which researcher discovered the principles of classical conditioning?

A. The expression for the focal length of the glasses is 1/f = 1/do + 1/di. B. The focal length of the glasses that will allow the nearsighted person to see distant objects is 46 meters.

(a) To find the focal length of the glasses that will allow the nearsighted person to see distant objects clearly, we can use the formula:

1/f = 1/do + 1/di

where f is the focal length, do is the distance of the far point (in meters), and di is the distance of the image formed by the glasses (in meters). We want the person to be able to see distant objects clearly, so di should be at infinity. Therefore, the equation becomes:

1/f = 1/do + 1/infinity

1/f = 1/do

Solving for f, we get:

f = do

Substituting the given value of do, we get:

f = -46 m

However, the focal length should be a positive value, so we take the absolute value of f, which gives:

f = 46 m

(b) Numerically, the focal length of the glasses is 46 meters.

learn more about focal length of the glasses: https://brainly.com/question/30905555

#SPJ1

The complete question goes thus:

A person who is nearsighted has a far point of do-46 m. She wears glasses that are designed to sit d = 2.7 cm rom her eyes Randomized Variables do-4.6 m d-2.7 cm > 50% Part (a) Write an expression for the focal length of the glasses which will allow her to see distant objects clearly Grade Summa Deductions Potential ry 0% 100% Submissions Attempts remaining: 35 (5% per attempt) detailed view END DELI CLEAR Submit Hint I give up! Hints: 200 deduction per hint. Hints remaining: 5 Feedback: 296 deduction per feedback. là 50% Part (b) Numerically, what is the focal length in m?

The number of degrees of freedom of a vibrating system depends on the number of coordinates used to describe the position of each mass. Thus, the correct option is (B).

Degrees of freedom can be explained as the number of independent ways in which a system can move. In general, a vibrating system has several degrees of freedom. For instance, a system with N particles moving in three dimensions will have 3N degrees of freedom.

The degrees of freedom of a vibrating system depend on the number of coordinates used to describe the position of each mass. Therefore, the answer is option (B). The formula to calculate the degrees of freedom in a system with N particles is:

df = 3N - C

Where

df is the number of degrees of freedom and

C is the number of constraints.

Learn more about degree of freedom here: https://brainly.com/question/28527491

#SPJ11

The kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j, ignoring friction, can be calculated using the equation KE = PEinitial - PEfinal, which states that the change in kinetic energy is equal to the change in potential energy. Therefore, the kinetic energy of the system is 165 J - 75 J = 90 J.

The kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 J is 46.12 J.How to calculate the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j?

The potential energy of the system is given by: PE = 1/2 k x^2 ………. (1)where PE is the potential energy, k is the spring constant, and x is the extension of the spring. The kinetic energy of the system is given by: KE = 1/2 m v^2 ……… (2)where KE is the kinetic energy, m  is the mass, v is the velocity of the object from equation (1), the spring constant k is given as: k = 2PE / x^2 ………. (3)The extension of the spring is given as: x = √ (2PE / k) ………. (4)From equation (2), the velocity of the object is given as v = √ (2KE / m) ………. (5)Initial Potential Energy = 0 JFinal Potential Energy = 165 JPE = 165 JPE = 1/2 k x^2 ………. (1)0.27 kg mass attached to a springThe mass of the object is given as: m = 0.27 kgFrom equation (3):k = 2PE / x^2 = 2 x 165 / x^2From equation (4):x = √ (2PE / k) = √ (2 x 165 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 165 / (2 x 165 / x^2))x = √ (2 x 165 x^2 / 2 x 165)x = √ x^2x = x Final Potential Energy = 75 JPE = 1/2 k x^2 ………. (1)From equation (3):k = 2PE / x^2 = 2 x 75 / x^2From equation (4):x = √ (2PE / k) = √ (2 x 75 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 75 / (2 x 75 / x^2))x = √ (2 x 75 x^2 / 2 x 75)x = √ x^2x = xThe velocity of the object is given as:v = √ (2KE / m)From equation (1):165 J = 1/2 k x^2From equation (3):k = 2PE / x^2Substituting the values of k and PE in the above equation, we get:165 J = 1/2 (2 x 165 / x^2) x^2165 J = 165 JFrom equation (2):KE = 1/2 m v^2Substituting the values of m and v in the above equation, we get:KE = 1/2 x (0.27 kg) x v^2KE = 0.135 v^2 JFrom equation (4):x = √ (2 x 75 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 75 / (2 x 75 / x^2))x = √ (2 x 75 x^2 / 2 x 75)x = √ x^2x = xFrom equation (2):KE = 1/2 m v^2Substituting the values of m and v in the above equation, we get:KE = 1/2 x (0.27 kg) x v^2KE = 0.135 v^2 JFrom equation (5):v = √ (2KE / m)Substituting the values of KE and m in the above equation, we get:v = √ (2 x 46.12 / 0.27)Therefore, the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j is 46.12 J.

For more information follow the link: https://brainly.com/question/15764612

#SPJ11

When changing lanes, it is recommended to allow a gap of at least 3 seconds between your vehicle and the vehicle in front of you before merging into the next lane.

A gap refers to a region of space or energy where there is a discontinuity or absence of a physical quantity. This can manifest in several ways, depending on the context in which the term is used. In general, gaps in physics can represent areas of uncertainty or incompleteness in our understanding of the natural world and can provide important clues for future research and discovery.

One common example of a gap in physics is the band gap in solid-state materials, which refers to the range of energies where electrons cannot exist due to the nature of the material's electronic structure. This gap affects the electrical conductivity and optical properties of the material and is important in the design of electronic devices like solar cells and transistors.

To learn more about Gap visit here:

brainly.com/question/28177346

#SPJ4

The momentum of the girl is -120 kgm/s in the direction opposite to the boy.

The momentum of an object is defined as the product of its mass and velocity. Since the girl moves in the negative direction, we can consider her velocity to be negative.

The momentum of the girl can be calculated as:

momentum = mass x velocity

momentum = 40 kg x (-3 m/s)

momentum = -120 kgm/s

Therefore, the momentum of the girl is -120 kgm/s.

Note that momentum is a vector quantity and has a direction, which in this case is negative because the girl moves in the opposite direction to the one considered positive.

Learn more about momentum:

https://brainly.com/question/7538238

#SPJ11

Metamorphism is a geological process that involves the transformation of pre-existing rocks into new types of rocks through changes in temperature, pressure, and chemical composition.

During metamorphism, rocks undergo significant changes in their physical, mineralogical, and structural properties.

One common change that occurs during metamorphism is recrystallization, where the mineral grains in a rock grow larger or change shape, resulting in a coarser texture. This occurs due to high temperatures and pressures that cause the atoms in the minerals to rearrange themselves.

Another common change is foliation, which is the development of a layered or banded structure in a rock due to the alignment of mineral grains. Foliation occurs when rocks are subjected to differential stress, where the pressure is greater in one direction than in another. This can result in the development of slate, schist, or gneiss from previously existing sedimentary, igneous, or metamorphic rocks.

Metamorphism can also cause changes in the chemical composition of a rock, such as the addition or removal of certain minerals. This can occur due to the circulation of fluids, such as water or magma, which can react with the rock and alter its composition.

Overall, metamorphism is a complex process that can result in a wide range of changes in rocks. These changes can create new types of rocks with unique properties and structures, and can provide important insights into the geological history and evolution of the Earth.

learn more about metamorphism here

https://brainly.com/question/12605044

#SPJ4

Yes, melting lead into a liquid to form pellets is a physical change.

This is because the chemical composition of lead remains the same even after it has been melted and then solidified into pellets. In other words, the molecular structure of lead does not change during the melting process, but only the physical state of the material changes from a solid to a liquid and then back to a solid. This type of change is reversible and can be undone by cooling the lead pellets to their solid state. Therefore, melting lead to form pellets is an example of a physical change rather than a chemical change.

To know more about physical change, here

brainly.com/question/17931044

#SPJ4

--The complete Question is, Is lead melting into liquid to form pellets a physical change? --

The initial separation d between the mass and the spring is 0.14m.

A m = 2.88kg mass starts from rest and slides a distance d down a frictionless θ = 34.7° incline. While sliding, it comes into contact with an unstressed spring of negligible mass. The mass slides an additional 0.185m as it is brought momentarily to rest by compression of the spring (k = 409N/m).

The initial separation d between the mass and the spring can be calculated using the equation:

d = (2*m*g*sin(θ)) / k

Substituting in the given values, we get:

d = (2*2.88kg*9.8m/s2*sin(34.7°)) / 409N/m

d = 0.14m

Therefore, the initial separation d between the mass and the spring is 0.14m.

To know more about initial separation, refer here:

https://brainly.com/question/12970890#

#SPJ11

The process through which tectonic plates—large slabs of Earth's lithosphere—split away from each other is known as seafloor spreading.

Mantle convection causes seafloor spreading and other tectonic activity processes. Divergent plates, a form of tectonic activity that results in plates moving away from each other, causing seafloor spreading. Diverge Seafloor spreading results in three major characteristics of the seafloor: the age of the seafloor becomes progressively older as one moves away from mid-ocean ridges,  the elevation of the seafloor becomes progressively lower as one moves away from mid-ocean ridges, and the magnetic history of the seafloor bears the striped-pattern of the Earth's magnetic.

Learn more about seafloor

https://brainly.com/question/17914057

#SPJ1

The average density of the neutron star that has a mass of about 1.5Msun and a radius of 10 kilometers rounded off to two significant figures is 5.9 × 10¹⁴ kg/cm³

The average density of a neutron star can be calculated using the following formula;`d = (3M)/(4πr³)`where `d` is the average density of the neutron star, `M` is the mass of the neutron star, and `r` is the radius of the neutron star.Using the given values in the formula, we get;`d = (3 × 1.5 × 1.989 × 10³⁰)/(4π × (10 × 10³)³)` = 5.9 × 10¹⁷ kg/m³To convert kg/m³ to kg/cm³, we can use the following conversion factor;1 m³ = 10⁶ cm³Therefore,1 kg/m³ = 10⁻³ kg/cm³So, the average density of the neutron star in kg/cm³ is;`d = (5.9 × 10¹⁷) × (10⁻³)` = 5.9 × 10¹⁴ kg/cm³Therefore, the average density of the neutron star is 5.9 × 10¹⁴ kg/cm³ (rounded to two significant figures).Answer: 5.9 × 10¹⁴ kg/cm³.

More on density: https://brainly.com/question/15700804

#SPJ11

a) The displacement of the particle is 390.25 ft

b) the total distance traveled by the particle over the given interval is 136.5 ft.

To find displacement, integrate the velocity function from the lower limit of 1 to the upper limit of 6. Mathematically, we have that displacement of the particle is given by,

Displacement = ∫v(t) dt …(1), From the information, the velocity function is given as:

v(t) = t³ - 9t² + 23t - 15

Integrating the above function w.r.t t gives us the displacement function as: Displacement function,

s(t) = ¼ t⁴ - 3t³ + 11.5t² - 15t.

Now, substituting the upper and lower limits of integration to the above displacement function gives us the displacement of the particle as;

Displacement = s(6) - s(1)= 384.5 - (-5.75)= 390.25 ft.

Therefore, the displacement of the particle is 390.25 ft.

To find the total distance that the particle travels, we integrate the absolute value of velocity function from the lower limit of 1 to the upper limit of 6. Mathematically, we have that the total distance that the particle travels is given by,

Total distance = ∫|v(t)| dt …(2)

From the given information, the velocity function is given as:

v(t) = t³ - 9t² + 23t - 15

To get the absolute value of the above function, we have;

|v(t)| = |t³ - 9t² + 23t - 15|

The function v(t) cuts the x-axis at the points (1, 0), (2.205, 0), (3.795, 0), and (6, 0). Therefore, the total distance traveled by the particle over the given interval is given by;

Total distance = ∫|v(t)| dt=∫¹ⁿ|t³ - 9t² + 23t - 15| dt …(3)

Where n = 2.205, 3.795, and 6. Breaking the integration in equation (3) into smaller intervals where v(t) is positive and negative and finding the area under the curve using definite integration method, we have;

∫¹².²⁰⁵ (t³ - 9t² + 23t - 15) dt - ∫².²⁰⁵¹ ¹ (t³ - 9t² + 23t - 15) dt

= 53.85 + 28.80 + 53.85 = 136.5 ft

Therefore, the total distance traveled by the particle over the given interval is 136.5 ft.

Learn more about distance and displacement at : https://brainly.com/question/29769926

#SPJ11

Observations indicate that over billions of years, galaxies in general tend to change from irregular and chaotic shapes to more organized and structured shapes such as spiral or elliptical galaxies.

This is believed to occur due to gravitational interactions between galaxies and the merging of smaller galaxies to form larger ones. In the early universe, galaxies were much more irregular and chaotic, but as they evolved and interacted with each other, they began to form the more recognizable shapes that we see today. This process is thought to have played a key role in the formation and evolution of galaxies over cosmic time.

To know more about elliptical galaxies, here

https://brainly.com/question/14243370?referrer=searchResults

#SPJ4

In the development of throwing, trunk rotation in which the lower trunk and upper trunk rotate together, as a unit, is called blocked rotation.

Trunk rotation is a crucial part of body mechanics. Trunk rotation is a crucial element of many activities. It's crucial for sports that require rapid turning movements, such as baseball, golf, and soccer. The core muscles, including the lower back and abs, work together to rotate the torso to the right and left when you twist the trunk. When performing a throwing movement, trunk rotation is essential.

Blocked rotation is when the upper and lower trunk moves together as one unit during a throwing movement. The technique is known as a "block" because it appears as if the body is blocking the movement. This type of rotation, which is also known as linear or non-differentiated, is often used by beginners or athletes who haven't yet mastered the throwing motion. It's less common in seasoned athletes who have mastered throwing technique because it can reduce throwing distance and speed.

Learn more about trunk rotation at:

https://brainly.com/question/967455

#SPJ11

Answer:

good

Explanation:

i need help with physical sciences

The net force on a 30.0 NC charge located at the origin by two other charges is 43.72 N.

First, we need to calculate the force between the charge at the origin and the charge at (-4.0 m, 2.0 m)F₁ = k.q₁.q₂/r²

Here, q₁ = 30 NC, q₂ = -50 NC, and r = √(4² + 2²) = √20F₁ = k.q₁.q₂/r² = 9 × 10⁹.30.(-50)/(√20)² = -27.71 N

Since the charge at (-4.0 m, 2.0 m) is negative, the force is negative.

Next, we need to calculate the force between the charge at the origin and the charge at

(3.0 m, 3.0 m).F₂ = k.q₁.q₂/r²

Here, q₁ = 30 NC, q₂ = 40 NC, and r = √(3² + 3²) = √18F₂ = k.q₁.q₂/r² = 9 × 10⁹.30.40/(√18)² = 71.43 N

Since the charge at (3.0 m, 3.0 m) is positive, the force is positive.

The net force is given by the vector sum of the forces: F_net = F₁ + F₂ = -27.71 + 71.43 = 43.72 N

Therefore, the net force on a 30.0 NC charge located at the origin by two other charges, one is -50.0 NC located at (-4.0 m, 2.0 m) and 40.0 NC located at (3.0 m, 3.0 m) is 43.72 N.

Learn more about the net force on a charge here:

https://brainly.com/question/31044552

#SPJ11

While p-waves are the fastest-moving seismic waves and the first to be felt or recorded during an earthquake, their velocities alter as they go through the interior of the earth.

P waves can travel through fluids, solids, and gases, whereas S waves can only travel through solids. Scientists use this information to determine the makeup of the Earth.

Detailed Description. P-wave and S-wave routes through the earth. By studying seismic vibrations, scientists learned that the Earth's outer core is liquid. P waves can pass through both solid and liquid materials.

To know more about seismic waves visit:-

https://brainly.com/question/28790684

#SPJ1

Two coherent sources of intensity ratio 1: 4 produce an interference pattern. The visibility of fringes will be 0.6. Thus, the correct option is B.

The interference pattern results from the superimposition of two coherent sources. When light waves from two coherent sources are superimposed, an interference pattern is created, resulting in a pattern of light and dark fringes. The distance between the two sources, the wavelength of the light, and the angle of observation all affect the pattern. This pattern is referred to as an interference pattern.

The interference pattern's visibility is defined as the ratio of the maximum intensity to the minimum intensity.

V = (Imax- Imin)/(Imax + Imin)

where, V is the visibility of the fringe, Imax is the maximum intensity, and Imin is the minimum intensity.

According to the question, Two coherent sources of intensity ratio 1:4 produce an interference pattern.

Using the above formula: V = (Imax - Imin)/(Imax + Imin)

We know that the two sources' intensity ratio is 1:4.

Therefore, let the intensity of the first source be I1 and the intensity of the second source be I2.I1/I2 = 1/4 = I2 = 4I1

Imax = I1 + I2 = I1 + 4I1 = 5I1

Imin = I1 - I2 = I1 - 4I1 = -3I1

Substitute the value of Imax and Imin in the visibility formula:

V = (Imax - Imin)/(Imax + Imin)= (5I1 - (-3I1))/(5I1 + (-3I1))= (5I1 + 3I1)/(5I1 - 3I1) = 8I1/2I1 = 4

Therefore, the visibility of fringes will be 0.6.

Therefore, the correct option is B.

Learn more about Interference pattern here:

https://brainly.com/question/1581262

#SPJ11

In order to accurately sample a waveform with a maximum frequency of 2kHz, the minimum sample rate would be 4kHz.

A waveform is sampled by repeatedly measuring its value at regular intervals of time. The process of sampling a waveform is known as sampling. A continuous-time signal is converted to a discrete-time signal by this process. The sample rate determines the number of samples per unit time, and it is inversely related to the sampling interval.

The minimum sample rate that can be used to measure a waveform is determined by the Nyquist criterion, which states that the sample rate must be at least twice the maximum frequency present in the waveform. If the waveform has a maximum frequency of 2kHz, the Nyquist criterion indicates that the sample rate must be at least 4kHz.

Anything less than that will cause aliasing, which is when high-frequency components are mistaken for lower-frequency components because of undersampling.

Therefore, if a waveform has a maximum frequency of 2kHz, the minimum sample rate needed to accurately sample it is 4kHz, according to the Nyquist criterion.

Learn more about waveform: https://brainly.com/question/25699025

#SPJ11

In this experiment, the factor is the ambient color schemes. In other words, the independent variable is the ambient color schemes.

This means that the different colored light bulbs are the factor in the experiment. Three different rooms are used in the experiment and each room has a different colored light bulb.

A within-subjects experiment with 30 volunteers is being used to evaluate the impact of light color on mood. There is a single light bulb form used in the experiment with three different ambient color schemes.

Each room has a different colored light bulb, and there are three different rooms in the experiment. The factor in this experiment is the ambient color scheme because it is the independent variable.

To know more about ambient color Schemes:

https://brainly.com/question/30392329

#SPJ11

The correct statement of the ripples on the pond is that they have a frequency of 2 hertz.

In physics, the number of cycles of a periodic wave that occur in a unit of time is known as the frequency of that wave. Its unit is hertz (Hz), which indicates cycles per second.A hertz is a unit of frequency that indicates how many times per second a wave oscillates. The amount of time it takes for one complete cycle of the wave is inversely proportional to its frequency. A wave with a high frequency oscillates more frequently than one with a low frequency.What is hertz (Hz)?Hertz (Hz) is the standard unit of frequency. One hertz (Hz) is equal to one cycle per second, meaning that a wave with a frequency of 2 Hz repeats twice in one second. Therefore, the frequency of the ripples on the pond is 2 hertz.

More on frequency: https://brainly.com/question/25811461

#SPJ11

The correct energy conservation (loop) equation for this circuit is 1.5V - EF 0.25m + ED 0.063m - EF 0.25m + 1.5V - EF 0.25m + ED 0.063m - EF 0.25m + 1.5V - ED 0.063m = 0.

The correct charge conservation (node) equation is i + EF 0.25m - ED 0.063m = 0. To solve for the factor that goes in the blank, we can solve the charge conservation equation for ED: ED = i + EF 0.25m. Therefore, ED = V/m. To calculate the magnitude of ED, substitute the known values into the equation: ED = V/m = (1,5V + 0,25m . EF)/0,063m.

To calculate the electron current at location D in the steady state, substitute the known values into the charge conservation equation: i = ED - EF 0.25m = (V/m - 0.25m*EF).

Learn more about Energy conservation: brainly.com/question/31047668

#SPJ11

A 0.400 kg mass hangs from a string with a length of 0.9 m, forming a conical pendulum. the period of the pendulum in a perfect circle is 1.4 s then the angle of pendulum is 14.68°.

Given:

Mass of the object = 0.4kg

Length of string = 0.9m

Period of conical pendulum = 1.4s

The angle of pendulum is calculated by using this formula :

T = 2π(r/g)1/2

where, T is the time period of the circular motion g is acceleration due to gravity r is radius of the circle

Let us assume, Angle made by the string with the vertical axis = αNow, Radius of circle can be given as,

R = l.sinα

Given the period of the conical pendulum as 1.4s

we can find the acceleration due to gravity as follows = 2π(r/g)1/2r = l.sinα2π(r/g)1/2 = Tg = 4π2(l.sinα)2/T2g = 4π2(l2sin2α)/T2sinα = gT2/4π2l2Sinα = (9.8 m/s2× 1.4 s2)/(4π2 × (0.9 m)2)Sinα = 0.253α = sin-1(0.253)α = 14.68°

Hence, the angle made by the string with the vertical axis is 14.68°.

To know more about Pendulum please visit :

https://brainly.com/question/29225143

#SPJ11

The straight line distance between the trains is changing at a rate of 36.08 mph. This can be calculated using the Pythagorean theorem.

Let's call the distance between the trains x, the distance of the North train from the station y, and the distance of the East train from the station z.

We know that x² = y² + z²

We also know the rate of change for y and z. The rate of change for y is -26 mph and the rate of change for z is 48 mph.

The rate of change of x is calculated using the following equation: (2xy × -26 + 2xz × 48)/(2x). Substituting the given values, we get:

(2 × 13 × -26 + 2 × 10 × 48) / (2 × 13) = -36.08 mph

Therefore, the straight line distance between the trains is changing at a rate of 36.08 mph.

Learn more about Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ11

The correct statement is: Student 1 traveled 60 meters, and student 2 traveled 30 meters.

Calculate the speed of each student:

Student 1: 40 meters / 60 seconds = 0.67 meters per second

Student 2: 20 meters / 60 seconds = 0.33 meters per second

Use the speed to calculate the distance each student would travel in 90 seconds:

Student 1: 0.67 meters per second × 90 seconds = 60 meters

Student 2: 0.33 meters per second × 90 seconds = 30 meters

Therefore, the correct statement is: Student 1 traveled 60 meters, and student 2 traveled 30 meters.

What is speed?

Speed is a measure of how fast an object is moving. It is defined as the distance traveled by an object per unit of time, usually expressed in meters per second (m/s) or kilometers per hour (km/h).

The formula for calculating speed is:

Speed = Distance / Time

Where distance is the distance traveled by the object, and time is the duration of the travel.

To know more about speed, visit:

https://brainly.com/question/28224010

#SPJ1

There is no investigation among the given options that cannot be addressed using gel electrophoresis.

Gel electrophoresis is a common laboratory technique used to separate and analyze DNA, RNA, and proteins based on their size, charge, and other properties. It is widely used in various fields of research, including forensic science, genetics, and biotechnology. Gel electrophoresis can be used to detect DNA contamination, analyze gene expression, determine DNA fingerprinting, and establish paternity testing. Therefore, all the investigations listed, including checking for genomic DNA contamination and purity of samples, examining gene expression, determining DNA fingerprint, and paternity testing can be addressed using gel electrophoresis.

To know more about electrophoresis, here

brainly.com/question/28709201

#SPJ4

Yoda must have a speed of approximately 7613.99 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

To stay in a circular orbit around the Earth at a certain altitude, an object must have a specific speed known as the orbital speed. The orbital speed is determined by the gravitational force between the object and the Earth, as well as the distance between them.

The formula for the orbital speed of an object in a circular orbit around the Earth is:

[tex]v = \sqrt{GM/r}[/tex]

where v is the orbital speed, G is the gravitational constant, M is the mass of the Earth, and r is the distance between the object and the center of the Earth (in this case, the altitude of Yoda above the Earth's surface plus the radius of the Earth).

First, we need to convert the altitude of Yoda above the surface of the Earth to the distance between Yoda and the center of the Earth:

r = altitude + radius of Earth

r = 500 km + 6371 km

r = 6871 km

Now we can substitute the values into the formula:

[tex]v = \sqrt{GM/r}[/tex]

[tex]v = \sqrt{6.6743 \times 10^{-11} m^3 kg^{-1} s^{-2} \times 5.9722 \times 10^{24} kg / 6871000 m)[/tex]

v = 7613.99 m/s

Hence velocity should be 7613.99 m/s.

To learn more about gravitational force:

https://brainly.com/question/25624188

#SPJ11

The final expression for the charge Q(t) at any time t is given as:Q(t) = CV(t) = 2.5 × 10^-11 e- t/RC

To find the charge on the capacitor at any time t, we need to find the total current in the circuit and then find the charge using the formula Q = CV, where V is the potential difference across the capacitor.Let's find the total current in the circuit using the formula:

I = (1/LC)½ x (e- Rt/2L) sin(wt - φ)

where, L = inductance C = capacitance R = resistance ω = (1/LC)½ = 5000 sinφ = RωL = 260 × 5000 × 0.2 = 2600

Let's now substitute the given values into the formula and simplify:I = (1/(0.2 × 1.25 × 10^-5))½ x (e- 260t/2 × 0.2) sin(5000t - φ)I = 10^5 x (e- 130t) sin(5000t - φ). Let's now find the charge Q on the capacitor using the formula:

Q = CV where, C = capacitance V = potential difference across the capacitor. To find the potential difference across the capacitor, we need to find the current passing through it, which is given as the total current minus the current passing through the inductor. Let's find the current passing through the inductor using the formula:

I L = I x sin(wt - φ)IL = I x sin(5000t - φ).The potential difference across the capacitor can be calculated using the formula:V C = V 0 × e- t/RC where, V0 = initial potential difference across the capacitor R = resistance of the circuit C = capacitance of the circuit. Let's now find the current passing through the capacitor:I C = (I - I L)I C = I - I L

Now we have all the necessary formulas to find the charge Q(t) at any time t. Let's substitute the given values into the formulas and simplify:

I = 10^5 x (e- 130t) sin(5000t - φ)IL = I x sin(5000t - φ)IC = I - I LVC = V0 × e- t/RCQ = CVCI = I - I L = 10^5 x (e- 130t) sin(5000t - φ) - I sin(5000t - φ)V C = V 0 × e- t/RC = 2 × 10^-6 e- t/RCQ = C × V C = (1.25 × 10^-5) × (2 × 10^-6) e- t/RC = 2.5 × 10^-11 e- t/RC

Now, let's substitute the values of I and V C into the formula for IC to obtain:IC = 10^5 × (e- 130t) sin(5000t - φ) - 10^5 sin(5000t - φ) × e- t/RC. Therefore final expression for the charge Q(t) at any time t is given as:Q(t) = CV(t) = 2.5 × 10^-11 e- t/RC

More on charge: https://brainly.com/question/13867387

#SPJ11

We can use the equation [tex]q(t) = C.V(t)[/tex] to calculate the charge q (t) on the capacitor at any time t: [tex]q(t) = 1,25 . 10-5 Farad.V(t)[/tex].

The charge on a capacitor in a series circuit at any time t is given by the equation [tex]q(t) = C.V(t)[/tex], where C is the capacitance of the capacitor and V(t) is the voltage across the capacitor at time t.

In the given circuit, the capacitance of the capacitor is 1.25 x 10-5 Farad, and the initial charge on the capacitor is 2 x 10-6 Coulomb. Therefore, to find the charge q(t) on the capacitor at any time t, we need to find the voltage V(t) across the capacitor at time t.

To do this, we must first calculate the total inductance and resistance in the circuit. The total inductance is the sum of the inductances of each inductor, so the total inductance in this circuit is 0.2 Henry. The total resistance is the sum of the resistances of each resistor, so the total resistance in this circuit is 260 Ohms.

We can now use Ohm's Law (V = IR) to calculate the voltage V(t) across the capacitor at time t:[tex]V(t) = I(t).R[/tex], where I (t) is the current at time t and R is the total resistance in the circuit. Since the inductance of the circuit is 0.2 Henry, we can use the equation L*di/dt = V to calculate the current at time t, I [tex](t) = V(t)/R[/tex].

Substituting this into Ohm's Law, we get: V(t) = (V(t)/R)*R. Solving for V(t), we get V(t) = V(t). Therefore, the voltage V(t) across the capacitor at any time t is equal to the voltage at time t.

Finally, we can use the equation [tex]q(t) = C.V(t)[/tex]to calculate the charge q(t) on the capacitor at any time t: [tex]q(t) = 1,25 . 10-5 Farad.V(t)[/tex].

Learn more about capacitor: https://brainly.com/question/13090301

#SPJ11

When a ball is swung in a circle at the end of a string, it is constantly changing direction due to the force acting on it. This force is called the centripetal force, which is provided by the tension in the string.

When the string holding the ball breaks, there is no longer any force acting on the ball to keep it moving in a circular path. As a result, the ball moves in a straight line path in accordance with Newton's first law of motion, which states that an object at rest will remain at rest or an object in motion will continue to move in a straight line path at a constant speed unless acted upon by an external force.

In this case, the external force was the tension in the string, which was providing the centripetal force to keep the ball moving in a circular path. Once the string broke, the ball no longer experienced any centripetal force, and thus continued to move in a straight line path.

To learn more about centripetal force refer to:

brainly.com/question/11324711

#SPJ4

When a truck is moving at constant velocity, and a rock is dropped from the midpoint of the ceiling and strikes the floor below, the rock hits the floor at exactly below the midpoint of the ceiling. The correct option is (A) exactly below the midpoint of the ceiling.

When a rock is dropped from the midpoint of the ceiling of a moving truck, the rock strikes the ground at exactly below the midpoint of the ceiling of the moving truck. This is because of the following reason:

When a truck is moving at constant velocity, everything in it is also moving at a constant velocity relative to the earth, including the rock. Hence, the rock will continue to move forward at the same velocity as the truck. It is said that the rock has the same horizontal velocity as that of the truck.

Now when the rock is dropped, the force of gravity pulls the rock towards the earth. Due to this force of gravity, the rock falls vertically towards the earth. Since the rock has the same horizontal velocity as that of the truck, it falls vertically downwards but continues to move forward along with the truck.

Hence, the rock strikes the ground at exactly below the midpoint of the ceiling of the moving truck. Therefore, the correct answer is option (A).

To learn more about "constant velocity", https://brainly.com/question/20215498

#SPJ11

Answer:

0.92°C

Explanation:

C = change in Q/m × change in T

so

change in T = change in Q/C ×m

C= 49

m= 38

change in Q= 1714

then

= 1714/49 × 38

= 1714/1862

= 0.92°C

rounded off to 2 d.p