Ice is not a metamorphic rock.
Metamorphic rocks are rocks that have undergone a change in their physical and/or chemical composition due to exposure to heat, pressure, or other agents of metamorphism.
As heat or pressure transform solid rock from one form into a new, denser type, metamorphic rock is created in its entirety. As minerals (in this case, ice) rearrange to produce new crystalline forms, a shift takes place. The important thing for glacial ice during this transition is that it doesn't turn into liquid water.
Ice, on the other hand, is simply frozen water and does not undergo any changes in composition. It can change its physical state from solid to liquid and back again, but it does not undergo metamorphism. Therefore, it is not classified as a metamorphic rock.
To know more about metamorphic rock here:
https://brainly.com/question/19930528#
#SPJ11
How do you find the current position of planets in a birth chart?
Answer:
Explanation:
Gather information on the exact place and time of your birth.
Choose a Western birth chart calculator for the simplest approach.
Try a Eastern sidereal calculator for a deeper dive into planetary cycles.
Enter your time and place of birth into the calculator.
Study what each planet means.
what is concentration chemistry definition
In chemistry, concentration refers to the amount of a substance in a defined space.
Concentration, in chemistry is often measured in moles per liter (mol/L) or grams per liter (g/L) and is used to describe the strength of a solution or the amount of a solute in a solvent.
Concentration can also be expressed as a percentage or as parts per million (ppm). It is an important concept in chemistry, as it can affect the rates of chemical reactions and the properties of solutions.
By understanding concentration, chemists can accurately measure and control the amounts of substances in a solution, allowing them to make accurate predictions about the behavior of the solution.
To know more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
A small block has constant acceleration as it slides down a frictionless incline. The block is released from rest at the top of the incline, and its speed after it has traveled 7. 80 m to the bottom of the incline is 3. 80 m/s.
The speed of the block at the bottom of the incline is 5.06 m/s.The problem involves a small block sliding down a frictionless incline with constant acceleration.
The block is released from rest at the top of the incline, and we are given that the speed of the block after it has traveled 7.80 m to the bottom of the incline is 3.80 m/s. To solve the problem, we can use the equations of motion for constant acceleration, which relate the final velocity (v), initial velocity (u), acceleration (a), distance (s) and time (t) as follows:
v^2 = u^2 + 2as
v = u + at
s = ut + 1/2at^2
Since the incline is frictionless, the only force acting on the block is its weight, mg, where m is the mass of the block and g is the acceleration due to gravity.
Let θ be the angle of the incline, then the component of the weight parallel to the incline is mgsinθ, and the component perpendicular to the incline is mgcosθ. The acceleration of the block down the incline is, therefore, a = gsinθ.
We can now use the given information to solve for the acceleration of the block down the incline. From the second equation of motion, we have:
v = u + at
Since the block is released from rest, the initial velocity u is zero, and we can write:
v = at
Substituting the given values of v = 3.80 m/s and s = 7.80 m, we get:
3.80 m/s = a × 7.80 m
Solving for a, we get:
a = 0.487 m/s^2
Now that we know the acceleration of the block down the incline, we can use the first equation of motion to find the speed of the block at the bottom of the incline:
v^2 = u^2 + 2as
Since the block is released from rest, the initial velocity u is zero, and we can write:
v^2 = 2as
Substituting the known values of v = 3.80 m/s, s = 7.80 m, and a = 0.487 m/s^2, we get:
(3.80 m/s)^2 = 2 × 0.487 m/s^2 × 7.80 m
Simplifying, we get:
v = 5.06 m/s
To learn more about acceleration, visit here
https://brainly.com/question/12550364
#SPJ4
The Nernst represents balance between which two of the following? Permeability Flows due to potential differences Membrane current Flows due to concentration difference Resistance
The Nernst equation represents balance between the two flows due to concentration differences and flows due to potential differences across a cell membrane.
The Nernst equation describes the electrochemical equilibrium potential for an ion across a membrane. It takes into account the concentration gradient and the charge of the ion to calculate the membrane potential at which there would be no net movement of the ion across the membrane due to potential differences. This is the point at which the electrical forces and the chemical forces are equal and opposite, and there is no net flow of ions across the membrane.
The equation is commonly used in the study of ion channels and the resting membrane potential of neurons. It is also used to calculate the equilibrium potentials for different ions in order to determine the direction and magnitude of ion fluxes under different conditions.
The Nernst equation does not directly represent permeability, membrane current or resistance, but these concepts are related to the ion flows and concentration gradients that the equation describes. For example, changes in membrane permeability can alter the concentration gradient across the membrane and thus the Nernst potential for a given ion, while membrane current and resistance are influenced by the movement of ions across the membrane.
To know more about potential differences please refer: https://brainly.com/question/30544638
#SSPJ4
A moving-Coil millammeter gives its full scale deflection for a current of 1mA. The potential difference between its terminals is then 100mV. What resistor placed in series with the meter will limit the current flow to 1mA when 10V is applied across the combination?
The resistor that should be placed in series with the meter to limit the current flow to 1mA when 10V is applied across the combination is 10,000 ohms.
To limit the current flow to 1mA when 10V is applied across the combination, we need to use Ohm's law. Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.
I = V/R
Where I is the current, V is the voltage, and R is the resistance.
We know that the current is 1mA and the voltage is 10V. So, we can rearrange the equation to solve for the resistance:
R = V/I
R = 10V/1mA
R = 10,000 ohms
Therefore, the resistor that should be placed in series with the meter to limit the current flow to 1mA when 10V is applied across the combination is 10,000 ohms.
It's important to note that the potential difference between the terminals of the meter (100mV) is irrelevant in this calculation, as we are only concerned with the voltage and current across the combination of the meter and resistor.
Learn more about the current flow:
https://brainly.com/question/15912115
#SPJ11
find the current that flows through a circuit that has a voltage of 500 decivolts nd a resistance of 28ohms
The current that will flow through the circuit will be 1.7857 amps
Current, voltage and Resistance relationshipOhm's Law describes the relationship between current, voltage, and resistance. This asserts that, given the temperature is constant, the current flowing in a circuit is directly proportional to the applied voltage and inversely proportional to the circuit resistance.
Given Data
Voltage = 500 decivolts
Resistance = 28ohm
Converting decivolts to volts we have
We can get this byn dividing the value by 10
Voltage = 500/10 = 50Volts
Now, we know that the expression relating current, voltage and resistance is given as
V = IR
Substituting our given data we have
50 = I*28
Divide both sides by 28 we have
I = 50/28
I = 1.7857 amps
Learn more about Ohms law here:
https://brainly.com/question/14296509
#SPJ1
A very long solid nonconducting cylinder of radius R0and length ℓ (R0≪ℓ) possesses a uniform volume charge density rhoE(C/m3), figure(Figure 1) .
a). Determine the electric field at points outside the cylinder (R>R0). Do only for points far from the ends and for which R≪ℓ.
b). Determine the electric field at points inside the cylinder (R
Express your answer in terms of the variables rhoE, R0, R, and appropriate constants.
To determine the electric field at points outside the cylinder, we can use Gauss's law, which states that the electric flux through a closed surface is proportional to the charge enclosed by that surface.
How to determine electric field ?For a cylindrical Gaussian surface of radius R and length L>R, the electric flux through the curved part of the surface is:Φ = E * 2πRL
where E is the electric field at any point on the curved part of the Gaussian surface. The electric field is radial and has the same magnitude at all points on the surface. The charge enclosed by the surface is:Q = ρE * πR0^2 * L
where ρE is the volume charge density of the cylinder. Applying Gauss's law:
Φ = Q / ε0
where ε0 is the permittivity of free space. Substituting the expressions we have found:E * 2πRL = ρE * πR0^2 * L / ε0
Solving for E, we get:
E = ρE * R0^2 / (2ε0R)
Therefore, the electric field at points outside the cylinder (R>R0) is given by:
E = ρE * R0^2 / (2ε0R)
b) To determine the electric field at points inside the cylinder, we can again use Gauss's law. For a cylindrical Gaussian surface of radius r<R0, the electric field is zero inside the cylinder, since there is no charge enclosed by the surface. For a cylindrical Gaussian surface of radius R0<r<R, the electric flux through the surface is:Φ = E * 2πrL
where E is the electric field at any point on the curved part of the Gaussian surface. The charge enclosed by the surface is:
Q = ρE * πR0^2 * L * (r/R0)
where (r/R0) is the ratio of the radius of the surface to the radius of the cylinder. Applying Gauss's law:
Φ = Q / ε0
Substituting the expressions we have found:E * 2πrL = ρE * πR0^2 * L * (r/R0) / ε0
Solving for E, we get:
E = ρE * r / (2ε0)
Therefore, the electric field at points inside the cylinder (R0<r<R) is given by:
E = ρE * r / (2ε0)
To know more about electric field , check out :
https://brainly.com/question/14372859
#SPJ4
A projectile is thrown from point P .it moves in such a way that it's distance from point P is always Increasing .find the maximum angle above horizontal with which is thrown .ignore air resistance
The maximum angle above the horizontal with which a projectile can be thrown can be found by considering the concept of range. The range of a projectile is the maximum horizontal distance it can cover before returning to the ground.
The range is maximum when the projectile is thrown at an angle of 45 degrees above the horizontal.
So, the maximum angle above the horizontal with which a projectile can be thrown is 45 degrees. It is worth noting that air resistance can affect the trajectory and the range of a projectile, but as per the problem statement, air resistance has been ignored.
To know more about Projectile:
https://brainly.com/question/28692427
#SPJ4
In a class of 30 students, 15 are taking math and 20 are taking physics. What is the probability that a randomly selected student is taking both math and physics?.
the student is taking both math and physics are 5.
n(A∪B)=n(A)+n(B)−n(A∩B)
30=15+20−n(A∩B)
n(A∩B) = 5
What is a probability simple definition?A probability is a number expressing the possibility or likelihood that a specific event will occur. Probabilities can be defined as proportions with a range of 0 to 1, or as percentages with a range of 0% to 100%.
Why do we study probability?Information about the possibility that something will happen is provided by probability. For instance, meteorologists utilize weather patterns to forecast the likelihood of rain. Probability theory is utilized in epidemiology to comprehend the connection between exposures and the risk of health outcomes.
Hence 5 is the correct answer.
Learn more about probability:
https://brainly.com/question/30034780
#SPJ4
A uniform electric field exists everywhere in the x, y plane. This electric field has a magnitude of 4650 N/C and is directed in the positive x direction. A point charge -8.40 10-9 C is placed at the origin.
(a) Determine the magnitude of the net electric field at x = -0.17 m.
N/C
(b) Determine the magnitude of the net electric field at x = +0.17 m.
N/C
(c) Determine the magnitude of the net electric field at y = +0.17 m.
N/C
(a) The magnitude of the net electric field at x = -0.17 m is 1.01x10^5 N/C.
(b) The magnitude of the net electric field at x = +0.17 m is 1.01x10^5 N/C.
(c) The magnitude of the net electric field at y = +0.17 m is 4650 N/C.
Explanation:
To solve this problem, we can use the formula for electric field due to a point charge and the principle of superposition of electric fields.
The electric field due to a point charge is given by:
E = k*q/r^2
where E is the electric field, k is Coulomb's constant (9x10^9 N m^2/C^2), q is the charge, and r is the distance from the point charge.
(a) To find the net electric field at x = -0.17 m, we need to consider the electric field due to the point charge and the uniform electric field. The distance from the point charge to x = -0.17 m is:
r = sqrt((0.17)^2) = 0.17 m
The electric field due to the point charge at x = -0.17 m is:
E1 = kq/r^2 = (9x10^9 N m^2/C^2)(-8.40x10^-9 C)/(0.17 m)^2 = -1.06x10^5 N/C (in the negative x direction)
The electric field due to the uniform electric field is given by:
E2 = 4650 N/C (in the positive x direction)
The net electric field at x = -0.17 m is the vector sum of E1 and E2:
E_net = E1 + E2 = -1.06x10^5 N/C + 4650 N/C = -1.01x10^5 N/C
Therefore, the magnitude of the net electric field at x = -0.17 m is 1.01x10^5 N/C.
(b) To find the net electric field at x = +0.17 m, we follow the same procedure as in part (a). The distance from the point charge to x = +0.17 m is:
r = sqrt((0.17)^2) = 0.17 m
The electric field due to the point charge at x = +0.17 m is:
E1 = kq/r^2 = (9x10^9 N m^2/C^2)(-8.40x10^-9 C)/(0.17 m)^2 = -1.06x10^5 N/C (in the positive x direction)
The electric field due to the uniform electric field is given by:
E2 = 4650 N/C (in the positive x direction)
The net electric field at x = +0.17 m is the vector sum of E1 and E2:
E_net = E1 + E2 = -1.06x10^5 N/C + 4650 N/C = -1.01x10^5 N/C
Therefore, the magnitude of the net electric field at x = +0.17 m is 1.01x10^5 N/C.
(c) To find the net electric field at y = +0.17 m, we only need to consider the electric field due to the uniform electric field, since the point charge is located on the x-axis. The electric field due to the uniform electric field is given by:
E = 4650 N/C (in the positive x direction)
Therefore, the magnitude of the net electric field at y = +0.17 m is 4650 N/C, in the positive x direction
Learn more about electric field:
https://brainly.com/question/8971780
#SPJ4
An ideal fluid flows through a pipe made of two sections with diameters of 1. 0 and 4. 0 inches, respectively. The speed of the fluid flow through the 4. 0-inch section will be what factor times that through the 1. 0-inch section?.
The speed of the fluid flow through the 4.0-inch section will be 4 times that through the 1.0-inch section.
What is the speed ?The speed is the rate at which something moves or operates, typically measured in units of distance per unit of time, such as miles per hour or meters per second. Speed is a scalar quantity, meaning it has magnitude but not direction. When talking about the speed of an object, the magnitude of its velocity (the rate of change of its position) is being described.
To learn more about speed
https://brainly.com/question/3004254
#SPJ4
Using diameter and radius relations, The factor that times through the 1. 0-inch section is -
[tex]\frac{r1}{r2} ^{2} = \frac{1/2}{2} \\\frac{r1}{r2} ^{2} = 2[/tex]
While the radius of a circle extends from its center to its borders, the diameter of a circle cuts through its center. A circle's diameter effectively divides the shape in half. The diameter and radius of a circle are good buddies since their respective values are equal to each other.
The distance between a circle's center and circumference is known as the radius. The diameter is always twice the radius. As a result, the diameter is multiplied by two to obtain the formula.
From the question we are told that:
Diameter 1 d₁ = 1.0
Diameter 2 d2 = 4.0
Generally the equation for Radius is mathematically given by
At Diameter 1
r₁ = 1/2 inch
At Diameter 2
r₂ = 2 inch
Generally the equation for continuity is mathematically given by
A₁ V₁ = A2V2
Therefore
[tex]\frac{r1}{r2} ^{2} = \frac{1/2}{2} \\\frac{r1}{r2} ^{2} = 2[/tex]
To learn more about diameter and radius from given link
https://brainly.com/question/24241632
#SPJ4
Pls help
2. What is the pressure of a gas that exerts a 200 N force over an area of 50 square meters?
The pressure of the gas is 40 N/m².
What is the pressure of a gas?The pressure of a gas is defined as the amount of force exerted by the gas molecules per unit area.
Here,
The force exerted by the gas = 200 N
The area under which the force is exerted = 50 m²
Therefore,
Pressure of the gas = Force exerted/ Area
P = F/A
P = 200/50
P = 40 N/m²
Hence,
The pressure of the gas that exerts 200N force over an area of 50 m² is 40 N/m².
To learn more about Pressure of gases, click:
https://brainly.com/question/12242531
#SPJ1
wood pellets are produced from the waste sawdust of lumber and paper mills. home-heating stoves burning these pellets can heat homes directly, instead of relying on other energy sources. heating your home with wood pellets is:_________
Heating your home with wood pellets is option (a) sustainable, less polluting, and about 3 times as efficient as heating a home using electricity from a coal-fired power plant
Wood pellets are a renewable energy source, as they are made from waste sawdust that would otherwise be discarded. This makes them a sustainable option for home heating. Burning wood pellets also produces less pollution than burning fossil fuels, as wood is a carbon-neutral fuel. In comparison, electricity generated from coal-fired power plants is a significant contributor to air pollution and greenhouse gas emissions.
Moreover, wood pellets are about three times as efficient as heating a home using electricity from a coal-fired power plant. This is because wood pellets have a higher energy density than coal and are easier to transport and store. This increased efficiency means that heating with wood pellets can save homeowners money on their energy bills, as well as reduce their environmental impact.
Therefore, correct option is (a) sustainable, less polluting, and about 3 times as efficient as heating a home using electricity from a coal-fired power plant
Learn more about renewable energy source here
brainly.com/question/29440917
#SPJ4
The give question is incomplete, the complete question is:
Wood pellets are produced from the waste sawdust of lumber and paper mills. Home-heating stoves burning these pellets can heat homes directly, instead of relying on other energy sources. Heating your home with wood pellets is :
(a) sustainable, less polluting, and about 3 times as efficient as heating a home using electricity from a coal-fired power plant.
(b) sustainable, slightly more polluting, and is about 30% more efficient than using electricity from a coal-fired power plant.
(c) not sustainable but is less polluting and is about as efficient as using electricity from a coal-fired power plant.
(d) not sustainable and actually pollutes more than using electricity from a coal-fired power plant
Find the average speed of a dog if he walks 30 meters to the right and then turns and walks 10 meters to the left in 1 minute. Round to two decimal places, and include both magnitude and direction
The average speed of the dog is 40.00 meters/minute to the right.
To find the average speed of the dog, we need to use the formula for speed, which is:
Speed = Distance / Time
First, let's find the total distance that the dog walked. The dog walked 30 meters to the right and then 10 meters to the left, so the total distance is:
Distance = 30 meters + 10 meters = 40 meters
Next, let's plug in the values into the formula for speed:
Speed = 40 meters / 1 minute = 40 meters/minute
Now, let's round the speed to two decimal places:
Speed = 40.00 meters/minute
The magnitude of the speed is 40.00 meters/minute, and the direction is to the right.
Learn more about The magnitude of the speed:
https://brainly.com/question/28861519
#SPJ11
A frictionless curve of radius 100 m, banked at an angle of 45 degrees, may be safely negotiated at a speed of m/s Mark for Review
Answer:
31 meter per second
Explanation:
Now r is the radius which is 100 meters. G is 9.8 and theta is equal to 45 degrees. From this, we get the speed equal to 31 meter per second. This is the required speed, and this completes the solution
Dev is trying to figure out what kind of career he wants. He knows that he does not want to be stuck behind a desk. He has always been a bit of a foodie and loves to entertain his friends with delicious dishes. Based on this information, which would be the BEST thing for him to major in at college? A. Physics B. Education C. Hospitality D. Criminal justice
Based on the information provided, the BEST major for Dev to pursue would be Hospitality.
What is force?Force is a physical quantity that describes the interaction between two objects or systems. It is a vector quantity, which means that it has both magnitude and direction. Force can cause an object to accelerate, change direction, or deform. Force is typically measured in units of Newtons (N) in the International System of Units (SI). One Newton is defined as the force required to accelerate a mass of one kilogram at a rate of one meter per second squared. In other systems of measurement, such as the British system, force may be measured in units such as pounds or ounces. Some common examples of forces include gravity, friction, electromagnetic forces, and applied forces such as pushing or pulling. Understanding the concept of force is important in many areas of physics, engineering, and other sciences, as it helps explain how objects interact with each other and how they move and change over time.
Here,
This major would allow him to explore his passion for food and entertaining while also providing opportunities for hands-on experience and creativity. A degree in Hospitality can lead to careers in the food and beverage industry, hotel management, event planning, and more, all of which would offer the chance to work in dynamic, interactive environments rather than being stuck behind a desk all day.
To know more about force,
https://brainly.com/question/29044739
#SPJ1
Convert 74°F to °C using the following formula °C = 5/9 (°F-32)
Answer:
Your answer to your question is: 23.33333
( The decimal three is infinite :) )
How to convert fahrenheit to celsius?
First: To convert 74 f to c, you should remember that f equals a c minus 74 into 32 then multiply final value to 5/9.
Second: First, minus 74 into 32 and then finaly multiply to 5/9.
Third: Applying to formula - (74 - 32)*5/9 is equal to 23.33.
Fourth: Hence, the answer is 74 f = 23.33 c.
(sorry I'm bit late )
Thus, your answer is 23.33333
the specific heat of copper is 0.385 j/g °c. how much thermal energy is required to increase the temperature of a 20g sample of copper from 20°c to 50°c?
The amount of thermal energy required to increase the temperature of a 20g sample of copper from 20°C to 50°C is 231 J.
What is thermal energy?The entire quantity of kinetic energy found in the particles of an object or material is referred to as thermal energy. It is a type of energy connected to atomic and molecular motion within a substance. Conduction, convection, and radiation are a few examples of mechanisms that can be used to transmit this energy from one item to another. An object's thermal energy content is inversely related to its temperature, with higher temperatures denoting a higher thermal energy content. Through the transformation of heat energy into mechanical energy, thermal energy is employed in a variety of processes, including heating houses, preparing food, and creating electricity.
The amount of thermal energy required to increase the temperature of a substance can be calculated using the following formula:
Q = m x c x ΔT
Where:
Q = amount of thermal energy in Joules (J)
m = mass of the substance in grams (g)
c = specific heat capacity of the substance in J/g°C
ΔT = change in temperature in °C (final temperature - initial temperature)
Using the values given in the problem, we can calculate the amount of thermal energy required to increase the temperature of a 20g sample of copper from 20°C to 50°C:
Q = 20g x 0.385 J/g°C x (50°C - 20°C)
Q = 20g x 0.385 J/g°C x 30°C
Q = 231 J
To know more about thermal energy, check out:
https://brainly.com/question/7541718
#SPJ4
The amount of thermal energy required to increase the temperature of a substance can be calculated using the following formula:
Q = m x c x ΔT
Where:
Q = amount of thermal energy in Joules (J)
m = mass of the substance in grams (g)
c = specific heat capacity of the substance in J/g°C
ΔT = change in temperature in °C (final temperature - initial temperature)
Using the values given in the problem, we can calculate the amount of thermal energy required to increase the temperature of a 20g sample of copper from 20°C to 50°C:
Q = 20g x 0.385 J/g°C x (50°C - 20°C)
Q = 20g x 0.385 J/g°C x 30°C
Q = 231 J
Therefore, the amount of thermal energy required to increase the temperature of a 20g sample of copper from 20°C to 50°C is 231 J.
What is the difference between centrifugal force and centripetal force aviation?
Centrifugal force is the fictitious force perceived during a circular motion, while centripetal force is the force imposed on the body.
A fictitious force that moves in a circle and is directed away from the centre of the circle is called centrifugal force. When measurements are taken in an inertial frame of reference, the force does not exist. It only becomes relevant when we go from a ground/inertial reference frame to a spinning reference frame.
The component of force applied on an object in curvilinear motion that is pointed in the direction of the axis of rotation or the centre of curvature is known as the centripetal force.
To know more about centripetal force, visit,
https://brainly.com/question/20905151
#SPJ4
To degrade or destroy keratinocytes means something is Keratolytic, just like something that degrades proteins can be said to be proteolytic
To degrade or destroy keratinocytes means something is Keratolytic, just like something that degrades proteins can be said to be proteolytic
True
False
The statement given, Degrading or destroying keratinocytes means that something is keratolytic, just as something that degrades proteins can be said to be proteolytic, is True.
Similarly, proteolytic refers to the ability to degrade or destroy proteins. Both terms are used to describe substances or processes that can break down these specific types of cells or molecules.
These enzymes are naturally produced by the body, but can also be found in some bacterial species. Keratolytic substances, on the other hand, are used to break down or destroy the keratinocytes, which are the outermost layer of skin cells. These compounds are often used in skin care products to exfoliate the skin and remove dead skin cells.
Learn more about keratinocytes:
https://brainly.com/question/22984608
#SPJ11
Why Is The Electric Field Inside A Conductor Zero
Because conductors are made of materials that permit charges to circulate freely throughout their structure, the electric field inside one is zero. Charges inside a conductor will redistribute themselves when an electric field is applied, resulting in a zero electric field inside the conductor.
Electrostatic equilibrium is produced when the charges in a conductor move in a way that cancels the electric field. As the electric field is not zero and is perpendicular to the surface, any excess charge on a conductor will be located there. This "Faraday cage effect" is what gives conductors their ability to shelter electrical equipment from outside electric fields.
To know more about Electrostatic equilibrium, here,
https://brainly.com/question/18559581
#SPJ4
A ball of mass 0.4 kg, initially at rest, is kicked directly toward a fence from a point 20 m away, as shown below. The velocity of the ball as it leaves the kicker’s foot is 17 m/s at an angle of 42 ◦ above the horizontal. The top of the fence is 5 m high. The ball hits nothing while in flight and air resistance is negligible. the acceleration due to gravity is 9.8 m/s
1. Determine the time it takes for the ball to reach the plane of the fence.
Answer in units of s.
2. How far above the top of fence will the ball
pass? Consider the diameter of the ball to be
negligible.
3. What is the vertical component of the velocity
when the ball reaches the plane of the fence?
Answer in units of m/s.
Time taken is 1.65s, height is 17.5m and velocity is 4.3 m/s.
1)
To determine the time it takes for the ball to reach the plane of the fence, we need to find the horizontal component of the initial velocity.
Using trigonometry, we can find that the horizontal component is v₀ cos(42°) = 17 m/s × cos(42°) ≈ 12.13 m/s. Then, we can use the equation for horizontal distance, d = vt, where d is the distance, v is the velocity, and t is time. Solving for t, we get t = d/v = 20 m / 12.13 m/s ≈ 1.65 s.2)
To find how far above the top of the fence the ball will pass, we need to find the maximum height it reaches.
We can use the kinematic equation for vertical displacement, Δy = v₀y t + (1/2)at², where v₀y is the initial vertical component of velocity and a is acceleration due to gravity. Since the ball is initially at rest vertically, v₀y = 0. Solving for Δy, we get Δy = (1/2)at² = (1/2)(9.8 m/s²)(1.65 s)² ≈ 12.5 m. Thus, the ball will pass 12.5 m + 5 m = 17.5 m above the ground.3) The vertical component of velocity when the ball reaches the plane of the fence can be found using the kinematic equation for vertical velocity, v = v₀y + at.
We know that a = -9.8 m/s² (since acceleration due to gravity is downward) and t = 1.65 s (from part 1). We also know that the initial vertical component of velocity is v₀ sin(42°) = 17 m/s × sin(42°) ≈ 11.4 m/s. Plugging in these values, we get v = 11.4 m/s + (-9.8 m/s²)(1.65 s) ≈ -4.3 m/s. The negative sign indicates that the ball is moving downward at this point.To know more about kinematics visit:
https://brainly.com/question/28918670
#SPJ1
an electric current of 50 amperes constantly flows through a copper wire 0.5 meters long, the wire is in a homogeneous magnetic field, the direction of the magnetic induction is normal to the direction of the wire, if the intensity of the magnetic induction is one Tesla, calculate the intensity of the ampere force acting on the conductor
If an electric current of 50 amperes constantly flows through a copper wire 0.5 meters long, the wire is in a homogeneous magnetic field. The intensity of the ampere force acting on the conductor is: 25N.
How to find the intensity of the ampere force?The intensity of the ampere force (also known as the Lorentz force) acting on a conductor in a magnetic field can be calculated using the following formula:
F = BIL
where:
F= ampere force
B = magnetic induction
I = current
L= length of the conductor
Plugging in the given values:
F = 1 T * 50 A * 0.5 m
F = 25 N
Therefore the intensity of the ampere force acting on the conductor is 25 N.
Learn more about intensity of the ampere force here:https://brainly.com/question/12683973
#SPJ1
What is D flip-flop truth table?
A D flip-flop is a type of digital logic circuit that stores a single bit of information. The output of the D flip-flop changes only when the clock input changes, and it is determined by the value of the data input at that time.
A D flip-flop, or data flip-flop, is an electronic circuit that stores a single bit of digital data. It has two inputs: a data input (D) and a clock input (CLK), as well as two outputs: a normal output (Q) and a complemented output (Q’). The output Q represents the stored value of the D input, which is transferred to the output on the rising edge of the clock signal. The Q’ output is the inverse of Q.
When the CLK signal is low, the D input is ignored and the output Q holds its previous value. When the CLK signal goes high, the D input is sampled and its value is transferred to the output Q. This makes the D flip-flop useful for synchronizing data between different clock domains or for controlling the timing of a circuit.
To learn more about D flip-flop visit here:
brainly.com/question/30557048
#SPJ4
An object moving in simple harmonic motion has an amplitude of 0. 07 m and a maximum acceleration of 50 m/s2. What is the frequency of the system?.
Answer:
Approximately [tex]42\; {\rm Hz}[/tex].
Explanation:
Let [tex]A[/tex] denote the amplitude and let [tex]f[/tex] denote the frequency of this Simple Harmonic Motion (SHM.) Assume that displacement is [tex]0[/tex] at time [tex]t = 0[/tex].
The displacement of this SHM oscillator at time [tex]t[/tex] can be modelled with the sine function:
[tex]x(t) = A\, \sin((2\, \pi\, f)\, t)[/tex].
Apply the chain rule to differentiate displacement [tex]x(t)[/tex] with respect to time to find velocity [tex]v(t)[/tex]:
[tex]v(t) = (2\, \pi\, f)\, A\, \cos((2\, \pi\, f)\, t)[/tex].
Differentiate velocity [tex]v(t)[/tex] with respect to time to find acceleration [tex]a(t)[/tex]:
[tex]a(t) = -(2\, \pi\, f)^{2}\, A\, \sin((2\, \pi\, f)\, t)[/tex].
Note that as long as [tex]x(t) \ne 0[/tex]:
[tex]\begin{aligned}\frac{a(t)}{x(t)} &= \frac{-(2\, \pi\, f)^{2}\, A\, \sin((2\, \pi\, f)\, t)}{A\, \sin((2\, \pi\, f)\, t)} = -(2\, \pi\, f)^{2}\end{aligned}[/tex].
In other words, as long as [tex]x(t) \ne 0[/tex], the ratio between [tex]x[/tex] and [tex]a[/tex] would be equal to [tex](-1)\, (2\, \pi\, f)^{2}[/tex].
The amplitude [tex]A[/tex] of an SHM is the maximum value of displacement [tex]x[/tex]. Additionally, the magnitude of acceleration [tex]a[/tex] is maximized whenever displacement [tex]x[/tex] is maximized.
In other words, when displacement is maximized, [tex]x = A = 0.07\; {\rm m}[/tex]. The magnitude of acceleration at that moment would also be maximized: [tex]|a| = 50\; {\rm m\cdot s^{-2}}[/tex].
Since [tex]x > 0[/tex] and the direction of acceleration is opposite to that of displacement, [tex]a < 0[/tex]. Therefore, [tex]a = (-50)\; {\rm m\cdot s^{-2}}[/tex].
Since [tex]x \ne 0[/tex], [tex](-1)\, (2\, \pi\, f)^{2} = a / x[/tex]. Therefore:
[tex]\begin{aligned}f &= \frac{1}{2\, \pi}\, \sqrt{-\frac{a}{x}} \\ &= \frac{1}{2\, \pi}\, \sqrt{-\frac{(-50)}{0.07}}\; {\rm s^{-1}} \\ &\approx 42\; {\rm Hz}\end{aligned}[/tex].
where did constellations come from
In astronomy, a constellation is any of a specific collection of stars that, at least in the minds of people who named them, were thought to resemble recognizable figures or creatures in the sky.
Constellations are groupings of stars that have been identified and named by humans. The practice of identifying constellations dates back to ancient civilizations, such as the Babylonians, Greeks, and Romans.
These civilizations used constellations as a way to tell stories, track the seasons, and navigate. Each civilization had their own names and stories for the constellations, but many of the names and stories we use today come from the ancient Greeks.
For example, the constellation Orion is named after a hunter in Greek mythology, and the constellation Leo is named after the lion that was killed by the Greek hero Hercules. Overall, constellations are a human creation that have been used for various purposes throughout history.
To know more about constellation here:
https://brainly.com/question/18312623#
#SPJ11
if you are told that a 20 kilogram object is raised by 10 meters, you know that?a the force of gravity on the object is 20 kilograms. b the mass of the object is 20 kilograms. с the force of gravity on the object is 10 meters. d the mass of the object is 10 meters. e the acceleration of the object is 200 kilogram-meters
The correct answer is (b) the mass of the object is 20 kilograms. When an object is raised to a certain height, work is done on the object against the force of gravity, and the object gains potential energy.
When a 20 kilogram object is raised by 10 meters, it gains gravitational potential energy, which is given by the formula:
Potential energy = mgh
where m is the mass of the object, g is the acceleration due to gravity, and h is the height that the object is raised.
Substituting the given values, we get:
Potential energy = (20 kg) x (9.81 m/s^2) x (10 m) = 1962 J
This means that 1962 J of work was done on the object against the force of gravity to raise it to a height of 10 meters. The force of gravity on the object remains constant at 20 kg (mass) x 9.81 m/s^2 (acceleration due to gravity) = 196.2 N, regardless of its height.
Since the object is lifted vertically and is at rest at the top of its ascent, no work is done against horizontal forces. Therefore, the force of gravity on the object remains constant at 20 kg (mass) x 9.81 m/s^2 (acceleration due to gravity) = 196.2 N.
Thus, the correct statement is that the mass of the object is 20 kilograms.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ4
How much kinetic energy does a 75 kg cheetah have running after an antelope at 25.8 m/s?
(Show work please)
The kinetic energy of the cheetah will be 24961.5 J.
What is kinetic energy?An object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a given velocity. The body retains its kinetic energy after gaining it during acceleration unless its speed changes.
Given that a 75 kg cheetah has running after an antelope at 25.8 m/s. The kinetic energy will be calculated as:-
KE = 1/2 mv²
KE = 1/2 x 75 x (25.8)²
KE = 24961.5 J
Therefore, the value of the kinetic energy will be 24961.5 J.
To know more about kinetic energy follow
https://brainly.com/question/25959744
#SPJ1
Rank the types of radiation in order of their energy, from least to greatest.
left to right on spectrum
less wavelength/ greatest energy
purple (gama rays)
blue (X-rays)
blue/green (ultraviolet)
rainbow (visible light)
yellow (infrared)
orange (mircrowave)
red (FM-Radio-AM)
longest wave length/ lower energy
least energy
Radio waves
infrared
red visible light
blue visible light
X-rays
gamma rays
Most energy
A source can emit energy in the form of electromagnetic waves or particles, which are referred to as radiations. They come in a variety of forms, including cosmic radiation, X-rays, ultraviolet rays, microwaves, radio waves, alpha, beta, and gamma particles, and can be either man-made or natural.
Ranking the types of radiation in order of their energy:
left to right on spectrum
less wavelength/ greatest energy
purple (gamma rays)
blue (X-rays)
blue/green (ultraviolet)
rainbow (visible light)
yellow (infrared)
orange (microwave)
red (FM-Radio-AM)
longest wavelength/ lower energy
least energy
Radio waves
infrared
red visible light
blue visible light
X-rays
gamma rays
What are radiations?
On living things, these radiations can have both advantageous and detrimental consequences. For instance, the sun's UV rays are necessary for humans to produce vitamin D, but too much exposure can result in skin cancer. Ionizing radiation, on the other hand, can alter DNA, which can result in cancer or genetic flaws. Therefore, the study of radiation is crucial for many industries, such as nuclear energy, astronomy, and medicine.
To know more about radiation, check out:
brainly.com/question/29656100
#SPJ1
(II) The specific heat at constant volume of a particular gasis 0.182 kcal/kgâKkcal/kgâK at room temperature, and its molecularmass is 34 . (a) What is its specific heat at constant pressure?(b) What do you think is the molecular structure of this gas?
a) The specific heat at constant pressure of the gas is approximately 0.202 kcal/kg-K.
b) It is not possible to determine the molecular structure of a gas based on its specific heat alone.
What is Constant Pressure?Constant pressure refers to a condition in which the pressure of a system remains constant, regardless of changes in the volume or temperature of the system. In thermodynamics, constant pressure is often used as one of the conditions that can be imposed on a system in order to study the relationship between the pressure, volume, and temperature of the system.
In a constant pressure process, the pressure of the system remains the same, and changes in the volume of the system cause changes in the internal energy of the system. For example, in an ideal gas, if the pressure of the gas is kept constant, an increase in the volume of the gas will cause the temperature of the gas to decrease, and a decrease in the volume of the gas will cause the temperature of the gas to increase.
Constant pressure is an important concept in thermodynamics and is used in a variety of applications, including the design of engines and the analysis of energy systems.
a) The specific heat at constant pressure of a gas can be calculated using the equation:
Cp = Cv + R
where Cp is the specific heat at constant pressure, Cv is the specific heat at constant volume, and R is the specific gas constant. The value of R for one mole of gas is typically around 8.31 J/mol-K.
Given that the specific heat at constant volume is 0.182 kcal/kg-K and the molecular mass is 34, we can calculate the specific heat at constant pressure as follows:
Cp = Cv + R
Cp = 0.182 kcal/kg-K + (8.31 J/mol-K / 4184 J/kcal)
Cp = 0.182 + (8.31 / 4184)
Cp = 0.182 + 0.01976
Cp = 0.20176 kcal/kg-K
Therefore, the specific heat at constant pressure of the gas is approximately 0.202 kcal/kg-K.
b) It is not possible to determine the molecular structure of a gas based on its specific heat alone. The specific heat of a gas is a measure of the amount of heat required to raise the temperature of a unit mass of the gas by a certain amount, and it is influenced by the number of atoms in the gas, the type of bonds between the atoms, and the mass of the atoms. To determine the molecular structure of a gas, other methods such as spectroscopy or X-ray crystallography must be used.
To know more about Constant Pressure, visit:
https://brainly.com/question/2139620
#SPJ4