which measurement is the most accurate measure of the density of platinum?

Answer:

Light energy

Explanation:

When an electron releases or absorbs energy, it goes into an "exited state" which means it goes into a lower or higher energy level respectively. This will radiate light energy.

After the helium flash in a star, the core quickly heats up and expands.

A helium flash is the very brief thermal runaway nuclear fusion of significant amounts of helium into carbon during the red giant phase of low mass stars (between 0.8 solar masses (M) and 2.0 M). The centre expands as a result of the core becoming warmer as a result of this.

Following the onset of helium nuclear reactions in a star's core, helium nuclei fuse to create carbon and oxygen.

Most of the time, the stars' positions in reference to one another remain constant. Convergence between Orion and Taurus is ongoing. Ursa Minor is never far from Draco. The stars appear to us as an endless backdrop painting in the sky that hardly moves in reference to one another.

To know more about stars:

https://brainly.com/question/29572549

#SPJ4

The mass of the other star in a binary system is 0.14 solar masses.

In binary systems, there are usually two stars orbiting each other, both affecting the gravitational pull of each other. According to Kepler’s laws of planetary motion, the square of the period of revolution is directly proportional to the cube of the semi-major axis of the ellipse traced by the planet/satellite.

So, using the above formula, we get:

T² = 4π²a³/G(M + m)

where, M = mass of 1st star and m = mass of 2nd star.

Using given values, we have:

55.4² = 4π² (24.2)³/G(0.7 + m)

m = 0.14 solar masses

Therefore, the other star in a binary system has a mass of 0.14 solar masses.

Learn more about Kepler’s laws of planetary motion here: https://brainly.com/question/22424027

#SPJ11

The HST speed ratio is: 19.29:1.

A hydrostatic transmission has a pump displacement of 1 cir and a motor displacement of 19 cir.

The volumetric efficiency of the pump is 94 % and the volumetric efficiency of the motor is 94 %. The mechanical efficiency of the pump is 95 % and the mechanical efficiency of the motor is 93 %.

Hydrostatic transmission (HST) comprises of a hydraulic pump with a variable displacement capacity and a hydraulic motor with a fixed displacement capacity. HST consists of a hydraulic circuit that comprises of a pump, motor, pipes, hoses, hydraulic fluid, and regulators. They are frequently used in construction equipment like bulldozers and excavators.

HST Speed Ratio Calculation Speed ratio for the hydrostatic transmission (HST) can be calculated by the formula below: Speed Ratio = (Motor Displacement/Pump Displacement) x (Efficiency of the Pump/Efficiency of the Motor)

Here, Motor Displacement = 19 cir

Pump Displacement = 1 cir

Efficiency of the Pump = 94%

Mechanical Efficiency of the Motor = 93%

Putting the values in the formula, we get; Speed Ratio = (19/1) x (0.94/0.93) = 19.29:1

To know more about "Speed Ratio" refer here:

https://brainly.com/question/30097482#

#SPJ11

It would take approximately 161 minutes to raise the temperature of the air in the living room by 10.0°C using the given heater.

Using the formula P = IV, where P is power, I is current, and V is voltage, we can find the current flowing through the heating coil,

I = P/V = 1500 W/120 V = 12.5 A

To find the resistance of the heater, we can use Ohm's law, which states that V = IR, where V is voltage and R is resistance,

R = V/I = 120 V/12.5 A = 9.6 ohms

To calculate the amount of heat required to raise the temperature of the air in the living room, we can use the formula Q = mcΔT, where Q is heat, m is mass, c is specific heat, and ΔT is the change in temperature.

First, we need to find the mass of the air in the living room. The volume of the living room is 3.00 m × 5.00 m × 8.00 m = 120.00 m^3. Since the density of air is 1.20 kg/m^3, the mass of the air in the living room is,

m = density × volume = 1.20 kg/m^3 × 120.00 m^3 = 144 kg

Next, we can calculate the amount of heat required,

Q = mcΔT = (144 kg)(1006 J/(kg·°C))(10.0°C) = 1.45 × 10^7 J

Finally, we can use the formula Q = Pt, where t is time, to find the time required to generate this amount of heat,

t = Q/P = (1.45 × 10^7 J)/(1500 W) = 9667 seconds ≈ 161 minutes.

To know more about resistance, here

brainly.com/question/30720709

#SPJ4

The distance d so that the vertical reaction under the front wheels (point b) is 300lb due to the three force is equal to 200 ft. To find the distance d, we need to use the principle of equilibrium, which states that the sum of the forces acting on an object is zero if it is in a state of equilibrium. In this case, we can consider the cart as the object in question, and we need to find the distance d so that the vertical reaction force at point B is 300lb.

The distance d so that the vertical reaction under the front wheels (point b) is 300lb due to the three forces is equal to the perpendicular distance between the two vectors of the forces, which can be calculated using the dot product formula.


The dot product of two vectors can be calculated using the formula:

d = ((F1x × F2x) + (F1y × F2y))/|F2|


Where F1 and F2 are the two forces, F1x and F1y are the x and y components of F1, and F2x and F2y are the x and y components of F2. |F2| is the magnitude of F2.


By plugging in the x and y components of the forces, we can calculate the distance d:

d = ((-50 × 200) + (400 × 300))/500 = 200 ft


Therefore, the distance d so that the vertical reaction under the front wheels (point b) is 300lb due to the three forces is equal to 200 ft.

For such more questions on force

https://brainly.com/question/15251816

#SPJ11

The best example that shows the potential energy is a body at rest from some height from the ground, thus the correct answer is option b.

Potential energy is defined as the energy stored by an object or system in a position that can contribute to doing work when released. It is the stored energy of an object or system.

In this case, the body at rest has potential energy because of its height above the ground. As it falls, the potential energy is converted to kinetic energy.

Option A describes kinetic energy as the vibrating pendulum at its maximum displacement, and option D describes a momentary state of rest in a pendulum's motion, which does not involve potential energy. Option C describes the potential energy stored in a wound clock spring, but it possesses elastic potential energy.

Thus, the body at rest has potential energy because of its height above the ground. Thus, option b is correct.

Learn more about Potential energy here:

https://brainly.com/question/14427111

#SPJ11

The volume of the log is estimated to be 3.225 m3. The total volume of the log is the sum of the volumes of each interval.

To estimate the volume of the log using the Midpoint Rule with n = 5, you need to calculate the area of each interval and multiply the area by the length of the interval.

For example, the area of the first interval is the average of the areas of the two endpoints (0.69 + 0.65)/2 = 0.67 m2. The length of the interval is 1 m, so the volume of this interval is 0.67 m2 x 1 m = 0.67 m3. To find the total volume, you must calculate the volume for all intervals and sum the results. The intervals and the corresponding areas and volumes are listed below:

The total volume of the log is the sum of the volumes of each interval, which is 0.67 m3 + 0.645 m3 + 0.63 m3 + 0.595 m3 + 0.575 m3 = 3.225 m3. Therefore, the volume of the log is estimated to be 3.225 m3.

Learn more about volume: brainly.com/question/27710307

#SPJ11

The force of gravity between two magnets is really considerably smaller than the magnetic force, despite the fact that two magnets correctly aligned would attract and stay together firmly.

Any two mass-containing things in the cosmos are subject to the basic natural force of gravity. According to the formula F = G * m1 * m2 / r2, where F is the force, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them, the gravitational force between two objects varies in strength depending on their masses and the distance between them. The magnetic fields of two magnets are what create the force between them. Two magnets are aligned properly and it causes them to stick together tightly.

learn more about force  here:

https://brainly.com/question/13191643

#SPJ4

Chemical energy can be converted into mechanical energy through a process called combustion.

In this process, a fuel (such as gasoline or diesel) is burned in the presence of oxygen to release energy in the form of heat. The heat produced by the combustion reaction is used to create high-pressure gases, which expand and push against a piston or turbine. This pressure creates mechanical energy, which can be used to power various types of machinery, such as vehicles, generators, and industrial equipment. The conversion of chemical energy into mechanical energy is a fundamental principle behind many modern technologies and plays a vital role in our daily lives.

To know more about combustion, here

brainly.com/question/15117038

#SPJ4

Physical weathering is the type of weathering that is most likely to be associated with colder climates.

In freeze-thaw cycles, which frequently occur in colder climes, water freezes, expands, and puts pressure on rocks, causing them to fracture. An illustration of physical weathering is this. Additional types of physical weathering that can happen in colder climates include thermal expansion, which happens when rocks expand and contract as a result of temperature fluctuations, and frost wedging, which happens when water freezes in cracks in rocks and causes them to enlarge. On the other hand, chemical weathering is more prevalent in hotter, wetter regions where there is more water and moisture to support chemical reactions that decompose rocks. Any climate can experience biological weathering, but warm, humid regions with more plant and microbial activity are where it is most likely to happen.

Learn more about weathering here:

https://brainly.com/question/14426457

#SPJ4

The wavelength of peak thermal emission from a sunspot can be calculated using Wien's law and a sunspot temperature of 3800 K.

Wien's Law states that the wavelength of peak thermal emission is inversely proportional to the temperature of the body emitting radiation. It is given by:

λ_max = b/T

where b is the Wien constant, 2.898 x 10^-3 m K, and T is the temperature of the emitting body. Substituting the given values into the equation,λ_max = b/Tλ_max = (2.898 x 10^-3 m K)/(3800 K)λ_max = 7.63 x 10^-7 m

The answer is expressed to three significant figures as 7.63 x 10^-7 m, with units of meters. Therefore, the wavelength of peak thermal emission from a sunspot is 7.63 x 10^-7 m.

Learn more about Wien's law  at  brainly.com/question/1417845

#SPJ11

Option b. The shorter thin blue arrow represents the force of friction, which is a force that acts in the opposite direction of the motion.

Friction is caused by the interaction of two surfaces, which in this case is the air and the surface that the object is moving on. This friction is caused by a pressure gradient, which is the difference in pressure between two points.

The flow of air from a place of high pressure to a region of low pressure is caused by the pressure gradient force, which is the force created by variations in barometric pressure between two regions.

Therefore the correct option is b.

Learn more about "pressure gradient, friction and motion" at : https://brainly.com/question/453639

#SPJ11

The goal of correlation is to gain a more comprehensive view of the geologic history of a region. the correct option is B.

Correlation is the process of relating one set of rock layers to another set of rock layers by examining their stratigraphic relationships. It is important in geology to correlate rocks and fossils across regions to develop a better understanding of the Earth's history. Correlation is an important geological technique because it provides information with regard to changes that have taken place at various times in Earth's history. It also provides information about the times at which such changes have occurred.

To know more about Correlation: https://brainly.com/question/6454167

#SPJ11

The Volumetric efficiency of the pump is the ratio of the actual capacity to the theoretical capacity of the pump.

Volumetric efficiency of the pump = Actual capacity of the pump / Theoretical capacity of the pump

Given Information

The provided information is,

Find

The theoretical capacity of the pump is given by the following formula,

Theoretical capacity of the pump = π/4 x d² x l x n

where:

For the given problem,

We need to find the diameter of the pump and length of the pump to calculate the theoretical capacity of the pump.

Now, we have the actual capacity of the pump.

As we don't have the diameter and length of the pump, it is impossible to calculate the theoretical capacity of the pump.

Hence, the Volumetric efficiency of the pump cannot be calculated.

Learn more about Volumetric efficiency: https://brainly.com/question/14783214

#SPJ11

Answer:

The four planets were approximately aligned on one side of the Sun and we used the gravity of each planet to speed up the spacecraft to get to the next one in its path

Explanation:

All the Options 1, 2, 3, 4  are true about the Voyager 2 spacecraft to make a "tour" of all four of the jovian planets in the late 1970's and the 1980's.

The Voyager 2 spacecraft was able to make a "tour" of all four of the jovian planets in the late 1970's and the 1980's due to the following:

Learn more about "NASA and spacecraft" at: https://brainly.com/question/16538247

#SPJ11

The direction of the force on the charge due to the magnetic field is given by option B, which says that vector F points into the page

For each of the situations below, a charged particle Part B enters a region of uniform magnetic field. Determine the direction of the force on each charge due to the magnetic field.

The direction of the force on the charge due to the magnetic field is given by option B, which says that vector F points into the page. Hence, option B is the correct answer.

The Lorentz force is the force experienced by a charged particle in an electromagnetic field. This force is given by the formula F = q(v × B), where F is the force, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field that the particle is moving through.

This equation applies only to situations where the magnetic field is constant and the velocity of the charged particle is perpendicular to the magnetic field.

Learn more about direction of the force: brainly.com/question/30890687

#SPJ11

The orbital speed of the second satellite is 6.55 × 10³ m/s.

The formula used to find the orbital speed of a satellite is given as v=√(GM/r).

Therefore, the value of the first satellite's speed is given as v₁=1.89×104 m/s, and the radius is r₁=2.76×106 m. Using the above formula, the mass of the planet is given as:

M= v²r/G= (1.89×104 m/s)² (2.76×106 m)/(6.6743 × 10⁻¹¹ Nm²/kg²) = 5.31 × 10²⁴ kg.

Now, the orbital speed of the second satellite, given as v₂, is equal to:

v₂ = √(GM/r₂); where G = gravitational constant = 6.6743 × 10⁻¹¹ Nm²/kg²;

M = mass of the planet = 5.31 × 10²⁴ kg;

r₂ = radius of orbit of the second satellite = 6.98 × 10⁶ m.

Substituting the values given above, we get:

v₂ = √(GM/r₂)= √[(6.6743 × 10⁻¹¹ Nm²/kg²) × (5.31 × 10²⁴ kg) / (6.98 × 10⁶ m)] = 6.55 × 10³ m/s

To know more about "orbital speed" refer here:

https://brainly.com/question/541239#

#SPJ11

The magnitude of the centripetal acceleration (ac) of the car is equal to the tangential acceleration (at) when the car has been accelerating for 1.22 seconds.

The given information is the steady acceleration of the car is 1.5 m/s². We have to find the time taken by the car to reach the magnitude of its centripetal acceleration equal to the tangential acceleration.

Let, v = tangential velocity of the car

a = acceleration of the car

T = time taken by the car to reach the magnitude of its centripetal acceleration equal to the tangential acceleration

Given, the steady acceleration of the car is a = 1.5 m/s²

The centripetal acceleration of the car is given as, ac = v² / r... (i)

We know that the tangential acceleration of the car is a = dv / dt

Where v is the tangential velocity of the car and t is the time taken by the car.

So, dv = a dt Integrating both sides, we get  v = at + cv = at + c... (ii)

At t = 0, v = 0So, c = 0

Putting the value of v in equation (i), we get

ac = (at)² / r... (iii)At t = T, ac = a

Substituting these values in equation (iii), we get

a = (aT)² / raT² = r... (iv)

Hence, the time taken by the car to reach the magnitude of its centripetal acceleration equal to the tangential acceleration is T = √r/a. So, the required time is √r/a = √1.5 m/s² = 1.22 s.

To know more about  centripetal acceleration please visit :

https://brainly.com/question/79801

#SPJ11

A kangaroo jumps straight up to a vertical height of 1.45 m. The time the kangaroo was in the air before returning to the ground was 0.5304 seconds. The given data can be used to calculate the time the kangaroo was in the air before returning to the ground.

The initial velocity of the kangaroo is zero since it was at rest, and it jumps straight up to a height of 1.45 m from the ground.

Using the formula for vertical motion,

vf = u + gt,

where

We can substitute these values and gett = 0.5304 seconds

Therefore, the kangaroo was in the air for 0.5304 seconds.

Learn more about jump vertically: https://brainly.com/question/13198086

#SPJ11

The time taken to fill the bucket with a garden hose attached with a nozzle of inner diameter of 1 in and  reduces to 0.4 in at the nozzle exit is 0.010268347 seconds.

Formula used:Q = AV Where Q is the volume of water, A is the area of the hose, and V is the velocity of water.Substituting the given values,

Volume of the bucket= 20 gal× 3.7854 L/ gal = 75.708 L= 75.708000 cm³

Diameter of the hose = 1 in = 2.54 cm.

Radius of hose at entry = d/2 = 2.54/2 cm. Radius of hose at nozzle exit = d/2 = 0.4/2 cm.

Velocity of water = 6 ft/s = 182.88 cm/s.

Area of hose at entry = πr² = π(1.27)² cm² = 5.07 cm².Area of hose at nozzle exit = πr² = π(0.2)² cm² = 0.1257 cm²

Initial volume of water = 0 (since there is no water initially in the bucket).Let t be the time taken to fill the bucket.Q1 = A1V1t1 = 5.07 cm² × 182.88 cm/s × tVolume of water after time t = Q1 = 5.07 × 182.88t cm³.Let us determine the cross-sectional area of the nozzle.A2 = πr² = π (0.2)² cm² = 0.1257 cm²

Now, we can determine the volume of water that comes out in time, t.Q2 = A2V2t2 = 0.1257 × V2 × tThe volume of water that comes out in time t = Q2 = 0.1257 × V2 × t.Let the density of water be ρ.Substituting the values,Q1 = Q2∴5.07 × 182.88t = 0.1257 × V2 × tV2 = 5.07 × 182.88/0.1257= 7376.376 cm³/s.Let the mass of water flowing out per second be m.V2 = A2v2= πr²v2= 0.1257 v2m/ρ = A1V1= 5.07 cm² × 182.88 cm/sm/ρ = 5.07 × 182.88/0.1257m = 6.112 g/s

The mass of water flowing out per second is 6.112 g/s.The time required to fill the bucket can be calculated as follows.Total volume of water to be filled in the bucket = 75.708000 cm³Time taken to fill the bucket, t = (Total volume of water to be filled in the bucket)/Volume of water filled in 1 second t = 75.708000 cm³/7376.376 cm³/st = 0.010268347 s. Therefore, the time taken to fill the bucket is 0.010268347 seconds.

More on velocity and time: https://brainly.com/question/29426396

#SPJ11

The distance which the football which cover before landing back on the ground level will be about 56.4 meters.

The mass of football, m = 0.43 kg, Initial velocity of football (v) = 24 m/s, Angle of inclination(θ) = 53°

From the given data, we know that the vertical component of the initial velocity is given by, vsin(θ) and the horizontal component of initial velocity is given by, vcos(θ). So, the time taken by the football to reach the maximum height is given by,

t = (vsin(θ))/g

Here, g = 9.8 m/s²

Now, the maximum height attained by the football is given by,h = (vsin(θ))²/(2g).

Therefore, the time of flight or the total time which is taken by the football to land on the ground level is given by,

T = 2t

Now, the horizontal distance travelled by the ball is given by, d = (vcos(θ))T

Substituting the given values in the above formulas, we get:

t = (24sin(53°))/9.8 = 1.71 s

h = (24sin(53°))²/(2×9.8) = 23.4m

T = 2×1.71 = 3.42 s

d = (24×cos(53°))×3.42 = 56.4 m

Therefore, the football will go 56.4 m before it is landing back on the level ground.

Learn more about Velocity here:

https://brainly.com/question/30559316

#SPJ11

Among the original group of 10,000 stars, approximately 100 stars have planets.

The following data has been given about planetary systems using the transit technique: about 1% of planetary systems can be detected using the transit technique. Imagine that you studied a group of 10,000 stars for many years, watching for them to dip in brightness.

After a long survey, you have discovered 10 planetary systems - stars with planets orbiting them.

The proportion of planetary systems that can be discovered using the transit technique is 1%.The planetary system detected: 10 planets out of 10,000 stars

Among the original group of 10,000 stars, we can estimate that 1% of the stars actually have planets, based on the proportion of the planetary systems that can be detected using the transit technique.

Therefore, the estimated number of stars with planets will be: 1/10 * 10000

= 100

Thus, an estimated 100 stars out of the 10,000 that were observed may have planets.

Learn more about planetary system here: https://brainly.com/question/28430876

#SPJ11

When you heat an air-filled balloon, the movement of air molecules inside the balloon increases, causing the air to expand and the balloon to inflate.

Heating the air inside the balloon increases the temperature of the air molecules, causing them to move more rapidly and collide with each other more frequently.

This increased movement and collision between molecules causes them to spread out and fill a larger volume, which leads to the expansion of the air inside the balloon.

As the air inside the balloon expands, it exerts a greater pressure on the walls of the balloon, causing it to inflate.

For more similar questions on temperature

brainly.com/question/23905641

#SPJ11

Answer:

The reflection of light is the process by which light bounces off a surface and changes direction. When light waves hit a smooth and shiny surface, such as a mirror or a still body of water, the waves bounce back at the same angle as they hit the surface. This is known as the law of reflection. The angle of incidence, which is the angle at which the light waves hit the surface, is equal to the angle of reflection, which is the angle at which the light waves bounce off the surface. The reflection of light plays a crucial role in our daily lives, from the way we see ourselves in the mirror to the way light is directed in optical devices such as telescopes and microscopes.

Explanation:

Answer: When a ray of light approaches a smooth polished surface and the light ray bounces back, it is called the reflection of light.

Explanation:

A reflection is a transformation that acts like a mirror. The best surfaces for reflecting light are very smooth, such as a glass mirror or polished metal.

Answer:

An electric field is essentially a force field that’s created around an electrically charged particle. A magnetic field is one that’s created around a permanent magnetic substance or a moving electrically charged object.

Electric fields are created by electric charges.

Permanent magnets are objects that produce their own persistent magnetic fields.

in electric fields Positive and negative charged objects attract or pull each other together, while similar charged objects (2 positives or 2 negatives) repel or push each other apart

in magnetic fields, Similar magnetic poles repel and unlike magnetic poles attract each other.

Attach a wire running from the negative terminal of the battery to one sheet and a wire running from the positive terminal of the battery to the other sheet

A magnetic field can be created by running electricity through a wire. All magnetic fields are created by moving charged particles. Even the magnet on your fridge is magnetic because it contains electrons that are constantly moving around inside

The maximum length of the spring (Lmax) is about 1.25 meters.

To calculate the maximum length of the spring during the motion that follows, we can use the following equation:

Lmax = L₀ + (mv²) / (2k)

where L₀ is the unstretched length of the spring, m is the mass of the object, v is the initial velocity, and k is the spring constant. In this case, L₀ = 0.42 m, m = 0.3 kg, v = 1.2 m/s, and k = 39 N/m.

The maximum length of the spring is:

Lmax = 0.42 + (0.3 × (1.2)²) / (2 × 39) = 1.25 meters

Therefore, the maximum length of the spring during motion is 1.25 meters.

Learn more about Spring here:

https://brainly.com/question/14670501

#SPJ11

A Nichrome wire 42 cm long and 0.28 mm in diameter is connected to a 2.1 V flashlight battery. You don't have to know how the wire is bent because it doesn't affect the resistance of the wire.

Nichrome is a type of resistance wire made from a nickel-chromium alloy. It has a high melting point and can withstand high temperatures. Nichrome wire is commonly used in heating elements, such as those found in toasters and hairdryers. The resistance of a wire depends on its length, cross-sectional area, and resistivity.

The resistance of a wire is given by the formula:

R = (ρl)/AWere,ρ = resistivity

l = length of wire

A = cross-sectional area of the wire

Resistance is directly proportional to the length of the wire and inversely proportional to the cross-sectional area of the wire. Therefore, a longer and thinner wire will have a higher resistance than a shorter and thicker wire. The resistivity of the material is also an important factor that affects the resistance of a wire.Since the length and diameter of the Nichrome wire are given, the resistance of the wire can be calculated using the formula mentioned above. Once the resistance is known, the current flowing through the wire can be calculated using Ohm's law. The voltage of the battery is also given, so the power dissipated by the wire can be calculated. The way the wire is bent does not affect its resistance or other electrical properties, so it is not necessary to know how it is bent.

Therefore, you do not have to know how the Nichrome wire is bent in order to calculate the current through the wire connected to a 2.1V flashlight battery.

To know more about Nichrome wire please visit :

https://brainly.com/question/23943983

#SPJ11

Answer:

Inelastic collision

Explanation:

In the question, it states that when the ball bounced off the ground, it lost 0.15m. This means that it yielded some kinetic energy. Which is an inelastic collision.

Molly's experiment involved kicking a soccer ball with varying amounts of force and observing the resulting change in the ball's motion.

Newton's three laws of motion can help explain how the force of Molly's kicks affected the ball's movement.

Newton's first law of motion states that an object at rest will stay at rest and an object in motion will stay in motion with a constant velocity unless acted upon by an unbalanced force. In this experiment, the soccer ball was at rest before each kick, so the force of Molly's kicks acted as an unbalanced force, causing the ball to accelerate and move. The greater the force of her kick, the greater the acceleration and resulting distance the ball traveled.

Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied and inversely proportional to its mass. In this case, the mass of the soccer ball remained constant, but the force of Molly's kicks varied. As a result, the acceleration of the ball was directly proportional to the force of her kick.

Finally, Newton's third law of motion states that for every action, there is an equal and opposite reaction. When Molly kicked the soccer ball, the ball exerted an equal and opposite force back on her foot, which is why she felt the impact of the kick.

Energy transfer also played a role in this experiment. When Molly kicked the ball, she transferred energy from her foot to the ball. The greater the force of her kick, the more energy was transferred to the ball, resulting in a greater distance traveled.

To know more about Newton's three laws of motion, visit:

https://brainly.com/question/29775827

#SPJ1