Answer:
Every month Earth's moon goes through its phases, waning and waxing in its constant transformation from new moon to full moon and back again. This lunar cycle happens in part because the moon does not produce its own light; the silvery glow we see comes from sunlight reflecting off the moon's monochrome surface.
Identify the error in this statement: “If a reaction transfers energy to the surroundings the product molecules must have more energy than the reactants”
Answer:
See explanation
Explanation:
A reaction may be exothermic or endothermic. In an exothermic reaction, energy is given out from the reaction system. This means that energy is transferred to the surroundings and the reactants have more energy than the products.
A reaction in which energy is absorbed from the surroundings is called an endothermic reaction. In this case, the products have more energy than the reactants.
So the statement "If a reaction transfers energy to the surroundings the product molecules must have more energy than the reactants” is erroneous. The error in the statement is the part that says "...the product molecules must have more energy than the reactants”. It ought to have read, "the reactants have more energy than the products" in accordance with the explanation above.
Calcium is a metal.
Word equations for two reactions of calcium are shown.
calcium + oxygen
→ calcium oxide
calcium + hydrochloric acid → calcium chloride + hydrogen
The equation for the reaction of dilute hydrochloric acid with calcium is
Ca + 2HCl → CaCl2 + H2
Calculate the maximum mass of calcium chloride produced by reacting 8.02 grams of
calcium with excess hydrochloric acid.
relative atomic mass: Ca = 40.1
relative formula mass: CaCl2 = 111.1
Show your working.
Answer:
22.22 g
Explanation:
The balanced reaction equation is;
Ca(s) + 2HCl(aq) → CaCl2(aq) + H2(g)
Number of moles of calcium reacted = 8.02g/40.1g/mol = 0.2 moles of Calcium
From the reaction equation;
1 mole of Ca yields 1 mole of CaCl2
Hence 0.2 moles of Ca also yields 0.2 moles of CaCl2
Mass of calcium chloride produced = number of moles * molar mass
Mass of calcium chloride = 0.2 moles of CaCl2 * 111.1g/mol = 22.22 g
how can the movement of two plates can cause a trench?
Answer:
they move apart
Explanation:
when two tectonic plates move apart it causes a trench this is most common in oceans
Answer:In particular, ocean trenches are a feature of convergent plate boundaries, where two or more tectonic plates meet. At many convergent plate boundaries, dense lithosphere melts or slides beneath less-dense lithosphere in a process called subduction, creating a trench
Explanation:
why would a pregnant mother need more calcium than a woman her age that is not pregnant?
Besides building teeth and bones, calcium also keeps your blood and muscles moving and helps your nerves send messages from your brain to the rest of your body. Your body can't make calcium, so you need to get it from food or supplements. While you're pregnant, try to get at least 1,000 mg of calcium every day.
Calcium is a vital mineral. Your body uses it to build strong bones and teeth. calcium is also needed for your heart and other muscles to function properly
Im dum.b help
When a grasshopper egg hatches, a baby grasshopper called a pupa comes out of the egg and begins to grow. Although the nymph grasshopper already looks like a grasshopper, it still needs to molt its exoskeleton many times before becoming a full-grown adult."
Which statement corrects the error in the passage?
Question 3 options:
A baby grasshopper is a larva.
A baby grasshopper is a nymph.
The grasshopper nymph hatches.
The nymph has no exoskeleton.
Answer:
2.A baby grasshoper is a nymph.
Explanation:
Answer:
yourinagenjitsulol
Expert
75 answers
3.6K people helped
Answer:
2.A baby grasshopper is a nymph.
Explanation:
i agree
What is the mass of 7.1 x 1021 molecules of glucose?
Answer:
7249.1
Explanation:
Multiply 7.1x1021= 7249.1
9.
Which element is most likely to conduct heat and electricity?
A. Na B. Ca C.P D. Ne
Answer:
A. Na
Explanation:
Sodium is a good conductor of electricity and heat because it has only one electron in its valence shell.
i hope this helps :)
Answer:
C.) P
Explanation:
I believe this is correct, lmk if it's not.
Question 8
The temperature of a gas is 345K. What is this in degrees Celsius?
0 345°C
O 1.26°C
O 72°C
O 618°C
< Previous
HELLPPPPP i need to know ASAPPPPPPPP
what is unique about the intertidal coastline ?
Answer: The intertidal or littoral zone maintains a balance between the land and the sea. It provides a home to specially adapted marine plants and animals.
Explanation: The intertidal zone is the area where the ocean meets the land between high and low tides. A tide pool within Monterey Bay National Marine Sanctuary. Intertidal zones exist anywhere the ocean meets the land, from steep, rocky ledges to long, sloping sandy beaches and mudflats that can extend for hundreds of meters.
Which of these best represents the location of the Earth’s core?
A
the pit of a peach
B
the crust of an apple pie
C
the bread in a peanut butter and jelly sandwich
D
the white of an egg
The best represents the location of the Earth’s core is the pit of a peach. Therefore, option A is correct.
What is earth's core ?The earth core is almost entirely composed of metal, notably iron and nickel, in contrast to the crust and mantle, which are rich in minerals. Iron-nickel alloys found in the core are denoted by their chemical symbols, Ni,Fe. The core also contains siderophile, or substances that dissolve in iron.
The Earth's inner core contains even more metal than the outer core. Both are primarily comprised of iron with a small amount of nickel. However, lighter elements like oxygen, carbon, and silicon are also assumed to be present in small amounts in the iron.
This inner core is around 5,400 degrees Celsius hotter than the Sun's surface. The remaining portion is the liquid outer core of the Earth, which is primarily composed of nickel and iron and has temperatures that are similar to surface temperatures before becoming hotter toward the center.
Thus, option A is correct.
To learn more about earth's core, follow the link;
https://brainly.com/question/3496215
#SPJ6
What role does the vulture playing this food web
Answer:
scavenger- eats dead carcasses
Explanation:
How would you improve your experiment?
answer in 3 to 4 sentence
Answer:i will improve my my experiment by:
1.increasing the validity of that experiment
2.Improving of measurwment techniques
3.reduction of the simple bias
4.Blinding of the experiment
Explanation:
These can be achieved by doing these respectively,
1.Through considering the given time frame feo data collection and the experimental treat
2.Done by ensuring vessels are properly clibrated, are clean and ready to use as well as functioning
3.We can avoid this by doing convenience sampling and again ensuring target population arw properly defined.
4.we can avoid this by alerting the group members on the available group assignments and the data collectors.
How does understanding how to affect the rate of reactions add value to your life? Why is this important for you to understand?
Answer:
because if you do not react to anything you will be a misarable old lady with 5 cats sitting on you .
Explanation: bascially you cant live without reacations to life
Which type of precipitation can be considered acid rain?
Answer:
form of rain, snow, hail, dew, or fog that transports sulfur and. nitrogen compounds from the high atmosphere to the ground
Does a rumor spread faster in a gym where all of
the students can move around freely, or in a classroom where students are
confined to desks? Develop an analogy for the difference in conductivity
between metals and ionic solids.
A rumor spread faster in a classroom where students are confined to desks than in a gym where all of the students can move around freely.
The same applies to conductivity between metals and ionic solids because metals have more close particles.
What is conductivity?Conductivity is the process by which a material is able to transfer electric charge or heat from one point to another without the actual movement of the particles of the substance.
The conductivity of substances varies from one substance to another.
The conductivity of solids is greater than the conductivity of that of other substances.
The conductivity of substances increases with a decrease in the distance between the particles of the substance.
Thus solids that have the closest particles have the highest conductivity.
Liquids have medium conductivity.
Gases have the least conductivity because they have the most spaced-out particles.
Learn more about conductivity at: https://brainly.com/question/24943129
#SPJ1
What determines whether a material melts or burns when heated?
The combustion temperature of a material determines whether a material melts or burns
Materials whose combustion temperatures are lower than their melting point gets burnt instead of melting, because before the temperature of the material is raised up to the melting point temperature, the materials gets combusted at a lower temperature known as the combustion temperature
Melting is physical change and is controlled by the physical property ( melting point ) while burning is chemical change which is irreversible.
Hence we can conclude that The combustion temperature of a material determines whether a material melts or burns
Which plant structures are common to all angiosperms?
spores
flowers
cones
endoskeleton
Answer:
B
Explanation:
5.Apply six atoms of Element A combined with eight atoms of Element B
to produce sic compound particles. How many atoms of Elements A and
B does each particle contain? Are all of the atoms used to form
compounds?
Answer:24
Explanation:axtizent
can someone please help me with this, i'll give you a 5 star rating and the brainliest answer!
Answer:
A. equation
B. atoms
C. products
Explanation:
Answer:
A
A chemical equation shows both the reactants and the products of a chemical equation
In a typical ecosystem, the largest amount of biomass should be found at which level?
A producers
B. primary consumers
C. secondary consumers
O d. tertiary consumers
O E. decomposers
Answer: producers
Explanation:
Why do waves move faster at higher temperatures and in a solid phase?
There is more energy and the particles are farther apart.
There is less energy and the particles are closer together.
There is less energy and the particles are farther apart.
There is more energy and the particles are closer together.
Answer:
Higher temperatures means more energy, and a solid phase means the particles are close together. This results in highly energized particles that bump into the particles close to them, who in turn bump into more particles.
Explanation:
waves move faster at higher temperatures and in a solid phase there is more energy and the particles are farther apart there is less energy and the particles are closer together there is less energy and the particles are farther apart there is more energy and the particles are closer together.
The waves move faster at higher temperatures and in a solid phase because there is more energy and the particles are closer together.
What is wave?A wave can be described as a medium which transports energy without causing net particle movement. Elastic deformation, pressure change, electric along with magnetic intensity, electric potential, or temperature can all be examples.
What is energy?The quantitative property that's also transferred to a body or a physical system, recognizable in the work performance as well as in the form of heat and light, is called energy.
What is temperature?Temperature is the measurement of a body's degree of hotness or coolness.
The faster the wave is conveyed, the greater the particle interactions are. In general, sound travels quicker through solids than through liquids, and faster through liquids than through gas. Because warmer particles move at a higher pace, the temperature actually speeds up to sound.
Therefore, the correct answer will be option (d).
To more about wave and energy .
https://brainly.com/question/9624826.
#SPJ2
Is carbon Dioxide matter????
Answer:Yes
Explanation: Matter is everything around you.
Please help! I really need help on this!
Answer:
I wanna say c
Explanation:
It makes the most sense, because non-metals don't produce an electrical current, and therefore aren't conductors.
Unbend a paper clip such that
you have
a long, straight piece of metal. Bend one of the initially straight sections
back and forth several times. Does it become easier or harder to bend
the paper clip in the same spot? What happens if you keep bending the
paper clip back and forth?
uz RS nyodag
Metals have a crystalline in nature, and a consistent shift in stress causes the structure to alter, causing the metal to stiffen and fracture. This is known as metal fatige. The bending causes that to occur.
What is metal ?A metal is a substance that has a shiny look when freshly processed, polished, or shattered, and conducts electricity and heat rather effectively. Generally speaking, metals are malleable and ductile.
These characteristics are the outcome of the metallic link that exists between the metal's atoms or molecules.
The earth's crust is where most pure metals are found. They are discovered in ores, which are solid materials from which metals and minerals may be extracted. The majority of the planet's iron mass, which makes up over a third of its mass, is located in its core.
Thus, Metals have a crystalline in nature, and a consistent shift in stress causes the structure to alter.
To learn more about metal, follow the link;
https://brainly.com/question/18153051
#SPJ2
PLSSS HELP ME
1) Which of these bonds is most easily broken?
1. All are equally easy to break
2. Hydrogen Bond
3. Ionic Bond
4. Covalent Bond
2)Hydrogen bonds are formed due to ______.
1. Electromagnetic attraction
2. Sharing of electrons
3. Stealing of electrons
4. 'Stickiness' due to protons and neutrons
3) What is a polar molecule?
1. A molecule found either at the north or south pole
2. A molecule with a positively charged end and a negatively charged end
3. A molecule with a distinct beginning and end
4. Any molecule that includes oxygen
4)Water tension is an example of ______.
1.Oxygen bonding
2.Hydrogen bonding
3.Isometric bonding
4. Covalent bonding
Answer:
1. 2)Hydrogen Bond
2. 1)Electromagnetic attraction
3. 2) A molecule with a positively charged end and a negatively charged end
4. 2.Hydrogen bonding
* i think i am right and i really hope so but please dont
count it against me babe.
explanation:
Individual hydrogen bonds are weak and easily broken; however, they occur in very large numbers in water and in organic polymers, creating a major force in combination. Hydrogen bonds are also responsible for zipping together the DNA double helix.
A hydrogen bond is formed when the positive end of one molecule is attracted to the negative end of another. The concept is similar to magnetic attraction where opposite poles attract. Hydrogen has one proton and one electron. This makes hydrogen an electrically positive atom because it has a deficiency of electrons.
A polar molecule is a chemical species in which the distribution of electrons between the covalently bonded atoms is not even. Some chemical species, such as chains of carbon molecules, share electrons equally and are said to be nonpolar molecules
Water molecules forming hydrogen bonds with one another. The partial negative charge on the O of one molecule can form a hydrogen bond with the partial positive charge on the hydrogens of other molecules. Water molecules are also attracted to other polar molecules and to ions.
________ cm = 3.34 m
Answer:
334
Explanation:
multiply the length value by 100
Started: Feb 22 at 92
Quiz Instructions
Question 2
e
lon Chart
If the standard pressure in a car tire is 38 psi, what is the force exe
the tire if the area of the tire is 12 cm by 18 cm? Round your answ
pound.
Answer:
1272 pound
Explanation:
From the question given above, the following data were obtained:
Pressure (P) = 38 psi
Area (A) = 12 cm by 18 cm
Force (F) =?
Next, we shall determine the area. This can be obtained as follow:
Area (A) = 12 cm by 18 cm
A = 216 cm²
Next, we shall convert 216 cm² to square inch (in²). This can be obtained as follow:
1 cm² = 0.155 in²
Therefore,
216 cm² = 216 cm² × 0.155 in² / 1 cm
216 cm² = 33.48 in²
Finally, we shall determine the force exerted. This can be obtained as follow:
Pressure (P) = 38 psi = 38 lbf/in²
Area (A) = 33.48 in²
Force (F) =?
P = F/A
38 = F / 33.48
Cross multiply
F = 38 × 33.48
F = 1272 pound
Thus, the force exerted is 1272 pound
yoo someone help please
Answer: can I suck your super long di ck or titis
Explanation:
Answer:
hi
Explanation:
6. Which of the following best describe the graph of linear inequalities in two
variables?
A. Straight line
C. Half-plane
B. Parabola
D. Half of a parabola
7. Which of the following inequalities is represented by the given
graph?
A. 2x + 2y > 2
C. 3x + 2y > 2
B. 3x + 2y = 2
D. 3x - 2y < 2
1
8. An inequality using a < or > has a line.
A. horizontal
C. solid
B. broken
D. vertical(h).
9. Which is the correct inequality for the shaded region?
A. y = - x - 1
C. y > -x - 1
B. y <- x + 1
D.y > x - 1
10.What type of line and what way would you shade with the sign "<"?
A. broken, shaded up
C. broken, shaded down
B. solid, shaded up
D. solid, shaded down
11. Given the graph of y? 2x - 5 below, which of the following
ordered pair satisfies the inequality?
A. (2,-5)
C. (-2,-7)
B. (5,2)
D. (5,-7)
I gave brainlest ...
Answer:
I hope I can help youExplanation:
I hope I can help youAs per the following graph that best describes the linear inequality in two variables is included in a straight line.
The linear inequality divided the coordinates plane into two halves. Here one half represents the solution and the other the inequality. Hence the option A is correct. The inequality that is represented by the graph is 3x + 2y = 2, Hence option B is correct. The correct inequality for the shaded region is y <- x + 1, hence the option C is correct. The line and shade with the sign "<" means that they are broken and shaded up. Hence the option A is correct. The given graph consists of equation 2x - 5 where to find Y in order of the pairs that satisfy the inequality are (5,2) hence the option B is correct.Learn more about which of the following is best described.
brainly.ph/question/8809815.