Which of these statements about density is NOT true? a The density of a block of substance A equals 10.0 g/cm3. If I cut the block in half, its density will equal 10.0 g/cm3. b A cubic meter of bricks is more dense than a cubic meter of feathers. c It is possible to identify a substance by its density. d The density of a substance is always the same, regardless of temperature.

Answer:

Mass of Cr= 78 g

Explanation:

Given data:

Specific heat of Cr = 0.448 j/g.°C

Initial  temperature of Cr lump = 89.5°C

Mass of water = 75.2 mL or 75.2 g

Initial temperature of water = 20.5°C

Final temperature of water = 27.4°C

Mass of Cr = ?

Solution:

when we placed the lump of Cr metal into water heat lost by limp is equal to the heat gain by water.

Specific heat capacity of water is 4.184 j/g.°C

Q = mcΔT

Q = 75.2 g× 4.184 j/g.°C × (27.4°C - 20.5°C)

Q = 2171 J

Heat lost by Cr lump is -2171 J. Now we will calculate the mass of Cr.

Q = mcΔT

-2171 J = m ×0.448 j/g.°C × ( 27.4°C- 89.5°C)

-2171 J = m × -27.821 j/g

m = -2171 J/-27.821 j/g

m = 78 g

Answer:

C. Pesticides protect our crops, but some European countries have

linked them to thyroid disorders.

Explanation:

Researches involving human or sometimes animals are subject to critical decision making.

They can easily trespass on the fundamental rights of people and some other issues.

Answer:

Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon.

Explanation:

Answer:

Explanation: Chlorofluorocarbons and hydrochlorofluorocarbons are fully or partly halogenated paraffin hydrocarbons that contain only carbon, hydrogen, chlorine, and fluorine, produced as volatile derivative of methane, ethane, and propane. They are also commonly known by the DuPont brand name Freon

The ground state configuration : 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹

Electrons can move the shell up or down by releasing energy or absorbing energy  

It can be concluded that there are 2 conditions:  

Ground-state is the state of electrons filling the shell with the lowest energy levels.  

Excited-state is the state of electrons which occupies a higher energy level  

The state of excited electrons can be seen from the presence of electrons which do not fill the shell completely but fill the shell afterward  

Gallium (Ga) is a metal located in group 13, p-block and  period 4

Atomic number : 31

If we look at the options:

options 1,2 and 3 do not conform to Aufbau principle(Electrons occupy orbitals of the lowest energy level  ), because 3d orbitals do not exist and the number of electrons is also not 31

So that the most appropriate electron configuration is:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹ = 31 electrons

or we can write : [Ar] 4s² 3d¹⁰ 4p¹

Answer:

Which observation provided Albert Einstein the clue that he needed to explain the photoelectric effect? Energy of electrons depends on light's frequency, not intensity. A change in which property of light will have no effect on whether or not the photoelectric effect occurs?

Explanation:

The characterization of the following statements with respect to intensive or extensive is as follows:

Extensive may be defined as terminology that illustrates any event or action which is extremely large and significantly found at the outer level of any referring details. For example, the shipping cost of a book (depends on weight) is mentioned outside the cover of the book.

Intensive may also be characterized as a scientific terminology that significantly deals with any object or details which is present inside the content. For example, the number of pages in a book is mentioned inside the book.

Therefore, the characterization of the following statements with respect to intensive or extensive is appropriately described above.

To learn more about Extensive and intensive, refer to the link:

https://brainly.com/question/17594097

#SPJ2

Answer:

b

Explanation:

Answer:

Disagree, the total mass is 245 grams.

Explanation:

We need to keep in mind the Law of Conservation of Mass. Each gram added to the lemonade (a system) will remain there unless it is somehow removed. The added mass of both sugar and lemon count for the total mass (210+20+15), even if the sugar was dissolved.

Answer:

C

Explanation:

If you move the decimal to the left it transforms the expression into scientific notation.

Answer:

it is 75 degrees

Explanation:

Volume is 138.7 mL.

The equation for calculation of volume is as follows:-

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

STP:-

Temperature=273 K

Pressure=1 atm

[tex]\frac{1 atm\times250mL}{273 K} =\frac{2 atm\times V_2}{303\ K}\\V_2=138.7\ mL[/tex]

Hence, the volume is 138.7 mL.

To know more about:-

https://brainly.com/question/15988929

Explanation:

Biological in the ocean is affected by the water cycle via the Mixed Layer Depth and Run off from land. Salinity and temperature determine the density of ocean water, and density influences the circulation. E-P determines surface salinity of the ocean, which helps determine the stability of the water column.

Answer:

cytoplasm

Explanation:

cytoplasm carries the nutrients of the cell

Answer:

Iodine

Explanation:

I hope this answer will help you

Answer:

silicon. ?

Explanation:

lmk if its right.

Answer:

mirar respuesta abajo

Explanation:

Muy bien. Antes de responder lo que piden en el problema, vamos a calcular la concentración inicial de la solución A:

1) Concentración de la solución A:

En este caso, se sabe que se usaron 3,5 g de la sal, se puede calcular los moles usando el peso molecular y la masa:

n = m/PM  (1)

Aplicando tenemos:

n = 3,5 / 98 = 0,0357 moles

Conociendo los moles, podemos calcular la concentración:

M = n/V (2)

Aplicando la formula tenemos:

M = 0.0357 / 0.200 = 0.1785 M

Esta es la concentración del ácido etiquetado como "Solución A".

Ahora podemos ver la concentración de la solución B, para luego calcular las concentraciones molares de los iones en solución y sus respectivos pH.

2) Concentración del ácido en la solución B:

Con la concentración de "A", se puede determinar la concentración de la solución B. Aqui podemos esperar que sea un valor mas bajo, puesto que es una dilución la que estamos haciendo. Por lo tanto.

Si se toma 5.5 mL de la solución A, entonces:

n = 0.1785 * 0.0055 = 0.00098 moles

Con esto, se calcula la nueva concentración:

M = 0.00098 / 0.070 = 0.014 M

Esta es la concentración de la solución B. Ahora para calcular pH y concentraciones de los iones en equilibrio, hay que plantear la reacción acido base en equilibrio. Como es el mismo compuesto, usaremos la misma ecuación.

3) pH de las soluciones A y B:

Planteamos la reacción de equilibrio:

CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻     Kb

Calculando el Kb, sería asi:

Kb = Kw/Ka

Kb = 1x10⁻¹⁴ / 1.8x10⁻⁵ = 5.56x10⁻¹⁰

Ahora reescribimos la ecuación y hacemos una tabla de equilibrio:

       CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻     Kb = 5.56x10⁻¹⁰

i)        0.1785                                    x              x

eq)    0.1785-x                                  x              x

Kb = [OH⁻] [CH₃COOH] / [CH₃COO⁻]

Reemplazando nos queda:

5.56 * 10⁻¹⁰ = x² / (0.1785-x)      

Y como Kb es muy pequeño, se asume que el valor de x será también pequeño, asi que podemos redondear la resta a simplemente 0.1785, quedando tan solo:

5.56 * 10⁻¹⁰ = x² / (0.1785)

x² = 5.56*10⁻¹⁰ * 0.1785

x = √9.9246*10⁻¹¹

x = 9.96*10⁻⁶ M

Esta es la concentración de [OH⁻] y [CH₃COO⁻] en la solución A.

Aplicando lo mismo para la solución B (Cambiando solo el dato de concentración) nos queda:

x = √5.56*10⁻¹⁰ * 0.014

Finalmente, para calcular pH, se calcula primero el pOH y luego el pH:

pH = 14 - pOH

pOH = -log[OH⁻]

Para la solución A:

pOH = -log(9.96*10⁻⁶) = 5

pH = 14 - 5

En el caso de la solución B:

pOH = -log(2.79*10⁻⁶) = 5.55

pH = 14 - 5.55

Espero te ayude

Answer:

Explanation:

The kinetic energy of a body can be found by using the formula

[tex]KE = \frac{1}{2} m {v}^{2} \\ [/tex]

where

m is the mass

v is the velocity

From the question

m = 100 kg

v = 3 m/s

We have

[tex]KE = \frac{1}{2} \times 100 \times {3}^{2} \\ = 50 \times 9[/tex]

We have the final answer as

Hope this helps you

Answer:

The rock on the right is foliated

Explanation:

I took the test

Answer:

110.21 g/mol

............................

Answer:

110.22 g in 2.75 moles of calcium

Explanation:

to convert moles to grams

moles (g/mol)

2.75 mol Ca (40.08 (atomic weight) g Ca/1 mol Ca)= 110.22

Answer: 49

Explanation: Mass number is protons + neutrons. So that would be 22 + 27 which gives you 49

Answer:

Mass of CsXeF₇  = 99.3 g

Explanation:

Given data:

Mass of CsF = 37.8 g

Mass of CsXeF₇ produced = ?

Solution:

Balance chemical equation:

CsF + XeF₆   →    CsXeF₇

Number of moles of CsF:

Number of moles = mass/molar mass

Number of moles = 37.8 g/ 152 g/mol

Number of moles = 0.25 mol

Now we will compare the moles of CsF with CsXeF₇  from balance chemical equation:      

                   CsF             :         CsXeF₇

                    1                 :             1

                 0.25             :           0.25

Mass of CsXeF₇ :

Mass = number of moles × molar mass

Number of moles = 0.25 mol × 397.2 g/mol

Mass = 99.3 g

Answer:

98.84

Explanation:

Answer:

Ca and Ba

Explanation:

Mainly because both Ca and Ba are able to form ionic bonds also both Ba and Ca are earth, in that case they have similar characteristics

Answer

Calculating the mass number for an atom requires that we know the atomic number and the number of protons in the atom’s nucleus. The mass number then gives us the average weight of atoms of a given element. However, as long as the number of protons equals the number of neutrons, the values balance out and we always obtain a whole number for the mass number.

Explanation:

those 3

Answer:

Biogas is a type of biofuel that is naturally produced from the decomposition of organic waste. When organic matter, such as food scraps and animal waste, break down in an anaerobic environment (an environment absent of oxygen) they release a blend of gases, primarily methane and carbon dioxide.

Explanation:

Biomass is renewable organic material that comes from plants and animals. ... Biomass contains stored chemical energy from the sun. Plants produce biomass through photosynthesis. Biomass can be burned directly for heat or converted to renewable liquid and gaseous fuels through various processes.biodigester is like a mechanical stomach. It is fed with organic material, which is broken down (decomposed) by micro-organisms (bacteria) is an oxygen-free (anaerobic) environment to produce a renewable energy called biogas (methane and carbon dioxide) and other material that is mainly used as fertilizer.

Explanation:

Biogas is a type of biofuel that is naturally produced from the decomposition of organic waste.

Biomass is plant or animal material used for energy production, or in various industrial processes as raw substance for a range of products.

A Biodigester simply means a tank which digests organic material biologically. In this sense, the FilterPod is a biodigester. However, many people think of a biodigester as a tank which digests, anaerobically, without air, organic material and produces methane gas for cooking, lighting and heating ect.

Answer:

Mitochondria - energy production in plant and animal tissue

Explanation:

The mitochondria is the power house of a cell. it contains adenosine-tri- phosphate or ATP molecules that produce energy through active transport. The mitochondria is responsible for energy production in both plant and animal cells

Answer:

it is b because its releases heat in to all directions and not b because it staying inside and not releasing anything :)

Explanation:

Answer:

In ice cube heat is taken in absorbed it's an endothermic reaction

In fire heat is given out it is an exothermic reaction

Explanation:

Wanna give you one advice

Exit of heat means exothermic and you can memorize it by

The first word of both word exit ;exo

Hope it helps you

Answer:

there would be no effect

Explanation:

Answer:

Explanation:

Convert mass in gms .. 987 gms

Density = mass/ volume

= 987/4.52 x102

= 2.18 g/mL

Answer:

The valence shell (the 3s and 3p sublevels) contains six electrons, but it needs eight to become stable. Think of the octet rule. Therefore a sulfur atom will gain two electrons to form the sulfide anion with a charge of 2− , with the symbol S2− .

Answer:

C: amount of mass in a certain volume

Explanation:

Just took the quiz and got 100%