutral small particles.
Ionization occur in covalent compounds while dissociation occur in ionic compound.
Ionization example:
Cl + e⁻ → Cl⁻
Dissociation example:
NaCl → Na⁺ + Cl⁻
Here sodium and chloride ions are formed but in sodium chloride these ions were already present.
Another example:
N₂O₄ → 2NO₂
Describe in three sentences how Ca (Calcium) can get a positive two charge?
1. A group of elements that includes the most active of the nonmetals is the
a. nitrogen group.
c. noble gases.
b. alkaline earths.
d. halogens.
Answer:
D. Halogens
Explanation:
All elements in these groups have 7 valence electrons, meaning their electronegativity is the highest among the elements.
How does the atomic radius of an element is related to its metallic character
Answer:
The large the atomic radius the more the metallic character of elements
Explanation:
The atomic radius is related to the metallic character in a way that the larger the atomic radius, the more metallic a body becomes.
Therefore, as we go down a group, metallic character increases.
Metallic character relies on the ability and willingness of an atom to share its valence electrons. As the size of an atom becomes large, the more metallic it is and the more its metallic character. In some other cases this character is known as electropositivity.please answer; i’ll give brain
Answer:
the answer to this question is option A mark me as brainliest
What is responsible for the blue sky?
Answer:
Gasses and particles in Earth's atmosphere scatter sunlight in all directions. Blue light is scattered more than other colors because it travels as shorter smaller waves. This it why we see a blue sky most of the time
Explanation:
I looked it up
Answer:
sun shine
Explanation:
A clear cloudless day-time sky is blue because molecules in the air scatter blue light from the sun more than they scatter red light. When we look towards the sun at sunset, we see red and orange colours because the blue light has been scattered out and away from the line of sight.