The 10 cm Hg is not equivalent to 1 atm pressure.
This is equivalent to approximately 0.13 atm. It is a measure of pressure using the height of a column of mercury.
1 atm is defined as the average atmospheric pressure at sea level, which is the pressure exerted by a column of mercury (Hg) that is exactly 760 mm in height under standard gravity conditions. This measurement is commonly used in chemistry and physics.
Therefore, the statement "10 cm Hg is not equivalent to 1 atm pressure" is correct. 10 cm Hg corresponds to a pressure lower than 1 atm.
Know more about atmospheric pressure:
https://brainly.com/question/31634228
#SPJ12
The standard atmosphere (1 atm) is a unit of pressure defined as 101.325 kPa, 760 mm Hg, 14.7 psi, and 760 torr. Therefore, the option 10 cm Hg (option c) is not equivalent to 1 atm pressure.
Explanation:The question is asking which of the given values is not equivalent to a standard atmospheric pressure, or 1 atm. Standard atmospheric pressure, or 1 atm, is equivalent to several different measures depending on the unit system being used: 101.325 kPa, 760 mm Hg, 14.7 psi, and 760 torr.
Here, it's important to note that 1mm Hg is also known as 1 torr. Hence, c) 10 cm Hg is not equivalent to 1 atm pressure and is the correct answer.
Learn more about Atmospheric Pressure here:https://brainly.com/question/34803534
#SPJ12
What is the empirical formula of a hypothetical compound that is 96%s and 4% h? you can do this problem easily in your head or with a piece of scratch paper.
The empiric formula to that compound is S₃H₄. Empirical formula is the proportion of the element that is available in a compound.
How to find the emperical formula of that compound?To find the formula for that compound, we have to know the mole ration of its atoms. As per given data only mass of s = 96% and h = 4%. We have to assume mass of the compound as x. Then calculate the ratio as follow:
S mole value : H mole value = (96x : 32.07) : (4x : 1.008)
S mole value : H mole value = 3x : 4x
Let divide the ratio with x
S mole value : H mole value = 3 : 4
After we get the ration, make the empiric formula based on it where the result:
S(mole value)H(mole value) = S₃H₄
Learn more about empiric formula here
https://brainly.com/question/1603500
#SPJ4
Select the correct K expression for the following reaction: 3 A(aq) + B(s) = 2 Claq) + D(aq)
a. K = 2[C][D] / 3[A]
b. K = [C]^2[D] / [A]^3[B]
c. K =[A]^3 / [C]^2[D]
d. K = [C]^2[D] / [A]^3
Option (d) is correct. According to the Equilibrium expression, the product raised to its stoichiometric coefficient divided by same of reactant.
The term equilibrium constant expresses the relationship between products and reactants of a reaction at equilibrium. It shows with respect to a specific unit. Equilibrium constant can be expressed as K. It is the ratio of velocity constant of forward reaction to velocity constant of backward reaction. It is also defined as the ratio of product to molar concentration of product to the product of molar concentration of reactants.
K = [C]2 [D] / [A]3 [B]
Now for solids its value is 1. For a heterogeneous mixture, solids and pure liquids and solvents have an activity that has a fixed value of 1.
So, K = [C]2 [D] / [A]3
To learn more about Equilibrium constant please visit:
https://brainly.com/question/3159758
#SPJ4
The air pressure at the top of Mount
Everest is about 199 mm Hg.
What is the pressure on Everest in
atmospheres?
[?] atm
Answer:
[tex]\huge\boxed{\sf 0.26 \ atm}[/tex]
Explanation:
Given that,
Atmospheric pressure = 199 mm Hg
To convert mm Hg to atm, we divide by 760.So,
Pressure = 199/760 atm
Pressure = 0.26 atm[tex]\rule[225]{225}{2}[/tex]
Instant hot and cold packs are found in many common stores and work when two substances react. Depending on the substances that react, the reaction either absorbs heat or gives off heat. The enthalpy of a hot pack is because the reaction.
Instant hot and cold packs are found in many common stores and work when two substances react. Depending on the substances that react, the reaction either absorbs heat or gives off heat. The enthalpy of a hot pack is negative because the reaction gives off heat. If The enthalpy of a hot pack is positive because the reaction absorbs heat.
Define enthalpy?A thermodynamic system's internal energy and the product of its pressure and volume are added to form enthalpy, which is one of the system's properties. It is a state function that is frequently used to monitor chemical, biological, and physical systems at a constant pressure that is conveniently given by the sizable surrounding environment.In a thermodynamic system with constant pressure, the total amount of heat is measured in terms of enthalpy. It is shown to be. H is equal to E + P + V, where E denotes internal energy, P denotes pressure, and E denotes energy. In a thermodynamic system, entropy represents the degree of chaos.The measurement of energy in a thermodynamic system is called enthalpy.To learn more about enthalpy refer to:
https://brainly.com/question/1533869
#SPJ4
Alkaline (cold) perms(stronger)
What’s the approximate pH level?
What’s the main ingredient?
Is there a longer or shorter processing time?
The scale contains values from 0, which is the most acidic, to 14, which is an agricultural product that, though not always by weight majority, is the distinguishing or unique element in a cottage food product.
What differentiates one cuisine from another?A cuisine is a type of food distinguished by unique materials, preparation methods, and meals, and it is frequently related to a particular culture or geographical area. Dishes that are specific to a place are made possible by regional food preparation methods, customs, and ingredients.
Why is it vital to be aware of the many types of ingredients?To assess if a food product is a good decision or not, the ingredient list is the best resource you have at your disposal. In actuality, there is no other way to tell if a product is derived from actual food or if it also contains additives, added sugars, and vegetable oils.
To know more about distinctive ingredient visit:
https://brainly.com/question/30141107
#SPJ4
Rosa was looking for patterns to help predict the products of chemical reactions. She recorded three similar decomposition reactions in the table. What products should she record in the last row of the table? 2licl + 3o2 3licl + 2o2 2lio + 3cl2 3lio+ 2cl2.
The products Rosa recorded in the last row of the table should be: 2LiCl + 3O₂.
The type of reaction which Rosa did is a decomposition reaction which involves one compound that yields to more than one (or usually two) product. To determine the product, we can deduce that it has to contain elements of Li, Cl and O₂. So, from the options, the answer is 2LiCl + 3O₂.
What is a decomposition reaction?A decomposition reaction can be described as a chemical reaction in which one reactant breaks down into two or more products. Generally, decomposition reactions need energy input.
Learn more about decomposition reaction at: https://brainly.com/question/16987748
#SPJ4
How is our modern understanding of atomic structure different from thomson plum pudding model?
The negatively charged electron in the plum pudding model, however, is smaller than an atom and is negatively charged.
How does the nuclear model of the Rutherford scattering experiment compare to the plum pudding model?Electrons with a negative charge were encased in a positive charge, or "soup," in Thomson's plum pudding atom model. Rutherford's experiment with gold foil demonstrated that the majority of an atom is made up of empty space, with a small, compact, positively-charged nucleus. Rutherford put forth the nuclear model of the atom in response to these findings.The atom is the lowest unit of matter according to the hard-sphere atom model, which is why the plum pudding atom model is distinct. The negatively charged electron in the plum pudding model, however, is smaller than an atom and is negatively charged.To learn more about plum pudding model refer to:
https://brainly.com/question/4839193
#SPJ4
1. Define acids and bases in terms of their chemical properties2. Compare and contrast the common properties of acids and bases.
Answer: Acids are chemical substances which are characterized by a sour taste in water medium. Bases are the chemical substances which are characterized by a bitter taste and are slippery to touch.
Explanation:
Acids have tendency to turn blue litmus to red. Some bases are soluble in water, while others are not. Water soluble bases are known as alkalis. They have tendency to turn red litmus to blue.
Acids and bases react with a wide range of chemical compounds to form salts.
Chemical properties of the following:
Reaction of acids and bases with metals. When a metal reacts with an acid, it generally displaces hydrogen from the acids. This leads to the evolution of hydrogen gas. The metals combine with the remaining part of acids to form a salt. Alkalis (bases that are soluble in water) react with metals to produce salt and hydrogen gas.
For example, the reaction of sulphuric acid with zinc.
H₂SO₄ ⁺ ZN ⇒ ZnSO₄ ⁺ H₂
For example, reaction of zinc with sodium hydroxide.
NaOH ⁺ Zn ⇒ Na₂ZnO₂ ⁺ H₂
To know more about acid and base,
https://brainly.com/question/30224411
Which reaction would not occur as written due to the Activity Series of Metals (found in your Chemistry Reference Table)?
A. 3 Mg + 2 AlCl3 --> 3 MgCl2 + 2 Al
B. Al + NaCl --> AlCl3 + Na
C. Ca + CuCl2 --> CaCl2 + Cu
D. 2 K + 2 H2O --> 2 KOH + H2
A. 3 Mg + 2 AlCl3 --> 3 MgCl2 + 2 Al would not occur as written due to the Activity Series of Metals
Which metal is least active in the Activity Series of Metals ?The Activity Series of Metals is a list of metals in order of decreasing reactivity. The most reactive metals are at the top of the list and the least reactive metals are at the bottom. The metal that is considered the least active in the Activity Series of Metals is gold. Gold is a very unreactive metal, meaning that it does not easily form compounds with other elements or react with other substances. This is why gold is often used in jewelry and other decorative items, as it does not tarnish or corrode easily. Other metals that are considered to be relatively unreactive and are also located towards the bottom of the activity series include platinum and silver.
It is worth noting that the activity series of metals is not a definitive and absolute list. It is based on a specific set of conditions, such as the presence of a certain solvent or the concentration of certain ions, and the activity of the metals may change in different environments.
Additionally, the activity series can be useful to predict the outcome of displacement reactions, in which a more active metal can displace a less active metal from a compound. For example, zinc, a more active metal than copper, can displace copper ions from a copper sulfate solution to form zinc sulfate and copper metal.
To know more about Metals visit: https://brainly.com/question/18153051
#SPJ1
How did the visigoths and Ostrogoths maintain a Roman style government
The First Germanic War and the crucial Battle of Anzio (378 CE), in which the Goths led by Fritigern overthrew Rome due to their oppression at the feet of Romans provincial rulers, were sparked
What is meant by provincial thinking?adjective. When you refer to someone or anything as provincial, you are expressing your disapproval of them because you find them to be monotonous and out of date. [disapproval] He made the choice to update the organization's rural image. Synonyms include local, exclusive, simpleminded, and uncultured More the opposites of provincial.
What does a provincial life entail?a member of or associated with a province. 2 pertaining to, or associated with, the provinces; regional. possessing beliefs and attitudes that are thought to be typical of country dwellers; simple or undeveloped; constrained.
To know more about provincial visit:
https://brainly.com/question/13428382
#SPJ1
what is the percentage mass of oxygen in barium phosphate?
Which of the following characteristics of halogens is not
correct?
Their ionization energy decreases as atomic
a numbers increase
b
Their electronegativity decreases as atomic
numbers increase
с
Their electron affinity decreases as atomic
numbers increase
d None of the above
Answer: The correct answer is d - None of the Above.
Explanation: Halogens have increasing electron affinity as their atomic numbers increase, while their ionization energy and electronegativity both decrease as atomic numbers increase.
which pictogram is not mandatory for chemical labels and sds?
Explosive (Symbol: exploding bomb)
Flammable (Symbol: flame)
Oxidising (Symbol: flame over circle)
Corrosive (Symbol: corrosion)
Acute toxicity (Symbol: skull and crossbones)
Hazardous to the environment (Symbol: environment)
Health hazard/Hazardous to the ozone layer (Symbol: exclamation mark)
Serious health hazard (Symbol: health hazard)
Gas under pressure (Symbol: gas cylinder)
SDS’s are not denote for consumers. An SDS affects the hazards of working with the material in an occupational fashion.
For example, an SDS for paint is not highly relevant to someone who uses a can of paint once a year but is extremely important to someone who uses that paint 40 hours a week or per day 5-6 hours.
A safety data sheet (SDS), first known as a material safety data sheet) is an important information source for eliminating or minimizing the risks linked with the use of hazardous chemicals (hazardous substances and/or dangerous goods) in workplaces.
While the GHS uses a total of 9 pictograms, OSHA will only impose the use of eight.
The environmental pictogram is not compulsory but may be used to provide additional information.
To know more about Pictograms:
https://brainly.com/question/29898314
#SPJ4
_Ag₂NO₂ Cu → Cu(NO3)2 +_ Ag
what kind of replacement is it single or double or synthesis/combination combustion or decomposition
This is Single displacement reaction as copper is displacing silver from silver nitrate
What is Single-Displacement reaction?A single replacement reaction, also known as a single displacement reaction, occurs when one element in a molecule is swapped out for another. Starting ingredients are always pure elements combined with an aqueous compound, such as pure hydrogen gas or zinc metal. A new aqueous compound and a different pure element will be produced as products when a replacement reaction occurs.
Cu(s) + 2AgNo3(aq) → 2Ag(s) + Cu(NO3)2(aq)
What is a Displacement Reaction?When an atom or group of atoms in a molecule are replaced by another atom, this is referred to as a displacement reaction. For instance, copper metal is displaced when iron is added to a solution of copper sulphate.
A + B-C → A-C + B
The above equation exists when A is more reactive than B.
A and B have to be either:
Halogens where C indicates a cation.
Different metals wherein C indicates an anion.
Different kinds of single replacement reactions
The reactivity series identifies three primary categories of single replacement reactions:
Metal replacement refers to the displacement of one metal by another. When a metal displaces hydrogen gas, Hydrogen replacement is a process known as were an hydrogen replacement occurs. When a halogen engages in displacement, it is called halogen replacement.To know more about Single-Displacement reaction refer to :
https://brainly.com/question/16396033
#SPJ1
What is the formula for speed?
Answer:
distance/time is the answer
1. How many atoms would make 7.31 moles of potassium?
The number of atoms that would make 7.31 moles of potassium is 4.40 × 10²⁴ atoms.
How to calculate number of atoms?The number of atoms in a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number as follows:
According to this question, there are 7.31 moles of pottasium. The number of atoms can be calculated as follows:
no of atoms = 7.31 moles × 6.02 × 10²³
no of atoms = 4.40 × 10²⁴
Therefore, 4.40 × 10²⁴ atoms is the number of atoms in pottasium.
Learn more about number of atoms at: https://brainly.com/question/14190064
#SPJ1
Chemit heated a olid red ubtance in a tube, the ubtance made a metallic liquid and a ga, which tatement bet decribe what happened to the red ubtance?
This is based on the process of chemical decomposition due to which experiment shows the red substance.
Compounds with an oxygen–oxygen single bond are categorised as peroxides. Hydrogen peroxide represents the simplest type of this group of chemicals.
It is characterized by its tendency to decompose, caused by the nature of its unstable peroxide bond. It must be stored with a stabilizer, such as acetanilide or similar organic materials.
The solution is not flammable, regardless of its concentration. However, hydrogen peroxide is a strong oxidizing agent, due to its chemical structure and unpaired electrons.
To know more about chemical decomposition here
https://brainly.com/question/27300160
#SPJ4
is aluminum foil a heterogeneous or homogeneous mixture?
Answer:
Aluminum foil would be considered homogeneous mixture.
Aluminium foil is a homogeneous mixture rather than heterogeneous mixture which has more than 1 phase.
What are heterogeneous mixtures?Heterogenous mixtures is defined as a type of mixture where the composition is not uniform throughout the mixture.It consists as two or more phases. The phases are chemically distinct from each other.
As there are two or more phases present in heterogenous mixtures they can be separated by solvent extraction where in one phase is miscible with the solvent and the other phase is immiscible.
Components of a heterogenous mixtures are distinctly visible . There are two types of heterogenous mixtures, the colloids and the suspensions.These two can vary with each other with respect to particle size.They are easily separated from each other.
Learn more about heterogeneous mixtures,here:
https://brainly.com/question/29207752
#SPJ2
Which of the following represents the second ionisation
energy of boron?
A B(g) → B²*(g) + 2e AH = + 2427 kJ mol-¹
B B*(g) → B²*(g) + e AH = + 2427 kJ mol-¹
C B(g) → B²(g) + 2e AH = -2427 kJ mot¹
D B*(g) → B²+ (g) + e AH = -2427 kJ mol-¹
E
How would you measure 20 grams of salt?
20 grams of salt can be accurately weighed using an electronic balance. For measuring, we can use s filter paper or other thin sheets to take the salt.
What is an electronic balance ?An electronic balance is a used to weigh substances. Solid as well as liquids substances can be accurately weighed using an electronic balance. It is more accurate and easy to use in comparison with with the conventional balances.
Powder samples can be easily weighed out using electronic balances. First we have to tier the weight of the container or the paper on which the substance to be weighed is taken.
20 g of salt can be easily measured out using an electronic balance. Using this device we can take measurements with two or four decimal places as well.
Find more on electronic balance:
https://brainly.com/question/24525668
#SPJ1
We’re are earths outer layer made of solid hard rock
compound words are usually composed in the following order: combining form + word root + suffix.
Which type of soil can hold absorb more water and why?
Clayey soil can absorb more water due to its comparatively large pore size and ability to hold the water molecules.
Soil is composed of components such as minerals, gas, water and organic matter. It is divided into three components viz. sand, silt and clay.
The ability of a soil to absorb water depends upon its pore size. In clayey soil, it has relatively large pore size so the water molecules can be easily absorbed and stored in the pores unlike sandy soil.
Clay particles have cohesive force between them which helps to hold water molecules together, whereas this cohesive force is absent in sandy soil.
To know more about types of soil here
https://brainly.in/question/45238376
#SPJ4
Calculate the volume of gas, in L, occupied by 1.74 moles of SF6 (g) at 273 K and 1 atm
The volume of gas is 3,949.31 litre, occupied by 1.74 moles of SF6 (g) at 273 K and 1 atm.
What is an ideal gas law ?The ideal gas law is also called as perfect gas law. It is the relation between the pressure P, volume V, and temperature T of a gas.
Given:
Volume of gas = ?
Number of moles (n) = 1.74 moles
Temperature (T) = 273K
Pressure (P) = 1 atm
R (gas constant) = 8.314
By an ideal gas equation
PV = nRT
By putting above value in ideal gas equation, we get
1 × V = 1.74 × 8.314 × 273
V = 3,949.31 litre
Thus, The volume of gas, in L is 3,949.31 litre, occupied by 1.74 moles of SF6 (g) at 273 K and 1 atm.
To learn more about an ideal gas law, follow the link;
https://brainly.com/question/4147359
#SPJ1
what is mass composition of compounds?
Mass percent composition is calculated by comparing the molar mass of an element in a compound to the total molar mass of the entire compound.
9.0 mol Na2S reacts with 8.0 mol
CuSO4 according to the equation below:
Na2S + CuSO4
→
Na2SO4 + CuS
Considering only the 8.0 mol CuSO4,
how many moles of CuS form?
? mol CuS
Based on the mole ratio of the given chemical reaction, 8 moles of CuS are produced.
What is the mole ratio of the given equation?The mole ratio of an equation is the ratio in which the reactants in a given chemical reaction react with themselves to form products.
Both reactants and the products are present in a given mole ratio as given by the equation of the reaction.
The mole ratio of the given equation of reaction is obtained from the equation of the reaction as follows:
Na₂S + CuSO₄ → Na₂SO₄ + CuS
The mole ratio of CuSO₄ toCuS is 1 : 1
Hence, 8 moles of CuS are produced.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
What is an example of situational irony in the excerpt the open window?
The example of situational irony is “She rattled on cheerfully about the shooting and the scarcity of birds, and the prospects for duck in the winter. To Framton it was all purely horrible."
A situational irony is a literary device.
Situational irony refers to when an assumption is directly contrasted by an event that happens. It means when something opposite happens to what was being expected.
Saki uses situational irony to create humor in "The Open Window".
The character of Vera spins such an amazing tale of dead people and ghosts that Mr. Nuttel and the reader get captured in it and it is later revealed to be false and just a past time of Vera spinning tales.
To look more about situational irony click here
brainly.com/question/29619415
#SPJ4
Explain how migration can be used by scientists to predict the trends in the size of the human population.
The way migration can be used by scientists to predict the trends in the size of the human population because Population growth occurs when immigration rates are higher than emigration rates; the opposite occurs when emigration rates are higher than immigration rates.
How do migration patterns play in population trends?The rate of natural rise and the results of migration make up the rate of population expansion. As a result, a high rate of natural increase can be balanced by a high level of net in-migration, and a low rate of natural increase can be.
Migration will slow down aging in wealthy areas while speeding it up in underdeveloped ones. Most nations and regions that are seeing population declines do so primarily as a result of natural change (the distinction
Learn more about Migration at:
https://brainly.com/question/18259786
#SPJ1
This chemical equation is balanced.
2Na+ 2H₂O → 2NaOH + H₂
How does this equation show the conservation of matter in a chemical
reaction?
OA. The reactants and products are substances that each have equal
numbers of atoms.
OB. The reactants and products have the same kinds of atoms and
equal numbers of each kind.
OC. The number of substances in the reactants is equal to the number
of substances in the products.
OD. The coefficients and subscripts in the reactants are the same as in
the products.
This chemical equation is balanced. 2Na+ 2H₂O → 2NaOH + H₂ this equation show the conservation of matter in a chemical reaction by the number of substances in the reactants is equal to the number of substances in the products. Therefore, option C is correct.
What is the conservation of matter ?The law of conservation of matter states that the same amount of matter exists before and after the change of reaction, none is created or destroyed in the reaction.
According to the law of conservation of mass, the total mass of the products in a chemical reaction is exactly equal to the total mass of the reactants.
Thus, option C is correct.
To learn more about the conservation of matter, follow the link;
https://brainly.com/question/11573747
#SPJ1
An umbrella i placed in a drink holding a volume of punch equal to 7ML. The height of the punch roe to 10 ML. If the ma of the umbrella wa 27G, what wa it denity?
An umbrella is placed in a drink holding a volume of punch equal to 7 mL. The height of the punch rose to 10 mL. If the mass of the umbrella was 27 g, the Density of the umbrella is 9 g/mL.
Given that :
The mass of the umbrella = 27 g
The volume of the umbrella :
= height of the punch rose - volume of the punch
= 10 mL - 7 mL
= 3 mL
The density of the umbrella is give as :
Density = mass / volume
Density = 27 g / 3 mL
Density = 9 g/mL
Thus, the density of the umbrella is 9 g/mL.
To learn more about density here
https://brainly.com/question/29775886
#SPJ4