Explanation:
The scientific method involves making observations and asking questions. Scientists form hypotheses based on these observations and then develop controlled experiments to collecting and analyze data. Using this data, they are able to draw conclusions and form questions for new scientific research.
:)ᴍᴀʀᴋ ᴀꜱ ʙʀᴀɪɴʟɪꜱᴛ
Some elements got their names from ancient languages
such as Greek or Latin
TRUE or FALSE
If so list some examples of elements
Answer:
True
Explanation:
this was on one of my quizziz
Balance equation mg3n2+h2so4=mgso4+(nh4)2
Answer:
Mg₃N₂ + 4 H₂SO₄ ⇒ 3 MgSO₄ + (NH₄)₂SO₄
Explanation:
To balance an equation, you need to make both sides of the equation have equal number of each element. Also, I think that you didn't write the whole equation since the reaction you gave is not likely.
Mg₃N₂ + 4 H₂SO₄ ⇒ 3 MgSO₄ + (NH₄)₂SO₄
Oxygen gas was produced in a reaction and collected over water. A 136.1 mL mL sample of gas was collected over water at 25C and 1.06 atm. The vapor pressure of water is 23.76 mmHg at 25C. Find the mass of ocygen gas collected in a reaction and collected over water. A 136.1 mL sample of gas was collected over water at 25C and 1.06 atm. The vapor pressure of water is 23.76 mmHg at 25C. Find the mass of oxygen gas collected.
Answer:
Explanation:
We shall find volume of gas at NTP or at 273 K , 760 mm of Hg .
Pressure of given gas = 1.06 x 760 mm of Hg less vapor pressure of water .
= 805.6 - 23.76 = 781.84 mm of Hg
For it we use gas law formula ,
P₁V₁ / T₁ = P₂V₂ / T₂
781.84 x 136.1 / ( 273 + 25 ) = 760 x V₂ / 273
= 128.26 mL .
= 128.26 x 10⁻³ L .
22.4 L of oxygen will have mass of 32 g
128.26 x 10⁻³ L of oxygen will have mass of 32 x 128.26 x 10⁻³ / 22.4 g
= 183.22 mg .
Which obstacle was faced by African Americans serving in the armed forces during World War II?
They were forced to serve in segregated units.
They were not subject to military conscription.
ОООО
None of them ever saw combat during the war.
They were placed under French command.
Analysis: Consider Joe's story. IF the test shows he does have Marfan syndrome, and if he inherited the Marfan gene from his mother, does this mean that his brother and sister also have it? You may want to draw up a Punnett Square or drawing to help you explain your answer. HINT: Is there any suggestion that he got a Marfan gene from his father?
We inherit genes from our biological parents in specific ways. One way is called autosomal dominant inheritance.
What is autosomal dominant inheritance?
Autosomal dominant inheritance means that the gene in question is located on one of the autosomes. These are numbered pairs of chromosomes, 1 through 22. (These chromosomes do not determine an offspring's gender.) Dominant means that only one gene from one parent is necessary to pass down a trait or a disorder. When a parent has a dominant trait or disorder, there is a 50 percent chance that any child he or she has will also inherit the trait or disorder:
Genetic illustration demonstrating autosomal dominant inheritance
Click Image to Enlarge
What is Marfan syndrome?
Marfan syndrome occurs in one of 5,000 live births. It is a connective tissue disorder associated with autosomal dominant inheritance. Connective tissue is abundant in the body and is important as a supporting structure. It is especially important for the musculoskeletal system. It also provides support for other body systems as well, including the eyes and the heart. The gene for Marfan syndrome is called fibrillin-1. This gene is localized to chromosome #15 on the long arm (q) at 15q21.1.
Common findings in individuals with Marfan syndrome include those related to connective tissue disorders. These include abnormal enlargement of the aortic root of the heart, dislocated lenses of the eyes, and a tall, lanky body with increased joint mobility, scoliosis, long flat feet, and long fingers. Findings may vary among individuals diagnosed with this condition, even within a family.
If an individual carries an abnormal gene for Marfan syndrome, that individual has a 50 percent risk of passing down the disorder to each future offspring. If a person does not carry the gene abnormality, then the risk for occurrence of the disorder in future offspring is the same as for the general population.
Explanation:
What enzyme catalyses the reaction of PRPP transfer to hypoxanthine with
formation of IMP?
Answer:
HPRT
Explanation:
HPRT catalyzes the salvage reactions of hypoxanthine and guanine with PRPP to form IMP and GMP
The formation of GMP from IMP requires oxidation at C-2 of the purine ring, followed by a glutamine-dependent amidotransferase reaction that replaces the oxygen on C-2 with an amino group to yield 2-amino,6-oxy purine nucleoside monophosphate, or as this compound is commonly known, guanosine monophosphate.
The amount of freshwater on the earth is
3percent
is fresh
pls make me brainliest
plsssssss
#captainpower
The answer please thank you
Answer:
B
Explanation:
Given the reaction
3 H3PO4 + 2 Ba(OH)2 ⇒ BaPO4 + 6 H20
How many grams of precipitate could you make if you reacted 286.0 mL of 3.000 M H3PO4 with 855.0 mL of 1.400 M Ba(OH)2
Answer:
240.17 g Ba3(PO4)2
Explanation:
1. Determine the limiting reactant.
2H3PO4 + 3Ba(OH)2 --> Ba3(PO4)2 + 6H2O
moles H3PO4 = M x V = 3 x 0.286 = .858 moles H3PO4
moles Ba(OH)2 = M x V = 1.4 x 0.855 = 1.197 moles Ba(OH)2
ratio Ba(OH)2 : H3PO4 = 1.197: .858 = 1.39: 1
stoichiometric ratio Ba(OH)2 : H3PO4 = 3:2
Ba(OH)2is the limiting reactant
MM Ba3(PO4)2 = 601.92 g/mol
g Ba3(PO4)2 = moles Ba(OH)2 x(1 mol Ba3(PO4)2/3 moles Ba(OH)2) x (MM Ba3(PO4)2/ 1mol Ba3(PO4)2) = 1.197 x 1/3 x 601.92 = 240.17 g Ba3(PO4)2
Need QUICK ANSWERS!!!!!!!!!!!!!!!!!!
Answer: 125.0964 g
Explanation:
Density = mass/volume
Density = 2.7 gcm-3
Volume = 2.7*14.3 = 46.332
Mass=?
Mass= density*volume
= 2.7 x 46.332 = 125.0964 g
Hope this helps! :)
hi, if your looking for extra points (50+) and brainiest here is ur chance, answer this question correctly plz
Its the warm air what helps them also of energy of the sun
Calculate the moles of electrons obtained from 250coulomb of electricity
Answer:
[tex]n=0.00259 mol[/tex]
Explanation:
Hello there!
In this case, since the Faraday's constant is 96500 Coulombs per mole, we can set up the following process to obtain the moles in 250 Coulombs:
[tex]n=\frac{250C}{96500C/mol}\\\\n=0.00259 mol[/tex]
Best regards!
I need help with this chem problem!
Use the solubility rules from the Lab 4 introduction and your knowledge of qualitative separation schemes from the lab to answer the following questions. The qualitative analysis experiment you did is actually an abbreviated version of a much larger analysis scheme in which many different cations are separated and identified. Suppose a mixture contains Ag , K , NH4 , Hg22 , Pb2 , Mg2 , Sr2 , Ba2 , Cu2 , Al3 and Fe3 .
(a) Which of the following ions could you separate, by causing them to precipitate, with the addition of HCl?
Ag+ K+ NH4+
Hg22+ Pb2+ Mg2+
Sr2+ Ba2+ Cu2+
Al3+ Fe3+
(b) After the addition of HCl, the above sample is centrifuged and decanted. Which of the following cations remaining in the supernatant could you separate, by causing them to precipitate, with the addition of H2SO4? (Hint: H2SO4 is a source of sulfate ions. Select all that apply.)
Ag+ K+ NH4+
Hg22+ Pb2+ Mg2+
Sr2+ Ba2+ Cu2+
Al3+ Fe3+
Answer:
a13+a13
Explanation:
Which statement describes a chemical property of sodium
A Sodium changes from a solid to liquid at a temperature of 97.8°C
B Sodium has the ability to react with chlorine and from a new substance.
C Sodium has destiny if 0.97 g/cm3.
D Sodium takes the form of a solid at room temperature
Answer:
Option b is show the chemical property of sodium....
Find a part of the article that describes signals that are sent within Diego’s body. Where does the signal come from, and how does it cause Diego to feel or react?
Answer:
The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
What are sensory receptor?The capacity to react to stimuli is one of the traits of a living thing. The highly developed sensory system of humans can concurrently analyze thousands of incoming messages.
Dendrites of sensory neurons are specialized for receiving particular types of stimuli and are known as sensory receptors. There are three ways to classify sensory receptors.
Exteroceptors are located at or close to the skin's surface and are responsive to stimuli coming from the outside or the body's surface. These receptors include those for vision, hearing, smell, and taste as well as those for touch, pain, and temperature.
Therefore, The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
To learn more about sensory receptors, refer to the link:
https://brainly.com/question/3190796
#SPJ2
Fossil fuels are made up of organisms that died millions of years ago. Which best describes this source of energy
What is the concentration of a 22.35 L solution that contains 9.95 moles of sodium
acetate? Round your answer to the correct number of significant figures.
Answer:
0.445 M
Explanation:
Molarity = moles/Volume
M = 9.95/22.35 = 0.445 M
Part A
Of the atoms below, ____
is the most electronegative.
- As
- Si
- P
- N
- C
Answer:
N
Explanation:
Electronegativity increases as you move from left to right across a period, and decreases as you move down the groups.
Answer:
N .. ........................
Which of this is formed when a metal reacts with steam ? *
Carbon dioxide
A Salt
An oxide
A metal hydroxide
What is the number of moles in 125ml of 0.25 M NaNO3solution?
Answer:
0.0313 mole.
Explanation:
From the question given above, the following data were obtained:
Volume of solution = 125 mL
Molarity of NaNO₃ = 0.25 M
Number of mole of NaNO₃ =?
Next, we shall convert 125 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
125 mL = 125 mL × 1 L / 1000 mL
125 mL = 0.125 L
Thus, 125 mL is equivalent to 0.125 L.
Finally, we shall determine the number of mole of NaNO₃ in the solution. This can be obtained as follow:
Volume of solution = 0.125 L.
Molarity of NaNO₃ = 0.25 M
Number of mole of NaNO₃ =?
Molarity = mole / Volume
0.25 = mole of NaNO₃ / 0.125
Cross multiply
Mole of NaNO₃ = 0.25 × 0.125
Mole of NaNO₃ = 0.0313 mole.
Convert 5.7 kcal to its value in calories.
Answer:
5700
Explanation:
How many moles are in 20.0g of lithium?
Answer:
I believe it is 5.00
Explanation:
Zinc metal reacts with copper sulfate through the following
reaction:
Zn + CuSO4 → Cu + ZnSO4
The percent yield for a reaction in which 32.5 g of Zn is reacted
in excess CuSO4 solution is 85.0 %. What is the actual yield of
copper of this reaction?
g
Answer:26.9
Explanation:
why do you think season will impact the size of a rabbit population
How does each structure of a sperm cell contribute to the sperm's function?
Calculate the pH of each of the following aqueous solutions. (Enter your answers to two decimal places.) (a) 10.0 mL deionized water WebAssign will check your answer for the correct number of significant figures. 2.72 Incorrect: Your answer is incorrect. (b) 10.0 mL deionized water plus 5.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures. (c) 10.0 mL deionized water plus 10.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures. (d) 10.0 mL deionized water plus 15.0 mL of 0.10 M NaOH WebAssign will check your answer for the correct number of significant figures.
Answer:
a. pH = 7.0
b. pH = 12.52
c. pH = 12.70
d. pH = 12.78
Explanation:
a. Deionized water has the [H⁺] of pure water = 1x10⁻⁷ (Kw = 1x10⁻¹⁴ = [H⁺][OH⁻] - [H⁺] = [OH⁻ -)
pH = -log[H⁺] = 7
b. Moles NaOH = 5x10⁻³L * (0.10mol / L) = 5x10⁻⁴moles OH⁻ / 0.015L = 0.0333M = [OH⁻]
-Total volume = 10mL+5mL = 15mL = 0.015L
pOH = -log[OH⁻] = 1.48
pH = 14-pOH
pH = 12.52
c. Moles NaOH = 0.010L * (0.10mol / L) = 1x10⁻³moles OH⁻ / 0.020L = 0.0500M = [OH⁻]
-Total volume = 10mL+10mL = 20mL = 0.020L
pOH = -log[OH⁻] = 1.30
pH = 14-pOH
pH = 12.70
d. Moles NaOH = 0.015L * (0.10mol / L) = 1.5x10⁻³moles OH⁻ / 0.025L = 0.060M = [OH⁻]
-Total volume = 10mL+15mL = 25mL = 0.025L
pOH = -log[OH⁻] = 1.22
pH = 14-pOH
pH = 12.78
identify the conjugate acid-base H20 (i) + CH3NH2(aq) —> OH-(ag)+ CH3NH3-(ag)
A. taste. B. turns. C. react. D. neutr. E. react. Which is t. A. OH. -. B. H2O ... acids are e conjugate. BANK] w.kau.edu.sa. ______ acid-base p a/aasiri2 1 ... Identify th. HCO. A. H2O. B. HCO. C. H2CO. D. PO4. 3. E. none. Identify th ... (aq) + HCN(aq) → H2O(aq) + CN. -. (aq). D. HCN(aq) + CH3NH2(aq) → CH3NH3. +. (aq)+ CN.
How many grams of a 26.9% sugar solution contain 49.0 g of sugar?
Answer:
182.156g
Explanation:
grams = 49/.269 = 182.156g needed
I have an unknown initial volume of gas
held at a temperature of 115 K in a
container with a pressure of 6 atm. I
increase the temperature to 225 K and
decrease the pressure to 2,800 mmHg
and it causes the final volume of the gas
to be 29 L. What was the initial
volume?
Answer:
V₁ = 0.025 Liters = 25 ml
Explanation:
P₁ = 6 Atm P₂ = 7800mm/760mm/Atm = 0.01 Atm
V₁ = ? V₂ = 29 Liters
T₁ = 115 K T₂ = 225 K
P₁V₁/T₁ = P₂V₂/T₂ => V₁ = P₂V₂T₁/P₁T₂
V₁ = (0.01 Atm)(29L)(115K)/(6 Atm)(225K) = 0.025 Liters = 25ml