Answer:
1.239 * 10^8 Kg
Explanation:
Since all the electricity consumed comes from natural gas;
amount of electricity consumed = 700 * 300,000 = 2.1 * 10^8 kWh
So, amount of CO2 consumed is given by;
amount of electricity consumed * amount of CO2 per kWh
Hence,
Amount of CO2 = 2.1 * 10^8 kWh * 0.59 = 1.239 * 10^8 Kg
Calculate the speed of a marble that rolls 9 cm in 4 seconds
Answer:
2.25
Explanation:
9/4
Name the process that happens when a liquid turns into a gas.
The gleaming metallic appearance of the Gateway Arch in St. Louis, Missouri, comes from the stainless steel used in its construction. This steel is made mostly of iron, but it also contains 19% (by mass) chromium and 9.0% (by mass) nickel. Stainless steel maintains its metallic sheen because the chromium and nickel in it combine with oxygen from the atmosphere, forming a layer of Cr2O3 and NiO that is too thin to detract from the luster of the steel but that protects the metal beneath from further corrosion. What is the mole ratio of chromium to nickel atoms in this steel?
Answer:
the mole ratio of chromium to nickel atoms in the steel is 2.383
Explanation:
Given the data in the question;
Chromium = 19% ( by mass )
Nickel = 9% ( by mass )
now, let the mass of the steel = 100 g
so mass of Chromium = 19g
mass of nickel = 9g
We know that; Atomic mass of Cr is 52 g/mol, Atomic mass of Ni is 58.7 g/mol
Moles of Cr = mass/atomic number = 19/52 mol
Moles of Ni = mass/atomic number = 9/58.7 mol
The mole ratio of of Cr to Ni atom will be;
⇒ Moles of Cr / Moles of Ni
= (19/52) / (9/58.7)
= 19×58.7 / 9×52
= 2.383
Therefore, the mole ratio of chromium to nickel atoms in the steel is 2.383
hi, if your looking for extra points (50+) and brainiest here is ur chance, answer this question correctly plz
Answer:
Answer choice 'C'
Explanation:
As the ball slows after kicking generates maximum Kinetic Energy, the ball slows due to its Kinetic Energy being transferred to surroundings because of atmospheric and surface friction until it stops in a state of static equilibrium.
What information in the passage helps answer the question asked previously?
Gravity smooths out even the lumpiest black hole.
A symmetrical collapse forms a smooth hole.
Erratic gravity pulls a black hole in different directions.
A collapse can be symmetrical or lopsided.
Please Hurrry
Answer:
D. A collapse can be symmetrical or lopsided.
Explanation:
I hope this helps
-Have a wonderful day
-Tell me if it is wrong :)
-ED Language Arts
-Questioning in A Black Hole Is NOT a Hole
-Assignment
Thank you
A collapse can be symmetrical or lopsided. Therefore, the correct option is option D among all the given options.
What is black hole?The event horizon of a black hole is an area of spacetime wherein gravity is so intense that nothing, not even light or even other electromagnetic waves, have the energy to cross it. According to general relativity theory, a compact enough mass can bend spacetime into a black hole.
The event horizon is the line beyond which there is no escape. Despite having a significant impact on the outcome and conditions of an object traversing it, general relativity states that it lacks any locally observable characteristics. A black hole behaves in many ways like a perfect black body since it does not reflect light. A collapse can be symmetrical or lopsided. This helps answer the question asked previously.
Therefore, the correct option is option D.
To know more about black hole, here:
https://brainly.com/question/16470114
#SPJ3
Your question is incomplete but most probably your full question was,
If the star was spinning before the collapse, then the black hole will spin, too. If the collapse is perfectly symmetric, a smooth black hole forms. On the other hand, even a slightly lopsided collapse leads to a lumpy black hole, with erratic gravitational effects. The gravity might be strong in some places and weak in others, and pull in different directions. However, a lumpy hole won't stay lumpy for long, because its own gravity will work to smooth it out. —A Black Hole Is NOT a Hole, Carolyn Cinami DeCristofano What information in the passage helps answer the question asked previously? Gravity smooths out even the lumpiest black hole. A symmetrical collapse forms a smooth hole. Erratic gravity pulls a black hole in different directions. A collapse can be symmetrical or lopsided.
When a liquid is insoluble in another liquid, the liquids are said to be?
Answer:
immiscible
Explanation:
Limiting Reactant
12.0 grams of sodium reacts with 5.00 grams of chlorine. What mass of sodium
chloride could be produced?
Nas) +
Cl2(g) →
NaCls)
(1)
(2)
Identify the limiting reactant.
Determine the amount of sodium chloride produced.
Answer:
(1) Cl₂ is the limiting reactant.
(2) 8.18 g
Explanation:
2Na(s) + Cl₂(g) → 2NaCl(s)First we convert the given masses of reactants into moles, using their respective molar masses:
Na ⇒ 12.0 g ÷ 23 g/mol = 0.522 mol NaCl₂ ⇒ 5.00 g ÷ 70.9 g/mol = 0.070 mol Cl₂0.070 moles of Cl₂ would react completely with (2 * 0.070) 0.14 moles of Na. There are more Na moles than that, so Na is the reactant in excess while Cl₂ is the limiting reactant.
Then we calculate how many moles of NaCl are formed, using the limiting reactant:
0.070 mol Cl₂ * [tex]\frac{2molNaCl}{1molCl_2}[/tex] = 0.14 mol NaClFinally we convert NaCl moles into grams:
0.14 mol NaCl * 58.44 g/mol = 8.18 gCarbohydrates are formed by plants converting water a d carbon dioxide into glucose and oxygen, in the photocatalyzed process is called?
The iodide (I2) content of a commercial mineral water was measured by two methods that produced wildly different results.6 Method A found 0.23 milligrams of I2 per liter (mg/L) and method B found 0.009 mg/L. When Mn21 was added to the water, the I2 content found by method A increased each time that more Mn21 was added, but results from method B were unchanged. Which of the Terms to Understand describes what is occurring in these measure- ments? Which result is more reliable?
Answer:
Results from method B is more reliable than method A.
Explanation:
The two method that are used for the analysis produced different results. The first method that is method A gives higher value of the iodine content than the method B.
When [tex]$Mn^{2+}$[/tex] was added to water, method A showed an increased in the iodine content and it increases with the increase in the amount of [tex]$Mn^{2+}$[/tex] .
Where as in the method B, there is no change in the results. Therefore the measurements provided by the method A shows an inference of [tex]$Mn^{2+}$[/tex] ion.
The measurement of the iodine content is affected by the presence of the ion [tex]$Mn^{2+}$[/tex] in water.
Since in method B there is no change in measurement, it is independent of the presence [tex]$Mn^{2+}$[/tex] ion in water.
As higher iodine content is given by method A, so [tex]$Mn^{2+}$[/tex] ion must be present in original water that must be interfering the measurement. Hence, method B is more reliable.
Method B is more reliable as its value is not altered by external factors such as contamination.
What is water analysis?Water analysis is done to test the quality of water.
The method employed in water analysis is titrimetric analysis.
In the test iodide (I⁻) content of a commercial mineral water using the two methods, the results of the test showed different values for the iodide content.
However, since addition of Mn²⁺ to the mineral water increases the iodide content value from Method A while that of Method B remains unchanged, Method B is more reliable as its value is not altered by external factors such as contamination.
Learn more about titrimetric analysis at: https://brainly.com/question/8463543
pond water with microscopic organisms inside mixture or pure substance
Answer:
it's mixture
Explanation:
since pond is composed of not only microbes and also more aqatic animals so I think pond become mixture but not pure substance am I right or not...
Which of the following explains why a longer bond is also a weaker bond? Help plz
Answer:
Longer bonds have lower attractive force
A compound contains 0.5 mol Na, 0.5 mol N, and 10 mol H. The empirical formula of the
compound is -
Answer:
NaNH₂₀
Explanation:
0.5 mol Na, 0.5 mol N, and 10 mol H
To obtain the empirical formulae, we find the mole ratio between the elements and this is done by dividing all through by the smallest mol (0.5)
Na = 0.5 / 0.5 = 1
N = 0.5 / 0.5 = 1
H = 10 / 0.5 = 20
The mole ratio is used to write the empirical formulae. It is given as;
NaNH₂₀
From where do the placenta and umbilical cord develop?
outer cells of the blastocyst
inner cells of the blastocyst
directly from the uterus
directly from the ovary
Answer:
When an egg is fertilized, it divides into two components — one becomes the embryo, which develops into the fetus, and the other becomes the placenta, which grows along the lining of the uterus. The umbilical cord develops from embryonic tissue and will grow about 60 centimetres long.
The umbilical cord develops from and contains remnants of the yolk sac and allantois. It forms by the fifth week of development, replacing the yolk sac as the source of nutrients for the embryo.
OR put simply
A, the oyster cells of the blastocyst.
The human body can get energy by metabolizing proteins, carbohydrates or fatty acids, depending on the circumstances. Roughly speaking, the energy it gets comes mostly from allowing all the carbon atoms in the food molecules to become oxidized to carbon dioxide CO2 by reaction with oxygen from the atmosphere. Hence the energy content of food is roughly proportional to the carbon content.
Let's consider alanine, C3H7NO2, one of the amino acids from which proteins are made, and glucose C6H12O6, one of the simplest carbohydrates. Using the idea above about energy content, calculate the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose.
Answer:
the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose is 1.0111
Explanation:
Given the data in the question;
To determine the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose, first we get the molar masses of both alanine and glucose
we know that;
Molar mass of alanine ( C₃H₇NO₂ ) = 89.09 g/mol
Molar mass of glucose ( C₆H₁₂O₆ ) = 180.16 g/mol
now, { metabolizing each gram }
moles of alanine = mass taken / molar mass
= 1g / 89.09 g/mol = 1/89.09 moles
moles of glucose = mass taken / molar mass
= 1g / 180.16 g/mol = 1/180.16 moles
In each molecule of alanine, we have 3 atoms of carbon.
Also, in each molecules of glucose, we have 6 atoms of carbon
so,
number of moles of Carbons in alanine = 3 × 1/89.09 moles = 0.03367
number of moles of Carbons in glucose = 6 × 1/180.16 moles = 0.0333
so ratio of energy will be the ratio of carbon atoms, which is;
⇒ 0.03367 / 0.0333 = 1.0111
Therefore, the ratio of the energy the body gets metabolizing each gram of alanine to the energy the body gets metabolizing each gram of glucose is 1.0111
1.00 x 10^6 atoms of gold is equivalent to how many grams?
Answer:
3.27 x 10⁻¹⁶ grams
Explanation:
moles Au = 1.00 x 10⁻⁶ Atoms / 6.02 x 10²³Atoms / mole = 1.66 x 10⁻¹⁸ mole Au
grams Au = 1.66 x 10⁻¹⁸ mole Au x 196.97 grams Au/mole Au
= 3.27 x 10⁻¹⁶ grams Au
Which level is made up of organisms that break down dead organisms?
Answer:
Explanation:
decomposers
how many moles of nitrogen gas are produced in the reaction if we started with 6 moles of ammonium nitrate
(a)A student took a solution of copper sulphate in a beaker and put a clean iron nail into it and left it for about an hour.
(i) What type of colour change do you observe?
(ii) Identify the type of reaction.
(iii) Write a word equation for the above change.
Answer: (i) blue colour fades away
(ii) Single replacement
(iii) copper sulphate + iron [tex]\rightarrow[/tex] iron sulphate + copper
Explanation:
Single replacement reaction is a chemical reaction in which more reactive element displaces the less reactive element from its salt solution.
[tex]CuSO_4+Fe\rightarrow FeSO_4+Cu[/tex]
Here iron being more reactive than copper can easily displace copper from its salt solution and form iron sulphate and copper in elemental form.
The blue colour of the copper sulphate solution fades away.
The word equation is :
copper sulphate + iron [tex]\rightarrow[/tex] iron sulphate + copper
Sulfur dioxide and oxygen react to form sulfur trioxide during one of the key steps in sulfuric acid synthesis. An industrial chemist studying this reaction fills a flask with of sulfur dioxide gas and of oxygen gas, and when the mixture has come to equilibrium measures the partial pressure of sulfur trioxide gas to be . Calculate the pressure equilibrium constant for the reaction of sulfur dioxide and oxygen at the final temperature of the mixture. Round your answer to significant digits.
Answer:
The answer is "[tex]\bold{4.97 \times 10^{-2}}[/tex]"
Explanation:
Please find the complete question in the attached file.
Equation:
[tex]2SO_2+O_2 \leftrightharpoons 2SO_3[/tex]
at [tex]t=0 3.3 \ \ \ \ \ \ \ \ \ \ 0.79[/tex]
at equilibrium [tex]3.3-p \ \ \ \ \ \ \ \ \ \ 0.79 - \frac{P}{2} \ \ \ \ \ \ \ \ \ \ \ \ P[/tex]
[tex]p= 0.47 \ \ atm\\\\SO_2=3.3-0.47 = 2.83 \ \ atm\\\\O_2= 0.74 -\frac{0.47}{2}=0.74-0.235=0.555 \ atm\\\\K_P=\frac{[PSO_3]^2}{[PSO_2]^2[PO_2]}\\\\[/tex]
[tex]=\frac{0.47^2}{2.83^2\times 0.555}\\\\=4.97 \times 10^{-2}[/tex]
2. I need to find the angle of corner of a room, what tool could I use?
a. Combination square
b. Plumb-bob
c. Sliding t-bevel
d. Tri-square
What is the gravitational force on a 35.0kg object standing on the earth's surface ?
Answer:
Explanation:
F=mg
F=35*9.81
F=343.35N
At what minimum temperature do rocks melt into lava?
A) 3,500 degrees Celsius
B) 6,332 degrees Fahrenheit
C) 800 degrees Fahrenheit
OD 800 degrees Celsius
Lithium and nitrogen react to produce lithium nitride:
6Li (s) + N2 (g) = 2Li3N (s)
How many moles of lithium nitride are produced when 0.400 mol lithium are used in this reaction?
a. 1.28 mol
b. 0.133 mol
c. 0.800 mol
d. 0.0667 mol
Answer:
B : 0.133 M
Explanation:
moles Li3N3 = 0.4 mol Li x (2 moles Li3N/6 moles Li) = 0.133 M
While performing a blatant flop togain a foul called on the opposing team, LeBron James scrapes his knee and begins to bleed. His personal doctor bursts ontothe court with hydrogen peroxide (H2O2) in to clean up his wound. If the doctor applied 6.43 x 1029 molecules of hydrogen peroxide to the infected area, how many grams of hydrogen peroxide (H2O2) were used?
A)3.14 g H2O2B)1.317 x 1055g H2O2C)3.63 x 107 g H2O2D)1.138 x 1052g H2O
Answer:
i hope u find what your looking for
What atom has the largest atomic radius barium calcium magnesium radium
Answer:
Radium
Explanation:
It has the highest atomic number so it would have more shells, making it larger than the others.
Lets be honest here no one would help me with these 3-4 questions but anyways
Answer:
Continental drift was a theory that explained how continents shift position on Earth's surface. Set forth in 1912 by Alfred Wegener, a geophysicist and meteorologist, continental drift also explained why look-alike animal and plant fossils, and similar rock formations, are found on different continents.
Explanation:
nun
Answer:
Continental drift or tectonic plates is a theory that explains the formation of the current surface structure of the Earth.
Continental drift is also understandable if you take pictures of each continents map and try to join them with another, for example, try to fit the map of western south India with Oman's southern region you will see they exactly fit each other, Science explains this as that the land had split and drifted to form what we see now, and this is known as continental drift or tectonic plates. This form was brought up by Alfred Wegener in 1912.
This theory is also the reasoning for the rising of mountains like the Himalayan mountains, which are having a rise in their height over time, the Himalayan mountains are believed to be belonging to a boundary of two plates that move towards each other and this is believed as the rise of India.
What are the dependent and independent variables? (Picture^^)
Answer:
X axis shows the independent and Y axis shows the dependent.
Explanation:
As the independent variable is always plotted on the X-axis of the graph the Y-axis shows the dependent variable that is affected by the X variables Time is an independent variable and is always shown along the X-axis. Such as the image showed tells about the data of N2O biofuel emissions from 2009-10. Thus this will be plotted along the X-axis and Y-axis will show the amount of nitrogen fertilizer applied.Rocks are classified as sedimentary, metamorphic, or igneous on the basis of
the
a. age of the rocks.
b. way the rocks were formed.
c. types of fossils the rocks contain.
d. number of minerals found in the rocks.
What is the correct shape and polarity of a water molecule
Answer:
D
Explanation:
because both H's should be positive and O is supposed to be negative.
What is thrust force