Answer:
I believe that it is option c.
Which of the following tools might civil engineers use when designing roads in a recently constructed industrial park?
A.)theodolite
B.)altimeter
C.)planimeter
D.)Gunter’s chain
I put planimeter but I want to make sure before I turn it in.
Answer:D. Gunter's Chain
Explanation:I know this because a gunter's chain is used for plots of land to be accurately surveyed and plotted, for legal and commercial purposes.
if I were to build a fully functional robotic leg what type of circuit board should I use?
Answer:
A good one
Explanation:
Rotatianal degrees and stuf for different types of movement would take some proccesing power and if it were linked to brain neurons you would need one not prone to frying
if this is that and that is this then this is that
Answer:
that is this so that is this
Explanation:
A machinist creates a solid steel part for a wind turbine. The part has a volume of 1015 cubic centimeters. Steel can be purchased for $0.29 per gram, and has a density of 0.795 g/cm3. If the machinist makes 500 of these parts, what is the cost of the steel, to the nearest dollar
Answer:
$234
Explanation:
[tex]cost=volume*density*cost per gram = 1015cm^{3} *0795g/cm^{3} *0.29dollars/g=234 dollars[/tex]
As per the given data, the cost of steel for 500 parts will be approximately $116891.
What is wind turbine?A wind turbine is a machine that converts wind's kinetic energy into electrical energy.
To find the cost of the steel for 500 parts, we need to first find the mass of steel required to make one part.
Density of steel = 0.795 g/cm^3
Volume of one part = 1015 cubic centimeters
Mass of one part = Density x Volume = 0.795 x 1015 = 806.425 grams
So, to make 500 parts, the total mass of steel required will be:
Total mass = 500 x 806.425 = 403212.5 grams
The cost of steel per gram is $0.29, so the total cost of the steel for 500 parts will be:
Total cost = Total mass x Cost per gram = 403212.5 x 0.29 = $116891.13
Rounding this to the nearest dollar, the cost of steel for 500 parts will be approximately $116891.
Thus, the answer is $116891.
For more details regarding wind turbine, visit:
https://brainly.com/question/928271
#SPJ2
ways to increase the efficiency of energy use
Explanation:
use
ball bearings
grease
oil
You are a historian who is compiling information on the changing materials used in a product in one of the categories listed below. Choose a product that uses a variety of materials that have been discussed in this lesson (for example, a car or a tennis racket). Using online or library resources, research past materials used to create the product. Be sure to discuss the materials currently being used for the design and include information on the sustainability of these resources. Your research must also explain why the materials changes were made (for example, safety, cost, or weight). Keep track of your references so that you can document all of the resources used for your report.
Answer:
look on line ok
Explanation:
any unblocked video sights for school ?
Answer:
I'm not sure what you mean
Explanation:
How old must you be to operate a forklift
if the mine winch drum diameter is 6 m, calculate how far the cage will drop for each single rotation of the drum
Answer:
The depth to which the cage will drop for each single rotation of the drum is approximately 18.85 m.
Explanation:
The mine winch drum consists of a drum around around which the haulage rope is attached
Therefore, given that the diameter of the winch drum = 6 m
The length of rope unwound by each rotation = How far the cage will drop for each single rotation of the drum
The length of the rope unwound by each rotation = The rope that goes round the circumference of the winch drum, once
∴ Since the rope that goes round the circumference of the winch drum, once = The circumference of the winch drum, we have;
The length of the rope unwound by each rotation = The circumference of the winch drum = π × The diameter of the winch drum
The length of the rope unwound by each rotation = π × 6 m = 6·π m
The length of rope unwound by each rotation = How far the cage will drop for each single rotation of the drum = 6·π m
How far the cage will drop for each single rotation of the drum = 6·π m ≈ 18.85 m
The depth to which the cage will drop for each single rotation of the drum ≈ 18.85 m.
give the meaning of the following words in your notebook pyrography , staining , painting
yooo. does anyone have tin foil and tape mask that they can take a picture of and send it ?
Answer:
broooo what are u trying to do ?
Explanation:
lol u didn't go to the store and get ur supplies
2. The unthreaded part of a bolt or screw is called the
Answer:
The grip
Explanation:
the head of all headed bolt (except countersunk head bolt)
Does the sum exterior measure of all regular and irregular polygons always equal to 360° ?
Answer:
One important property about a regular polygon's exterior angles is that the sum of the measures of the exterior angles of a polygon is always 360°.
Explanation:
HOPE MY ANSWER HELPED<3 HAVE A WONDERFUL DAY
What is something that a robot or computer program might do that requires a decision, or conditional statement?
Answer:
Make decisions such as greeting a user depending on the time of day. Example: saying good morning while it is morning but saying good afternoon to the user only when it is the appropriate time.
Explanation:
I have used decision making methods in various programs to greet users, and determine whether to do one thing or another based on values passed to the program
If you have any questions feel free to ask me and I will do my best to help and explain! :)
What parts does the block contain?
Answer:
Cylinder blocks.
Cylinder liners.
Coolant passages.
Oil passages.
Crankcase.
Integrated crankcase.
Integrated cylinder head.
Integrated transmission.
Explanation:
2. Identify the structural members specified in the drawings below.
A
В.
С.
Subfloor
D.
E.
F.
Answer:
where is the drawing bro
Select only three polyhedral shapes.
1. sphere
2. prism
3. column
4. cone
5. pyramid
6. cube
Answer:
CubeSphere ComeExplanation: A three -dimensional shape with flat polygonal faces , straight edges and sharp corners or verticesThis style is closest to the cuisine enjoyed by French royalty and nobility.
А
Nouvelle cuisine
B
Cuisine bourgeoise
С
Haute cuisine
D
Cuisine classique
Answer: С
. Haute cuisine
Explanation:
Haute Cuisine is typically associated with higher level establishments due to the time and cost it takes to prepare as it involves meticulous preparation and usually uses exotic ingredients which make it quite expensive.
It is therefore no wonder that it came to be in order to feed the 'privileged' people in France being the French Royals and Nobles in the 17th century. It differed from normal cooking at the time by using exotic ingredients such as tongue and caviar and as such, gave those who ate it a feeling of superiority.
Which type of hitch consists of two or more vertical hitches attached to the same hook, and allows the slings to be connected to the same load without the use of a
spreader beam?
A type of hitch that consists of two or more vertical hitches attached to the same hook is: B. Bridle hitch.
What is a hitch?A hitch can be defined as a device that comprises a knot that is typically used for connecting an object (load) to another.
In Engineering, there are different types of hitch and these include the following:
Basket hitchBridle hitchBlock-and-tackle hitchDouble-leg chain hitchIn conclusion, a bridle hitch is a type of hitch that consists of two or more vertical hitches attached to the same hook, and allows the slings to be connected to the same load without the use of a spreader beam.
Read more on hitches here: https://brainly.com/question/4119773
How do fish propel in water?
A. Water pushes back twice as hard a the fin pushing on it
B. Air bubbles under the fin
C. The water pushes back on the fins with an equal force
Answer:
C
Explanation:
Fish swim by flexing their bodies and tail back and forth. Fish stretch or expand their muscles on one side of their body, while relaxing the muscles on the other side. This motion moves them forward through the water. Fish use their back fin, called the caudal fin, to help push them through the water.
Answer: c
Explanation:
The raised areas between the grooves in a rifled bore are called:.
Answer:
The raised portions of the rifling are known as lands and the recessed portions are known as grooves. When a weapon is fired, these lands and grooves cut into the bullet, putting spin on it as it travels through the barrel of a firearm. Because bullets have an oblong shape, spin is necessary for accurate flight
plssssssssssssssssss help
Answer:
with what exactly? define " please, help "
with what love? you have no question on here and there isn't any attachments. I'd love to help but i don't know how
what do you guys like in engineering
Answer:
You create and work with others. Also you build and innovate. It a fun job but does require lots of trial and error. There is some math involved but you need mah for lots of jobs. Also, the amount of school needed its not a lot compared to the pay you can get. I think that it fun and puts your mind to work
Explanation:
Answer:
You get to change the world. ...
It's incredibly challenging and rewarding. ...
You get to solve problems and be creative. ...
No two projects are usually completely the same. ...
You will always have opportunities to learn new things. ...
Engineering careers are pretty flexible.
Explanation:
Which uses combustion to transfer thermal energy to warm a building?
O heat engine
O furnace
refrigeration unit
O heat pump
Answer:
Furnace
Explanation:
Furnace typically uses a propane or natural has heat exchanger. High efficiency units will vent with PVC (condensing flue gas), lower efficiency in metal flue pipe.
Answer:
B. Furnace
Explanation:
A. X
B. O
C. X
D. X
Which of the following famous structures has an imaginary line that connects the center of the base with the vertex? *
A. Aloba Arch
B. Rainbow Bridge National Monument
C. Great Wall of China
D. Great Pyramids of Egypt
Write two main advantages of digital communication system over analog commu-
nication system.
Answer:
Increased range.
Better voice quality.
Noise preservation and noise reduction.
Deliver more information.
Greater portability and flexibility.
Simple to use.
I hope I helped
a digital multimeter is set to read dc volts on the 4 volt scale the meter leads are connected to a 12 volt battery what will the display read
Answer: The answer
The answer is D. 0.012 V
Explanation:
0.012 V will the display read, as a digital multimeter is set to read DC volts on the 4 volt scale the meter leads are connected to a 12 volt battery.
What is digital multimeter?Voltage, current, and resistance are just a few of the electrical stimuli that a digital multimeter, or DMM, measures and verifies.
It combines the functions of a voltmeter, an ammeter, and an ohmmeter and is common diagnostic equipment used by technicians and electrical engineers.
Thus, it is 0.012 V
For more details about digital multimeter, click here:
https://brainly.com/question/5135212
#SPJ2
Which statistical process control (SPC) tool is described in these sentences?
is a statistical process control (SPC) tool that helps identify the causes of a particular problem. is a SPC tool that helps to visualize the steps in a process and identify gaps in the process.
Answer:
is a SPC tool that helps to visualize the steps in a process and identify gaps in the process.
Examine the chart below, which compares the prices of three different items to the quantities supplied at each price:
Name and define the economic concept being illustrated. Then analyze the chart’s information, and state which item is a) elastic; b) inelastic, or; c) unit elastic, and tell why.
Answer:
a) Item #1
b) Item #3
c) Item #2
Explanation:
From the given chart, we have;
Item #1 is elastic
The percentage change in price results in a larger percentage change in quantity supplied as follows;
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 25 in 150% change (increase)
Therefore, a percentage change in price results in a higher percentage change in quantity supplied, and the supply is said to be elastic ([tex]E_S > 1[/tex])
Item #2 is Unit elastic
The percentage change in price results in an equal percentage change in quantity supplied and the supply is therefore unit elastic
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 20 in 100% change (increase)
Therefore, a percentage change in price results in an equal percentage change in quantity supplied, and the supply is said to be unit elastic ([tex]E_S = 1[/tex])
Item #3 is inelastic
The percentage change in price results in an lesser percentage change in quantity supplied and the supply is therefore inelastic
The percentage change in price from $1.00 to $2.00 is 100% change (increase) while the corresponding percentage change for the quantity supplied from 10 to 15 in 50% change (increase)
Therefore, a percentage change in price results in an lesser percentage change in quantity supplied, and the supply is said to be inelastic ([tex]E_S < 1[/tex]).
I left my leveno computer on my bed and didn’t touch for a while mind you it was working but then I came back and it was closed and the screen was black even if like it would open and I think that’s because I dropped my phone on the F11 button and I didn’t know what it did and now
It still has the time screen and then you press it and it go back to like a light up black screen pls help me I have school at 9:30
Answer:
Try restarting your computer this would typically be pressing the power button for about 15 seconds. Pressing f11 shouldnt have done anything because that is typically used to make something fullscreen
Explanation: