What is the relationship between the latitude and hours of daylight

Answers

Answer 1

Answer:

The tilt of the Earth's axis also defines the length of daylight.Daylight hours are shortest in each hemisphere winter. Between summer and winter

solistice the number of daylight hours decreases and the rate of decrease is larger the higher the latitude.The fewer sunlight hours the colder nights.


Related Questions

1. Collect data: Create two water cycles using the Gizmo. Each cycle should have at least four steps and should begin and end at the same location. Choose any starting point from the list on the right. When the cycle is complete, choose the PATH tab and write the steps below.

Answers

Answer:

Cycle 1: Lake,atmosphere, clouds,rain,lake

Cycle 2: Atmosphere, clouds, rain, ocean

23. For the reaction shown, calculate how many moles of each
product form when the given amount of each reactant com-
pletely reacts. Assume there is more than enough of the
other reactant.
2PbS(s) + 302(g) → 2PbO(s) + 2S02(8)
(a) 2.4 mol PbS
(b) 2.4 mol O2
(c) 5.3 mol PbS
(d) 5.3 mol O2

Answers

Further explanation

The reaction equation is the chemical formula of reagents and product substances  

A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products  

Mol ratio :

Pbs : O₂ : PbO : SO₂ = 2 : 3 : 2 : 2

(a) 2.4 mol PbS

mol PbO

[tex]\tt \dfrac{2}{2}\times 2.4=2.4[/tex]

mol SO₂

[tex]\tt \dfrac{2}{2}\times 2.4=2.4[/tex]

(b) 2.4 mol O₂

mol PbO

[tex]\tt \dfrac{2}{3}\times 2.4=1.6[/tex]

mol SO₂

[tex]\tt \dfrac{2}{3}\times 2.4=1.6[/tex]

(c) 5.3 mol PbS

mol PbO

[tex]\tt \dfrac{2}{2}\times 5.3=5.3[/tex]

mol SO₂

[tex]\tt \dfrac{2}{2}\times 5.3=5.3[/tex]

d) 5.3 mol O₂

mol PbO

[tex]\tt \dfrac{2}{3}\times 5.3=3.53[/tex]

mol SO₂

[tex]\tt \dfrac{2}{3}\times 5.3=3.53[/tex]

he descriptions below explain two ways that water is used by plants on a sunny day.

I. In a process called transpiration, some liquid water in leaves changes to water vapor. The water vapor is released into the air through tiny pores in the leaves. This allows more liquid water from the soil to be pulled up the roots and stem to replace water lost from the leaves.

II. Plants use some of this water in leaves in a process called photosynthesis. During photosynthesis, water and carbon dioxide break apart and recombine to form two new substances, oxygen and glucose.

Based on the above description of transpiration and photosynthesis, which type of change happens to water during each process?

In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a chemical change.
In transpiration, because some of its properties change, water undergoes a chemical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a physical change.
In transpiration, because its physical properties change, water undergoes a physical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a chemical change.
In transpiration, because its chemical properties change, water undergoes a chemical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a physical change.
Mark this and return

Answers

Answer:number 2

Explanation: because thats how it works

Answer: BBBBBB

Explanation:

How does the work needed to lift an object and the gravitational potential energy of the object compare? OThey are equal. OThe work is greater. OThe work is less. OThe comparison dependş on the height.
○ they are equal
○ the work is greater
○ the work is less
○ the comparison depends on the height​

Answers

Answer:

They are equal

Explanation:

took the test

Answer:

ITS A JUST FINISHED

Explanation:

how did music change during medieval, renaissance and baroque eras​

Answers

Answer:

usage of trills and vibrato

Explanation:

earlier music used trills while later styles would use vibrato.

what is the chemical name of CCI3

Answers

Answer:

Trichloromethyl radical

Explanation:

Answer:

trichloromethanide

Hope this helped

choose the letter that best describes the behavior of a substance during a phase change:

/A/ neither absorbs or releases energy

/B/ always absorbs energy

/C/ always releases energy

/D/ either absorbs or releases energy

Answers

Answer:

/D/ either absorbs or releases energy

Explanation:

During a phase change energy is either absorbed or released.

A phase change is a reversible process which occurs when a substance changes is its state from one form to another.

Phase changes are used to delineate physical changes.

A phase diagram provides a graphic representation of the change. The diagram can be 2 dimensional or 3 dimensional.

A 1.00-L flask is filled with 1.00 moles of H2 and 2.00 moles of I2. The value of the equilibrium constant for the reaction of hydrogen and iodine reacting to form hydrogen iodide is 50.5 under the given conditions. What are the equilibrium concentrations of H2 , I2 , and HI in moles/L? H2 (g) + I2 (g) ⇌ 2HI(g)

Answers

Answer:

[tex] C_{H_{2}} = 0.07 M [/tex]

[tex] C_{I_{2}} = 1.07 M [/tex]

[tex] C_{HI} = 1.86 M [/tex]

Explanation:

The reaction is:

H₂(g) + I₂(g) ⇄ 2HI(g)

Initially, we have the following concentrations of H₂ and I₂:

[tex] C_{H_{2}} = \frac{n}{V} = \frac{1 mol}{1.00 L} = 1 mol/L [/tex]

[tex] C_{I_{2}} = \frac{n}{V} = \frac{2 mol}{1.00 L} = 2 mol/L [/tex]

Then, in the equilibrium we have:

H₂(g) + I₂(g) ⇄ 2HI(g)

1-x       2-x         2x

[tex] Kc = \frac{[HI]^{2}}{[H_{2}][I_{2}]} = \frac{(2x)^{2}}{(1-x)(2-x)} [/tex]

[tex] 50.5*(1-x)(2-x) - (2x)^{2} = 0 [/tex]

By solving the above equation for x we have:

x₁ = 2.32 and x₂= 0.93

Hence, the concentrations of H₂, I₂ and HI are:

[tex] C_{H_{2}} = 1-x = 1 - 0.93 M = 0.07 M [/tex]

[tex] C_{I_{2}} = 2-x =  2 - 0.93 M = 1.07 M [/tex]

[tex] C_{HI} = 2*x = 2*0.93 M = 1.86 M [/tex]

I hope it helps you!    

Which of the following elements has the lowest ionization energy?
A. chlorine (CI)
B. potassium (K)
C. magnesium (Mg)
D.neon (Ne)

Answers

Answer:

B. Potassium

Explanation:

Potassium

Select each process that shows a physical change. Select all that apply. Several logs chopped into pieces. Chopping Wood Logs burning as in a campfire. Burning Wood A pot of water on a grate over a burning fire. Heating Water A marshmallow on a stick held above a fire. Roasting Food

Answers

Answer:

Chopping wood logsA pot of water o a grate over a burning fire

Explanation:

Physical change is easily reversible. Burning/combustion is a chemical process where substances react rapidly with oxygen: this is usually irreversible.

The marshmallow, roasted food and burned wood all undergo combustion and hence are tagged chemical changes.

I hope this helps.

Answer:

Chopping Wood

Heating Water

Explanation:

If an object increases in speed, it must be as a result of
o increasing friction.
o unbalanced forces.
O gravitational attraction.
O air resistance.

please hurry i’m taking a test

Answers

Answer:

a; increasing fraction

Explanation:

the boiling point of ethanol is 78.40 C. A student conducts an experiment and finds a boiling point of 75.70 C. What is the student's
percent error ?

Answers

Answer:

3.40% corrected to 1dp

Explanation:

78.4-75.7=2.7

percentage error = error/original value× 100

= 2.7/78.40×100

= 3.44387755102040

= 3.40% corrected to 1dp

Using triangulation which point is the earthquakes epicenter?

Answers

Answer:

free points aye

Explanation:

Answer: 3

Three is where the earthquakes epicenter is.

Plz mark brainliest:)

How many atoms of each element are in one molecule of 2-heptanone?​

Answers

A chemical structure of a molecule includes the arrangement of atoms and the chemical bonds that hold the atoms together. The 2-HEPTANONE molecule contains a total of 21 bond(s) There are 7 non-H bond(s), 1 multiple bond(s), 4 rotatable bond(s), 1 double bond(s) and 1 ketone(s) (aliphatic).

How many moles of Al are there in 20g of Al2(C2O4)3?

Answers

Gujddbjjkkoyudcvhu vguu

express the answer to each of the following calculations in scientific notation with the correct number of significant figures: 45.0 x 270

Answers

Answer: 1.215 × 10^4  i think

Explanation:

The charged particles in the beams that Thomson studied came from atoms. As these particles moved away from their original atoms, they formed a visible beam. The current model of the atom includes protons, neutrons, and electrons. What is the best use of an atomic model to explain the charge of the particles in Thomson's beams? An atom's negative particles are surrounded by positive matter, so the positive particles are easier to remove. An atom's positive particles are surrounded by negative matter, so the negative particles are easier to remove. An atom's smaller negative particles are at a distance from the central positive particles, so the negative particles are easier to remove. An atom's larger positive particles are at a distance from the central negative particles, so the positive particles are easier to remove.

Answers

Answer:An atom's positive particles are surrounded by negative matter, so the negative particles are easier to remove.

Explanation:

From our knowledge of the atom, we know that the nucleus lies at the center of the atom. The nucleus is positively charged because it contains the positive particles in the atom

The negative matter (electrons) surround the positive matter (protons) hence it is easier to remove the negative particles compared to the positive particles.

Answer:

C

Explanation:

5. A guava with a mass of 0.200 kg has a weight of
A. 0.200 N
B. 1.96 N
C. 4.50 N
D. 10.0 N

Answers

The magnitude of gravity is equivalent to about 9.8m/s^2

Weight by definition is mass multiplied by gravity. Do 0.2*9.8 to get 1.96 Newtons

A guava with a mass of 0.200 kg has a weight of 1.96N

HOW TO CALCULATE WEIGHT:

The weight of an object is its mass with respect to gravity. That is, the weight of an object, which is a force measured in Newton (N) can be calculated as follows:

F = mass (m) × acceleration due to gravity (a)

The mass of the guava in this question is given as 0.200kg, hence, the weight is calculated as follows:

F = 0.200g × 9.8m/s²

F = 1.96N

Hence, a guava with a mass of 0.200 kg has a weight of 1.96N.

Learn more: https://brainly.com/question/23312072?referrer=searchResults

Regina conducted an investigation to determine whether earthworms add nutrients to soil. She used two pots of soil. She added three earthworms to the first pot. She did not add any earthworms to the second pot, which was the control. Regina tested the nutrient levels of the soil in both pots after two weeks. What type of investigation is Regina conducting?

Answers

The question is incomplete, the complete question is:

Regina conducted an investigation to determine whether earthworms add nutrients to soil. She used two pots of soil. She added three earthworms to the first pot. She did not add any earthworms to the second pot, which was the control. Regina tested the nutrient levels of the soil in both pots after two weeks.

What type of investigation is Regina conducting?

descriptive

comparative

experimental

procedural

Answer:

experimental

Explanation:

In an experimental study, there is an independent variable, a dependent variable and a set up meant for control.

The control is set up to establish the validity of the study.

Experiments are designed to establish cause and effect relationship. In this case, the experiment was designed to establish weather earthworms add nutrient to the soil.

Answer:

experimental

Explanation:

experimental

A) saturated
B)desaturated
C)unsaturated
D)supersaturated

Answers

Answer:

No Its B Unsaturated becuase the line is slanted

Explanation:

A high concentration of hydrogen ions means a solution is what?


A. very acidic


B. neither acidic or basic


C. neutral


D. very basic

Answers

A. very acidic because the the solution is very concentrated

Write the balanced symbol equation for the electrolysis of aluminium oxide to produce aluminium, and the reduction of iron oxide with carbon to produce iron.


Then use that to calculate the atom economy for each.

Answers

Answer:

Electrolysis of Al₂O₃: 4Al³⁺ (s) + 6O²⁺ (g) → 4Al (s) + 3O₂ (g)

Reduction of Elemental Fe: 2Fe₂O₃ (s) + 3C (s) → 4Fe (s) + 3CO₂ (g)

Atom Economy for Electrolysis of Al₂O₃: 52.9227%

Atom Economy for Reduction of Fe₂O₃: 62.8534%

Explanation:

Step 1: Define Compounds

Aluminum Oxide - Al₂O₃

Iron Oxide - Fe₂O₃

Step 2: RxN

Al₂O₃ (s) → Al (s) + O₂ (g)

Fe₂O₃ (s) + C (s) → Fe (s) + CO₂ (g)

Step 3: Balance RxN

2Al₂O₃ (s) → 4Al (s) + 3O₂ (g)

We need the same number of O on both sides (6 is the LCM)We will also need to balance the number of Al on both sides due to the change of O (4 reactant/product)

This is ONLY the decomposition reaction for Aluminum oxide, NOT the electrolysis.

2Fe₂O₃ (s) + 3C (s) → 4Fe (s) + 3CO₂ (g)

We need the same number of O on both sides (6 is the LCM)We will also need to balance the number of Fe on both sides due to the change of O (4 reactant/product)We will also need to balance the number of C on both sides due to the change of O (3 reactant/product)

This is the final single-replacement reaction for the reduction of Iron Oxide to Iron.

Step 4: Electrolysis of Al₂O₃

We will have to use oxidation-reduction reactions (half-reactions). Let's break up the reaction into it's elements.

Al³⁺ + ? → Al

To make the ion Al³⁺ turn into its neutral atom, we will need to add 3e⁻ to balance the half reaction

Al³⁺ + 3e⁻ → Al

O²⁻ → O₂ + ?

Oxygen is a diatomic element, and in it's natural state is bonded to itself. We need to balance the half reaction

2O²⁻ → O₂ + ?

We need to figure out how much electrons the ion O²⁻ loses to turn into its neutral atom. We see that we will need to lose 4e⁻

2O²⁻ → O₂ + 4e⁻

Our half reactions:

Al³⁺ + 3e⁻ → Al

2O²⁻ → O₂ + 4e⁻

We now need balance the entire half reaction. Our LCM is 12

4 (Al³⁺ + 3e⁻ → Al) = 4Al³⁺ + 12e⁻ → 4Al

3 (2O²⁻ → O₂ + 4e⁻) = 6O²⁻ → 3O₂ + 12e⁻

Add the 2 half reactions

4Al³⁺ + 12e⁻ + 6O²⁺ → 4Al + 3O₂ + 12e⁻

Cancel out spectator ions/e⁻ to get our final half reaction

4Al³⁺ (s) + 6O²⁺ (g) → 4Al (s) + 3O₂ (g)

Step 5: Atom Economy

According to GCSE and my own deciphering, your equation for Atom Economy is essentially calculating for something similar to percent yield (but not quite).

[tex]Atom \hspace{3} Economy \hspace{3} = \hspace{3} \frac{Molar \hspace{3} Mass \hspace{3} of \hspace{3} Product}{Molar \hspace{3} Mass \hspace{3} of \hspace{3} All \hspace{3} Reactants} \cdot 100 \%[/tex]

4Al³⁺ (s) + 6O²⁺ (g) → 4Al (s) + 3O₂ (g)

Molar Mass of Al - 26.98 g/mol

Molar Mass of O - 16.00 g/mol

Reactants: 4(26.98 g/mol) + 6(16.00 g/mol) = 203.92 g/mol

Products (Al as end product): 4(26.98 g/mol) = 107.92 g/mol

[tex]Atom \hspace{3} Economy \hspace{3} = \hspace{3} \frac{107.92 \hspace{3} g/mol}{203.92 \hspace{3} g/mol} \cdot 100 \%=52.9227 \%[/tex]

2Fe₂O₃ (s) + 3C (s) → 4Fe (s) + 3CO₂ (g)

Molar Mass of Fe - 55.85 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of C - 12.01 g/mol

Reactants: 4(55.85 g/mol) + 6(16.00 g/mol) + 3(12.01 g/mol) = 355.43 g/mol

Products (Fe as end product): 4(55.85 g/mol) = 223.4 g/mol

[tex]Atom \hspace{3} Economy \hspace{3} = \hspace{3} \frac{223.4 \hspace{3} g/mol}{355.43 \hspace{3} g/mol} \cdot 100 \%=62.8534\%[/tex]

Step 6: Check for significant figures

Since we are not given any values, we don't really need to change any numbers to fit sig fig rules.

How many atoms are present in 7.50 mol of chlorine atoms? _

Answers

Answer:

4.52 x 10²⁴ atoms Cl

Explanation:

A mole is a name that means a certain number like a dozen means 12. 1 mole of chlorine atoms is 6.022 x 10²³ chlorine atoms. The unit conversion is 6.022 x 10²³/mol.

[tex]7.50molCl*\frac{6.022 x 10^{23} atomsCl}{1molCl} = 4.5165*10^{24} atomsCl[/tex]

Round to 4.52 x 10²⁴ atoms Cl for the correct number significant figures.

A piece of metal with a volume of 2.45 mL has a density of 4.255g/mL. What is the mass of the metal?

Answers

Answer:

The answer is 10.42 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question

volume = 2.45 mL

density = 4.255g/mL

We have

mass = 2.45 × 4.255 = 10.42475

We have the final answer as

10.42 g

Hope this helps you

if water is raise up by 50K and it takes 20900J to do it, what is the mass of the water? ​

Answers

Answer:

100g

Explanation:

_________ are elements of the same element that have a different _______________ due to a different number of _____________.

Answers

Answer: Isotopes

Explanation:

The atoms of a chemical element can exist in different types. These are called isotopes. They have the same number of protons (and electrons), but different numbers of neutrons. Different isotopes of the same element have different masses.

Hope this helps!

Part B
4.80 x 1022 molecules of propane, C3Hg.
Express your answer with the appropriate units.
Calculate the mass in grams

Answers

The correct answer is:

3.50 grams

If a building is anchored into the ground, it
A. was constructed on that particular spot many years ago
B. has water and electrical resources available
C. is built on a solid foundation and unlikely to shift
D. is likely to be damaged due to land subsidence
Please select the best answer from the choices provided
O A
c
B
U
a
D

Answers

Answer: C. Is built on a solid foundation and unlikely to shift

Explanation: If a building is anchored into the ground, it is built on a solid foundation and unlikely to shift .

Answer:

C. Is built on a solid foundation and unlikely to shift

Explanation:

Tetrachloromethane,CC15,is classified as a

Answers

Correct Answer: compound because the atoms of the elements are combined in a fixed proportion.

How can changes in temperature cause movement of air and other fluids on Earth? , “information I found on the Internet”

Answers

Answer:

Winds are a result of the tendency of warm air to rise and, conversely, cool air to sink. ... Because the atmosphere constantly flows, like a fluid in a container, air rushes into such low pressure areas from cooler, high-pressure ones, and the movement of the air creates wind.

Other Questions
In the French language, do they use the word 'have' for obligations as in English? For example, I have to do it. J'ai le faire. Prepare an adjusted trial balance. If an amountLedger Accounts, Adjusting Entries, Financial Statements, and Closing Entries; Optional Spreadsheet.The unadjusted trial balance of Recessive Interiors at January 31, 2019, the end of the year, follows: Debit Balances Credit Balances 11 Cash 13,100 13 Supplies 8,000 14 Prepaid Insurance 7,500 16 Equipment 113,000 17 Accumulated DepreciationEquipment 12,00018 Trucks 90,000 19 Accumulated DepreciationTrucks 27,10021 Accounts Payable 4,50031 Jeanne McQuay, Capital 126,40032 Jeanne McQuay, Drawing 3,000 41 Service Revenue 155,00051 Wages Expense 72,000 52 Rent Expense 7,600 53 Truck Expense 5,350 59 Miscellaneous Expense 5,450 325,000 325,000The following additional accounts from Recessive Interiors' chart of accounts should be used: Wages Payable, 22; Depreciation Expense-Equipment, 54; Supplies Expense, 55; Depreciation Expense-Trucks, 56; Insurance Expense, 57.The data needed to determine year-end adjustments are as follows:Supplies on hand at January 31 are $2,850.Insurance premiums expired during the year are $3,150.Depreciation of equipment during the year is $5,250.Depreciation of trucks during the year is $4,000.Wages accrued but not paid at January 31 are $900.Required:Journalize the adjusting entries. Assume that 20 percent of the dynamic count of the instructions executed for a program are branch instructions. Delayed branching is used, with one delay slot. Assume that there are no stalls caused by other factors. First, derive an expression for the execution time in cycles if all delay slots are filled with NOP instructions. Then, derive another expression that reflects the execution time with 70 percent of delay slots filled with useful instructions by the optimizing compiler. From these expressions, determine the compilers contribution to the increase in performance, expressed as a speedup percentage. How would you feel if you were in the American colonists place. This is a 2x2 identity matrix:True Or False WILL THANK, GIVE BRAINLEST, AND GIVE FIVE STARS TO FIRST AWANSER IF IT'S RIGHTq1:how many baby elephants were weighed q2:Which group weighed the most per item on the scale? How much did it weigh?q3:Which group weighed the least per item on the scale? How much did it weigh?You dont have to show your work Help!Which solution(s) are correct? -18 divided by 3 give me a answer WRITE A COMPOUND INEQUALITY FOR EACH GRAPH PLEASEEE HELP DUE IN !) MINUTES!!!!! Given the following equation:4 NH_3(g) + 5 O_2(g) 4 NO(g) + 6 H_2O(l)How many grams of H_2O is produced if 66.60 grams of NO is produced? Which only lists multiples of 16? O1,2,4, 8, 16 O 16, 24, 32, 40 O16, 32, 48, 64 O 1,2, 4, 8, 12, 16 how do i graph x = -1 Professor Florido is studying a new hybrid watermelon. She knows that a watermelon seed has probability 0.88 of germinating. She decides to plant 5 seeds. (a) What is the probability that exactly 2 seeds will germinate? ( Round to 4 decimals) (b) What is the probability that at most 3 seeds will germinate? ( Round to 4 decimals) Use the information to answer the question,The graph of a linear system is shownIdentiWhat is the solution to this linear system? inter a value in each box to create an ordered pair The history of planet earth readworks what led to the american dorminance in the early 20th century X=2 x=1 x=1 6(0.5x1.5)+2x=9(x+6) x = 2 6 ( 0.5 x 1.5 ) + 2 x = 9 ( x + 6 ) x = 1 6 ( 0.5 x 1.5 ) + 2 x = 9 ( x + 6 ) x = 1 6 ( 0.5 x 1.5 ) + 2 x = 9 ( x + 6 ) 4(0.5x2)+3x=14(x+6) x = 2 4 ( 0.5 x 2 ) + 3 x = 14 ( x + 6 ) x = 1 4 ( 0.5 x 2 ) + 3 x = 14 ( x + 6 ) x = 1 4 ( 0.5 x 2 ) + 3 x = 14 ( x + 6 ) 8(0.5x3)+4x=9(x+6) For science class, Zahra wanted to take notes in a visual way. She also wanted to be able to break down large concepts into smaller components.Which note-taking method would be Zahra's best choice?Cornelloutliningmappingcharting Which geographic characteristic did most of the English colonies share?A. Most were located in warm climates.B.Most had their populations concentrated near the coast.c. Most had rich soil and good farmlandD. Most established representative governments. Which of the following is NOT a cue for dribbling?