Answer:
An ideal gas is a gas with particular characteristics.
Explanation:
The particles have no volume All collisions between particles are elastic collisions and lose no kinetic energy The particles neither attract each other nor repel They have random movementIdeal gases are hypothetical which means that they do not exist in their true form.
hope this helps, pls mark brainliest :D
A student uses a magnet to move a 0.25kg metal ball. The magnet exerts a force of 5N on the ball. What is the acceleration of the ball when it begins to move ?
Answer:
20 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{5}{0.25} \\ [/tex]
We have the final answer as
20 m/s²Hope this helps you
Once a ball is hit and no longer touches the mallet, it continues moving.
What causes the ball to continue moving?
please help !!!!!!!!!!!
Answer:
Iron wood is very dense and will sink in water. B
Explanation:
Hope this helps!!
Answer:
B
Explanation:
3. What mass of water vapor condenses if 435 kJ of heat are released in the process? a a 10.79 b 982 g C 1.30 x 10 g d 1939
Mass of water vapor = 193 g
Further explanationGiven
435 kJ of heat are released
Required
mass of water vapor
Solution
The heat to change the phase can be formulated :
Q = mLf (melting/freezing)
Q = mLv (vaporization/condensation)
Lv for water = 2256 kJ/kg or 2256 J/g or 40.7 kJ/mol
So the mass of water vapor :
[tex]\tt m=\dfrac{Q}{Lv}\\\\m=\dfrac{435000~J}{2256~J/g}\\\\m=192.8\approx 193~g[/tex]
A ______ square is a diagram used to predict all possible allele combinations from a genetic ______. Using this diagram, the phenotypes of offspring can be determined from the genotypes.
Answer:
A Punnet Square...the second I am not sure.
Explanation:
Unfortunately the second could be many things. You'd have to have more background information.
Answer:
PUNNETT....,MAKE SURE U HAVE 2 T,s
Explanation:
punnett and cross
What is the main motivation for Hindus to follow the beliefs of their religion correctly?
Answer:
B
Explanation:
Answer:
b
Explanation:
Please help me!!!!!!!it is about elements on the periodic table. Please help!!!!!
Answer:
a\c enables the protons so therefore we duplicate the neutrons making for the first one 80 squared then subtracted by 201 and then do that for all
please help ASAP ty :)
Answer:
c or d it measures smallest to biggest and biggest to smallest
Answer:
your answer is a
Explanation:
Use the drop-down menus after each statement to identify the dry climate region being described.
v climates feature hot summers and cold winters, dividing the climate into sharply contrasting
seasons.
v climates are characterized by very little rainfall, hot summers, and mild winters.
v climates have annual precipitation between 15 and 25 inches.
Semiarid climate regions have areas of grasslands, called
steppes.
Answer:
✔ semiarid
✔ desert
✔ semiarid
✔ steppes
.
Explanation:
The deserts and steppes comprise the regions that are characterized by dry climates. The dry climates are characterized by very little rainfall, hot summers, and mild winters. The correct option is B.
What is a dry climate?The areas which are very dry and where the water escapes and leaves the area drier than other places is known as the dry climate. Most dry climates have summers very hot, winters cool and warm and the air is very dry.
The main characteristic feature of the dry climate is the low and infrequent rainfall. Arid and semi desert areas have only about 35 cm rainfall per year.
Thus the correct option is B.
To know more about dry climate, visit;
https://brainly.com/question/3623676
#SPJ2
how does reducing the temperature of chemical reaction affect the rate at which it occurs?
Answer:
When you lower the temperature, the molecules are slower and collide less. That temperature drop lowers the rate of the reaction. When you increase the pressure, the molecules have less space in which they can move. That greater density of molecules increases the number of collisions.
Explanation:
would u like to do a zoom?
If u can...
im just bored and my friend fell asleep on me :/
Temperature measures the average kinetic energy of particles of the substances. Therefore, reducing the temperature of chemical reaction reduces rate of reaction.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
When the temperature is reduced, the molecules move more slowly and collide less. The reaction's pace is slowed as the temperature drops. When the pressure is increased, the molecules have much less area to travel in. The number of collisions rises as the density of molecules increases.
Therefore, reducing the temperature of chemical reaction reduces rate of reaction.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ2
in terms of their electron configurations, why is cesium more likely to lose its valence electron than potassium?
use the term “shielding” in your response if possible
Explanation:
use the term electron sheilding, the more electrons between the valence el3ctron and nucleus the easier to lose the valence electron (more sheilding = easier to lose)
It requires energy to melt ice. Applying salt to the ice created a chemical reaction melting the ice. Were did the energy come from to melt the ice? *
Answer:
HOPE IT HELPS...
Explanation:
When added to ice, salt first dissolves in the film of liquid water that is always present on the surface, thereby lowering its freezing point below the ices temperature. Ice in contact with salty water therefore melts, creating more liquid water, which dissolves more salt, thereby causing more ice to melt, and so on
A gas has a volume of 1400 milliliters at a temperature of 20 K and a pressure of 760 mm Hg. What will be the
volume when the temperature is changed to 40 K and the pressure is changed to 380 mm Hg?
A. 350 mL
B. 750 mL
c. 1400 ml
D. 5600 mL
Answer: 1400 mL
Explanation:
The change in volume with change in pressure and change in temperature can be calculated using combination of gas laws. Here, the change in volume is 5600 ml.
What is combined gas laws?Boyle's law, Charles's law and Gay- Lussacs law all relating the temperature, pressure and volume of an ideal gas. The relation between these three parameters from the combination of these laws at conditions is written as:
P1 V1/T1 = P2 V2/ T2.
From this, the change in volume V2 can be calculated.
Given , P1 = 760 mmHg
T1 = 20 k and V1 = 1400 mL.
T2 = 40 k and P2 = 380 mmHg.
The new volume V2 = P1 V1 T2 / T1 P2.
= (760 mmHg × 1400 ml × 40K) / (20 K × 380 mmHg)
= 5600 mL.
Therefore, the change in volume of the gas is 5600 ml.
To find more on combined gas laws, refer here:
https://brainly.com/question/28257995
#SPJ2
Question 9 of 10
Which of the following is the best definition of a chemical change?
A. A change in a substance where a phase change occurs
B. A change in a substance where one or more new substances form
C. A change in a substance where no new substance forms
O D. A change in a substance where energy is conserved
SUBMIT
th
Answer:
B
Explanation:
a chemical change is where two chemicals come in to create a new chemical
Answer:
A change in a substance with no new substances being formed
Explanation:
you're welcome
Suppose you pour a glass of ice water and set it on the kitchen table. After a few minutes, the outside of the glass will be covered with drops of water. Why did this happen?
For condensation to take place there should be noticeable difference between the temperature of the system and the atmosphere. Thus condensation is the reason for clinging of water particles to the side of the glass.
What is condensation?Condensation is a process in which the vapor state converts to liquid state. Condensation is the reverse process of evaporation. Condensation occur at dew point. Dew point is the temperature at which condensation starts.
When the hot air particles collides with the surface of the glass having ice water, then the hot particles that had so much energy or kinetic energy suddenly reduces its energy and converts to water due to the change in temperature and pressure .
Thus condensation is the reason for clinging of water particles to the side of the glass having ice water.
To know more about condensation, here:
https://brainly.com/question/20309509
#SPJ2
If you had a 100 mL of a solution of 0.01 M NaF, how many moles would that solution contain?
Answer:
0.001 mole of NaF.
Explanation:
From the question given above, the following data were obtained:
Volume of solution = 100 mL
Molarity = 0.01 M
Mole of NaF =?
Next, we shall convert 100 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
100 mL = 100 mL × 1 L / 1000 ml
100 mL = 0.1 L
Thus, 100 mL is equivalent to 0.1 L.
Finally, we shall determine the number of mole of NaF present in the solution. This can be obtained as follow:
Volume of solution = 0.1 L
Molarity = 0.01 M
Mole of NaF =?
Molarity =mole /Volume
0.01 = mole of NaF / 0.1
Cross multiply
Mole of NaF = 0.01 × 0.1
Mole of NaF = 0.001 mole.
Thus, 0.001 mole of NaF is present in 100 mL of the solution.
A gas mixture with a total pressure of 745 mmHg contains each of the following gases at the indicated partial pressures: CO2, 125 mmHg; Ar, 214 mmHg; and O2, 187 mmHg. The mixture also contains helium gas. What is the partial pressure of the helium gas
Answer:
219 mmHg
Explanation:
The partial pressure of a gas refers to the pressure exerted by one of the gases in a mixture of gases.
The total pressure of a gas is the sum of all the partial pressures of all the gases in the mixture.
Since the total pressure = 745 mmHg
The partial pressure of helium is;
745 - (125 + 214 + 187)
Partial Pressure of helium gas= 219 mmHg
Can all molecules become all states of matter?
Answer:
Yep i think so.
Explanation:
Pretty sure molecules examples of things in matter...you might wanna double check tho
describe the density of a golf ball
Answer:
the nominal density of a golf ball is to be approximately 0.65 ounces per cubic inch.
Explanation:
What is the ion #for lodine (l)?
Answer:An iodide ion is the ion I−. Compounds with iodine in formal oxidation state −1 are called iodides. This page is for the iodide ion and its salts, not organo iodine compounds. In everyday life, iodide is most commonly encountered as a component of iodized salt, which many governments mandate.
brainliest pls
You are eating dinner with your familiy one night. Your little brother (Who is a disgusting monster ) asked if you likes "seafood?" When you said yes, He proceeded to show you his chewed up, or "See Food". Did a chemical reaction take place, yes or no? What evidence or lack of evidence do you have to support your answer?
Answer:
yes eating the food involves both physical and chemical changes. The chewing of food is a physical change, while the mixing of saliva with food triggers chemical reactions
Explanation:
Once the food mixes with the saliva in our mouth, chemical reactions start taking place in the food, leading to its breakdown and changes in its chemical composition. An evidence of the chemical changes is the taste that we feel when we eat something sweet or sour etc.
Answer:
a chechimal
Explanation:
Which increases along faults and leads to rock breaking? damage earthquake focus stress
A. damage
B. earthquake
C. focus
D. stress
Answer:
Stress
Explanation:
Stress increases along faults and leads to rock breaking. Therefore option D is correct.
Along faults, stress builds up in the rocks due to the movement and interaction of tectonic plates. Stress is the force applied to the rocks, and it can occur in various forms, such as compression, tension, or shear. As the stress increases, the rocks become more strained and are pushed to their breaking point.
When the stress exceeds the strength of the rocks, they can no longer withstand the applied forces and break, resulting in an earthquake. The release of accumulated stress along the fault causes the rocks to rupture and generate seismic waves, leading to ground shaking and the propagation of energy throughout the Earth's crust.
Therefore, stress is the primary factor that increases along faults and ultimately leads to rock breaking and the occurrence of earthquakes.
Know more about tectonic plates:
https://brainly.com/question/16926233
#SPJ2
500 mL of He at 98 kPa expands to 750 mL.
500 mL of He at 98 kPa expands to 750 mL. Find P2.
P₂ = 65.3 kPa
Further explanationGiven
V₁=500 ml
P₁=98 kPa
V₂=750 ml
Required
P₂
Solution
Boyle's Law
At a constant temperature, the gas volume is inversely proportional to the pressure applied
[tex]\rm p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]
Input the value :
[tex]\tt P_2=\dfrac{P_1.V_1}{V_2}\\\\P_1=\dfrac{98.500}{750}\\\\P_2=65.3~kPa[/tex]
what happens when exhaled air passes through clear lime water?
This table shows the pH values of different solutions. A 2-column table with 4 rows. The first column labeled solution has entries W, X, Y, Z. The second column labeled p H has entries 6, 5, 1, 3. Which ranks the solutions from the strongest to weakest acid? W X Y Z Y W X Z W X Z Y Y Z X W
Answer:
D- Y -Z -X -W
:)
The solution with lowest pH are more acidic and those with higher pH values are basic. The given solutions can be ranked from the strongest to weakest acid as Y Z X W.
What is pH?pH of a solution is the measure of its H+ ion concentration. Mathematically it is the negative logarithm of H+ ion concentration of the solution. The acidic solutions contains more H+ ions.
A pH value of 7 represents a neutral solution. The pH above 7 is basic solution and a solution with pH below 7 is acidic in nature. A pH scale can be used to measure the range.
The pH of 1 and 3 indicates strong acidic solutions and 5 and 6 are weakly acidic . The lowest value of pH indicates highest acidity. Therefore, the correct order is Y Z X W.
To find more on pH, refer here:
http://brainly.com/question/2288405
#SPJ2
Find the mass of 7.00 mol of H2O2?
Answer:
238g
Explanation:
Molar Mass (1 mol) of H2O2 = 34.0147 g/mol
7.00 mol = 35.0147*7
= 238.1029g
= 238g (rounded to 3 sig figs because 3 sig figs in 7,00)
Answer:
answer in picture
Explanation:
What is a general rule that you can make that would help you to figure out how to bond ions together
Answer:
metal and non metal-electrovalent
If the name of a compound ends in -ide, we know that the compound is made of __________ elements. What completes the sentence?
Answer:
Two
Explanation:
PLEASE HELP ME MY MOM COMES HOME SOON!! ITS 4AM!!
Blaire is teaching her little brother to ride his bike. She uses 7 N of force to push a 14 kg bike. What is the acceleration?
98 m/s2
0.5 m/s2
21 m/s2
2 m/s2
Answer:
The solution is
Explanation:
a = f/m
a =7/14
a=1/2
a=0.5
Acceleration of bike is 0.5 m/s²
Given that:Force used in push = 7 N
Mass of bike = 14 kg
Find:Acceleration of bike
Computation:Force = Mass × Acceleration
Force used in push = Mass of bike × Acceleration of bike
7 = 14 × Acceleration of bike
Acceleration of bike = 7 / 14
Acceleration of bike = 0.5 m/s²
Learn more:https://brainly.com/question/16685492?referrer=searchResults
An allotrope of carbon that is structured in a sphere is called:
A. fullerene
B. tetrahedron
C. graphite
D. diamond
Answer:
fullerene
Explanation: