Which statement best describes the direction of force shown by the magnetic field lines around a bar magnet?
A. Away from both the magnet's north and south pole
B. From the magnet's north to its south pole
C. From the magnet's south pole to its north pole
D. Toward both the magnet's north and south pole

Answer: -9.8 m/s2

Explanation:

Answer:

The acceleration of the car is 10.16m/s²

Explanation:

Given parameters:

  Initial velocity = 8.77m/s

   Final velocity = 47.8m/s

   Time duration  = 3.84s

Unknown:

Acceleration of the car = ?

Solution:

To find the acceleration, we must bear in mind that this physical quantity is the change in velocity with time;

     Acceleration  = [tex]\frac{V - U}{T}[/tex]

V is the final velocity

U is the initial velocity

T is the time taken

  Input the parameters and solve for acceleration;

      Acceleration  = [tex]\frac{47.8 - 8.77}{3.84}[/tex]   = 10.16m/s²

The acceleration of the car is 10.16m/s²

Answer:

v = 66 m/s

Explanation:

Given that,

The initial velocity of a car, u = 0

Acceleration of the car, a = 11 m/s²

We need to find the final velocity of the toy after 6 seconds.

Let v is the final velocity. It can be calculated using first equation of motion. It is given by :

v = u +at

v = 0 + 11 m/s² × 6 s

v = 66 m/s

So, the final velocity of the car is 66 m/s.

Answer:

22 crates

Explanation:

Power = Force ×Distance/time taken

Power = m×a×d/t

Power = 30×9.81×0.9/60 (1min was converted to second)

Power = 264.87/60

Power = 4.4145Watts

If my average power output us 100aw, then;

Number of crate to load = average power/4.4145

Number of crates to load = 100/4.4146

Number of crates to load = 22.6

Hence I will have to load about 22 crates onto the truck in 1 minute for my average power output in lifting the crates to be 100 W.

Answer:

5400 N

Explanation:

f=ma

f= 1200*4.5

f=5400N

Answer:

(a) 22 kN

(b) 36 kN, 29 kN

(c) left will decrease, right will increase

(d) 43 kN

Explanation:

(a) When the truck is off the bridge, there are 3 forces on the bridge.

Reaction force F₁ pushing up at the first support,

reaction force F₂ pushing up at the second support,

and weight force Mg pulling down at the middle of the bridge.

Sum the torques about the second support.  (Remember that the magnitude of torque is force times the perpendicular distance.  Take counterclockwise to be positive.)

∑τ = Iα

(Mg) (0.3 L) − F₁ (0.6 L) = 0

F₁ (0.6 L) = (Mg) (0.3 L)

F₁ = ½ Mg

F₁ = ½ (44.0 kN)

F₁ = 22.0 kN

(b) This time, we have the added force of the truck's weight.

Using the same logic as part (a), we sum the torques about the second support:

∑τ = Iα

(Mg) (0.3 L) + (mg) (0.4 L) − F₁ (0.6 L) = 0

F₁ (0.6 L) = (Mg) (0.3 L) + (mg) (0.4 L)

F₁ = ½ Mg + ⅔ mg

F₁ = ½ (44.0 kN) + ⅔ (21.0 kN)

F₁ = 36.0 kN

Now sum the torques about the first support:

∑τ = Iα

-(Mg) (0.3 L) − (mg) (0.2 L) + F₂ (0.6 L) = 0

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (0.2 L)

F₂ = ½ Mg + ⅓ mg

F₂ = ½ (44.0 kN) + ⅓ (21.0 kN)

F₂ = 29.0 kN

Alternatively, sum the forces in the y direction.

∑F = ma

F₁ + F₂ − Mg − mg = 0

F₂ = Mg + mg − F₁

F₂ = 44.0 kN + 21.0 kN − 36.0 kN

F₂ = 29.0 kN

(c) If we say x is the distance between the truck and the first support, then using our equations from part (b):

F₁ (0.6 L) = (Mg) (0.3 L) + (mg) (0.6 L − x)

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (x)

As x increases, F₁ decreases and F₂ increases.

(d) Using our equation from part (c), when x = 0.6 L, F₂ is:

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (0.6 L)

F₂ = ½ Mg + mg

F₂ = ½ (44.0 kN) + 21.0 kN

F₂ = 43.0 kN

Answer:

Explanation:

given:

weight of bridge = 44 kN

weight of truck = 21 kN

a) truck is off the bridge

since the bridge is symmetrical, left support is equal to right support.

Left support = Right support = 44/2

Left support = Right support = 22 kN

b) truck is positioned  as shown.

to get the reaction at left support, take moment from right support = 0

∑M at Right support = 0

Left support (0.6) - weight of bridge (0.3) - weight of truck (0.4) = 0

Left support = 44 (0.3) + 21 (0.4)  

                                  0.6

Left support = 36 kN

Right support = weight of bridge + weight of truck - Left support

Right support = 44 + 21 - 36

Right support = 29 kN

c)

as the truck continues to drive to the right, Left support will decrease

as the truck get closer to the right support,  Right support will increase.

d) truck is directly under the right support, find reaction at Right support?

∑M at Left support = 0

Right support (0.6) - weight of bridge (0.3) - weight of truck (0.6) = 0

Right support = 44 (0.3) + 21 (0.6)  

                                  0.6

Right support = 43 kN

Answer:

[tex]a=0.33\frac{m}{s^2}[/tex]

Explanation:

Hello.

In this case, since the force is defined in terms of the mass and acceleration as follows:

[tex]F=ma[/tex]

Given the force and the mass, we can compute the acceleration as shown below:

[tex]a=\frac{F}{m}=\frac{25N}{75kg}=\frac{25kg\frac{m}{s^2} }{75kg}\\ \\a=0.33\frac{m}{s^2}[/tex]

Best regards.

Answer:You need to give more explanation sorry

Explanation:

Answer:

4.20 seconds

Explanation:

Supposing that silly goose weighs 69 pounds, we need to start on the math.

Simple maths, truly and really. 69/1=69, of course.

Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.

d. 49.0 m/s

this is your answer. ....OK. ..

please mark me as brainliest. .....

follow me.....my friend. .....

Answer:

Explanation:

Given the density of silicon as 2.33g/cm³

We are to convert this to kg/cm³

We will be using the following conversion factors

1000g = 1kg

2.33g = x

Cross multiply

1000x = 2.33

x = 2.33/1000

x = 0.00233kg

Also we need to convert 1cm³ to 1m³

1cm = 0.01m

1cm³ = 0.01×0.01×0.01

1cm³ = 0.000001m³

Substituting into the density value of silicon

2.33g/cm³ = 0.00233kg/0.000001m³

= 2330kg/m³

Answer:

Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.

Answer: Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.

Explanation:

Answer:

The energy contained is 5.856 x 10⁻⁶ J

Explanation:

Average energy density of electromagnetic radiation per unit volume is given by the equation;

[tex]U_{avg} = \frac{1}{2} \epsilon _o E_o[/tex]²

where;

[tex]\epsilon _o[/tex] is permittivity of free space

[tex]E_o[/tex] is maximum electric field strength, this can be calculated from the intensity of sun reaching the Earth's surface.

[tex]E_o = \sqrt{\frac{2I}{\epsilon_o C} }[/tex]

The intensity of sun reaching the Earth is 1350 W/m²

[tex]E_o = \sqrt{\frac{2*1350}{8.885*10^{-12}*3*10^8 } } \\\\E_o = 1008.96 \ V/m\\[/tex]

Average energy density of electromagnetic radiation per unit volume;

[tex]U_{avg} = \frac{1}{2} \epsilon_o E_o^2\\\\U_{avg} = \frac{1}{2} (8.85*10^{-12})(1008.96)^2\\\\U_{avg} = 4.505 *10^{-6} \ J/m^3[/tex]

The energy contained in a 1.30 m³ volume is given by;

E = (4.505 x 10⁻⁶)(1.3)

E = 5.856 x 10⁻⁶ J

Therefore, the energy contained is 5.856 x 10⁻⁶ J

Answer:

we need the image to do so.

Explanation:

sorry

Answer:

1.3 m/s

Explanation:

It is given that,

Mass of bird A, [tex]m_A=2.2\ kg[/tex]

Mass of bird B, [tex]m_B=1.7\ kg[/tex]

Initial speed of bird A is 0 as it was at rest

Initial speed of bird B is 3 m/s

We need to find the velocity of the center of mass for this system of two birds. Let it is V. so,

[tex]v_{cm}=\dfrac{m_Au_A+m_Bu_B}{m_A+m_B}\\\\v_{cm}=\dfrac{2.2\times 0+1.7\times 3}{2.2+1.7}\\\\v_{cm}=1.3\ m/s[/tex]

So, the center of mass for this system is 1.3 m/s.

Answer:

Tolerance: [tex]\pm 10\%[/tex]

Explanation:

Resistor Color Codes

Resistor Color Coding uses colored bands to quickly identify the resistive value or resistors and its percentage of tolerance.

Since the question does not provide a specific color table, we'll use the table attached below.

The colors of the resistor shown in the question are:

First band: orange

Second band: blue

Third band: brown

Fourth band: silver

The colors relate to the following numbers respectively:

3, 6, 10Ω, [tex]\pm 1\%[/tex]

The first two colors form the number 36

The third color is the multiplier: 36*10Ω = 360Ω

And the fourth color is the tolerance or the possible variation of the resistance [tex]\pm 1\%[/tex]

Resistance: 360Ω

Tolerance: [tex]\pm 10\%[/tex]

Answer:

I think it would be 50 I am not really sure

Explanation:

I think you would have to divid 1000 by 20 Again I'm not sure

Answer:

θ = 33.0705°

Explanation:

The angle between the two vectors is given by the formula;

Cos θ = (F1 • F2)/(|F1| × |F2|)

We are given;

F1 = 8.92i + 17.37j

F2 = 12.44i + 7.11j

Thus;

Cos θ = [(8.92i + 17.37j) • (12.44i + 7.11j)]/[√(8.92² + 17.37²) × √(12.44² + 7.11²)]

Cos θ = (110.9648 + 123.5007)/(19.5265 × 14.3285)

Cos θ = 0.8380

θ = cos^(-1) 0.8380

θ = 33.0705°

The reading on the scale is closest to 708N.

The weight of any object is the mass times the acceleration due to gravity on Earth or any other planet.

Weight W = mg

where g = 9.81 m/s²

Given is the mass of person, m = 60kg, and the acceleration downward of the elevator a =2 m/s² , then the weight will be

W = m(a+g)

W = 60x (2+9.81)

W=  60x11.8

W= 708 N

Thus, reading on the scale will be 708N

Learn more about weight.

https://brainly.com/question/10069252

#SPJ2

Answer:

[tex](1630.13\pm 300.10)\ kg/m^3[/tex]

Explanation:

Given that,

The radius of a sphere is (6.45 ± 0.30) cm

Mass of the sphere is (1.79 ± 0.08) kg

Density = mass/volume

For sphere,

[tex]d=\dfrac{m}{V}\\\\d=\dfrac{m}{\dfrac{4}{3}\pi r^3}\\\\d=\dfrac{1.79\ kg}{\dfrac{4}{3}\pi (6.4\times 10^{-2}\ m)^3}\\\\d=1630.13\ kg/m^3[/tex]

We can find the uncertainty in volume as follows :

[tex]\dfrac{\delta V}{V}=3\dfrac{\delta r}{r}\\\\=3\times \dfrac{0.3\times 10^{-2}}{6.45\times 10^{-2}}\\\\=0.1395[/tex]

Uncertainty in mass,

[tex]\dfrac{\delta m}{m}=\dfrac{0.08}{1.79}\\\\=0.0446[/tex]

Now, the uncertainty in density of sphere is given by :

[tex]\dfrac{\delta d}{d}=\dfrac{\delta m}{m}+\dfrac{\delta V}V}\\\\=0.0446+0.1395\\\\\dfrac{\delta d}{d}=0.1841\\\\\delta d=0.1841\times d\\\\\delta d=0.1841\times 1630.13\\\\\delta d = 300.10\ kg/m^3[/tex]

Hence, the density pf the sphere is [tex](1630.13\pm 300.10)\ kg/m^3[/tex]

Answer:

Making the transition from young adulthood to middle adulthood can be difficult for some people. There are many changes which affect areas in a person’s biology, their psychology, their social life and their spiritual relationship. There are multiple stages of development which may affect an individual during middle adulthood which can be defined between either 30-65 years old or 40-65 years old.

Explanation:

Answer:

potential energy

Explanation:

Answer:

hhhhhhhh

Explanation:

Answer:

11760 joules

Explanation:

Given

Mass (m) = 75kg

Height (h) = 16m

Required

Determine the increment in potential energy (PE)

This is calculated as thus:

PE = mgh

Where g = 9.8m/s²

Substitute values for m, g and h.

P.E = 75 * 9.8 * 16

P.E = 11760 joules

The potential energy of the man in the fifth floor of the building has increased by 11760J.

Given the data in the question;

Potential energy; [tex]P_E =\ ?[/tex]

Potential energy is the energy possessed by a particle due to its position relative to other particles. It is expressed as:

[tex]P_E = mgh[/tex]

Where m is mass of the particle, h is its height above ground level and g is acceleration due to gravity( [tex]g = 9.8m/s^2[/tex] ).

We substitute our values into the equation

[tex]P_E = 75kg\ *\ 9.8m/s^2\ *\ 16m\\\\P_E = 11760kg.m/s^2\\\\ P_E = 11760J[/tex]

Therefore, the potential energy of the man in the fifth floor of the building has increased by 11760J.

Learn  more: https://brainly.com/question/16850959

This question is incomplete, the complete question is;

The displacement of a string carrying a traveling sinusoidal wave is given by y(x,t)=ymsin(kx - ωt -φ) .

At time t = 0, the point at x = 0 has velocity v₀ and displacement y₀.

The phase constant φ is given by tanφ =:

A) ωv₀ /y₀    

B) ωv₀ y₀  

C) v₀ /ωy₀  

D) y₀ /ωv₀      

E) ωy₀ /v₀

Answer:

E) ωy₀ /v₀

Explanation:

Given that;

displacement of a wave is; y(x,t) = ym sin (kx - ωt - φ)

we differentiate the given equation with respect to time

d/dt (y(x,t)) = d/dt(ym sin(kx - ωt - φ) )

v(0,0)) = -ym ωcos (k(0) - ω(0) - φ) )

v₀ = -ym ωcos (-φ)  ......... lets leave thisas equ 1

At t = 0, x = 0

the displacement of the wave is

y(0,0) = ym sin (k(0) - ω(0) - φ)

y₀ = ym sin(-φ) ..............let this be equ 2

y₀/v₀ = (ym sin(-φ)) / (-ym ωcos (-φ)) = ( -ym sin(φ)) / (-ym ωcos (φ))

(tanφ)/ω = y₀/v₀

tanφ = y₀ω/v₀

therefore the required value is y₀ω/v₀

option (E).  

Answer:

Explanation:

Given

Initial reading on scale =40 N

So, we can conclude that weight of the sack is 40 N

After this a 10 N force is applied upward on the sack such that the net force becomes (40-10) N downward (because downward force is more)

This net downward force is the resultant of earth graviational pull and the applied upward force.

So, this downward force acts on the machine which inturn applies an upaward force of same magnitude called Normal reaction.

This situation can be diagramatically represented by figure given below  

Answer:

40N

Explanation:

trust

Answer:

1.4 m/s to the left

Explanation:

just took it c:

Answer:

10 seconds

Explanation:

As it starts from rest, then u=0

and by III rd equation of motion: