Answer:
In a two particle system, the center of mass lies on the center of the line joining the two particles.
help me, please
Amino Acid Sequence: Create the amino acid sequence from protein synthesis using 3 letter abbreviation for amino acids (#5).
Gasoline is an example of an accelerant. True False
Answer:
true
Explanation:
Answer:
I believe its true
Explanation:
Gasoline is the most common fire accelerant used but it could also be present at a scene as an ignitable liquid due to gasoline being a common fuel. Although ignitable liquids are the most common fire accelerants it is possible to have other chemicals being used as a fire accelerant.
Gradually increasing resistance, increasing repetition, increasing sets are examples of which principle?
Answer:
Resistance training.
Explanation:
Resistance training is based on the principle of gradually increasing resistance, increasing repetition and increasing sets to acquire resistance. Resistance training refers to those physical exercises which are designed and done to improve strength and endurance of the body. Resistance training uses the principle of repetition of a particular exercise in order to attain strength as well as resistance against diseases.
Why do these two magnets attract each other?
A. The poles that face each other are opposite magnetic poles.
B. The poles of one magnet cause the other magnet to have a
magnetic field.
C. The magnetic fields leave the magnets and concentrate between
them.
D. The magnetic field is weaker between the two magnets.
Answer:
A
Explanation:
When two magnets are brought near each other, like poles repel; opposite poles attract. We like to represent this force effect of a magnet on iron-like objects with a concept called magnetic field. The concept of field can be best understood if we remember the gravitational force of Earth on object near it.
Every magnet has two poles. The same pole repels while opposite poles attract each other. Option (A) is correct. The poles that face each other are opposite magnetic poles.
What is a magnet?A magnet is a substance or item that generates a magnetic field. This magnetic field is invisible, but it is responsible for a magnet's most remarkable property.
A force that attracts or repels other ferromagnetic elements such as iron. Every magnet has two poles. The same pole repels while opposite poles attract each other.
Due to polarity Option (A) is correct. Hence the poles that face each other are opposite magnetic poles.
To learn more about the magnets refer to the link;
https://brainly.com/question/19542022
how many teeth shows signs of decay?
Answer:
what do you mean
Explanation:
What is the height of a horizontal projectile if it takes 3 seconds to hit the ground?
a
29.4 m
b
3.0 m
C
44.1 m
d
88.3 m
Answer:
B
Explanation:
I’ll mark u as brainlist if you get this right!
A plastic ball is tied to 1 end of a long string and is swung in a horizontal circle. If it takes to complete 1 circle, what is the acceleration of the ball
Explanation:
Assuming the ball is swung with a constant velocity V and radius of circle R. Therefore, The tangential acceleration of the ball would be zero.
Considering the centripetal acceleration to be a_c . we get,
[tex]a_c= \frac{V^2}{R}[/tex]
NEED AWNSER NOW! WILL MARK BRAINLY! Which term is defined as the ratio of the speed of light in a vacuum to the speed of light in the material it is passing through?
index of reflection
index of refraction
angle of reflection
angle of incidence
Answer:
Index of refraction.
Answer:
index of refraction
Explanation:
I just took the k12 quiz.
Which best defines gravity?
A. The tendency of objects to fall from trees
B. An attractive force between two objects due to their mass
C. The amount of matter in an object
D. The rate at which objects fall to earth
Answer:
B. An attractive force between two objects due to their mass
Explanation:
Answer:
B
Explanation:
Gravity is a force that pulls 2 objects towards each other and varies depending on mass. The earth for example is large enough to have a gravitational force that keeps us down. The sun has a gravitational force that keeps the Earth in orbit.
What movement allows us to move our side to side?
Answer:
Ball-and-socket joints
Explanation:
a ball bounce on the ground. at what position (A,B,C)does the ball have the greatest potential energy? kinetic energy? explain your answer.
Answer:
What is the meaning of the kinetic I think the answer is both the ball has both Kinetic and potential energy so I think is the answer is true
what are the harmful effects of drugs in the body?
Explanation:
causes hallucinations
causes lung cancer eg cigarettes
causes bad breath
damages the nervous system eg cocaine
Explanation:
Drug use can lead to an addiction. Effects of
drugs on the body can slowly destroy vital
systems and functions. Drug dependence can quickly begin to affect your psychological and physical health, and can also affect your work and social life.
hope it helps!
what is one standard kilogramun si system
Answer:
The kilogram (kg) is defined by taking the fixed numerical value of the Planck constant h to be 6.62607015 ×10−34 when expressed in the unit J s, which is equal to kg m2 s−1, where the meter and the second are defined in terms of c and ∆νCs.
Question 8 of 15
Which of the following distinguishes electromagnetic waves from mechanical
waves?
A. They carry energy.
B. They have frequencies.
C. They have wavelengths.
D. They don't require a medium to travel through.
Answer:
D. They don't require a medium to travel through.
Explanation:
Electromagnetic waves and mechanical waves are both types of waves. Electromagnetic waves are waves that arise from the combination of electric and magnetic fields while mechanical waves are waves that arise as a result of transfer of energy via matter.
One major difference between these two types of waves is that electromagnetic waves such as light waves, radiowaves etc. do not need a medium to travel i.e. they can travel through a vacuum, while on the other hand, mechanical waves such as sound waves need a medium to travel.
Answer:
They don't require a medium to travel through
Explanation: hope this helps
Hiaaa I need help pwease" concerning the planetary orbits why was Copernicus somewhat inaccurate?"
What equation would you use to solve for voltage?
Answer:
It depends upon what you have given in the question but according to Ohm's law,
[tex]\boxed{V\:= I × R}[/tex]
where, V = voltage (v)
I = current (amperes)
R = resistance (Ω)
Other formulas are:
V = P/IV = √P × RHope it helps!<3
A 2.3 kg mass oscillates back and forth from the end of a spring of spring constant 120 N/m. Depending on that x max =0.7 calculate the total energy
Answer:
42.69J
Explanation:
The question is not complete, here the complete one
A 2.3 kg mass oscillates back and forth from the end of a spring of spring constant 120 N/m. Depending on that x max =0.7 calculate the total energy
and it velocity vx= -3.4m/s
Step one:
given
mass m= 2.3kg
spring constant k= 120 N/m
x= 0.7m
vx=-3.4m/s
Step two:
The expression for the total energy is
[tex]Energy= 1/2mv^2 + 1/2Kx^2[/tex]
substituting we have
[tex]Energy= 1/2*2.3*3.4^2+1/2*120*0.7^2[/tex]
[tex]Energy= 13.29+29.4\\\\Energy=42.69J[/tex]
2. If the initial speed of the baseball in question 1 is v. = 0.0 m/s, what will its speed be when it leaves the pitcher's
hand?
Answer:
Object A has 3 times the mass of object B.
Explanation:
Have a nice rest of your day :)
Question
3.2
Calculate the value of critical angle for light passing from glass to air (given that refractive index of
glass - 1.5)
Answer:
42°
Explanation:
From the question given above, the following data were obtained:
Refractive index (n) = 1.5
Critical angle (C) =?
The refractive index and the critical angle are related according to the following reaction:
n = 1 / Sine C
Thus, with the above formula, we can obtain the critical angle as follow:
Refractive index (n) = 1.5
Critical angle (C) =?
n = 1 / Sine C
1.5 = 1 / Sine C
Cross multiply
1.5 × Sine C = 1
Divide both side by 1.5
Sine C = 1 / 1.5
Sine C = 0.6667
Take the inverse of sine
C = Sine¯¹ (0.6667)
C = 41.8 ≈ 42°
Thus, the critical angle is approximately
42°.
Does an object with constant speed also have constant velocity?. Single choice.
Answer: No, constant speed does not mean constant velocity.
A classic often used example would be to consider a car driving in circles. If the speedometer reads say 20 mph the entire time, then the speed of the car is held constant (ie the same). But the velocity is changing because velocity measures direction along with speed. The car is changing direction as it moves in a circle.
Describe what happens to the moving boat when the oars are out of the water and the forward thrust is zero
Answer:
The boat won't be able to move if the oars were out and there was no thruster. If there was a flow of the water then yes there would be a moving boat.
A man speeding at 40m/s decides to outrun the cops and starts to accelerate at a rate of 2.5m/s² for 12 seconds. How far did he travel in this time?
Answer:
The distance traveled by the man during the acceleration is 1186.32 meters
Explanation:
The initial velocity of the man = 40 m/s
The added acceleration rate of the man to outrun = 2.5 m/s²
The time of acceleration = 12 seconds
The relevant kinematic equation of motion is given as follows;
s = u·t + 1/2·a·t²
Where;
u = The initial velocity of the car the man is driving = 40 m/s
t = The time of travel during acceleration of the car the man is driving = 12 seconds
a = The acceleration by the man to outrun the cops = 2.5 m/s²
s = The distance traveled by the man during the acceleration
Substituting, gives;
s = 40 × 12 + 1/2 × 9.81 × 12² = 1186.32
The distance traveled by the man during the acceleration = s = 1186.32 m.
for an object in free fall, calculate the rate of change of the velocity from the first to the 100th second (metric units).
Answer:
The rate of change of velocity is 9.81 m/[tex]s^2[/tex].
Explanation:
By using the equation of motion, the velocity of any object in free fall at any instant, [tex]v=u+gt[/tex]
Where u (constant) is the initial velocity,
[tex]g=9.81 m/s^2[/tex] is the acceleration due to gravity,
v= velocity at time t.
To get the rate of change of velocity, differentiating the velocity, v, with respect to time, as
[tex]\frac {dv}{dt}=\frac{d}{dt}(u+gt) \\\\=\frac{d}{dt}u +\frac{d}{dt}(gt) \\\\=0+g\\\\=g[/tex]
[tex]\Rightarrow \frac{dv}{dt}=9.81 m/s^2[/tex]
Hence, the rate of change of velocity is 9.81 m/[tex]s^2[/tex].
1 Statues can be sculpted from
Answer:
Other materials from which statues can be sculpted include: contemporary media such as scrap metal, plastic, aluminium, concrete or "found" items, although this latter form of junk art is usually limited to abstract rather than representational works.
1) If a projectile launched at a speed of 20m/s above the horizontal axis of an angle 53 ;(usin g=10mls sin 53=0.8 cos 53=0.6)
find
a the displacement at 2sec
b) the velocity of 2sec
c) total time
d) maximum time
e) Range
f) maximum height
Answer:
(a) 26.83 m
(b) 12.65 m/s
(c) 3.2 seconds
(d) 3.2 seconds
(e) 38.4 m
(f) 12.8 m
Explanation:
Given that a projectile launched at a speed of 20m/s above the horizontal axis at an angle of 53 degrees.
The vertical component of the velocity in the upward direction,
u= 20 sin 53= 20 x 0.8 = 16 m/s.
The horizontal component of the initial velocity,
s=20 cos53 = 20x0.6=12 m/s.
As the gravitational force acts in the vertical direction, so it will only change the vertical component of the initial velocity while the horizontal component of the initial velocity remains unchanged.
(a) The displacement at 2 seconds:
The horizontal distance covered in 2 seconds = 12x2= 24 m
By using the equation of motion, s= ut +1/2 at²
Here, a= -10 m/s² (as g=10m/s² acts in the downward direction)
the vertical displacement s= 16x2- 1/2 x 10 x 2²=12 m
Hence, the displacement after 2 seconds = [tex]\sqrt{24^2+12^2}[/tex]=26.83 m
(b) The velocity at 2 seconds:
As the horizontal component of the velocity is not changing, so the horizontal component of the velocity = 12 m/s
By using the equation of motion, v=u+at
The vertical component of the velocity, v= 16 - 10x2=-4m/s
The negative sign shows that the vertical component of the velocity is in the downward direction.
So, the the velocity at 2 seconds = 12 i - 4 j m/s
The magnitude of the velocity = [tex]\sqrt{12^2+(-40^2}[/tex]=12.65 m/s
(c) Total time of flight:
Total time of flight = 2 x (time to reach the maximum height)
At maximum height, the vertical component of the velocity = 0
So, by using the equation of motion, v=u+at
0= 16-10 t
t= 16/10=1.6 seconds
Hence, the total time of flight= 2 x 1.6 = 3.2 seconds.
(d) Maximum time:
This is the same as the total time of flight, so the maximum time = 3.2 seconds.
(e) Range:
Range = Horizontal component of the velocity x total time of flight
= 12 x 3.2 = 38.4 m
(f) Maximum height:
As the time to reach the highest point = 1.6 seconds
So, by using the equation of motion s = ut + 1/2 at²
The maximum height, s = 16 x 1.6 + 1/2 (-10)1.6² =12.8 m
Hence, the maximum height is 12.8 m.
A 15 kg box is sliding down an incline of 35 degrees. The incline has a coefficient of friction of 0.25. If the box starts at rest, how fast is it moving after it travels 3 meters?
The box has 3 forces acting on it:
• its own weight (magnitude w, pointing downward)
• the normal force of the incline on the box (mag. n, pointing upward perpendicular to the incline)
• friction (mag. f, opposing the box's slide down the incline and parallel to the incline)
Decompose each force into components acting parallel or perpendicular to the incline. (Consult the attached free body diagram.) The normal and friction forces are ready to be used, so that just leaves the weight. If we take the direction in which the box is sliding to be the positive parallel direction, then by Newton's second law, we have
• net parallel force:
∑ F = -f + w sin(35°) = m a
• net perpendicular force:
∑ F = n - w cos(35°) = 0
Solve the net perpendicular force equation for the normal force:
n = w cos(35°)
n = (15 kg) (9.8 m/s²) cos(35°)
n ≈ 120 N
Solve for the mag. of friction:
f = µ n
f = 0.25 (120 N)
f ≈ 30 N
Solve the net parallel force equation for the acceleration:
-30 N + (15 kg) (9.8 m/s²) sin(35°) = (15 kg) a
a ≈ (54.3157 N) / (15 kg)
a ≈ 3.6 m/s²
Now solve for the block's speed v given that it starts at rest, with v₀ = 0, and slides down the incline a distance of ∆x = 3 m:
v² - v₀² = 2 a ∆x
v² = 2 (3.6 m/s²) (3 m)
v = √(21.7263 m²/s²)
v ≈ 4.7 m/s
the speed of water at the tap of lower storey is more than that in the upper storey
Answer:
Pressure of liquid in container is given by, P= height × density × acceleration of gravity.
At the lower storey, the height of the liquid from the open end is great, since height is directly proportional to pressure, the pressure exerted by liquid is maximum hence increase in velocity of flow.
Unlike the upper storey where the height of water is less hence the pressure exerted by the liquid is minimum which decreases the velocity / speed of liquid flow
The speed of water in the upper story will be lower than the lower storey because the kinetic energy of water in the upper storey will be less than that in lower storey.
What is kinetic energy?Kinetic energy of an object is generated by virtue of the motion of the object. Whereas potential energy of the object is formed by virtue of the position of the object.
Kinetic energy depends on the mass of velocity of the object by the equation:
KE = 1/2 Mv²
Potential energy of a body p = Mgh
where, m is mass, g is acceleration due to gravity and h be the height of the object from the surface.
Water at the tap of upper storey is at more height from the surface and thus, having greater potential energy than that in lower storey. Hence, the flow of water will be reduced since it possess more potential energy than kinetic energy.
To find more on potential energy, refer here;
https://brainly.com/question/24284560
#SPJ2
Which of the technologies could mostly like be found in a wearhouse
what is the function of brushes in D.C motor
Answer:
to transfer the voltage
Explanation:
The brushes make physical contact with the commutator. When a DC voltage is applied to the brushes, that voltage is transferred into the commutator which, in turn, powers the windings. This electrical input generates a magnetic field around the armature.