what is the smallest planet of the inner planets and look very much like earth's moon?

Answer:

  58.7Ω

Explanation:

You want the equivalent resistance of 40Ω in series with the parallel combination of 25.4Ω and 70.8Ω.

The equivalent resistance of two parallel resistors, r1 and r2 is ...

  req = 1/(1/r1 +1/r2)

For the two given parallel resistors, that is ...

  1/(1/25.4 +1/70.8) ≈ 18.69 . . . . ohms

The circuit has a 40Ω resistor in series with this, so the equivalen resistance is ...

  40 +18.69 = 58.69Ω ≈ 58.7Ω

__

Additional comment

Since the given resistor values are expressed to 0.1 ohms, we have rounded the answer to the same precision. The exact value is 141158/2405 as shown in the calculator display—assuming the given values are exact.

The magnitude of the electrostatic force experienced by the positive charge is equal to the magnitude of the Coulomb force, which is given by F = k*|q1|*|q2|/r², where k is the Coulomb constant, q1 and q2 are the charges

The Coulomb (symbol: C) is a unit of electric charge that is named after the French physicist Charles-Augustin de Coulomb. This unit is used to measure the magnitude of electric charge, electric potential, and electric field strength. It is equal to the charge of one electron, which is equal to 1.602 x 10-19 Coulombs of charge. The Coulomb is a fundamental unit in electrical engineering and physics and is used to calculate the force between two charged particles. It is also used to measure electrical capacitance and electric dipole moments.

To learn more about Coulomb

https://brainly.com/question/506926

#SPJ4

Answer:

20kw twice the work

Explanation:

The formula of a spring-mass-damper system is given by md2x/dt2 + cdx/dt + kx = F(t).

The spring-mass-damper system is a common model used in physics and engineering to describe the behavior of various mechanical systems, such as a car suspension system or a building during an earthquake. The equation of motion for a spring-mass-damper system is typically given by:

md2x/dt2 + cdx/dt + kx = F(t)

where m is the mass of the object attached to the spring and damper, x is the displacement of the mass from its equilibrium position, t is time, c is the damping coefficient, k is the spring constant, and F(t) is an external force applied to the system at time t.

The term md2x/dt2 represents the acceleration of the mass, while cdx/dt represents the damping force (i.e. resistance to motion) caused by the damper, and kx represents the force exerted by the spring. The external force F(t) can be any force applied to the system, such as an oscillating force or a constant force.

The solution to this differential equation depends on the initial conditions (i.e. the initial position and velocity of the mass) and the specific values of the parameters m, c, and k. The behavior of the system can be analyzed using various techniques, such as finding the natural frequency of the system or using numerical simulations to model the motion over time.

For such more questions on Equilibrium

https://brainly.com/question/517289

#SPJ4

The block moves at a speed of 40 m/s2 when it reaches the equilibrium point after being freed from the 5-cm displacement point.

Indian culture considers the months of March and April to be the start of spring, with an average high temperature of about 32 °C. Ugadi, the springtime celebration of some Indians, is notably popular in the state of Karnataka.

Springs play a crucial role in many complex physical systems because they provide as straightforward models for them. As you continue studying physics, you will see SHM repeatedly as it describes how things that behave like springs behave. the spring constant being denoted by k.

To know more about Spring visit:

https://brainly.com/question/14670501

#SPJ4

Answer:

a = V^2 / r        centripetal acceleration

a = F / m       given F (radial) = 30 N

1)      a = 30 N / 6 kg = 5 m/s^2        centripetal acceleration

2) V^2 = a r = 5 m/s^2 * .03 m = .15 m^2 / s^2

V = .39 m/s

3) I assume "with" should read "without"  otherwise the question can't be answered

a = V^2 / (2 * r)         if the radius is doubled then the acceleration is halved

Newton concluded that gravity had to be mutual and universal because of his laws of motion. According to these laws, every action must have an equal and opposite reaction.

So, when an object attracts another object, the second object must also attract the first. This attraction must exist between all objects in the universe, thus making gravity mutual and universal.

Sir Isaac Newton's laws of motion, which were published in 1687, describe the motion of all objects in the universe.

The first law states that an object will remain at rest or move in a straight line unless an external force acts on it. The second law states that an object will accelerate when an external force acts on it.

From this, Newton concluded that if one object attracted another, then the second object must also be attracted to the first.

Therefore, Newton concluded that gravity was a mutual and universal force that acted between all objects in the universe.

He reasoned that since this force was mutual and acted on all objects, it must be the same force that kept the planets in orbit around the Sun.

This idea of universal gravity was revolutionary and changed the way people thought about the universe.

By demonstrating that all objects in the universe were subject to the same force, Newton showed that the universe was interconnected in a way that had never been seen before.

To know more about laws of motion,

https://brainly.com/question/28171613

#SPJ4

The work completed should be comparable in all three circumstances.

The body's work is equal to mgH. (Gravitational potential energy).

Gravity and the normal force are both at work on a body descending a frictionless inclined plane. It won't make a difference to the gravitational potential energy.

We can find out an object's actual size by knowing how far away it is. The area an object occupies in space above us can be measured. Once we know how far away it is, we can calculate its true size.

Length is an item's general motion in a purposeless fashion. Distance can be thought of as the amount of space a thing has traveled since it first appeared.

To know more about Distance visit:

https://brainly.com/question/15172156

#SPJ4

Answer: the runner's change in momentum is 172.8 kg·m/s.

Explanation:

To find the change in momentum of the runner, we can use the equation:

change in momentum = mass x change in velocity

The mass of the runner is given as 48 kg, and the change in velocity can be calculated as:

change in velocity = final velocity - initial velocity

change in velocity = 8.7 m/s - 5.1 m/s

change in velocity = 3.6 m/s

Therefore, the change in momentum of the runner is:

change in momentum = mass x change in velocity

change in momentum = 48 kg x 3.6 m/s

change in momentum = 172.8 kg·m/s

So the runner's change in momentum is 172.8 kg·m/s.

In a vacuum, a feather and a coin will fall with equal acceleration, but not with equal forces, momentum, or kinetic energy.

Because the acceleration caused by gravity is constant, all objects in free fall will experience the same acceleration, which is around 9.8 m/s2, regardless of their mass. This implies that in a vacuum, the feather and the coin will descend at the same pace.

To know more about kinetic energy , check out :

https://brainly.com/question/25959744

#SPJ1

The Sun is tons large than the Earth, with a radius of about 695,700 kilometers, while the earth has a radius of around 6,371 kilometers.

Because of this, the Sun's radius is greater than one hundred times larger than the earth's. The size difference between the Sun and the earth is quite massive.

In fact, if you have been to compare the sizes of the 2 items visually, the sun might appear as a huge, sparkling ball in the sky, while the earth might be just a tiny dot in contrast.

The sun's gigantic size performs a crucial position in the formation and renovation of our sun machine. Its gravity is chargeable for keeping all the planets in orbit, inclusive of the earth.

Additionally, the sun's excessive warmth and radiation provide the electricity important for existence to exist in the world. Standard, the sun's radius is an awful lot larger than earth's, and this size distinction has essential implications for the structure and behavior of our solar gadget.

Learn more about Earth:

https://brainly.com/question/12041467

#SPJ4

The velocity of the car at position B would be 34.7 m/s.

The energy of the body due to its position in relative to earth is called potential energy.

Given is that a roller coaster car of mass m = 200 kg is released from rest at the top of a 60m high hill (position A), and rolls with negligible friction down the hill, through a circular loop of radius 20 m (positions B, C, and D), and along a horizontal track (to position E).

From the energy conservation, we can write -

mgh = 1/2 mv²

60 x 10 x 200 = 1/2 x 200 x v²

v² = 1200

v = √1200

v = 34.7 m/s

Therefore, the velocity of the car at position B would be 34.7 m/s.

To solve more questions on energy conservation, visit the link below -

https://brainly.com/question/2137260

#SPJ9

Answer:

Viking 1 had reached a top speed of over 4 kilometers per second, or almost 9000 miles per hour. This is a fair bit over 10 times the speed of sound (in air), making it well over supersonic speeds.

According to extensive spectroscopic studies, it became clear that the hydrogen: helium ratio is proven to be 3:1. Along with the scarcity of other elements gives clues that supports Big Bang.

Before big bang all the atoms and molecules were dissociated and ionized. because the temperature was very higher. After Big Bang happened, the temperature falls down rapidly, and all ions fused to form atoms and molecules. Since the process was much faster protons and neutrons collided to form deuterium, Collision between deuterium and protons and neutrons occurred resulting in tritium and helium. A small amount of lithium was also formed. Formation of heavier atoms have not occurred because the process was rapid.

Almost all the matter were formed during this small time. Because of the rapid process hydrogen formed more constituting the 74% and helium next constituted 23-24%. All other elements were gradually formed during stellar evolutions. But still now the constitution of nuclear matter remains the same.

So the unchanging ratio supports the Big Bang theory.

For more information regarding Big Bang theory, kindly refer

https://brainly.com/question/9382791

#SPJ4

Kinetic molecular theory states that gas particles are in constant motion and exhibit perfectly elastic collisions.

The assumption that matter is made up of microscopic particles that are always in motion is the foundation of the kinetic-molecular theory, a theory that describes the states of matter.

However, the theory is most simply understood when it is applied to gases, therefore this is where our in-depth study will start. The theory especially pertains to the ideal gas model of a gas. An ideal gas is a hypothetical gas whose behaviour exactly matches all of the kinetic-molecular theory's presumptions. Although they are not perfect in actuality, gases come extremely close to being perfect in most real-world situations.

To know more about the kinetic-molecular theory, here

brainly.com/question/134712

#SPJ4

Since it focuses on measuring, analyzing, and testing hypotheses, primary literature descriptions of original study produced by the are occasionally referred to as empirical research.

Observations made under controlled circumstances as opposed to through other forms of empirical study constitute experimental evidence. Researchers can deduce causes for a behavior they are studying thanks to experimental energy .

True experiments and quasi-experimental designs are the two broad categories into which experimental research can be divided. Both designs call for the manipulation of the treatment; but, whereas real experiments also call for randomization, quasi-experiments do not.

To know more about energy visit :

https://brainly.com/question/2409175

#SPJ4

Copernicus proposed the heliocentric theory of the solar system, in which the sun is positioned at the system's centre.

In his heliocentric theory, Copernicus predicted the arrangement of all known planets and calculated their average orbital periods around the sun.He was also effective in explaining the everyday motions of heavenly bodies, such as the sun's rising and setting, with this idea.He said that the sun is fixed and situated at the centre of the solar system under this hypothesis.This model provided a mathematical explanation for the apparent daily motion of the stars and planets, and it also allowed for better predictions of their positions in the sky.

read more about Copernicus here

https://brainly.com/question/926131

#SPJ4

The period of the pendulum will increase by a factor of √2 when the mass is replaced by a mass that is twice as large, but the amplitude is increased by a factor of 2.

The period of a simple harmonic oscillator, such as a mass hanging from a spring, is given by:

T = 2π√(m/k)

where T is the period, m is the mass, and k is the spring constant.

If we replace the original mass with a new mass that is twice as large, the period will change as follows:

T' = 2π√(2m/k)

where T' is the new period.

If we also increase the amplitude of the motion by a factor of 2, this will not affect the period of the pendulum. The period depends only on the mass and the spring constant, and is independent of the amplitude of the motion.

Therefore, the new period of the pendulum will be:

T' = 2π√(2m/k)

which is equal to the original period multiplied by the square root of 2.

Learn more about pendulum here:

https://brainly.com/question/26524032

#SPJ4

True.

Early February is halfway between the winter solstice and the spring equinox in the Northern Hemisphere.

The winter solstice occurs around December 21st or 22nd and marks the shortest day and longest night of the year. The spring equinox occurs around March 20th or 21st and marks the start of spring, when the day and night are roughly equal in length. Halfway between these two events is approximately February 10th, marking the gradual shift from winter to spring.

The winter solstice marks the point when the sun is at its farthest point from the equator and the Northern Hemisphere is tilted away from the sun, causing the shortest day and longest night of the year. On the other hand, the spring equinox marks the point when the sun is directly over the equator and the day and night are approximately equal in length.

Halfway between the winter solstice and the spring equinox is a time when the days start to get noticeably longer and the sun rises higher in the sky, signaling the end of winter and the beginning of spring. This is a gradual transition and not a sudden change. In early February, the sun rises earlier and sets later, and the length of daylight continues to increase until the spring equinox.

In the Northern Hemisphere, early February is a time when the weather starts to warm up and the first signs of spring become visible, such as the emergence of buds on trees and the first crocus flowers in gardens. However, it is still winter and the weather can be cold and wintry.

In the Southern Hemisphere, early February is the height of summer, with warm temperatures and longer daylight hours. This is the opposite of the Northern Hemisphere, where it is the height of winter.

To know more about solstice & equinox, visit:

brainly.com/question/11549647

#SPJ4

The eight planets in our solar system, including Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, are on the ecliptic plane.

The ecliptic plane is defined as the imaginary plane in space that contains Earth's orbit around the sun. Since all of the planets in our solar system orbit the sun, they are also on this same plane. The planets' orbits are not perfect circles, but are rather slightly elliptical, meaning they can vary slightly from the ecliptic plane.

However, in general, the planets stay relatively close to the ecliptic plane as they orbit the sun. This is significant because it allows astronomers to make predictions and observations about the planets' movements and positions in the sky.

To know more about the planets, here

brainly.com/question/14581221

#SPJ4

Mechanical waves can be defined as one whereby 1. They are waves that require some form of matter as a medium.

An oscillation of matter known as a mechanical wave is what is responsible for the transmission of energy via a medium. The transmission medium sets a restriction on how far a wave can travel. In this instance, there is almost little translational motion and the oscillating material rotates around a fixed point.

A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium. A mechanical wave is something like a sound wave.

Therefore, option 1 is correct.

Learn more about Mechanical waves at:

https://brainly.com/question/26116832

#SPJ1

Answer:

1.

Explanation:

i did test

Precession is the change in direction of axis without change in tilt. Whereas nutation is the rocking, swaying, or nodding motion in the axis of rotation.

Precession and nutation are due to gravity of nearer Earth and farther Sun on the Earth that varies with changing distance. The inclination 5 deg of orbital plane of Moon to the Earth's orbital plane and the inclination of equatorial bulge of the Earth at 23.4 deg to ecliptic are also contributors.

Period of long-term precession motion is about 260 centuries. In this motion, poles trace small circle of radius almost 2530 km, about normal to ecliptic. The short-term nutation (nodding) of polar axis is having compounded period of almost 18.6 years from oscillations with smaller periods up to as low as some days.

To know more about precession and nutation, refer

https://brainly.com/question/28587498

#SPJ4

The theory of change Lewin is a framework used to analyze and understand how a certain change can be achieved in a given situation.

The theory of change Lewin was developed by Kurt Lewin, a social psychologist who studied how to bring about change in organizations and communities. The theory explains that any change process involves three main stages: unfreezing, changing, and refreezing.

Unfreezing is when people become aware that change is necessary and are willing to let go of old habits and beliefs. Changing is the actual implementation of new behaviors and practices. Refreezing is when the new behaviors become the norm and are reinforced to ensure sustainability.

To know more about the Lewin, here

brainly.com/question/27334968

#SPJ4

A very long solid nonconducting cylinder of radius is a three dimensional object that is cylindrical in shape and has a very large length in comparison to its radius. 

The cylinder is made of a nonconducting material which means that it does not conduct electricity. This type of cylinder can be used in a variety of applications such as insulating materials or structural support.. The radius of the cylinder refers to the distance from the center of the cylinder to its outer edge. The larger the radius: the greater the volume of the cylinder.

This means that a larger radius cylinder would be more useful in applications where a greater amount of material is required.

Learn more about nonconducting cylinder brainly.com/question/14582654

#SPJ4

Answer: Evaporation happens when a liquid substance becomes a gas. When water is heated, it evaporates. The molecules move and vibrate so quickly that they escape into the atmosphere as molecules of water vapor

Explanation: Evaporation is simply the heating of water to turn it to gas,like when you boil water in a kettle,that process is defined as evaporation

The earliest known measurement of the circumference of the earth used is called ;  Eratosthenes' Method.

The measurement is the process of determining the size, amount, or degree of something. Measurement can involve counting, weighing, or measuring physical characteristics such as length or volume. It can also involve observing or assessing behavior, or determining the amount or degree of something that cannot be physically measured, such as intelligence or happiness. Measurement is an important tool in many fields, including science, economics, engineering, and industry. Measurements are often used to compare different items or to track changes over time.

To learn more about measurement

https://brainly.com/question/29223620

#SPJ4

The earliest known measurement of the circumference of the earth used is called ;  Eratosthenes' Method.

The measurement is the process of determining the size, amount, or degree of something. Measurement can involve counting, weighing, or measuring physical characteristics such as length or volume.

It can also involve observing or assessing behavior, or determining the amount or degree of something that cannot be physically measured, such as intelligence or happiness.

Measurement is an important tool in many fields, including science, economics, engineering, and industry. Measurements are often used to compare different items or to track changes over time.

To learn more about measurement

https://brainly.com/question/27122947

#SPJ4

Speed of the bricks at the top of hill is 6.26 m/s. c.)speed of the bricks at the top of hill is 14.14 m/s. d)minimum compression of spring necessary to get to the top of hill is 6.26 m. e) speed of the bricks at the top of hill with 2 m of initial compression and 15% energy dissipation is 13.04 m/s.

The capacity or power to do work, such as the capacity to move an object by application of force is called energy.

Initial potential energy of compressed spring is:

Ep = 1/2 kx^2 = 1/2 * 500 N/m * (2 m)^2 = 1000 J

k is spring constant, x is compression of the spring, and J is unit of energy in joules.

Final potential energy of the bricks is:

Ep = mgh = 100 N * 9.81 m/s^2 * 2 m = 1962 J

Ep = Ep

1/2 kx^2 = mgh

v = sqrt(2gh) = sqrt(2 * 9.81 m/s^2 * 2 m) = 6.26 m/s

Therefore, the speed of the bricks at the top of the hill is 6.26 m/s.

c.  Initial potential energy of compressed spring is: 1000 J

Ek = Ep = 1000 J

Kinetic energy of the bricks is given by:

Ek = 1/2 mv^2

1000 J = 1/2 * 100 N * v^2

v = sqrt(200 / 1) = 14.14 m/s

Therefore, the speed of the bricks at the top of the hill is 14.14 m/s.

d.  As, Ep = m g h

where m is mass of the bricks, g is acceleration due to gravity, and h is  height of the hill.

Ep = 100 N * 9.81 m/s^2 * 2 m = 1962 J

Ep = 1/2 kx^2 = 1962 J

1/2 * 500 N/m * x^2 = 1962 J

x = sqrt(2 * 1962 J / 500 N/m) = 6.26 m

Therefore, the minimum compression of the spring necessary to get to the top of the hill is 6.26 m.

e. If 15% of the energy is dissipated through friction, final kinetic energy of the bricks at the top of the hill will be 85% of initial potential energy of the compressed spring. Therefore,

0.85 * 1000 J = 1/2 mv^2

v = sqrt(170 / 1) = 13.04 m/s

Therefore, the speed of the bricks at the top of the hill with 2 m of initial compression and 15% energy dissipation is 13.04 m/s.

To know more about energy, refer

https://brainly.com/question/13881533

#SPJ1

When you put your magnet near a wire hoop with a different number of loops, the rate of rotation will depend on the number of loops in the wire hoop.

The greater the number of loops, the greater the induced current and the stronger the magnetic field. This results in a greater torque on the wire hoop and a faster rate of rotation. On the other hand, a wire hoop with a smaller number of loops will have a weaker induced current and magnetic field, resulting in a slower rate of rotation.

Therefore, the rate of rotation of the wire hoop will depend on the number of loops in the wire hoop, with more loops resulting in a greater rate of rotation and fewer loops resulting in a slower rate of rotation.

Learn more on wire hoop here: https://brainly.com/question/14284116

#SPJ1

The magnetic field at a point 1.0 cm from the central axis of the solenoid is 1.6 x 10^-3 T.

The magnetic field (B) inside a solenoid can be calculated using the formula:

B = μ_0 * n * I / L

where μ_0 is the vacuum permeability (4π x 10^-7 T m/A), n is the number of turns per unit length, I is the current in the solenoid, and L is the length of the solenoid.

For the given solenoid, the number of turns per unit length can be calculated as follows:

n = 800 turns / 0.5 m

n = 1600 turns/m

At a point 1.0 cm from the central axis of the solenoid, the magnetic field can be calculated as follows:

B = μ_0 * 1600 turns/m * 12 A / (0.05 m)

B = 1.6 x 10^-3 T.

To learn more about Magnetic field :

https://brainly.com/question/15087940

#SPJ4

At points along the line connecting the two sources, the two sources of radio waves interfere with each other. This interference can result in constructive or destructive interference, depending on the relative phase of the waves at the point of interest.

If the two waves have the same phase, they will reinforce each other, resulting in constructive interference and a maximum in the total amplitude of the waves. If the two waves have a phase difference of 180 degrees, they will cancel each other out, resulting in destructive interference and a minimum in the total amplitude of the waves.

The phase difference between the two waves at a given point along the line connecting the two sources can be calculated using the difference in the path lengths from the two sources to the point. The path difference is given by:

d = (2n + 1) λ/2

where n is an integer, λ is the wavelength of the radio waves, and d is the path difference. For constructive interference, the path difference must be an integer multiple of λ, while for destructive interference, it must be an odd multiple of λ/2.

So, considering the two sources of radio waves a and b are 5.00 meters apart and each source emits waves with wavelength 6.00 meters, the path difference between the two waves at a given point along the line connecting the two sources can be calculated as d = 5.00 meters. Based on the equation above, this corresponds to a phase difference of approximately 150 degrees, resulting in destructive interference at that point.

Learn more about radio waves:

https://brainly.com/question/69373

#SPJ4