Which one of the following compounds is a non-electrolyte when dissolved in water?
Cu(NO3)2
CaCl2
HCl
NaCH3CO2
CCl4

Answer:
The empirical formula for C₄H₁₀0₆ is CH₂O
The empirical formula for Al(SO₃)1.5 is Al₂(SO₄)3
The empirical formula for CH₃ is already given.
The empirical formula for Fe(NO₃)3 is already given.

Explanation: Empirical formula is the simplest formula that gives the simplest whole number ratio of atoms in a compound.

To get the empirical formula, the given formula must be reduced to its simplest whole-number ratio. For this, divide each subscript by the largest common factor.

Hence, the empirical formulae for the given formulas are,

The empirical formula for C₄H₁₀0₆ is CH₂O
The empirical formula for Al(SO₃)1.5 is Al₂(SO₄)3
The empirical formula for CH₃ is already given.
The empirical formula for Fe(NO₃)3 is already given.

Learn more about empirical formulas here:

https://brainly.com/question/1439914

#SPJ11

The volume difference between the total volume of water and ethanol that were mixed to prepare the solution and the actual volume of the solution is 538.56 ml.

To calculate the volume difference, we need to first calculate the total volume of the solution and the volume of each component in the solution.

The total volume of the solution is the sum of the volumes of ethanol and water:

Total volume = volume of ethanol + volume of water

Total volume = 736.0 ml + 694.0 ml

Total volume = 1430.0 ml

To calculate the volume of ethanol in the solution, we need to convert the mass of ethanol to volume using its density:

Mass of ethanol = volume of ethanol x density of ethanol

Volume of ethanol = mass of ethanol / density of ethanol

Volume of ethanol = (9.186 mol/L) x (0.7893 g/ml) x (736.0 ml) / (46.07 g/mol)

Volume of ethanol = 197.44 ml

Similarly, we can calculate the volume of water in the solution:

Volume of water = 694.0 ml

Therefore, the actual volume of the solution is the sum of the volumes of ethanol and water:

Actual volume of solution = volume of ethanol + volume of water

Actual volume of solution = 197.44 ml + 694.0 ml

Actual volume of solution = 891.44 ml

The volume difference is the difference between the total volume of ethanol and water that were mixed and the actual volume of the solution:

Volume difference = Total volume - Actual volume of solution

Volume difference = 1430.0 ml - 891.44 ml

Volume difference = 538.56 ml

Learn more about volume difference here: https://brainly.com/question/21305745

#SPJ1

The type of atomic orbital that can be described as having 2 lobes of electron density separated by a nodal plane is the P orbital.

In atomic theory, an atomic orbital is a mathematical function that describes the behavior of one electron in an atom. It is a region in space with a high probability of locating an electron.

There are 3 types of orbitals available in each sub-shell of an atom. The sub-shell in each shell can be used to predict the number of orbitals.

There are 1 s-orbital, 3 p-orbitals, 5 d-orbitals, and 7 f-orbitals available in the first, second, and third shells, respectively. The type of atomic orbital that can be described as having 2 lobes of electron density separated by a nodal plane is the P orbital.

Each P orbital has two lobes of electrons located on either side of the nucleus separated by a nodal plane. The lobes can be polarized, making them more or less prominent depending on the situation.

This configuration provides the P orbital with a unique geometry and makes it highly suitable for molecular bonding.

The P orbital has a total of three different orientations. Each orientation corresponds to a different direction in space in which the lobes can be located. The three orientations are Px, Py, and Pz.

Each P orbital can hold a maximum of 2 electrons.

To know more about atomic orbitals, refer here:

https://brainly.com/question/28240666#

#SPJ11

The correct order of species based on their ability to act as an oxidizing agent is Au3+ > Fe2+ > Ni2+ > Na+.

The ability to act as an oxidizing agent varies among different species. In the given set of species, the order of their ability to act as an oxidizing agent from the best to the poorest is as follows:

Au3+ > Fe2+ > Ni2+ > Na+

Au3+ is the best oxidizing agent as it has the maximum tendency to accept electrons and undergo reduction.

Fe2+ is a better oxidizing agent than Ni2+ and Na+ because it can accept two electrons easily and undergoes reduction. Ni2+ is a weaker oxidizing agent than Fe2+ and Na+ as it can only accept electrons and undergoes reduction. Na+ is the poorest oxidizing agent as it has the least tendency to accept electrons and undergo reduction. It is the best reducing agent as it readily donates an electron to become Na.

For more such questions on oxidizing agent, click on:

https://brainly.com/question/14041413

#SPJ11

62.297 kJ of heat is required  to boil 132.g of water (H20), beginning from a temperature of 7.4 °C.

The quantity of heat required to boil 132 g of water at a temperature of 7.4°C is to be calculated. The heat energy required to increase the temperature of a material by one degree Celsius is referred to as heat capacity or specific heat. The formula for specific heat capacity is given by Q = mCΔT where Q is the quantity of heat, m is the mass of the material, C is the specific heat capacity of the material, and ΔT is the difference in temperature.

We'll utilise the following formula to calculate the heat required:q = m x c x ΔT + m x Lwhere q is the quantity of heat, m is the mass of the material, c is the specific heat of the material, ΔT is the difference in temperature, and L is the material's latent heat of vaporization.

The value of q can now be calculated : q = (132.0 g) × (4.184 J/g°C) × (100°C – 7.4°C) + (132.0 g) × (2.26 × 106 J/kg)q = 62297.0 J. The heat required to boil 132 g of water beginning at 7.4°C is 62297.0 J. This means that 62.297 kJ of heat is required.

Know more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ11

Using the following formula, the total cell potential, Ecell, may be calculated:   Ecathode + anode equals Ecell. where Ecathode is the cathode half-reduction reaction's potential and Eanode.

We can determine the minimal Eanode needed to create a cell potential of 0.90 V since the engineer suggests employing a half-reaction with EPod = -0.75 V at the cathode:

Ecathode + anode equals Ecell.

Eanode: 0.90 V = -0.75 V

Eanode = 0.75 0.90 volts

Eanode equals 1.65 V.

The half-reaction employed at the anode must thus have a standard reduction potential of -1.65 V or less.

The typical reduction potential of the half-reaction utilised at the anode, on the other hand, has no upper limit. Yet, a higher Ecell and a more effective galvanic cell would be produced by a larger reduction potential at the anode.

We can utilise the half-reaction to create a balanced equation for the anode half-reaction:

Cu(s) becomes Cu2+(aq) plus 2e-

learn more about  half-oxidation reaction's potential.here:

https://brainly.com/question/23302600

#SPJ4

An exothermic chemical reaction between a solid and a liquid results in gaseous products. It is a spontaneous reaction.

When a chemical reaction takes place with the release of heat, it is known as an exothermic chemical reaction. An exothermic chemical reaction is a chemical reaction that releases energy in the form of heat, light, or sound during the process. The burning of paper is an example of an exothermic chemical reaction. When paper burns, heat and light are produced, which we can feel or observe.

The reaction is spontaneous if the Gibbs free energy, delta G is negative. A reaction will be spontaneous if its delta G is negative. The reaction will proceed from left to right if delta G is negative, and it will proceed from right to left if delta G is positive. A reaction will be at equilibrium if delta G is zero.The reaction mentioned in the question is an exothermic chemical reaction because it results in the release of heat. As a result, the reaction is spontaneous. The production of gaseous products indicates that a gas is formed during the reaction. Therefore, this reaction is spontaneous.

Learn more about Exothermic reaction here:

https://brainly.com/question/10373907

#SPJ11

The correct match are: q = nCAT for Heating or cooling within a phase if moles are given, q = NAΔH for Heating or cooling during a phase change, and q = mcΔT for Heating or cooling within a phase if mass is given.

q = nCAT is used to calculate Heat lost or gained when heating or cooling within a phase if moles are given. In this equation, n is the number of moles, C is the heat capacity of the substance, A is the temperature change.

q = NAΔH is used to calculate Heat lost or gained when heating or cooling during a phase change. In this equation, N is the number of moles, ΔH is the enthalpy of fusion or vaporization.

q = mcΔT is used to calculate Heat lost or gained when heating or cooling within a phase if mass is given. In this equation, m is the mass of the substance, c is the specific heat capacity of the substance, ΔT is the temperature change.

Learn more about Phase change here:

https://brainly.com/question/30270780

#SPJ11

Answer:

a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde

CH3CH2OH + [O] → CH3CHO

b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene

CH3CH2OH + [O] → CH2=CH2 + H2O

c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal

CH3CH2CH2OH + [O] → CH3CH2CHO

d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)

(CH3)2CHOH + [O] → (CH3)2CO

e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal

CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO

f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal

Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O

(please could you kindly mark my answer as brainliest)

Answer:

The organism that provides energy to all other organisms in an ecosystem is usually a primary producer, which is an organism that produces its own food through photosynthesis or chemosynthesis. In this ecosystem, the primary producer is likely the prairie grass, as it converts sunlight into energy through photosynthesis and is the basis of the food chain. The other organisms listed (coyote, vulture, prairie dog) are consumers and obtain their energy by eating other organisms, either directly or indirectly.

(please could you kindly mark my answer as brainliest )

In contrast to C3 plants, C4 plants have a different leaf structure and metabolic process. Carbon dioxide is first fixed in mesophyll cells of C4 plants.

where it is then transported to bundle sheath cells where it is broken down to release CO2 for the Calvin cycle. The key distinction between C4 and C3 plants is the division of carbon fixation and the Calvin cycle into various cells. C4 plants are more common in arid and semi-arid areas because they are more effective at photosynthesis in hot and dry conditions. In a typical C4 plant, the Calvin cycle and the first fixation of carbon dioxide take place in separate cells, the mesophyll cells, and the resulting four-carbon molecule is then transported to the bundle sheath cells in a C3 plant.

learn more about photosynthesis here:

https://brainly.com/question/29764662

#SPJ4

Answer: A food chain shows what eats what.  A food web is made up of all the food chains in the ecosystems.

Explanation: Hope that helps!

Answer:

Explanation:

A food chain outlines who eats whom.

A food web is all of the food chains in an ecosystem.

The mass of Ca is 0.355 g.

Tums tablet has a mass of 0.565 g.

A 0.196 g piece of the tablet is found to contain 0.123 g of Ca.

Mass percent = (Mass of element in the compound / Mass of the compound) × 100

The mass of Ca in the given piece is,

The mass percent of Ca = (Mass of Ca in the given piece / Mass of the given piece) × 100

= (0.123 / 0.196) × 100 = 62.75510204 %

This means, in every 100 grams of Tums tablet, Ca is present in 62.75510204 grams (approximately).

Therefore, the mass of Ca in 0.565 g of Tums tablet is,

Mass of Ca in 0.565 g of Tums tablet = 0.565 × (62.75510204 / 100) = 0.3546475852 g ≈ 0.355 g

The mass (in grams) of Ca in the whole tablet is approximately 0.355 g.

To learn more about the mass of elements refer - https://brainly.com/question/22139340

#SPJ11

The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out is known as Shielding.

Electrons in an atom are negatively charged particles, and they are attracted to the positively charged nucleus. However, the outer electrons of an atom are also repelled by the inner electrons that are closer to the nucleus. This repulsion is due to the negative charges of the electrons, and it partially cancels out the attraction of the nucleus for the outer electrons.

Shielding is the phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out. This makes it possible for electrons in higher energy levels to be farther from the nucleus, so they are less strongly attracted and easier to remove.

Learn more about Shielding here: https://brainly.com/question/27985711

#SPJ11

"Late-movers have a substantial advantage in this market since inventory should be cheaper to acquire for those firms that have entered markets more recently" is not true regarding the competitive dynamics. This is because late-movers face many challenges.

Sharing economy refers to a peer-to-peer (P2P) networking concept where consumers and organizations have the opportunity to share, sell, or rent products and services to one another directly without the involvement of middlemen. The sharing economy includes various industries, such as ride-sharing, accommodation-sharing, co-working spaces, and others.

The competitiveness of a sharing economy marketplace is influenced by factors such as the number of competitors, the level of brand recognition, pricing strategies, product quality, customer service, and others. When new entrants join a sharing economy market, existing players will have to adjust to remain competitive. Therefore, it is vital for market participants to monitor the competition's tactics and come up with new strategies to stay ahead of the curve.

However, late-movers do not have a substantial advantage in this market since inventory should be cheaper to acquire for those firms that have entered markets more recently is not true regarding the competitive dynamics of most sharing economy marketplaces.

Learn more about Sharing economy here:

https://brainly.com/question/29361595

#SPJ11

The homo of the nucleophile in a reaction set for organic chemistry is the highest occupied molecular orbital (HOMO), which is the highest energy orbital that contains at least one electron.

The lowest unoccupied molecular orbital (LUMO) of the electrophile is the lowest energy orbital that does not contain any electrons.

When attempting a reaction set for organic chemistry, the HOMO of the nucleophile will react with the LUMO of the electrophile to form a new bond. The HOMO is considered to be the electron-rich species and the LUMO is considered to be the electron-poor species.

This interaction between the two species leads to the formation of the new bond. The nature of the new bond is determined by the nature of the two species.

If the two species are of the same element, the bond is covalent. If the two species are of different elements, the bond is polar covalent or ionic depending on the difference in electronegativity between the two species.

To know more about nucleophile click on below link:

https://brainly.com/question/28325919#

#SPJ11

Answer:

The balanced equation for the decomposition of potassium chlorate is:

2KClO3 → 2KCl + 3O2

This equation tells us that for every 2 moles of KClO3 that decompose, 3 moles of O2 are produced.

To calculate the mass of KClO3 needed to produce a one-day supply of oxygen for an adult, we first need to calculate the amount of oxygen consumed per day by an average adult. We are given that the average adult consumes 909 g of O2 per day.

We can use the molar mass of O2 to convert grams to moles:

1 mol O2 = 32 g

909 g O2 = 28.4 mol O2

Next, we need to determine how much KClO3 is needed to produce 28.4 mol of O2. From the balanced equation, we know that 2 moles of KClO3 are needed to produce 3 moles of O2.

So, the number of moles of KClO3 needed is:

(28.4 mol O2) × (2 mol KClO3/3 mol O2) = 18.93 mol KClO3

Finally, we can use the molar mass of KClO3 to convert moles to grams:

1 mol KClO3 = 122.55 g

18.93 mol KClO3 = 2,322 g KClO3

Therefore, to provide a one-day supply of oxygen for an adult consuming 909 g of O2 per day, an oxygen candle would need approximately 2,322 grams of potassium chlorate.

The  correct answer is d All of the above

The protonation of a neutral ketone creates an electrophilic species that is activated toward nucleophilic attack, which is said to occur under acid-catalyzed conditions.

Therefore, All of the above are true: the resulting species becomes more electrophilic, subsequent nucleophilic attack on the resulting species is said to occur under acid-catalyzed conditions, and the resulting species has a positive charge.

Wat is a ketone?A ketone is an organic compound with a carbonyl group (CO) bound to two other carbon atoms.

The chemical formula for a ketone is RCOR′, where R and R′ can be any group from the periodic table.

Ketones are classified as carbonyl compounds since they contain a functional group with a carbon atom double-bonded to an oxygen atom.

When the carbonyl group of a neutral ketone is protonated, the resulting species is activated toward nucleophilic attack.

When the  group of a neutral ketone is protonated, the carbonyl carbon atom acquires a partial positive charge, and the oxygen acquires a partial negative charge

As a result, the carbonyl carbon atom becomes more electrophilic than before. The carbonyl group of the resulting species is more prone to nucleophilic attack than it was in the original ketone. The nucleophile can be a negative ion or a lone pair of electrons.

Subsequent nucleophilic attack on the resulting species is said to occur under acid-catalyzed conditions.

For more information about ketone protonation refer here

https://brainly.com/question/28205796

#SPJ11

Le Chatelier's principle predicts that when a stress or change is added to a system at equilibrium, the system will adjust in order to counteract the stress or change. The principle can be used to describe the shift in the direction of the chemical equilibrium in response to changes in pressure, temperature, or concentration.

Le Chatelier's principle states that when the temperature is increased, the equilibrium system will absorb the heat by shifting the equilibrium position in the direction that uses up the heat energy. If heat is a product of the reaction, the equilibrium will shift to the left. If heat is a reactant, the equilibrium will shift to the right.

Here, in the case of the reaction of nitrogen and hydrogen to create ammonia:

N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ∆H = −92 kJ/mol

The reaction produces heat, therefore the reaction is exothermic. An increase in temperature will cause a shift in equilibrium to the left, as the reaction will try to use up the excess heat. This means that the reaction will reduce the amount of NH₃ in the system, leading to a decrease in the concentration of NH₃.

Learn more about Le Chatelier's Principle here:

https://brainly.com/question/29009512

#SPJ11

Answer:

To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).

Volume of water = 125 mL = 0.125 L

Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:

Molarity = number of moles / volume of solution

Molarity = 2.00 mol / 0.125 L

Molarity = 16.0 M

Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.

(Please could you kindly mark my answer as brainliest)

Answer:

True.

The manipulated variable and the independent variable refer to the same thing in an experiment. It is the variable that is intentionally changed or manipulated by the experimenter to observe its effect on the dependent variable.

c. 276 mL of 1.58 M HCl.

To answer this question, we need to use the mole ratio between the two reactants: 1 mole of HCl for every 1 mole of NaHCO3.

In this case, we need 23.2 g of NaHCO3, which is equal to 0.273 moles (23.2 g / 84.02 g/mol).

Since we need 1 mole of HCl for every 1 mole of NaHCO3, we can calculate the number of moles of HCl needed with the following equation: 0.273 moles of NaHCO3 x 1 mole HCl/1 mole NaHCO3 = 0.273 moles of HCl.

Now we can use the molarity of HCl (1.58 M) to calculate the volume of HCl needed. 1.58 M HCl x 0.273 moles HCl/1 L HCl = 0.433 L HCl, or 433 mL of HCl. Therefore, the correct answer is c. 276 mL of 1.58 M HCl.

To know more about mole ratio, refer here:

https://brainly.com/question/28997213#

#SPJ11

This balanced equation represents the principle of conservation of atoms, which is a fundamental principle of chemistry in the sense that the number and type of atoms are the same on both sides which means that no atoms were created or destroyed during the reaction, only rearranged to form new molecule.

A balanced equation is described as an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge are the same for both the reactants and the products.

Analyzing the diagram,

1 nitrogen atom (N)

3 hydrogen atoms (H)

1 carbon atom (C)

2 oxygen atoms (O)

1 nitrogen atom (N)

4 hydrogen atoms (H)

1 carbon atom (C)

2 oxygen atoms (O)

This can only mean that no atoms were created or destroyed during the reaction, only rearranged to form new molecules.

Learn more about balanced equation atr:

https://brainly.com/question/11904811

#SPJ1

Here are the given properties. The task is to decide whether each property is a physical property or a chemical property:

1. Solubility: Physical property

2. Flammability: Chemical property

3. Reactivity: Chemical property

4. Color: Physical property

5. Density: Physical property

6. Melting point: Physical property

There are two types of properties: Physical property and Chemical property. In this task, we have to identify which property among Solubility, Flammability, Reactivity, Color, Density, Melting point is Physical property or Chemical property.

A Physical property is a characteristic that defines the behavior or appearance of a substance without any changes in its composition. Physical properties can be identified by measuring, observing, or using physical methods.

A Chemical property is a characteristic that defines the behavior or the ability of a substance to undergo a chemical change or to transform into a new substance. The correct answer is given above.

To learn more about "physical property", visit: https://brainly.com/question/12330204

#SPJ11

The given statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true because the rate of the reaction is proportional to the concentration of both reactants.

The second-order reaction is a chemical reaction in which two reactants interact and the rate of the reaction is proportional to the concentration of both reactants or to the square of the concentration of a single reactant. The equation is as follows:

k = k[reactant1] [reactant2] or k = k[reactant1]²

The reaction rate constant (k) for a second-order reaction is proportional to the concentration of one or two reactants. The concentration of the reactants has an impact on the reaction rate, as indicated by the order of the reaction.

Therefore, the statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true.

Learn more about second-order reaction here: https://brainly.com/question/14520581.

#SPJ11

Answer:

In chemical kinetics, the rate constant (k) is a proportionality constant that relates the rate of a chemical reaction to the concentrations of the reactants. It is often included in the rate law equation, which expresses the relationship between the rate of the reaction and the concentrations of the reactants.

However, the rate constant is not truly constant because it can vary with different experimental conditions. The rate constant is affected by factors such as temperature, pressure, and the presence of catalysts or inhibitors. For example, an increase in temperature usually leads to an increase in the rate constant, while the addition of a catalyst can decrease the activation energy and increase the rate constant.

Two specific examples that support this statement are:

1) The effect of temperature on the rate constant: Consider the reaction A → B, which has a rate law equation of rate = k[A]. If the temperature is increased, the rate constant will increase due to the increase in kinetic energy of the reactant molecules. This means that the reaction will proceed faster at higher temperatures, even if the concentration of A remains the same.

2) The effect of catalysts on the rate constant: Consider the reaction C + D → E, which has a rate law equation of rate = k[C][D]. If a catalyst is added to the reaction, it can increase the rate constant by providing an alternate pathway with a lower activation energy. This means that the reaction will proceed faster at the same concentrations of C and D with the catalyst present than without it.

Explanation:

Answer:

The only difference is that ozone is made up of three oxygen atoms, while the stuff we breathe (molecular oxygen) is made up of only two atoms. Solar rays high in the atmosphere convert O2 to O3. In the upper atmosphere, rays from the Sun break a normal oxygen molecule into two separate oxygen atoms.

Answer: Carbon's valence shell is unique because it has 4 valence shell electrons, which means it is less likely to gain or lose electrons to other elements. Rather, it shares its electrons. In other words, it tends to form covalent bonds (4) rather than ionizing. This results in carbon being able to form long chains or rings.

In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.

A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.

A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.

Learn more about anode at:

https://brainly.com/question/17109743

#SPJ11