Answer:
thermometer
Explanation:
The most important tool to use when collecting data relating to how thermal energy affects metals would be the thermometer.
The thermometer is an instrument used to measure temperatures and the temperature of a body is a measure of the amount of thermal energy present in the body.
In order to obtain data relating to how thermal energy affects metals, the most important variable to take note of would be the thermal energy of the metals and this can only be done by the thermometer.
if hydrochloride tablets and MP4 format you find the attachment photograph and signature
answer is attached in the image below
Answerme espanol amigo me
Explanation:
The element in group 4 and period 3
what is the boiling point of carbon?
Answer: 3915 K (3642 °C, 6588 °F)
Answer:
8,721°F
OR
4,827°C.
Explanation:
Good Luck!
Oil and water placed in a jar will separate. Even when shaken and mixed, the oil still separates from the water.
Which best describes oil and water?
Oil and water are highly soluble because they have separate chemical properties.
Oil and water have a low solubility because they have separate chemical properties.
Oil and water are highly soluble because they exert different pressures.
Oil and water have a low solubility because they exert different pressures.
Answer:
Probably B?
Explanation:
I don't have one...
Hope it helps I guess..
Answer: i think is B
Explanation: HATE ME IF IM WRONG
I will give you 100 points and mark you as brainilest if you answer the whole thing correctly.
Answer:
1.)[tex]Al_{2} O_{3}[/tex]
2.) [tex]Li_{3} N\\[/tex]
3.) 2HCl
4.) MgO
5.) Mg and [tex]O_{2}[/tex]
6.) [tex]H_{2}[/tex] and [tex]O_{2}[/tex]
7.)Na and [tex]Br_{2}[/tex]
8.) 3 aluminums and 3 chlorides
Explanation:
If a sample of air in a closed, rigid container was heated, would the partial pressure of oxygen increase, decrease or remain the same?
Answer:
increase
Explanation:
To solve this problem, you simply have to apply the Ideal Gas Law. Using this equation, we know that the pressure is directly proportional to the temperature. Thus, as something is heated (i.e. its temperature is increasing), its pressure would increase as well.
What is the percent composition by mass for sodium (Na) in sodium phosphate (Na3PO4)? % Na = (______/______)x100% = _______% NNA
The percent composition by mass for sodium (Na) in Sodium phosphate (Na₃PO₄) : 42.07%
Further explanationGiven
Compound of Sodium phosphate (Na₃PO₄)
Required
The percent composition by mass for sodium (Na)
Solution
The Comparative Law (Proust ) : compounds are formed from elements with the same Mass Comparison
MW Na₃PO₄ = 163,94 g/mol
Ar Na=22,989769g/mol
[tex]\tt \%mass~Na=\dfrac{3.Ar~Na}{MW~Na_3PO_4}\times 100\%\\\\\%mass~Na=\dfrac{3\times 22.99}{163.94}\times 100\%\\\\\%mass~Na=42.07\%~Na[/tex]
Consider the reaction: 2AB2 → A2 + 2B2 You start with one mole of AB2 and the reaction is done at constant pressure of 3.7 atm and 28.2 °C. Assume all gases behave like ideal gases. What is the value of the work (in J)?
Answer:
-2503.2J
Explanation:
At constant pressure, change in work follows the equation:
W = -P*ΔV
Where W is work, P is pressure (3.7atm) and ΔV is change in volume
We can obtain change in volume using ideal gas low:
ΔV = ΔnRT/P
Where Δn is change in moles (3moles of products - 2 moles of reactants = 1)
R is gas constant (0.082atmL/molK)
T is absolute temperature (28.2°C + 273.15 = 301.35K)
P is pressure (3.7atm)
ΔV = ΔnRT/P
ΔV = 1mol*0.082atmL/molK*301.35K/3.7atm
ΔV = 6.69L
And work is:
W = -3.7atm*6.69L
W = -24.71atmL
1atmL = 101.3J
-24.71atmL * (101.3J / 1atmL) =
-2503.2J
A sample of water with a mass of 27.56g and an unknown temperature loses 2443 Joules. If the final temperature is found to be 62.50 C. What was the initial temperature?
Answer:
41.3 °C
Explanation:
From the question given above, the following data were obtained:
Mass (M) of water = 27.56 g
Heat (Q) loss = 2443 J
Final temperature (T2) = 62.5 °C
Initial temperature (T1) =?
NOTE: The specific heat capacity (C) of water is 4.18 J/g°C
Thus, we can obtain the initial temperature of the water by using the following formula:
Q = MC(T2 – T1)
2443 = 27.56 × 4.18 (62.5 – T1)
2443 = 115.2008 (62.5 – T1)
Divide both side by 115.2008
2443 / 115.2008 = (62.5 – T1)
21.20645 = 62.5 – T1
Collect like terms
21.20645 – 62.5 = – T1
– 41.3 = – T1
Divide both side by – 1
– 41.3 /– 1= – T1 / –1
41.3 = T1
T1 = 41.3 °C
Thus, the initial temperature of the water was 41.3 °C
Examine the EM spectrum chart. Describe what is happening as the EM spectrum goes
from Radio Waves to Gamma rays,
Vight
Uno
Somme
Morowaves
Infrared
Radio Waves
Woman
w
w
Wavelength
The amplitude increases
The wavelength increases
The wavelength decreases
The amplitude decreases
Answer:
The wavelength decreases
Explanation:
As you go along the EM spectrum from radio waves to gamma rays, the wavelength decreases as the wave's energy and frequency increase.
Nitrogen gas is cooled and its volume went
from 375 mL to 255 mL. If the final
temperature is -45 °C, what was the original
temperature?
Write your thoughts or ideas about the lesson on types of soil.
Answer:
There are different types of soil in the earth. Those different types of soil helps the earth stay healthy in many ways!! Just like the different layers in the earth. There are so many different layers in the earth so that the plants get the different nutrition they need. Not only that but it cleans the water that soaks in the ground.
There are 6 different types of soil, they are; sandy soil, clay soil, silt soil, peat soil, chalk soil, and loam soil.
Explanation:
Sandy soil
Sandy Soil is light, warm, dry and tend to be acidic and low in nutrients. Sandy soils are often known as light soils due to their high proportion of sand and little clay (clay weighs more than sand). These soils have quick water drainage and are easy to work with. They are quicker to warm up in spring than clay soils but tend to dry out in summer and suffer from low nutrients that are washed away by rain. The addition of organic matter can help give plants an additional boost of nutrients by improving the nutrient and water holding capacity of the soil.
Clay Soil
Clay Soil is a heavy soil type that benefits from high nutrients. Clay soils remain wet and cold in winter and dry out in summer. These soils are made of over 25 percent clay, and because of the spaces found between clay particles, clay soils hold a high amount of water. Because these soils drain slowly and take longer to warm up in summer, combined with drying out and cracking in summer, they can often test gardeners.
Silt Soil
Silt Soil is a light and moisture retentive soil type with a high fertility rating. As silt soils compromise of medium sized particles they are well drained and hold moisture well. As the particles are fine, they can be easily compacted and are prone to washing away with rain. By adding organic matter, the silt particles can be bound into more stable clumps.
Peat Soil
Peat soil is high in organic matter and retains a large amount of moisture. This type of soil is very rarely found in a garden and often imported into a garden to provide an optimum soil base for planting.
Chalk Soil
Chalk soil can be either light or heavy but always highly alkaline due to the calcium carbonate or lime within its structure. As these soils are alkaline they will not support the growth of ericaceous plants that require acidic soils to grow. If a chalky soil shows signs of visible white lumps then they can’t be acidified and gardeners should be resigned to only choose plants that prefer an alkaline soil.
Loam Soil
Loam soil is a mixture of sand, silt and clay that are combined to avoid the negative effects of each type. These soils are fertile, easy to work with and provide good drainage. Depending on their predominant composition they can be either sandy or clay loam. As the soils are a perfect balance of soil particles, they are considered to be a gardeners best friend, but still benefit from topping up with additional organic matter.
Those are the different types of soils with all of their many uses. I hope this helps!!!!! Have a wonderful day!!!
Which reverses the flow of current through an electric motor?
A brush
B battery
C armature
D commutator
Answer:
D
Commutator is the answer
Explanation:
The commutator systematically converts the current direction between the rotor and the outer circuit. As the shaft revolves, the commutator converts the course of current in a winding. For a separate armature winding, when a cylinder has reached one-half perfect turn, the winding is now attached so that current passes through it in the reverse of the original direction.
Answer:
D. Commutator
Explanation:
I just took the quiz. credit to the person above me.
Which has a higher melting point KF or NaF?
Answer:
NaF
Explanation:
Melting point of NaF is 993°C but Melting point of KF is 858°C
Answer:
I think naf
Explanation:
QUICK
Which of these is a ball and stick model?
Please select the word from the list that best fits the definition left standing after the collapse of a sea arch
Answer:
Sea Stack
Explanation: :)
Answer:
A
Explanation:
For which each question , which box do I mark?
Answer:
A
B
A
B
B
Explanation:
B - MIXTURE
A - COMPOUND
In your own words, define the following terms.
1 Blood
2 Lymph
3 Alveoli
Answer:
BLOOD - the definition of blood is the fluid carries oxygen
Explanation:
sana po makatulong♡♡
HELP PLSSS FASTTTTTT!!!!!!!!!!!!!!!!
Answer:
with what?
Explanation:
I HAVE 5 minutes HELP!!
Which organelle accurately completes the chart?
O lysosome
O cell wall
O vacuole
O endoplasmic reticulum
Answer:
endoplasmic reticulum
Explanation:
Endoplasmic reticulum will complete the chart. The Endoplasmic reticulum is one type of organelle that is present in eukaryotic cells. They form a network that is interconnected with membrane-enclosed sacs or structures that are tube shaped and are called cisternae.
guys, how do i know whether the forces of attraction is strong or weak?
Answer:
Whether the forces of attraction is strong or weak is explained below in details.
Explanation:
There are three distinct kinds of intermolecular forces in expressions of energy. They are (strongest to weakest) dipole-dipole, hydrogen bonding, and Van der Waals' strengths. Intermolecular forces are weak related to intramolecular forces – the energies which endure a molecule collectively. For instance, the covalent bond, including distributing electron sets among atoms, is much more powerful than the forces impersonate among neighboring molecules.
If a cake recipe requires 25g of sugar, how much sugar will the baked cake contain
Write the structure of the following compound:
=> 3-(4-chlorophenyl)-2-methylpropane
Answer:
See explanation and image attached
Explanation:
The IUPAC system of nomenclature enables the structure of molecules to be written seamlessly from the name of the compound. Hence it is commonly called the systematic nomenclature.
The parent chain here is propane. It is substituted at the 2- position by a methyl group and at the 3-position by 4-chlorophenyl group as we can see in the image attached to this answer.
What object do you think will take up
more space? Why do you think this?
Answer:
solids
Explanation:
BC they r heavier than liquid and gas
5. Calculate the time required to deposit 0.37g of Silver from a silverNitrate solution using a current of 2.5A( Charge of Ag in AgNO3 is + 1)
Time required : 132.2 s
Further explanationGiven
mass of Silver = 0.37 g
current = 2.5 A
Required
time do deposit
Solution
Faraday's Law :
[tex]\tt W=\dfrac{e.i.t}{96500}[/tex]
e = ar/valence (valence Ag = 1)
i = current
t = time = s
[tex]\tt 0.37~g=\dfrac{108/1\times 2.5~A\times t }{96500}\\\\t=132.2~s[/tex]
Which statement is true about water's density and the survival of marine life? view attachment
If you put a piece of zinc into a solution of copper (I) sulfate and allow the single replacement reaction to go to completion, how will you know which of the reactants is the limiting reactant? Write the balanced equation, including the states of matter of the reactants and products, to help support your answer.
Explanation:
Reaction of zinc metal in copper sulfate solution.
[tex]\begin{array}{ll}\text { Oxidation : } & \mathrm{Zn}(s) \rightarrow \mathrm{Zn}^{2+}(a q)+2 e^{-}\\\text {Reduction : } & \mathrm{Cu}^{2+}(a q)+2 e^{-} \rightarrow \mathrm{Cu}(s) \\\hline \text { Full Reaction : } & \mathrm{Zn}(s)+\mathrm{Cu}^{2+}(a q) \rightarrow \mathrm{Zn}^{2+}(a q)+\mathrm{Cu}(s)\end{array}[/tex]
Zinc is listed above copper on the activity series, this means that zinc is more easily oxidized than copper. That is why copper(II) ions can act as an oxidizing agent when put into contact with zinc metal. Ions of any metal that is below zinc, such as lead or silver, would oxidize the zinc in a similar reaction.
En un recipiente cerrado a 25°C disponemos de un gas sometido a una presión de 250.000 Pa. Luego, sin que cambie el volumen, conseguimos una presión de 350.000 Pa. ¿a qué temperatura habremos tenido que calentar el gas?.
Answer:
El gas se calentó a 35°C
Explanation:
Para resolver este problema es necesario aplicar la Ley de Gay Lussac donde en una situación en la que un gas no modifica su volumen, su temperatura será directamente proporcional a la presión.
Podemos pensar que se describe desde la Ley de Gases Ideales donde:
P . V = n . R . T
para la situacion 1
y P . V = n . R . T para la situacion 2
Como V, n y R son constantes:
P₁ / T₁ = P₂ / T₂
250000 Pa / 25°C = 350000 Pa / T₂
T₂ = 350000 Pa . 25°C / 250000 Pa → 35°C
what about solids ? Do solids move around like liquids and gases ?
Answer:
No, gases move freely all over the place, liquids move more freely but in a more contained area, and solids the molecules are rigid, at the most the movement is small vibration as the molecules put pressure on one another to hold their form and stay in place.
Isaac Newton lived and developed his Laws of Motion during which time period?
Answer:
saac Newton was a physicist and mathematician who developed the principles of modern physics, including the laws of motion and is credited as one of the great minds of the 17th-century Scientific Revolution.
Education: The King's School, University of Ca...
Birth Date: January 4, 1643
Death Date: March 31, 1727
Explanation:
Isaac Newton was a physicist and mathematician who developed the principles of modern physics, including the laws of motion and is credited as one of the great minds of the 17th-century Scientific Revolution.
hope it helps have a great day