Which is true of high resistance wires?

A. The longer the wire the higher the resistance.
B. The shorter the wire the higher the resistance.
C. The longer the wire the lower the resistance.

Remember, there's 2 types of accelaration formula.

1st formula :

a = ( final speed - initial speed ) ÷ time

2nd formula :

resultant force (f) = mass × a

or

a = resultant force (f) ÷ mass

So the ans shld be,

a = 50 x 150

= 7500 m/s²

The acceleration of the body is 0.33 m/s².

Acceleration of an object having mass is defined as the net force acting on the object per unit mass.

Here,

Mass of the body, m = 150 kg

Force acting on the body, F = 50 N

The net force acting on an object is defined as the product of mass and acceleration of the object.

The expression for the net force acting on the body is given by,

F = ma

Therefore, the acceleration of the body,

a = F/m

Applying the values of F and m,

a = 50/150

a = 0.33 m/s²

Hence,

The acceleration of the body is 0.33 m/s².

To learn more about acceleration, click:

https://brainly.com/question/1046166

#SPJ2

The three options are 1,3 and 5 Moving the balls closer together. The distance decreases and forces increase.

The gravitational force ia s type of force has the ability attracts any two objects with mass. Gravitational force tries to pull two masses towards each other.

The value of the gravitational force is given by;

[tex]F_g=\frac{ Gm_ 1m_2}{r^2}[/tex]

It is observed that the gravitational force is directly propotional to the product of mass and inversly propotional to the square of the distance between them.

So, the correct options are :

(1) Moving the balls closer together. The distance decreases and forces increase.

(3) Wrapping the soccer ball in layers of duct tape will also increase force because the mass will increase.

(5) Similarly, putting the baseball in a plastic case will increase mass, and hence force increases.

Hence the three options are 1,3 and 5.

To learn more about the gravitational force refer to the link;

https://brainly.com/question/24783651

Answer:

Explanation:

Rubbing objects together generates static charges. There will be two type of charges: positive and negative. So the answer is (a) 2.

Answer:

2

Explanation:

When you rub two objects one gets positively charged and other gets negatively charged

So

there are two charges

Answer:

Width of a book

Explanation:

A river is much wider than a meter (3’3”)

Width of a book will be a few inches to no more than a couple feet.

The distance between cities is hundreds and hundreds of meters.

A microscope is less than a couple inches.

Answer: 2.8 m/s

Explanation:

Because momentum is conserved, the momentum obtained by the bag matches the momentum lost by the bullet.

The momentum gained by the bag = MV = 2.5V

Loss in momentum of bullet = m(u-v) = 0.035(475 - 275) = 7 kg*m/s

2.5V = 7

V = 7 /2.5 = 2.8 m/s

Therefore, the speed of the bag is 2.8 m/s

Answer: A, B, C

Explanation: its either those:)

The magnitude of the change in the object's momentum will be equal to 80 N-s. Hence, option C is correct.

The momentum is the result of a particle's velocity and its mass. Force and motion, meaning it has both magnitude and the direction. According to Isaac Newton's second equation of motion, the force acting on a particle equals the time rate of increase of momentum.

The impulse, which is the product of the force and the intervals (the impulse), is equal to the difference in momentum, according to Newton's 2nd law, if a steady force operates on a particle for a specific amount of time. On the other hand, a particle's momentum is the amount of time needed for a consistent action to fight it to rest.

As per the given information in the question,

The initial momentum of the system is 0.

F = ma

a = F/m

a = 10/6

a = 1.67 m/s²

Use the equation of motion,

v = u + at

v = u + (1.67)(8)

v = 13.33 m

Then the momentum will be,

p = mv

p = 6 × 13.33

p = 80 N-s.

To know more about Momentum:

https://brainly.com/question/24030570

#SPJ2

Answer:

heat

When light hits an object, it either bounces off, and stays as light energy, or it is absorbed by the object. When it is absorbed, it is converted into heat energy, and the object heats up.

Answer:

10 m

Yes, the car will be able to stop before it reaches the truck.

Explanation:

[tex]u=\text{Initial velocity of the car}=\dfrac{72}{3.6}=20\ \text{m/s}[/tex]

[tex]t=\text{Time}=0.5\ \text{s}[/tex]

[tex]s=\text{Displacement}[/tex]

From the laws of motion we have

[tex]s=ut+\dfrac{1}{2}at^2\\\Rightarrow s=20\times 0.5+0\\\Rightarrow s=10\ \text{m}[/tex]

The car will travel 10 m in 0.5 seconds

[tex]a=\text{Acceleration}=-2.5\ \text{m/s}^2[/tex]

[tex]v^2-u^2=2as\\\Rightarrow s=\dfrac{v^2-u^2}{2a}\\\Rightarrow s=\dfrac{0^2-20^2}{2\times -2.5}\\\Rightarrow s=80\ \text{m}[/tex]

Total distance required for the car to stop is 10+80 = 90 m. So, the car will be able to stop before it reaches the truck.

Answer:

Your age

Explanation:

The use of energy for the purpose to boil water and warming the environment are the proper use of this lost energy.

The energy which is lost from the bulb is in the form of thermal energy. This thermal energy can be used to boil water or heating the surrounding environment so in this way the lost energy can be used properly.

So we can conclude that use of energy for the purpose to boil water and warming the environment are the proper use of this lost energy.

Learn more about energy here: https://brainly.com/question/25959744

Answer:

C) if they are based on a very small sample

Answer:

The 10-meter long rod of an SR-71 airplane expands 0.02 meters (2 centimeters) when plane flies at 3 times the speed of sound.

Explanation:

From Physics we get that expansion of the rod portion is found by this formula:

[tex]\Delta l = \alpha\cdot l_{o}\cdot (T_{f}-T_{o})[/tex] (Eq. 1)

Where:

[tex]\Delta l[/tex] - Expansion of the rod portion, measured in meters.

[tex]\alpha[/tex] - Linear coefficient of expansion for titanium, measured in [tex]\frac{1}{^{\circ}C}[/tex].

[tex]l_{o}[/tex] - Initial length of the rod portion, measured in meters.

[tex]T_{o}[/tex] - Initial temperature of the rod portion, measured in Celsius.

[tex]T_{f}[/tex] - Final temperature of the rod portion, measured in Celsius.

If we know that [tex]\alpha = 5\times 10^{-6}\,\frac{1}{^{\circ}C}[/tex], [tex]l_{o} = 10\,m[/tex], [tex]T_{o} = 0\,^{\circ}C[/tex] and [tex]T_{f} = 400\,^{\circ}C[/tex], the expansion experimented by the rod portion is:

[tex]\Delta l = \left(5\times 10^{-6}\,\frac{1}{^{\circ}C} \right)\cdot (10\,m)\cdot (400\,^{\circ}C-0\,^{\circ}C)[/tex]

[tex]\Delta l = 0.02\,m[/tex]

The 10-meter long rod of an SR-71 airplane expands 0.02 meters (2 centimeters) when plane flies at 3 times the speed of sound.

Answer:

Explanation:

We are going to use the newtons law of motion (first law) to solve this problem

where F is the force in Newton

m is the mass in kg and

a is the acceleration in m/s^2

given data

mass of the toy m= 1kg

force with which the toy is thrown = 20N

susbtituting we have

20=1*a

a= 20m/s^2

Answer:

50 meters

Explanation:

50 meters

50 meters

the chemical formula for periodic acid is HI04

I hope this helps you

:)

Answer:

A. Two small objects hsgsggahahahahahshgsgegwfw

Answer:

gases that are not good at absorbing long wave photons of infra red.

Explanation:

Option B is correct

Answer:

c.97.1j

Explanation:

yan po ang answer

The change in the kinetic energy is (22000 + 416500sinθ) J

The net force on the car F' = F - f - N where

So, F' = F - f - N

F' = F - f - mgsinθ

Since the car moves at constant velocity, the net force F' = 0

So, F' = F - f - mgsinθ

F - f - mgsinθ = 0

F = f + mgsinθ

From the work-kinetic energy theorem,

The kinetic energy change of the car ΔK equals the work done by force on car, W

ΔK = W = Fd where

ΔK = Fd

= (f + mgsinθ)d

=  fd + mgdsinθ

Substituting the values of the variables into the equation, we have

ΔK = fd + mgdsinθ

= 440 N × 25 m + 1700 kg × 9.8 m/s² × 25 m × sinθ

= 22000 Nm + 416500sinθ Nm

= (22000 + 416500sinθ) J

So, the change in the kinetic energy is (22000 + 416500sinθ) J

Learn more about change in kinetic energy here:

https://brainly.com/question/25853587

Answer:

Yellow

Explanation:

So while red, green and blue light shine upon the shirt, only red and green light will reflect from it. Red and green light striking your eye always gives the appearance of yellow; for this reason, the shirt will appear yellow.

Here is your Answer:-

Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object. (That hot sand passed the heat energy right into my poor feet)!

Answer:

Conduction is the transfer of thermal energy from one object to another through the movement of molecules. Heat flows from one molecule to another because the particles are in direct contact with one another.

Answer:

a.    -For example, when you go to the supermarket with your parents and they let you drive the cart. You step on the back and push off which lets you get far in the isle, but in a bit you start slowing down

and eventually stop at all.

b. -First, when a car is driving the wheels meet friction all the time, as that happens the wheels get a bit hot.

-Second, when you are cold you rub your hands together fast until they are warm.

c.-First, you wouldn't be able to land an airplane correctly and it would be very, very hard to stop it from moving, as well as the car .

-We wouldn't be able to ice skate, we wouldn’t be able to slow down and turn normally.

Explanation:

(a) Friction is the force that opposes the rubber tyre from sliding on the road surface. This friction avoids skidding of vehicles. Applications of breaks in the vehicle to stop it- Friction braking is the most widely used braking method in vehicles.

(b) When surfaces in contact move relative to each other, the friction between the two surfaces converts kinetic energy into thermal energy (that is, it converts work to heat). This property can have dramatic consequences, as illustrated by the use of friction created by rubbing pieces of wood together to start a fire.

(c)

"Force that resists the sliding or rolling of one solid object over  another." Frictional forces, such as the traction needed to walk without slipping, may be beneficial, but they also present a great measure of opposition to motion.

"Kinetic energy is a form of energy that an object or a particle has by reason of its motion." If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

"Thermal energy refers to the energy contained within a system that is responsible for its temperature." Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process.

Know more about friction here

https://brainly.com/question/13000653

#SPJ2

Answer:.07

Explanation hop this helps

Answer:.07

Explanation:

w=f.d

w=130.9

w=1170(a)

Answer:

A-1170

Explanation:

9x130=1170

dxf=w

Answer:

Summary of Photorealism

The name Photorealism (also known as Hyperrealism or Superrealism) was coined in reference to those artists whose work depended heavily on photographs, which they often projected onto canvas allowing images to be replicated with precision and accuracy. The exactness was often aided further by the use of an airbrush, which was originally designed to retouch photographs. The movement came about within the same period and context as Conceptual art, Pop art, and Minimalism and expressed a strong interest in realism in art, over that of idealism and abstraction. Among several male practitioners of Photorealism there is an interest in themes of machinery and objects of industry such as trucks, motorcycles, cars, and even gumball machines, whereas Audrey Flack, the sole female practitioner, infuses her works with greater emotionality and the transience of life. Ultimately, the Photorealists were successful in attracting a wide audience, but they are often overlooked by art historians as an important avant-garde style.

Key Ideas & Accomplishments

Explanation:

Sound waves and other mechanical waves can move energy through solid objects. Energy can be transferred through matter and space via electromagnetic waves, such as light waves. Thus, option A is correct.

The shifting magnetic and electric fields are what produce electromagnetic waves. They are created by the charged particles' oscillation.

Each type of wave has a drastically different speed as a result of these variations. Mechanical waves move much more slowly than electromagnetic waves, which move at the speed of light.

Mechanical waves are referred to as a periodic disturbance, whereas electromagnetic waves are referred to as a disturbance.

Therefore, electromagnetic and mechanical waves share energy as common characteristics.

Learn more about electromagnetic and mechanical waves here:

https://brainly.com/question/3101711

#SPJ2

Answer:

static electricity and then lightning rod

1. friction

2. Lightning rod/conductor