What is the molarity of a solution made by mixing 112. 3 g Mg(OH)2 with enough water to make 1. 2 L?

No approximations or assumptions need to be made in the calculation of the pH and the tartrate ion 1C4H4O6 2-2 concentration for a 0.250 M solution of tartaric acid.

The pH and the tartrate ion 1C4H4O6 2-2 concentration of a 0.250 M solution of tartaric acid can be calculated using the acid-dissociation constants and the Henderson-Hasselbalch equation. The acid-dissociation constants (Ka1 and Ka2) of tartaric acid are 1.14x10-2 and 5.01x10-5, respectively.

The pH of the solution can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([base]/[acid]) where [base] is the concentration of the conjugate base (the tartrate ion) and [acid] is the concentration of the acid (tartaric acid). Since the solution is 0.250 M in tartaric acid, [acid] = 0.250 M and [base] = 0.250 M - [tartrate ion], which can be calculated using the Ka1 and Ka2 values.

For Ka1, the tartrate ion 1C4H4O6 2-2 concentration can be calculated as 0.250 M - 0.250 * 1.14x10-2 = 0.249 M. For Ka2, the tartrate ion 1C4H4O6 2-2 concentration can be calculated as 0.250 M - 0.250 * 5.01x10-5 = 0.249 M.

Using the Henderson-Hasselbalch equation, the pH of the solution can be calculated as pH = pKa + log([base]/[acid]). The pKa values of tartaric acid are 3.92 and 5.63 respectively. Therefore, for Ka1, the pH of the solution can be calculated as pH = 3.92 + log(0.249/0.250) = 3.91, and for Ka2, the pH of the solution can be calculated as pH = 5.63 + log(0.249/0.250) = 5.63.

No approximations or assumptions need to be made in the calculation of the pH and the tartrate ion 1C4H4O6 2-2 concentration for a 0.250 M solution of tartaric acid, as the Henderson-Hasselbalch equation and the acid-dissociation constants of tartaric acid can be used.

Learn more about Tartaric acid: brainly.com/question/24178503

#SPJ11

These three options are correct for assisting crystal formation- 1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent. 2. Nucleate the crystals with a scrap of paper. 3. Include some crystals of the compound being crystallized.

Crystallization is the process by which a solid material forms a structured arrangement of its particles, producing a highly ordered and frequently repeating pattern. The formation of solid crystals such as salt, sugar, and diamonds exemplifies this. When the molecules of a solid tend to organize themselves into a more ordered pattern, this is referred to as crystallization.

Seeding is the process of adding a scrap of paper to nucleate the crystals. Seeding entails placing a small crystal in a container of supersaturated solution, which serves as a nucleus for other crystals to form around. This process accelerates crystal growth and can be used to produce larger, more consistent crystals. It can also be used to make crystals of various shapes and sizes. The addition of a scrap of paper causes the solution to form around it, promoting crystal formation.

to know more about Erlenmeyer flask, visit:

brainly.com/question/10261429

#SPJ1

Answer:

11.The type of reaction occurring is an elimination reaction.

12. a) The displayed formula and name of the ester formed when ethanoic acid reacts with propan-1-ol in the presence of a suitable catalyst are:

Displayed formula:

H H

│ │

H-C-C-OH + H-C-C-H → H-C-C-OC-C-H + H₂O

│ │

H CH₃

Name: Propan-1-yl ethanoate or propyl acetate

b) A suitable catalyst for this reaction is concentrated sulfuric acid (H₂SO₄).

The movement of H+ ions across the membrane from the intermembrane space to the matrix causes synthase to spin and make ATP(Adenosine Tri Phosphate).

Chemiosmosis is the key process in cellular respiration due to which this happens. During chemiosmosis, proton pumps in the inner membrane actively transport H+ ions from the intermembrane space into the matrix which creates an electrochemical gradient, with a higher concentration of H+ ions in the matrix than in the intermembrane space. ATP synthase is a protein complex that sits on the inner membrane, and it uses the force of this electrochemical gradient to spin, like a turbine. As the synthase spins, it catalyzes the formation of ATP from ADP and a phosphate molecule. This process produces the energy needed by the cell to carry out its functions.

To learn more about H+ ions click here https://brainly.com/question/11171476

#SPJ4

To synthesize 1-phenyl-1-propanol using the Grignard reaction, you need an aldehyde and a Grignard reagent. The aldehyde should be formaldehyde (CH2O). The Grignard reagent needed is benzylmagnesium bromide (C6H5MgBr).

As we know, retrosynthesis is the technique used in organic chemistry to break down a molecule into smaller units called retrosynthetic fragments. The reason for this is to develop a strategy for synthesis by connecting these fragments. It is an important concept for designing and organizing complex syntheses.According to the question, we have to use retrosynthetic analysis to suggest a way to synthesize 1-phenyl-1-propanol using the Grignard reaction. Let's find out the aldehyde and Grignard reagents needed for the synthesis of 1-phenyl-1-propanol. The retrosynthetic analysis of 1-phenyl-1-propanol is given below:In the above diagram, we can see that 1-phenyl-1-propanol can be prepared by reacting Grignard reagent with aldehyde. The aldehyde should be propanal. The Grignard reagent should be Phenylmagnesium bromide (C6H5MgBr). Thus, propanal and phenylmagnesium bromide can be used to synthesize 1-phenyl-1-propanol through the Grignard reaction.So, the aldehyde should be propanal, and the Grignard reagent should be Phenylmagnesium bromide (C6H5MgBr).

For more such questions on Formaldehyde

https://brainly.com/question/14666693

#SPJ11

Answer:

D - particles.

Explanation:

I took the same test.

During the cycle, citrate undergoes a series of chemical reactions that involve several enzymes, resulting in the conversion of citrate to isocitrate, α-ketoglutarate, succinyl-CoA, succinate, fumarate, and finally to oxaloacetate.

What are carbons ?

Carbons are atoms of the chemical element carbon. Carbon is a nonmetallic element that is essential to life on Earth. It is the basis for all known forms of life and is a key component of organic molecules, which are the building blocks of life.

Carbon atoms have six protons in their nucleus and typically have six neutrons as well, giving them an atomic mass of 12. Carbon atoms can bond with other atoms of carbon to form long chains or with atoms of other elements to form a variety of different molecules, including carbohydrates, lipids, nucleic acids, and proteins.

In one complete turn of the citric acid cycle, the carbons of citrate are converted to the following:

Carbon dioxide (CO2)

Oxaloacetate

ATP (Adenosine triphosphate)

NADH (Nicotinamide adenine dinucleotide)

FADH2 (Flavin adenine dinucleotide)

During the cycle, citrate undergoes a series of chemical reactions that involve several enzymes, resulting in the conversion of citrate to isocitrate, α-ketoglutarate, succinyl-CoA, succinate, fumarate, and finally to oxaloacetate. Along the way, carbon dioxide is released, and electrons are transferred to electron carriers such as NAD+ and FAD, which are then used to generate ATP via oxidative phosphorylation.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ1

Water, a naturally occurring and vital component for life on Earth, is really known chemically as dihydrogen monoxide (DHMO). When consumed in moderation, it is not dangerous.

The claim you made appears to be a well-known internet hoax that has been circulated for a while. It is frequently used in jokes and satire to highlight how quickly false information and fear-mongering can spread.

It is crucial to rely on reliable sources and scientific facts when analyzing information, especially when it comes to health and safety, to address your concern. To assist people in recognizing and avoiding misleading or inaccurate information, it is also crucial to encourage critical thinking and media literacy.

In other words, since dihydrogen monoxide is a fundamental substance required for existence, there is nothing to "repair" in regard to it. Instead, in order to assure accurate and trustworthy knowledge, we should concentrate on information verification and the advancement of scientific literacy.

learn more about dihydrogen monoxide here

https://brainly.com/question/29094259

#SPJ1

To determine if a data point can be ignored when calculating the average in General Chemistry, Appendix D of the lab manual recommends using the Q-test at 95% confidence. The Q-test is a statistical test that is used to determine if a data point is an outlier, or if it falls outside the expected range of values for the data set.

To use the Q-test, one must calculate the Q-value for each data point and compare it to the critical Q-value at the desired level of confidence. If the calculated Q-value is greater than the critical Q-value, then the data point is considered an outlier and can be excluded from the calculation of the average.

Regarding the second question, the spectator ions in the reaction between aqueous perchloric acid and aqueous barium hydroxide are H+ and ClO4-. These ions do not participate in the chemical reaction, but are present in the solution due to the dissociation of the reactants. The actual chemical reaction is the formation of insoluble barium perchlorate (Ba(ClO4)2) and water (H2O) through the combination of barium hydroxide (Ba(OH)2) and perchloric acid (HClO4), which are the only ions involved in the reaction.

To learn more about barium hydroxide refer to

brainly.com/question/30888146

#SPJ4

Poisoning proton pumps impact anion uptake in such a way that  It would decrease the uptake of anions by passive diffusion.

The process by which molecules diffuse from a region of higher concentration to a region of lower concentration is known as passive diffusion. It is the most important mechanism for drug passage across membrane.

Diffusion is the net movement of material from a high concentration area to a low concentration area. The concentration gradient is the difference in concentration between the two areas, and diffusion will continue until this gradient is eliminated. Because diffusion transports materials from a high concentration area to a low concentration area

to know more about passive diffusion , visit ;

brainly.com/question/1304999

#SPJ1

Option (b) is correct. The enthalpy change for the thermochemical equation, C (s) + ½O2(g) → CO2(g) is -99 KJ.

Hess's law states that the total heat changes occurring during a chemical reaction are independent of path.

Thermochemical equation are defined as the chemical equation which includes the term 'Heat' are referred to as thermochemical equations. The thermochemical equation include chemical equations for endothermic reactions and exothermic reaction. The thermochemical equations are,

C(s) + O2(g) → CO2(g),  ΔH = −393 kJ

CO(g) + ½O2(g) → CO2(g), ΔH = −294 kJ

Adding both the solution we get,

C (s) + ½O2(g) → CO2(g)

so, ΔH = 294 kJ - 393 kJ

           = -99 KJ

The standard enthalpy change of reaction for a chemical reaction can be defined as the the difference between total reactant and total product molar enthalpies calculated for substances in their standard states.

To learn more about enthalpy change

https://brainly.com/question/14047927

#SPJ4

Absolute dating and relative dating are two methods used by scientists to determine the age of rocks, fossils, and other geological materials.

Relative dating involves comparing the placement of fossils in rock layers. By analysing the sequence of rock layers, scientists can determine the relative ages of fossils and other materials. For example, if a fossil is found in a layer of rock that is below another layer, it is considered to be older than the layer above it.

Absolute dating involves using scientific methods to determine the exact age of a material. This is often done using radiometric dating techniques, which involve measuring the amount of certain isotopes in a sample.

Carbon-14 dating is based on the fact that carbon-14, an isotope of carbon, is created when cosmic rays interact with nitrogen in the atmosphere. Plants and animals take in carbon-14 through photosynthesis and eating, and the carbon-14 decays over time at a known rate. By measuring the amount of carbon-14 in a sample, scientists can determine the age of the material.

Radiometric dating is a technique used to date rocks and other geological materials based on the decay rate of radioactive isotopes. For example, uranium-lead dating can be used to date rocks that are billions of years old, by measuring the amount of uranium and lead in the sample and calculating how long it has been decaying.

To find out more about dating techniques, visit:

https://brainly.com/question/12291163

#SPJ1

Answer:

0.2322 moles of ammonia

Explanation:

given:

mass of ammonia: 3.956 g

unknown: moles of ammonia

=[tex]given\frac{1 mol}{MolarMass}[/tex]

=[tex]3.956\frac{1}{17.030}[/tex]

=0.2322 moles of ammonia

A table that organizes elements based on their atomic numbers and protein and electron's and nuetrons

Explanation:

LITTERLY the answer

It is important to keep a NaOH (sodium hydroxide) solution stoppered at all times when it is not in use for several reasons.

Firstly, NaOH is a highly reactive and caustic substance that can cause severe skin burns and eye damage if it comes into contact with unprotected skin or eyes. By keeping the solution stoppered, it helps to prevent accidental spills or splashes that could potentially cause harm.

Secondly, NaOH can readily absorb moisture from the air, causing it to become more concentrated over time. This can lead to an increased risk of accidental burns or damage if the solution is not properly diluted before use.

Finally, leaving the NaOH solution uncovered can also lead to the release of harmful fumes or vapors into the surrounding environment. By keeping the solution stoppered, it helps to minimize the risk of exposure to these fumes or vapors, which can be irritating to the respiratory system and potentially harmful to health.

To learn more about NaOH refer to

brainly.com/question/29854404

#SPJ4

a) The appropriate hypotheses for this question are:

H0: The mean fuel economy for the company's fleet of cars is less than or equal to 26 miles per gallon (MPG).

HA: The mean fuel economy for the company's fleet of cars is greater than 26 MPG.

b) The necessary assumptions to perform inference in this situation are that the data is sampled from a normal distribution, and that the sample is a random sample from the population.

c) To test the hypothesis, we can perform a one-sample t-test with a significance level of 0.05. The P-value for this test is 0.004.

d) The P-value in this context indicates that, at a significance level of 0.05, there is a 0.004 probability of obtaining the data given that the null hypothesis is true.

e) Based on the P-value, we can reject the null hypothesis and conclude that the mean fuel economy for the company's fleet of cars is greater than 26 MPG.

"fuel economy", https://brainly.com/question/15776562

#SPJ11

The Wittig reaction can be used to synthesize conjugated dienes by reacting an aldehyde or ketone with a phosphorous ylide. For the double bond labeled b in the given structure, a combination of a Wittig reagent and an aldehyde can be used to synthesize the desired product.

The Wittig reaction can be used for the synthesis of conjugated dienes. To synthesize the double bond labeled b in this structure using Wittig reagent and aldehyde/ketone, the following steps should be followed:

Step 1: The starting materials are Wittig reagent and aldehyde/ketone. The aldehyde/ketone can be either cyclic or acyclic.

Step 2: A solution of Wittig reagent in THF is added to the aldehyde/ketone, and the mixture is heated for several hours to allow the Wittig reaction to occur.

Step 3: The product is then isolated by filtration and recrystallization, and the double bond labeled 'b' is formed. The combination of Wittig reagent and aldehyde/ketone that can be used to synthesize the double bond labeled 'b'.

Wittig reagent: Ph3PCH2=CPh2

Aldehyde/Ketone: C6H5CH2CHO or C6H5C(O)CH3

Thus, the Wittig reagent Ph3PCH2=CPh2 and aldehyde/ketone C6H5CH2CHO or C6H5C(O)CH3 can be used to synthesize the double bond labeled 'b'.

For more such questions on Wittig reaction , Visit:

https://brainly.com/question/17145573

#SPJ11

On comparing sample-1 and sample-2 it contains more heat energy.

Temperature is a compute of the average kinetic energy of the molecules in a element. The higher the temperature, the more kinetic energy the molecules have, and therefore the more heat energy the substance contains.

In this case, sample 2 is at a higher temperature than sample 1, which means its molecules have a higher average kinetic energy and velocity.

This results in sample 2 containing more heat energy than sample 1. It's important to note that heat energy is not the same as temperature, as heat energy is a form of energy while temperature is a measure of the average kinetic energy of molecules.

To know more about samples of water:

https://brainly.com/question/29411059

#SPJ4

If there is initially 0.420 atm of H2O2(g), the equilibrium partial pressures in atm of H2(g), O2(g), and H2O2(g) are 0.314 atm and if the volume is doubled, the total pressure of the system will be reduced to half of the original pressure due to the gas law.

a) Using the given equilibrium constant, we can set up an ICE (Initial, Change, Equilibrium) table to calculate the equilibrium partial pressures:

⇒            2H2O2(g) ⇌ 2H2(g) + O2(g)

Initial: 0.420 atm 0 atm 0 atm

Change: -x +2x +x

Equilibrium: 0.420-x 2x x

Substituting the values into the equilibrium constant expression:

⇒             Kc = [H2]^2[O2]/[H2O2]^2 = 7.109

⇒           7.109 = (2x)^2/(0.420-x)^2

Solving for x, we get x = 0.106 atm

Therefore, at equilibrium, the partial pressures of H2, O2, and H2O2 are:

⇒          PH2 = 2x = 0.212 atm

⇒          PO2 = x = 0.106 atm

⇒         PH2O2 = 0.420 - x = 0.314 atm

b) According to Le Chatelier's principle, the equilibrium will shift in the direction that opposes the change. When the volume is doubled, the system will try to reduce the pressure by shifting towards the side with fewer moles of gas. Since the reaction involves the formation of two moles of gas from two moles of reactants, the forward reaction will be favored to reduce the pressure. As a result, the partial pressure of H2O2(g) will increase to establish a new equilibrium.

To know more about the Equilibrium, here

https://brainly.com/question/12920261

#SPJ4

The freezing point of a solution made by dissolving 50.0 g of methyl salicylate in 800 g of benzene is 3.16°C.

The freezing point of a solution can be calculated using the equation: ΔT = Kf·m, where Kf is the freezing point constant, m is the molal concentration of the solution and ΔT is the freezing point depression of the solution.

The molal concentration of a solution can be calculated using the equation: m = moles of solute / kg of solvent. To calculate the moles of solute, we can use the molecular weight of methyl salicylate (138.2 g/mol) and convert the mass of the solute from grams to moles.

m = (50.0 g C7H6O2)/(138.2 g/mol) = 0.361 moles C7H6O2

The molal concentration can now be calculated: m = 0.361 moles C7H6O2 / 0.800 kg benzene = 0.45 molal C7H6O2

Using the molal concentration, we can calculate the freezing point depression: ΔT = Kf·m = (5.12 °C/molal) · (0.45 molal C7H6O2) = 2.31 °C.

The freezing point of the solution can then be calculated: freezing point = (freezing point of pure solvent) – ΔT = (5.47 °C) – (2.31 °C) = 3.16 °C.

Learn more about freezing point: https://brainly.com/question/40140

#SPJ11

The balanced equation for the reaction between ammonia and oxygen, which produces nitrogen monoxide and water is as 4 NH3 + 5 O2 → 4 NO + 6 H2O

The reaction is exothermic, and it occurs through a series of steps.

Firstly, ammonia oxidizes into nitrogen monoxide, which is a brown gas, and water vapor.

4 NH3 + 5 O2 → 4 NO + 6 H2O

The nitrogen monoxide is further oxidized by reacting with more oxygen molecules.

2 NO + O2 → 2 NO2

Finally, the nitrogen dioxide can react with water vapor to produce nitric acid and nitrogen oxide.

3 NO2 + H2O → 2 HNO3 + NO

When oxygen reacts with ammonia, nitrogen monoxide and water are produced.

To know more about balanced equation, refer here:

https://brainly.com/question/12192253#

#SPJ11

The spacing between the carbon ions will be equal to the spacing between the uranium ions, as both ions have the same speed. The same mass spectrometer will measure both ions in the same way, regardless of their mass.

Explanation: When a beam of singly ionized carbon atoms ( 12c and 14c ) is injected into the same mass spectrometer as the uranium ions (with the same speed), the spacing between the carbon ions will be greater than the spacing between the uranium ions.What is a mass spectrometer?A mass spectrometer is an instrument used to calculate the masses of ions, which are used to distinguish one substance from another. A beam of ions with the same speed is injected into the mass spectrometer.The spacing between carbon ions is greater than the spacing between uranium ions. The mass of the carbon ions is less than the mass of the uranium ions, despite the fact that they have the same velocity.Therefore, according to the formula, force = mass x acceleration, the acceleration of carbon ions is greater than that of uranium ions because the force they receive is the same. As a result, carbon ions have a greater deflection than uranium ions. The spacing between carbon ions is greater than the spacing between uranium ions.

For more such questions on uranium

https://brainly.com/question/29205436

#SPJ11

The categories of compounds that will affect the pH of the aqueous solution they are dissolved in are Amines, and Carboxylic acids. Therefore the correct answer is letters B and D.

Compounds that will affect the pH of the aqueous solution they are dissolved in are Amines, and Carboxylic acids. The reason for this is that when these compounds dissolve in water, they produce ions that affect the pH of the solution.

Amines are organic compounds that have a nitrogen atom bonded to one or more carbon atoms. They are basic in nature and can undergo an acid-base reaction to produce a protonated amine (NH₃⁺) that can affect the pH of the solution.

Carboxylic acids are organic compounds that have a carboxyl (-COOH) functional group attached to a carbon atom. They are acidic in nature and can undergo an acid-base reaction to produce a carboxylate ion (COO⁻) that can affect the pH of the solution.

learn more about amine and carboxyl groups

https://brainly.com/question/11023705

#SPJ11

140.4 grams of dinitrogen pentoxide are produced from  104.0 grams of oxygen and 204.0 grams of nitrogen.

To calculate the mass of dinitrogen pentoxide that could be formed from 104.0 grams of oxygen and 204.0 grams of nitrogen, we need to use stoichiometry.

From the balanced equation, we can see that 2 moles of nitrogen react with 5 moles of oxygen to produce 2 moles of dinitrogen pentoxide. Therefore, we need to determine the limiting reactant in this reaction, which is the reactant that is completely consumed and determines the amount of product that can be formed.

To do this, we can calculate the number of moles of each reactant:

The ratio of moles of nitrogen to moles of oxygen is 7.29/3.25 ≈ 2.24/1. Therefore, oxygen is the limiting reactant because we need 5 moles of oxygen for every 2 moles of nitrogen.

Now we can use the amount of oxygen to calculate the amount of dinitrogen pentoxide that can be formed:

Finally, we can calculate the mass of dinitrogen pentoxide using its molar mass:

Therefore, 104.0 grams of oxygen and 204.0 grams of nitrogen can produce a maximum of 140.4 grams of dinitrogen pentoxide.

learn more about stoichiometry

https://brainly.com/question/14935523

#SPJ11

Answer:

2.13 mol Al2O3

Explanation:

mol of Al=
115g/ 26.9 g/mol

4.275 mol of Al

The multiply by mol ratio

4.275 * 1 mol al2o3/2 mol Al

2.13

The net ionic equation for the given process is

Cu + 4HNO3 → Cu(NO3)2 + 2NO2 + 2H2O

Concentrated nitric acid oxidizes copper metal to copper ions. The balanced chemical equation for this reaction is as follows.

3Cu + 8HNO3 → 3Cu(NO3)2 + 2NO + 4H2O

The net ionic equation is obtained by eliminating spectator ions from the balanced ionic equation. Only the species that take part in the reaction are included in the net ionic equation. The complete ionic equation is obtained by writing all the soluble compounds as ions.

3Cu + 8H+ + 8NO3- → 3Cu2+ + 6NO3- + 2NO + 4H2O

Only Cu2+ and NO3- ions are changing from reactants to products, so they are included in the net ionic equation.

The net ionic equation is as follows.

Cu + 4HNO3 → Cu(NO3)2 + 2NO2 + 2H2O.

To learn more about "balanced net ionic equation", visit: https://brainly.com/question/30051249

#SPJ11

The table shows that as the atomic radius grows, the boiling points of the halogens rise. This implies that the intensity of the intermolecular interactions between the atoms and the size of the halogen atom are related.

Because astatine has a bigger atomic radius than iodine, we can infer from this pattern that it will have a higher boiling point.

learn more about boiling point here

https://brainly.com/question/40140

#SPJ1

For HF, there are dispersion forces and dipole-dipole forces present.

Intermolecular forces are forces that arise as a result of interactions between similar molecules. Dipole-dipole attraction is the dipole attraction that occurs between polar molecules and/or solid, liquid, and solution states.

Inter-dipole attraction occurs due to the presence of dipoles in molecules and has a stronger attraction than the London force. example: Intermolecular forces of HCl.  

For dispersion forces and dipole-dipole forces, there are both dispersion forces and dipole-dipole forces present. For dispersion forces, dipole-dipole forces and hydrogen bonding, there are dispersion forces, dipole-dipole forces and hydrogen bonding present.

Learn more about kinds of intermolecular: brainly.com/question/8623963

#SPJ11

The pressure of the gas sample is 825 mm Hg.

In an open manometer, the pressure of the gas sample can be determined by measuring the difference in height of the mercury levels in the two arms of the manometer. The pressure of the gas sample is equal to the difference in height between the two mercury levels, plus the atmospheric pressure.

In this case, the mercury level in the arm connected to the gas is 45 mm Hg higher than in the arm connected to the atmosphere. This means that the pressure of the gas sample is 45 mm Hg higher than the atmospheric pressure.

So, the pressure of the gas sample can be calculated as:

Pressure of gas sample = atmospheric pressure + height difference between the two mercury levels

Pressure of gas sample = 780 mm Hg + 45 mm Hg

Pressure of gas sample = 825 mm Hg

Therefore, the pressure of the gas sample is 825 mm Hg.

Learn more about manometer here : brainly.com/question/13949430

#SPJ1