which value represents the first ionization energy of a nonmetal

Answers

Answer 1

Answer:

increase in going from left to right across a given period.

Explanation:

Nonmetals, which are found in the right-hand region of the periodic table, have relatively large ionization energies and therefore tend to gain electrons. Ionization energies generally increase in going from left to right across a given period.

hope it is helpful:)


Related Questions

For the reaction whose balanced equation is as follows, find how many grams of
zinc phosphate will be produced by the reaction of 5.00 grams of ammonium
phosphate.
3 ZnCla + 2 (NH4)3PO4 → Zn3(PO4)2 + 6 NHACI

Answers

Answer:

oxygen

Explanation:

cause thats what we need

explain the factors that affect the separation of mixtures in amino acids

Answers

Consider you have a mixture of amino acids(contains all set of amino acids such as polar, non polar). Other than TLC, how are you supposed to separate a single amino acid from the mixture without loss of amino acid quantitatively.

Can someone help me with this chemistry question?

Answers

Answer: b


Explanation; the ice has less thermal energy and the water has more thermal energy so the water transfers some of its thermal energy to the ice melting it and eventually making cold water.

Which ingredients are needed to transform nadp to nadph?.

Answers

Answer:

according to online:

"Hydrogen ions are transported with the electrons along the chain of reactions. In photosystem I, the electrons are energized, and the energy is stored in molecules of NADP+. During these reactions, the NADP+ molecules are reduced by the addition of electrons. A hydrogen ion is added to NADP+ to form NADPH."

Explanation:

hope this helps!! :)

why is transfer of the heat by the actual movement of the warmed matter

Answers

Answer:

The warmer the water gets the particles begin to expand and starts vibrating

The positvie part of the atom found in the center of the atom

Answers

That would be protons ! They are positive

Draw the structure of the product that is formed when the compound shown below is treated with ch3co3h under aqueous acidic conditions.

Answers

The structure of the product that is formed is (2R,3S)-hexane-2,3-diol

The missing compound from the given question known as Hex-2-ene is shown with its stick formula in the reactant side of the image attached below.

Alkene reacts with a peracetic acid via the process of epoxidation of alkenes to produce an intermediate known as oxiranes. This intermediate is later being treated with aqueous acid to give a chemical compound with two hydroxyl substituents known as the glycol(diol) family.  

Hex-2-ene reacts with peracetic acid CH₃CO₃H.

During the process of the reaction, an oxygen atom is moved from the peracetic acid to the C = C double bond, generating an oxirane ring.

Here;

Peracetic acid is considered to be an electrophilic oxidizing agent because the transferred oxygen atom has a positive charge.

The intermediate (oxirane) is further reacted with aqueous acid to produce an enantiomer of the diol family.

Learn more about the epoxidation of the alkene family.

https://brainly.com/question/9126498

What happens to the 3 carbons in the krebs cycle.

Answers

Answer:

Tthe 3-carbon pyruvate molecule made in glycolysis loses a carbon to produce a new, 2-carbon molecule called acetyl CoA. The carbon that is removed takes two oxygens from pyruvate with it, and exits the body as carbon dioxide (CO 2​start subscript, 2, end subscriptt).

Explanation:

Help me please, I don't get it. Please & thank you, xoxo !

Answers

Sorry I accidentally touched it

Help please, take a screenshot who will answer will be brainiest.

Answers

Answer:

1:

•a typical metal tends to have a higher melting and boiling point than a typical non metal which has a low melting and boiling point

•a typical metal tends to have a shiny appearance than a typical non metal which has a dull apearance

•and finally, a typical metal is a good conductor of electricity and heat while a typical non metal isn't

2:

elements E and C

3:

a, it doesn't conduct electricity

b, it's a good conductor of heat/ has a high melting point/ has a high boiling point (you can choose either that sits right with you)

how can teh human body looose heat? (conduction, convecion, radiation) and WHY

Answers

Answer:

Radiation and conduction

Explanation:

The human body lose heat by these two ways, because everything that touches our bodies and is in a temperature below us will receive part of our heat (conduction), and you can figure out that we lose heat by radiation because a human bright in a heat cam

Two chemicals, Z and X react completely to form a product, Y. If 8.7 grams of x react to produce 19.5 grams of Y, how many grams of Z must have reacted to form this much product?

Answers

Answer:

Z= 10.8

Explanation:

The simple formula Z + X = Y can solve this problem. Since we are given that,

X= 8.7 GramsY= 19.5 Grams

Then we can just substitute the actually values for the letters.

Z + 8.7 = 19.5

From here, we can just do simple math to find the answer.

Z + 8.7 - 8.7 = 19.5 - 8.7

Z = 10.8

So, 10.8 grams of Z reacted to form the product.

Draw the structure of the product that is formed when the compound shown below undergoes a reaction with 1 equivalent of ch3mgi and then is treated with water.

Answers

When the compound shown is treated CH3MgI followed by water, 1,3 - cyclohexadienol is formed.

Grignard reagent is an alkylmagnesium halide. Grignard reagents are important synthetic tools in chemistry. They are used to synthesize and number of compounds in the laboratory.

When the Grignard reagent, CH3MgI is reacted with compound shown followed by treatment with water, the product of the reaction is 1,3 - cyclohexadienol whose structure is shown in the second image attached to this answer.

Learn more: https://brainly.com/question/9309478

How many dozens of silver atoms are in the piece of jewelry?.

Answers

the piece of jewelry contains 5.08x10 21to the power dozen Ag atoms.

7.
Wh
6
Which Lewis electron-dot diagram is correct for
CO2?
2-m
A :0
B.
:0:0:0
0:0
:
©:
::::C::0
D. 0
:0:0:
XX

Answers

Answer:

O=c=o

Explanation:

co2is nonpolar and it has linear molecular shape

which atoms typically form stable structures that are an exception to the octet rule

Answers

Mother answers are Neon and Argon

Is it possible to move the atoms close enough that the nuclei come in contact?

Answers

Answer:

I believe not.

Explanation:

From what I have been told atoms can never come into contact beyond the electron barrier.

what is the maximum concentration of salt in water for an ecosystem to be classified as a freshwater system?

Answers

Answer:

The saline water should be from 1000 ppm to 3000 ppm while fresh water is less than 1000 ppm

Please help me if you can. (I will give branliest to whoever answers first and if they have a reasonable answer.)

Answers

Silver : [Kr] 5s2 4d9
Tell : [Kr] 5s2 4d10 5p4
Radium : [Rn] 7s2
Lawren: [Rn] 5f14 7s2 7p1

Hope this helps!!!

2. What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?​

Answers

Answer:

Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.

Explanation:

What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?​

Answers

Answer:

you did not give the specific heat like formula like it takes 1kj to raise 28grams of water by 10 grams

How is heat transferred when a person holds a pen that is already at body
temperature?
A. From the hand to the pen
B. Heat is not transferred.
C. In both directions between the pen and the hand
D. From the pen to the hand
SUBMIT

Answers

Answer:

The answer is B.

Explanation:

Heat is not transferred.

How many grams of zinc chloride could be formed from the reaction of 3. 57g zinc with excess hcl?.

Answers

Zn+2HCl = ZnCl2 + H2
Zn= ZnCl2
65.38g Zn= 136.315 g ZnCl2
1g Zn = 136.315/65.38 g ZnCl2
3.57 g Zn = (136.315/ 65.38) × 3.57 g of ZnCl2
3.57g Zn = 7.443g ZnCl2

How many atoms of each element are in NaCI?


Enter your answer in the boxes:

|___| sodium

|___| chlorine

Answers

Answer:

well first you need 1 s then you need 1 ch

Explanation:

What is the mass of oxygen atoms in 0. 380 mol fe(co)5?.

Answers

Answer:39+30

Explanation:

One of the following is not a property of metals

O a
high malleability


high compressibility

Os high melting point

Od
high ductility

Answers

Answer:

O b

Explanation:

high compressibility is not the property of metal.

If the energy of the reactants is less than
the energy of the products, what kind of reaction is it.

Answers

The opposite type of reaction (where energy is taken in from the surroundings of a reaction and thus the energy of the reactants is lower than that of the products) is called an endothermic reaction

A fusion reaction always creates which of the following?

a A massive amount of energy.
b A massive amount of heat.
C A more massive atomic nucleus.
d A massive number of smaller nuclei.

Answers

A fusion reaction can be regarded as the type of reaction that occurs where two lighter elements come together in a type of reaction giving rise to a heavier/more massive element.

A fusion reaction always creates a more massive atomic nucleus (option c).

When the two lighter nuclei comes together in a reaction, a more heavier/massive nucleus is formed but its mass will still be less than the combined mass of the two reactant nuclei.

This also indicates that the left over mass may have been released as energy.

Learn more: https://brainly.com/question/18175586

How many atoms of nitrogen are in 1.5 moles of aspartame?

Answers

Answer:

459.11 g.

Explanation:

hope this helps

help for brainlist

More than 7,000 islands in the Philippines lack access to electricity, so after the sun goes down, light usually comes through kerosene lamps. While cheap, these fire hazards are bad for the environment and human health.
You are an entrepreneur and would like to suggest to the government of the Philippines a better solution to this problem. But to come up with the solution to this problem, you must first understand the nature of chemical bonding and factors that control the structure of compounds. You will study and understand natural materials behavior to build a very cheap and environmentally friendly lamp.

What material do you think can be a cheaper and better alternative to kerosene?



Question 2 options:

There is no better alternative to kerosene.


A material that contains ions, so it can conduct electricity.


A material that contains gas, as gases can conduct electricity.


A material having covalent boding.

Answers

Answer:

Question 1: What material do you think can be a cheaper and better alternative to kerosene?

Answer: Generic lamp oil can be used to replace kerosene in lamps. The cheaper lamp oil burns cleaner and has less odor than the more expensive kerosene.

Question 2:

Correct answer is the last option

Hope this helps!

Other Questions
Quadrilateral LKMN is similar to quadrilateral OPQR. Find the measure of side OP. Round your answer to the nearest tenth if necessary. If you were to make someone the president of the internet, who would it be and why? Use each integer only once. You must have each row, column, and diagonal adding up to the magic sum. I need help ASAP. thank you why are SATs so hard to study for Eating popcorn always _____ me thirsty.A. make B. making C. makes D. is makes Historically what types of discrimination have women been subjected to in the United States? Ive been asking but people just send me adult links can someone help? Discuss some of the reasons you feel that people have for either liking or disliking Excel What kind of fish is on the brink of commercial extinction?Question 3 options:Alaska Wild SalmonThe Pacific CodNorth Atlantic SalmonSouth Atlantic Swordfishwhat are known to swim near dolphins for protection?Question 5 options:codtunasalmonsharks HELP FAST 100! POINTS AND BRAINLIEST!Surface Water Lab ReportIntroductionUsing models is very important in science. In this lab, you will design a model that will help you investigate the relationship between land surfaces and water on Earth. Problem: How can we use the relationships between land surfaces and water to understand conservation of resources and pollution?Hypothesis: After completing steps 1 through 5 in your procedures, predict the number and locations of watersheds that will form in your watershed model. For example:Based on the positions of landscape features in my watershed model, I predict there will be ________ number of watersheds located at these locations in my model: __________________________________.Materials: If you would like to create your watershed model by hand, you will need the materials listed. Note: There are alternative procedures that do not require these materials.one sheet of plain white paperseveral sheets of old newspaper, or wax paper if availableone water-based marker (Note: do not use permanent marker)one spray bottle containing water (place on mist setting)digital camera, if availableProcedures:Place several sheets of newspaper or wax paper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. Crumple the sheet of white paper into a loose wad.Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat but should be wrinkled and puffed up from the crumpling.Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges. Do not allow the marker to color any other part of the paper.Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.If you have access to a digital camera, take a photograph of your work and include it in your Data and Observations.Record your observations of each watershed that forms in Table 1. Take note of headwaters, channels, divides, tributaries, mouths, floodplains, precipitation, and infiltration in your descriptions. Complete the Questions and Conclusion section of the lab report. Procedures without materials:Use the video demonstration of a watershed model linked on the lesson assessment page to complete the information below and answer the questions.Data and Observations: If you were able to take a photograph of your paper, or a screenshot of the demonstration, include a copy of this photo and label each of your watersheds in the model.Table 1: Observations of Watershed ModelObservationsSource of Surface WaterLocation on ModelWatershed 1Watershed 2Watershed 3Questions and ConclusionView the surface water animation clip of the Mississippi watershed in the lesson. Compare what is happening in this animation to what occurred to your watershed model. Identify and describe all the ways water moved in your watershed model. Be sure to include headwaters, channels, divides, tributaries, mouth, floodplains, precipitation, and infiltration in your description. How many different watersheds were in your model? How were you able to identify them?Earths landscape can change over time. What can happen to a watershed as a result? Based on what you observed in the lab, why does pollution become more than a local problem?In conclusion, how did your prediction of watershed locations match the watersheds in your model? In what ways could you continue to investigate the behavior of surface water and the creation of watersheds? How would further investigation provide research for strategies to solve the spread of water pollution? What is the theoretical yield of sodium chloride when 8.3 g of sodium is reacted with 4.5 g of chlorine? 2Na(s) + Cl2(g) 2NaCl(s) An ___ is part of a word or phrase standing for the whole.A)AbbreviationB)Acronym In a standard card deck, there are 52 different cards, which are divided into 4 suits (spades, diamonds, clubs, and hearts), with each suit containing 13 cards. What is the probability that in a randomly selected rearrangement of the card deck, the 3 of spades is after all the hearts When finding the margin of error for the mean of a normally distributed population from a sample, what is the critical probability, assuming a confidence level of 86%? 0. 14 0. 86 0. 93 0. 99. Which sentence contains a coordinating conjunction?O A. You choose green or you choose red.O B. Unless you're lying, Eduardo is next.O C Since were friends, let's go together.O D. Dogs the size of horses ran around.SUBME LIst types of computer process ? the endocrine organ that forms from the ruptured vesicular follicle is called the [tex]\boxed{\sf 3x-12=3}[/tex] State the universal law of gravitation.Answer in detail P: It's sunny.Q: It's snowing.R: It's not raining.Translate the following symbols: P -> QO It's not sunny and it's snowing.O It's sunny if and only if it's snowing.O If it's not sunny, then it's not snowing.O If it's sunny, then it's snowing.