What's the lewis structure of NO3- and O3?
I end up finding the apparently wrong ones for both, and am probably missing out on an important notion.

Answer:

C) W is the amplitude, and an increase in W is associated with an increase in energy.

E) X is wavelength, and a decrease in X is associated with an increase in energy.

Explanation:

A transverse wave consists of an oscillating electric field that is perpendicular to the direction of the wave. Increasing either the amplitude or the wavelength of the wave increases its energy. For a transverse wave, the amplitude corresponds to W, while the wavelength is labeled X. So increasing W or decreasing X will create increase the energy of the wave.

The allowed concentration of Cl in water is 250 ppm. Then the equivalent concentration in molarity is 0.007 molar.

Molarity is a common term used to express the concentration of a solution. It is the ratio of the number of moles of solute to the volume of solution in liters. Molarity is a temperature dependent measurement.

Parts per million is another term of concentration have the formula as written below:

ppm = ws/W × 10⁶

Where, ws is the weight of solute and W be the weight of solution in grams.

1 molar = 35500 ppm

therefore, 250 ppm = 250 ppm × 1M /35500 ppm  = 0.007 M.

Hence, the molarity of the salt solution will with the maximum  allowed concentration will be 0.007 M.

Find more on molarity:

https://brainly.com/question/8732513

#SPJ1

The mass of a 8.45 m3 piece of copper is 7537.4 grams.

Mass is described as a dimensionless quantity representing the amount of matter in a particle or object.

density of copper =8.92g/cm^3

volume = 8.45 x 100 cm^3

mass =  (8.45 x 100) x 8.92

mass = 7537.4 grams.

The relationship between mass, density and volume is that density offers a convenient means of obtaining the mass of a body from its volume or vice versa.

This means that the mass is equal to the volume multiplied by the density (M = Vd), while the volume is equal to the mass divided by the density (V = M/d).

Learn more about mass at: https://brainly.com/question/19385703

#SPJ1

No, not all antigens are foreign substances.

An antigen is any substance that can trigger an immune response, including the production of antibodies. Some antigens are naturally present in the body and are called "self" antigens which are usually not harmful, but in some cases, the immune system can mistakenly recognize them as foreign and attack them which can lead to autoimmune diseases.

Antigens bind together with antibodies and promote the elimination of harmful pathogens present in the body. They alert other parts of the immune system to take over which helps to neutralize the threat from pathogens.

To learn more about antigen:

brainly.com/question/15694610

Cathode: 2 Ag+ (aq) + 2 e- → 2 Ag (s). Anode: 2 H+ (aq) → H2 (g) + 2 e-.

What is cathode ?

A cathode is an electrode in an electrical circuit from which electrons flow out. It is usually made of metal and is negatively charged. Cathodes are commonly used in electronic devices such as batteries, lamps, and vacuum tubes. In a battery,

the cathode is the terminal which provides a negative charge and is usually connected to the negative terminal of the battery. In a vacuum tube, the cathode is the source of electrons which flow through the tube to the anode, which is the positive terminal.

To learn about more cathode .

https://brainly.com/question/4052514

#SPJ1

Answer:

Because there is some element which is already in an octet state and has no need to achieve it, they have a full electron in their outermost shells such as helium, argon etc.

Answer:

The answer is lithium bromide because it is the combination of a metal (lithium) and a nonmetal (bromine). The indicator that this is the correct name, rather than lithium bromate, is that the compound is composed of only two elements and does not contain oxygen. Yes, this is why NaNO3 is Sodium Nitrate; it is composed of three different elements (sodium, nitrogen, and oxygen).

Explanation:

Answer: 1s2 2s2 2p4

Explanation:

Recall the number of electrons an orbital can have:

s orbitals have 2, p orbitals have 6, d orbitals have 10, f orbitals have 14, and so on.

Oxygen in its neutral state would have 8 electrons.

To summarize the diagonal filling order, it goes from the least energy level to the most, and the orbital with the least amount of orbitals to the most.

So, the order for this will go from 1 and end at 2 (for energy level,) then s, s again (as energy level 1 has 1s orbital only,) and p.

So, the first energy level, 1s2 (2 electrons), leaves the remaining six electrons.

Completely fill the s orbital (another 2 electrons), and the remaining 4 electrons will be in the respective p orbital.

Thus, it is 1s2 2s2 2p4.

The number of moles of the ideal gas is 0.12 moles. Option A

In the context of the problem that we have here, we are looking at the ideal  gas equation. When we look at the idea gas equation, we can tell that we would have the pressure of the gas, the volume of the gas as well as the temperature of the gas in view as is the case that we have here.

Thus, the idea that we are asked to pass across in the question is that we should be able to find out the number of moles that we have in the compound that have the variables that have been listed here.

Pressure (P) =  1 atm

Volume (V) = 1 L

Temperature (T) = 1 K

Number of moles (n) = ?

Using;

PV = nRT

n = PV/RT

n = 1 * 1/0.082 * 1

n = 0.12 moles

The moles of the gas is 0.12 moles.

Learn more about ideal gas:https://brainly.com/question/28257995

#SPJ1

Answer:

So 0.39 moles of oxygen are produced in 14 g of water. So that's it.

Explanation:

The mass of hexane, C₆H₁₄ that would be needed to produce 562 grams of carbon dioxide, CO2 is 183 g

We'll begin by writing the balanced equation for the reaction.

2C₆H₁₄ + 19O₂ → 12CO₂ + 14H₂O

From the balanced equation above,

528 g CO₂ were produced from 172 g of C₆H₁₄

With the above information, we shall determine the mass of hexane, C₆H₁₄ needed to produce 562 g CO₂. Details below:

From the balanced equation above,

528 g CO₂ were produced from 172 g of C₆H₁₄

Therefore,

562 g of CO₂ will react to produce = (562 × 172) / 528 = 183 g of C₆H₁₄

Thus, the mass of hexane, C₆H₁₄ needed is 183 g

Learn more about mass:

https://brainly.com/question/25824598

#SPJ1

Answer:

Step 1: Use the kn*fe to cut the rubber tubing into two pieces.

Step 2: Use one plastic bag to filter the pond's murky water. Place the bag over the plastic cup and pour the water into it.

Step 3: Place the filtered water from the plastic bag into the 5-L glass bottle.

Step 4: Add a few drops of the liquid bleach to the water in the glass bottle.

Step 5: Place the nylon jacket over the top of the glass bottle and secure it with the rubber tubing.

Step 6: Place the glass bottle in direct sunlight and let it sit for at least an hour.

Step 7: Remove the nylon jacket and rubber tubing from the glass bottle.

Step 8: Use the second plastic bag to filter the water from the glass bottle.

Step 9: Enjoy the drinkable water!

Explanation:

Answer:   It takes 285.8 kJ of energy to form one mole of water

Explanation:

The enthalpy of formation of a substance is the change in enthalpy that occurs when a substance is formed from its elements in their standard states. The enthalpy of the formation of water is -285.8 kJ/mol, which means that it takes 285.8 kJ of energy to form one mole of water from its elements (hydrogen and oxygen) under standard conditions. This value is negative, which means that the formation of water releases energy. This is why water is often referred to as an "exothermic" substance because it releases energy when it is formed. The negative value of the enthalpy of formation for water can be explained by the fact that the bonds formed between hydrogen and oxygen atoms in water are stronger than the bonds between hydrogen and oxygen atoms in the individual elements. This means that it takes less energy to break the bonds in the elements than it releases when the bonds in water are formed, resulting in a net release of energy.

For more information about Enthalpy;

https://brainly.com/question/11317028

Answer:

This means that 285.8 kJ/mol is evolved when one mole of water is formed.

What is the enthalpy of formation?

The term enthalpy of formation has to do with the energy that is released or absorbed when a molecule of water if formed from its constituents.

The fact that the enthalpy of formation of water is -285.8 kJ/mol implies that 285.8 kJ/mol is evolved when one mole of water is formed.

Explanation:

There is no other feasible arrangement of “tetramethylbutane” it is redundant in this circumstance.

Tetramethylbutane, often known as hexamethylethane, is a hydrocarbon with the chemical formula C8H18 or (H3C-)3C-C(-CH3)3. It is the most branching and compact of the several octane isomers, as well as the only one having a butane (C4) backbone.

It has a highly symmetrical structure, a high melting point, and a narrow liquid range; in fact, it is the smallest saturated acyclic hydrocarbon that emerges as a solid at 25 °C. (Cubane, C8H8, is much smaller and solid at room temperature among cyclic hydrocarbons.) It is also the most stable C8H18 isomer, with a lower heat of formation of 4.18 kcal/mol (17.5 kJ/mol) than n-octane, which has been related to dispersive interactions (electron correlation) between the methyl groups (protobranching).

To learn more about Tetramethylbutane to refer:

https://brainly.com/question/28601156

#SPJ1

Thermal energy is the sum of all the potential and kinetic energy of the atoms within a system that is responsible for its temperature.

Friction transforms other forms of energy into thermal energy. Atoms are the building blocks of matter. Atoms are composed of subatomic particles called protons, neutrons, and electrons.Periodic trends are patterns on the periodic table that illustrate elements’ characteristics.Significant trends are atomic radius, metallic reactivity, electronegativity, electron affinity, and ionization energy.

Atomic radius and metallic reactivity trends: They increase when they move down a group and left across a period.Electronegativity, electron affinity, and Ionization energy trends: They increase when they move up a group and right across a period.

To learn more about Electro negativity to refer:

https://brainly.com/question/27885245

#SPJ1

One mole of the propane produces three moles of the carbon dioxide from mole ratio.

When we talk about the mole ratio, we mean the ratio of the species that can be found in the reaction. We can be able to get the mole ratio from the balanced reaction equation and we apply it to solve problems from the stoichiometry of the reaction.

Given the fact that we have the reaction as it has been written in the question, it is clear that we would need about one mole of the propane to produce three moles of carbon dioxide.

We can see that there are three atoms of carbon in the propane and the implication of this is that we are going to produce three atoms of carbon dioxide in the product.

Learn more about mole ratio:https://brainly.com/question/15288923

#SPJ1

The new volume of the system can be found to be 4.9 L.

We have to know that we do use the Boyle's law when we are trying to get the association that we know that does exist when we are looking at the volume and the pressure of the gas and the both can be shown to be inversely proportional.

We then have that;

Initial pressure(P1) =  765 mmHg

Initial volume (V1) = 5 L

Final pressure (P2)= 780 mmHg

Final volume (V2) = ?

Then;

P1V1 = P2V2

V2 = 765 * 5/780

V2 = 4.9 L

As such, we can see from the calculation that the new volume that we would obtain is 4.9 L

Learn more about Boyle's law:https://brainly.com/question/1437490

#SPJ1

The half-life of gold-198 is 2.77 days

To learn more about half-life of gold-198 refers to:

brainly.com/question/28174852

#SPJ1

The lower bond energy of the silicanes make them more reactive than the alkanes.

We know that the members of group four has the ability to catenate and this is a property that characterizes all the elements that we can find in the group. However the extent to which the members of the group can be able to catenate is what we use to determine the stability of the bonds.

The alkanes are composed of the bonds that exist between carbon and hydrogen and the alkanes can be able to form very long chains and this can be used to explain the fact that you can be able to find the alkanes in various kinds of applications.

However, the bond energy of the silicanes is less than that of the alkanes hence they tend to be more reactive  then the alkanes.

Learn more about alkanes:https://brainly.com/question/3648919

#SPJ1

Answer: adioisotopes, are species of chemical elements that are produced through the natural decay of atoms. Exposure to radiation generally is considered harmful to the human body, but radioisotopes are highly valuable in medicine, particularly in the diagnosis and treatment of disease.

Explanation:

Answer:

Get a controlled environment, such as a pool or even a bowl. Pour some oil in it then you can test your solutions without causing any damage.

Explanation:

Answer:

it is the British imperial and united states customary systems

Answer:

Explanation:

In water, silver nitrate (AgNO3) dissolves to generate the ions Ag+ (silver) and NO3- (nitrate). When the substance is dissolved in water, the ions are separated and become solvated, or surrounded by water molecules. Water molecules' oxygen atoms join the metal ion in a coordinate covalent bond that gives the metal ion a pair of electrons. By preventing it from interacting with other ions or molecules in the solution, this aids in stabilising the metal ion. As a result of their hydrogen bonds with the water molecules around them, the nitrate ions are likewise stabilised in solution.

Answer:

Electrons

Explanation:

"An electron is a negatively charged particle that orbits the nucleus of an atom."

"Electrons are negatively charged particles arranged in orbits around the nucleus of an atom"

To solve this we must be knowing each and every concept related to hybridisation. Therefore, the hybridisation of the given molecule can be given as below.

Only during bond formation does hybridization occur, not in an individual gaseous atom. If the bonding of a molecule is known, the geometry of the molecule may be predicted.

compound                                                              hybridisation

Carbon dioxide (0 = C = O)                                       sp

Propene (CH[tex]_3[/tex]CH = CH[tex]_2[/tex])                                            sp³, sp²,sp²

Formaldehyde (H[tex]_2[/tex]C = O)                                             sp²

Acetone [(CH[tex]_3[/tex] )[tex]_2[/tex] C = O                                                 sp³, sp²,      sp³

Ketene (H[tex]_2[/tex]C = C = O)                                                  sp²,    sp

Therefore, the hybridisation of the given molecule can be given as above.

To learn more about hybridisation, here:

https://brainly.com/question/29290058

#SPJ1

According to the claim, Balloon A, which has more blue and less orange, exhibits accurate effusion at a relative effusion rate of 1.303. (orange is 1.303 times more effused than blue).Relative rate of effusion for the orange to blue spheres = 1.531.

The process of effusion is when a gas escapes from a container through a hole that is significantly smaller in diameter than the molecules' mean free path.

Gas molecules flow through a small opening in one container and into another by effusion. Graham's law allows rates of effusion to be compared at the same temperature. Diffusion is the random molecular motion-based movement of gas molecules through one or more other types of gas.

Rate of effusion of Orange / Rate of effusion of blue

= [Mblue / Morange]^1/2

Vrms = sqrt [(3RT/M)]

Vorange / Vblue = [ Mblue / Morange]^1/2

Rate of effusion of Orange / Rate of effusion of blue

= 565/ 369

= 1.531

Thus,  Balloon A, which has more blue and less orange, exhibits accurate effusion at a relative effusion rate of 1.303.

To learn more about the effusion, follow the link;

https://brainly.com/question/26882632

#SPJ1

molecule of the variables shift in the opposite directions when there is a inverse or negative relationship. In other words, the dependent variable grows if the value of the independent variable falls.

The dependent variable in this study are often the effect and the variable are the cause in a research investigation. Additionally, one could say that there is a cause-and- effect link between the independent and the dependent variables.

A statistical method known as correlation is used to quantify and explain a link between two variables. The two factors are often just observed, not changed. Two scores from identical people must be used for the correlation

To know more about molecule  visit :

https://brainly.com/question/19556990

#SPJ1

Four magnets near an electromagnet What is the order of the magnets by strength from strongest to weakest. magnet W,magnet X,electromagnet,magnet Y,magnet Z.

What is electromagnet?

An electromagnet is a type of magnet in which the magnetic field is generated by an electric current. It usually consists of a coil of wire that is wrapped around a core of magnetic material such as iron or steel.

When an electric current passes through the wire, a magnetic field is created around the core, making it a magnet. Electromagnets are used in many different applications, such as motors, generators, and speakers.

To learn about more electromagnet.

brainly.com/question/12555869

#SPJ1

"Certainly no muscular fatigue to sustain, while it procures for him good, unfailing wages, besides a healthy workshop gratis."

To know more about healthy workshop conditions quote, check out :

brainly.com/question/10588742

#SPJ1