What is the answer to this question?

The correct wedge and dash conformation for the following Newman projection is:  IV

The 3D structure of organic molecules is depicted using the wedge and dash conformation. It is frequently used in organic chemistry to display how substituents are oriented around chiral centers. The atoms in this conformation are dots, and the bonds in the molecule are represented by lines. Dashes and wedges depict bonds entering and exiting the paper's or screen's plane, respectively. The atoms' three-dimensional configuration can then be seen by rotating the molecule and looking at the direction of the bonds. Dashes denote the substituent is down and below the ring, whereas wedges denote the substituent is up and above the rings. Predicting the stereochemistry of chemical processes is made easier with the use of this notation.

To know more about wedge and dash conformation, check out:

https://brainly.com/question/20436961

#SPJ1

When you are sweating or shivering, you are exhibiting your limits of tolerance.

The human body can only withstand certain amounts of environmental stress. A key element in defining the body's tolerance limitations is temperature. Only a small range of temperatures is tolerable for the human body, and both hypothermia and hyperthermia can be fatal. Air pressure and humidity both have an impact on how well the body can withstand the environment. Altitude sickness and dehydration are both caused by low air pressure and high humidity, respectively. The body's capacity to endure the environment can also be impacted by pollution and chemical exposure. While exposure to radiation can result in cancer and genetic damage, noise pollution can also induce stress and hearing loss. Overall, a complex interplay of many environmental influences affects the human body's tolerance thresholds.

To know more about the limits of tolerance, check out:

https://brainly.com/question/26145317

#SPJ1

The matching of likely structure of the ion responsible for the base peak at 105, 72, 198,200, 91 and 43 differently.

The explanation and matching structure of the ions are given below:

a) The likely structure of the ion responsible for the base peak at 105 is a benzene ring with a substituent containing a nitrogen atom, such as aniline or N-methylaniline.

b) The likely structure of the ion responsible for the base peak at 72 is a methyl group, possibly as a fragment of a larger molecule.

c) The doublet at 198 and 200 suggests the presence of an isotope, and the base peak at 91 suggests the presence of a nitrogen-containing functional group, so a likely structure for the ion is an N-oxide functional group, such as a pyridine N-oxide.

d) The likely structure of the ion responsible for the base peak at 91 is a nitrogen-containing functional group, such as an amine or pyridine ring, and the large peak at 43 is likely a fragment containing a single nitrogen atom, such as NH2 or CH3N.

You can learn more about likely structure of ion at

https://brainly.com/question/25690897

#SPJ4

[tex]7.7 g[/tex] of N2 can be made when 132 grams of CuO are consumed.

The equation can be written as: NH3 + 3CuO → 3Cu + N2 + 3H2O

To calculate the amount of N2 produced in grams when 132 grams of CuO is consumed, we need to use the molar mass of each element.

Molar Mass of N2 = [tex]14 g/mol[/tex]

Molar Mass of CuO = [tex](63.5 + 16) g/mol = 79.5 g/mol[/tex]

Therefore, the number of moles of CuO consumed is [tex]\frac{ 132}{79.5} = 1.65 mol[/tex]

The ratio of N2 to CuO in the equation is 1 : 3. Therefore, the number of moles of N2 produced is[tex]\frac{1.65}{3 }= 0.55 mol.[/tex].

Now, to calculate the mass of N2 produced, we need to multiply the number of moles of N2 produced by the molar mass of N2, i.e. [tex]0.55 * 14 = 7.7 g.[/tex]

Therefore, the answer is [tex]7.7 g[/tex] of N2 can be made when 132 grams of CuO are consumed.

learn more about Molar Mass Refer:brainly.com/question/22997914

#SPJ4

complete question:2 NH3  +  3 CuO → 3 Cu  +  N2  +   3 H2O

In the above equation, how many grams of N2 can be made when 15 moles of CuO are consumed?

Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0

Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:

Element Molar Mass

Hydrogen 1

Nitrogen 14

Copper 63.5

Oxygen 16

Answer:  To date, approximately 1,200 dinosaur skeletons have been discovered.

Scientists can only guesstimate the other parts of the bodies of dinosaurs because a lot of times, partial skeletons have been found. Or even, when a full skeleton has been found, the skin and organs and everything else are gone. This leaves the scientists to make educated guesses about how they stood, what they looked like and everything else in between based on the skeletons they've found.

1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.

In the International System of Units, the mole (sign mol) is the unit of material quantity (SI). The amount of material is a measurement that indicates how many elementary constituents of a certain substance are present inside of an object or sample.

The mole has been defined as having 6.022×10²³ basic entities. An elementary entity can be an atom, chemical molecule, an ion, and ion pair, or perhaps a subatomic particle like an electron, depending on the substance.

A + 2B → C

moles of B = 2

the mole ratio between C and B is 1:2

moles of C= 1 mole

Therefore, 1 mole of C are formed upon complete reaction of 2 mol of B according to the generic chemical reaction.

To learn more about moles, here:

https://brainly.com/question/15209553

#SPJ6

The properly represents the order of orbital filling based on the relative energy of the orbitals is:

1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p.

Orbitals are the regions or regions in space around the atomic nucleus that have the highest probability of finding electrons. In the arrangement of the orbital diagram, an electron is symbolized by an arrow facing up which represents an electron with spin +½, or facing down which represents an electron with spin -½. To mark the distribution of orbitals within the atom, these arrows are placed on a horizontal line, in a circle, or generally in a box.

Orbital diagrams are used to facilitate the determination of the value of the quantum numbers, namely the magnetic quantum number and the spin quantum number.

Your question is incomplete but most probably your full question was:

Which of the following properly represents the order of orbital filling based on the relative energy of the orbitals?

Multiple Choice

1s 2s 3s 4s 2p 3p 4p 3p

1s 2s 2p 3s 3p 3d 4s 4p

1s 2s 2p 3s 3d 3p 4s 4p

1s 2s 2p 3s 3p 4s 3d 4p

Learn more about orbital at

https://brainly.com/question/18914648

#SPJ4

The power supply connector that is designed to provide power to a new hard drive in a desktop computer is the SATA power connector.

What is Hard Drive?

A hard drive, also known as a hard disk drive (HDD), is a type of data storage device that uses magnetic storage to store and retrieve digital information on a computer.

Hard drives consist of one or more rigid, rotating platters coated with a magnetic material, and a read/write head that moves over the platters to read and write data. The platters are spun at high speeds by a motor, while the read/write head floats just above the surface of the platters, using magnetic fields to read and write data.

SATA (Serial Advanced Technology Attachment) power connectors are used to provide power to SATA hard drives, as well as to other SATA devices such as optical drives and solid-state drives (SSDs). The SATA power connector is a small, rectangular, 15-pin connector that is typically located on the power supply cable coming from the power supply unit (PSU) in a desktop computer.

If your new hard drive requires power from the power supply unit, you will need to connect a SATA power connector to the drive's power port, which is usually located on the back of the drive. Some older hard drives may use a different type of power connector, such as the 4-pin Molex connector, but SATA is the most common type of power connector used for modern hard drives.

Learn more about Hard Drive from given link

https://brainly.com/question/26382243

#SPJ4

The vapor pressure of the substance at 29°C is 622.5 mm Hg.

Vapor pressure is the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a given temperature in a closed system. It is often used as a measure of a substance's ability to vaporize.

The Clausius-Clapeyron equation can be used to calculate the vapor pressure of a substance at a given temperature by using the boiling temperature (Tb) and vapor pressure (Pb) at the boiling point. The equation is given by:

ln(P2/P1) = (AHvap/R)(1/T1 - 1/T2)

where P2 and T2 are the vapor pressure and temperature of interest, P1 and T1 are the vapor pressure and temperature at the boiling point, AHvap is the enthalpy of vaporization, and R is the universal gas constant.

For this problem, we are given T1 = 76°C, P1 = 714.6 mm Hg, AHvap = 38.7 kJ/mol, and R = 8.31 J/K mol. We want to calculate the vapor pressure at T2 = 29°C.

Using the equation above, we can calculate the vapor pressure at T2 as follows:

ln(P2/714.6) = (38.7 kJ/mol)(1/298.15 K - 1/303.15 K)

ln(P2/714.6) = (38.7 kJ/mol)(-0.0033 K-1)

ln(P2/714.6) = -0.128

P2 = e-0.128 x 714.6 = 622.5 mm Hg

To learn more about vapor pressure

https://brainly.com/question/4463307

#SPJ1

To draw an alternative Lewis structure, we need to move electrons to form a double or triple bond between the nitrogen atom and another atom in the molecule. We can also move electrons to form a lone pair on another atom in the molecule. The goal is to achieve a more stable structure with formal charges as close to zero as possible.

For example, consider the incomplete Lewis structure:

H

|

N

One possible resonance structure is:

H

|

N=H

In this structure, we have formed a double bond between the nitrogen atom and one of the hydrogen atoms. We have also placed a lone pair of electrons on the other hydrogen atom.

The formal charge on the nitrogen atom in this structure is:

Valence electrons in nitrogen = 5

Non-bonding electrons = 2

Number of bonds = 1

Formal charge = Valence electrons - Non-bonding electrons - 1/2(Number of bonds) = 5 - 2 - 1/2(1) = 2

Therefore, the formal charge on the nitrogen atom in this structure is +2.

Note that this is just one possible resonance structure. There may be other valid resonance structures that can be drawn, and the actual distribution of electrons in the molecule is a combination of all possible resonance structures.

To know more about Lewis structure click here:

brainly.com/question/4144781

#SPJ4

The ionic equation for solid forming is Cu2+(aq) + 2OH-(aq) → Cu(OH)2(s) and the ionic equation for the solid dissolving is Cu(OH)2(s) + 2OH-(aq) → Cu(OH)4 2-(aq).

Solid forming refers to the process of creating a solid object or structure from a material that is initially in a liquid, powder, or semi-solid state. This process can be achieved through a variety of methods, including casting, molding, extrusion, and additive manufacturing (3D printing).

Casting involves pouring molten metal or other material into a mold to create a specific shape as the material cools and solidifies. Molding is similar to casting, but typically involves using a preformed mold made of material such as plastic, silicone, or metal. Extrusion involves pushing a material through a die to create a continuous shape, such as a tube or rod.

• ionic equation for Solid forming:

Cu2+(aq) + 2OH-(aq) → Cu(OH)2(s)

Solid dissolving is a process by which a solid substance dissolves in a liquid to form a homogenous solution. In this process, the solid substance (solute) is broken down into individual molecules or ions, which are then surrounded by the molecules of the liquid (solvent).

The rate at which a solid dissolves in a liquid depends on a number of factors, including the surface area of the solid, the temperature of the liquid, and the concentration of the solute in the liquid. Generally, increasing the surface area of the solid, increasing the temperature of the liquid, and increasing the concentration of the solute in the liquid all increase the rate of dissolution.

The process of solid dissolving can be understood using the concept of intermolecular forces. The attractive forces between the molecules of the solute and solvent play an important role in the dissolution process. When the forces of attraction between the solute and solvent molecules are stronger than the forces holding the solute together, the solute dissolves in the solvent.

• Solid dissolving:

Cu(OH)2(s) + 2OH-(aq) → Cu(OH)4 2-(aq)

If you did not observe these changes, it is recommended to repeat the experiment on day 2.

Learn more about ionic equation here:

https://brainly.com/question/29299745

#SPJ4

Benzoquinone is created when the hydroquinone reacts with the hydrogen peroxide that is breaking down (C6H4O2). The oxygen and hydrogen reaction causes

To learn more about benzoquinone, refer to:

https://brainly.com/question/15727318

#SPJ4

Most of the starch is broken down into glucose molecules, which are then absorbed by the cells of the small intestine and transported to the liver by the portal vein. In the small intestine, starch is hydrolyzed by enzymes, such as amylase, into its constituent glucose molecules.

Glucose is then transported across the intestinal wall and into the bloodstream by specialized transport proteins. From there, glucose is carried to the liver through the portal vein, where it can be stored, metabolized, or released into the bloodstream as needed to fuel other tissues. The breakdown of starch and subsequent transport of glucose are essential processes for providing energy to the body's cells and maintaining normal physiological functions.

Find out more about glucose molecules.

brainly.com/question/29240192

#SPJ4

a) 0.158 M is the concentration of the weak base.

b) 5.01 x [tex]10^{-3}[/tex] is the Kb of the weak base.

a) To determine the concentration of the weak base, we can use the equation:

moles of HCl = moles of weak base

We can calculate the moles of HCl from the volume and concentration:

moles of HCl

= 0.122 M x 0.03242 L

= 0.00395 mol

At the equivalence point, the moles of HCl will be equal to the moles of the weak base. Therefore, we can use this information to find the moles of the weak base:

moles of weak base = 0.00395 mol

Now we can use the volume and moles of the weak base to calculate its concentration:

The concentration of weak base = moles of weak base/volume of the weak base

The concentration of weak base = 0.00395 mol / 0.02500 L

The concentration of weak base = 0.158 M

Therefore, the concentration of the weak base is 0.158 M.

b) We have added half the quantity of HCl required to achieve the equivalence point at the half-equivalence point. We may thus conclude that half of the weak base has been neutralized while the other half is still in its fundamental state. This indicates that the weak base and its conjugate acid are present in equal proportions.

[weak base] = [conjugate acid]

We can use the expression for the ionization constant (Kb) to relate the concentrations of the weak base and its conjugate acid:

Kb = [conjugate acid] x [OH-] / [weak base]

Since the solution is at half-equivalence, the concentration of the weak base and its conjugate acid are both equal to 0.079 M (half of the initial concentration of the weak base). We can use this information and the given pH to calculate the concentration of hydroxide ions ([OH-]):

pH = 11.58 = 14 - pOH

pOH = 2.42

[OH-] = [tex]10^{-pOH}[/tex]

[OH-] = 5.01 x [tex]10^{-3}[/tex] M

Now we can use the expression for Kb to calculate its value:

Kb = [conjugate acid] x [OH-] / [weak base]

Kb = (0.079 M) x (5.01 x 10^(-3) M) / (0.079 M)

Kb = 5.01 x 10^(-3)

Therefore, the Kb of the weak base is 5.01 x [tex]10^{-3}[/tex].

For similar question on moles of HCl,

https://brainly.com/question/28623917

#SPJ4

Tetragonal crystalline structure is shared by several other metal oxides, including the mineral tin dioxide, often known as stannic oxide or cassiterite (SnO 2).

The tetragonal unit cell of SnO 2's rutile structure possesses P4 2 /mnm space-group symmetry and lattice constants of a = b = 4.7374 and c = 3.1864 [13].

When we look at this unit cell, we can tell that the titanium is the block. The lead is blue, which equals 123456 and P. B. 6. As a result, there is one titanium since there are six lead. P B six T. I., then.

therefore, The red is oxygen after that. We may also observe that we have 1234 Last 678 liters of oxygen. Thus, it should be 08. So, the formula for this unit cell is as follows. The number would be PB 6 Ki I-08.

Learn more about unit cell here:

https://brainly.com/question/13110055

#SPJ1

Due to its simplicity of use and high-throughput operations, liquid chromatography-mass spectrometry (LC-MS) is a widely used technique for determining peptide sequences.

To learn more about LC-MS, refer to:

https://brainly.com/question/16105508

#SPJ4

Answer:

≈ 177.7%

Explanation:

To calculate the percent yield of NO, we need to compare the actual yield (what was obtained in the experiment) to the theoretical yield (what should have been obtained if the reaction had gone to completion).

First, we need to determine the theoretical yield of NO. We can do this by using stoichiometry to convert the given mass of NH3 to the expected mass of NO, based on the balanced equation. The ratio of the coefficients in the balanced equation tells us that 4 moles of NH3 produce 4 moles of NO, so the mole ratio of NH3 to NO is 1:1. Therefore, the mass of NO that should be produced is:

12.0 g NO = (8.9 g NH3) × (1 mole NO / 4 moles NH3) × (30.01 g NO / 1 mole NO)

where we have used the molar mass of NO (30.01 g/mol) to convert from moles of NO to grams of NO. Evaluating this expression gives:

12.0 g NO = 6.748 g NO

So, the theoretical yield of NO is 6.748 g.

To calculate the percent yield, we use the following formula:

percent yield = (actual yield / theoretical yield) × 100%

Substituting the given values, we get:

percent yield = (12.0 g / 6.748 g) × 100% ≈ 177.7%

This result suggests that the actual yield is greater than the theoretical yield, which is not possible. The most likely explanation is that there was an error in the experiment, such as incomplete reaction, loss of product during handling, or inaccurate measurement of the masses. Therefore, we should check the experimental procedure and repeat the experiment to obtain a more reliable result.

Answer:

the answer is C. decrease agitation

The answers for following multiple question are given below.

(a)The equilibrium pressure of NH3 gas would remain unaffected. KP = (PNH3)(PH2S). Thus the amount of solid NH4HS present usually does not affect the equilibrium of the reaction.

(b) Generally, the equilibrium pressure of NH3 gas would decrease. In order for the pressure equilibrium to be constant, KP, to remain constant, the equilibrium pressure of NH3 must decrease when the pressure of H2S is increased. KP = (PNH3)(PH2S). (The complete explanation is based on the LeChatelier’s principle is also acceptable.)

(c) The mass of NH4HS increases because a decrease in volume causes the pressure of each gas to increase. To maintain the value of the pressure equilibrium constant, Kp, the pressure of each of the gases must decrease. The decrease in pressure is realized by the formation of more solid NH4HS. Kp = (PNH3)(PH2S). (A complete explanation based on LeChatelier’s principle is also acceptable.)

(d) Basically, the mass of NH4HS decreases because the endothermic reaction absorbs heat and goes nearer to completion (to the right) as the temperature increases.

Generally, for any chemical reaction, the equilibrium constant can be defined as the ratio between the amount of reactant and the amount of product which is used to determine chemical behaviour. At equilibrium, for any reaction, Rate of the forward reaction = Rate of the backward reaction.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/14531894

#SPJ4

The elements that would be the good selection as the sacrificial electrode in the cathodic protection of tin, Sn is the correct option is III. Nickel and IV. Magnesium.

The Sacrificial anodes are helpful to protect the metal structures from the corroding. The Sacrificial anodes will work by the oxidizing to quickly as compared to the  the metal that is protecting, and that is being consumed completely  and before the other metal will reacts with the electrolytes. The Sacrificial anodes is the metals or the alloys that is attached to the hull that is more anodic.

Thus, the nickel and magnesium is used as the sacrificial electrode in the cathode protection of the tin.

To learn more about cathode here

https://brainly.com/question/13072489

#SPJ4

The number of moles in 5.00 × 10²³ formula units of BaBr₂ is approximately 0.83 moles, calculated by dividing the given number of formula units by Avogadro's number (6.022 × 10²³).

To determine the number of moles in 5.00 × 10²³ formula units of BaBr₂, you have to know the Avogadro's number, which is 6.022 × 10²³ formula units per mole.

Therefore, using Avogadro's number, you divide the given number of formula units by this value. So, the calculation is as follows: 5.00 × 10²³ formula units / 6.022 × 10²³ formula units per mole = 0.83 moles of BaBr₂.

So, there are approximately 0.83 moles in 5.00 × 10²³ formula units of BaBr₂.

https://brainly.com/question/34302357

#SPJ2

ATP is not directly formed by any of the steps of the citric acid cycle. Option A is correct.

Although, the citric acid cycle produces some ATP indirectly through the electron transport chain, the production of ATP from the citric acid cycle does not occur directly in any of the steps of the cycle. The other options (CO₂, NADH, FADH₂, and coenzyme) are all directly involved in various steps of the citric acid cycle.

Citric acid cycle: The citric acid cycle, also known as the Krebs cycle or tricarboxylic acid (TCA) cycle, is a series of chemical reactions that occur in the mitochondria of eukaryotic cells and the cytoplasm of prokaryotic cells. It is a central metabolic pathway that completes the oxidation of carbohydrates, fats, and proteins, releasing energy that is used to produce ATP, the primary energy currency of the cell.

To know more about citric acid cycle here

https://brainly.com/question/11459709

#SPJ4

To calculate the initial volume of oxygen gas burned in the reaction, we need to use the stoichiometry of the reaction, which relates the amounts of reactants and products based on their balanced chemical equation.

To find the initial volume of oxygen gas burned in the reaction, we need to use stoichiometry to relate the amounts of reactants and products. The balanced chemical equation for the combustion of hydrogen gas and oxygen gas to form water tells us that for every 1 mole of O2 consumed, 2 moles of H2O are produced.

We can use this ratio to convert the mass of water produced to the number of moles of O2 consumed. Finally, we can use the ideal gas law to calculate the initial volume of O2 consumed. Using STP of 0°C and 1 atm, we find that the initial volume of O2 burned in the reaction was about 24.3 liters.

You can learn more about mass of water at

https://brainly.com/question/26173436

#SPJ4

              H

              |

H2C = CH - C ≡ N

              |

              H

This is a repeat unit of acrylonitrile. Three such units together, with hydrogen atoms on each end, would be drawn as:

 H          H

 |          |

H2C = CH - C≡N-CH2-CH=C H - C≡N

             |           |

             H           H

What is acrylonitrile?

Acrylonitrile is a colorless, liquid organic compound with the chemical formula C3H3N. It is an important monomer used in the production of various synthetic polymers, such as polyacrylonitrile, which is used in the manufacture of carbon fibers, and acrylonitrile-butadiene-styrene (ABS), a thermoplastic used in various applications such as automotive parts, toys, and electronic housings. Acrylonitrile is also used as a fumigant, in the production of specialty chemicals, and as a precursor to various pharmaceuticals. It is a highly reactive compound and must be handled with care due to its toxicity and flammability.

Hence, the answer is,

 H          H

 |          |

H2C = CH - C≡N-CH2-CH=C H - C≡N

             |           |

             H           H

To learn more about acrylonitrile, follow the link:

https://brainly.com/question/15081291

#SPJ4

The order is d, a e c 4 h, 2 heat is absorbed, heat is a part, 3 dipole force And dispersion force.

H2CO is a polar molecule and will have both dipole-dipole forces and London dispersion forces while CH3CH3 is a non-polar molecule and will Only have London dispersions forces.

The intermolecular forces present for the molecules given are the London Dispersion forces and the dipole-dipole forces. The London Dispersion Forces exist for all molecules. Therefore, it will exist between H2O H 2 O And CH3CN C H 3 C N .

To learn more about dipole force & dispersion force

https://brainly.com/question/14958417

#SPJ4

A: 2,4-dinitrophenol (DNP) is the compound that uncouples electron transport from ATP synthesis and allows H+ back across without ATP synthase.

DNP is a protonophore that acts by making the inner mitochondrial membrane leaky to protons. This causes a disruption of the proton gradient that drives ATP synthesis by the ATP synthase, which in turn uncouples the electron transport chain from ATP synthesis. This can result in a decrease in the efficiency of cellular respiration, and in some cases, can be toxic to cells. In contrast, the other compounds listed (rotenone, oligomycin, antimycin A, and cyanide) act by inhibiting various components of the electron transport chain and do not directly uncouple electron transport from ATP synthesis.

You can learn more about ATP synthesis at

https://brainly.com/question/893601

#SPJ4

Answer:

Many moles are formed

Explanation:

The mass of CaCO₃ can be obtained as follow:

Mole = mass / molar mass

1.23 = Mass of CaCO₃ / 100.09

Cross multiply

Mass of CaCO₃ = 1.23 × 100.09

Mass of CaCO₃ = 123.11 g

The mole of C₁₂H₂₂O₁₁ can be obtained as follow:

Mole = mass / molar mass

Mole of C₁₂H₂₂O₁₁ = 65.32 / 342.34

Mole of C₁₂H₂₂O₁₁ = 0.19 mole

The mole of Ba₃(PO₄)₂ can be obtained as follow:

Mole = mass / molar mass

Mole of Ba₃(PO₄)₂ = 146 / 601.93

Mole of Ba₃(PO₄)₂ = 0.24 mole

The mass of F₂ can be obtained as follow:

Mole = mass / molar mass

3.25 = Mass of F₂ / 100.09

Cross multiply

Mass of F₂ = 3.25 × 38

Mass of F₂ = 123.5 g

The mole of Mg(OH)₂ can be obtained as follow:

Mole = mass / molar mass

Mole of Mg(OH)₂ = 760 / 58.87

Mole of Mg(OH)₂ = 12.91 moles

The mass of Fe₂O₃ can be obtained as follow:

Mole = mass / molar mass

0.234 = Mass of Fe₂O₃ / 159.7

Cross multiply

Mass of Fe₂O₃ = 0.234 × 159.7

Mass of Fe₂O₃ = 37.37 g

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

The reaction of benzene with succinic anhydride in the presence of aluminum chloride as a catalyst is a Friedel-Crafts acylation reaction. The product obtained from this reaction is benzene-1,4-dicarboxylic acid.

A carbonyl group is a functional group that consists of a carbon atom double-bonded to an oxygen atom (C=O). It is a polar group and is found in a variety of organic compounds, such as aldehydes, ketones, carboxylic acids, esters, amides, and others.

carbonylgroup from succinic anhydride adds to one of the ortho- or para- positions of benzene, but the resulting intermediate is unstable and rearranges to the more stable meta- isomer. The final product is the result of two such additions to opposite carbons of the succinic anhydride.

To learn more about Friedel-Crafts acylation :

https://brainly.com/question/14727398

#SPJ4

The limiting reactant depends on the relative amounts of Al and O2 and can be determined by converting the amounts to the same unit and comparing them to the stoichiometric ratio in the balanced equation.

This question should be provided as:

For the reaction shown, find the limiting reactant for each of the following initial amounts of reactants.

In which is Al limiting and which is O2 limiting?

Learn more about limiting reactant brainly.com/question/14222359

#SPJ4