Write a Program that will print all the numbers divisible by 2 between 0 and 100​

Answer:

Here the answer is given as follows,

Explanation:  

The real-life situation of a deadlock resolution where a role is played by the victim is given as follows:  

Example: An example of such a situation are often a one-way lane where the flow of traffic is merely in a method. Thus, on just one occasion, the flow of traffic can enter one direction only. Each entrance/exit gate is often considered a resource. during this case, if two cars are coming from both the entrances and that they are often considered as two tasks, then one among the cars must copy or we will say hand over its resource in order that the opposite car gets the prospect to first cross the lane or we will say the opposite task gets executed.  

 a)  Victim: The steps which describe how a victim is chosen are given as follows :  

   The task which is terminated so as to interrupt things of deadlock is taken into account because of the victim.

There are often a variety of job pools that will be under a deadlock situation and therefore the victim is usually a low-priority task in order that the performance isn't affected that much and termination of this task doesn't cause any effect on the opposite jobs.

the main positive effect of selecting and terminating a victim is that things of deadlock are resolved and every one of the tasks can execute now.

The negative effect is that the task that's chosen because the victim is terminated and is executed at the previous. This whole process for choosing a victim then terminating it then restarting it again may consume some longer also.

b)  An easy deadlock priority is often set. this suggests that the victim’s task or the task is often terminated so as to interrupt the deadlock and other jobs can finish executing. After this, the task which is terminated are often later restarted and every one of the tasks can then execute without a deadlock.

 c) When employment gets terminated, the knowledge associated with it's stored. Are often This is often done in order that the work can be restarted again and therefore the information in it's not lost. Since the progress of the victim is stopped. Thus, the sole thanks to complete the victim’s task would be to start out it again. But before restarting the task, this must be considered that the victim’s task doesn't cause any deadlock within the system.  

Answer:

C

Explanation:

Decision Support Systems (DSSs) model information using OLAP, helps in providing assistance to evaluate and choose among different course of action.

For option A, an insurance company using DSS to evaluate risk of providing insurance to drivers who doesn't have perfect records and option B and D medical doctor entering symptoms into a system to aid in diagnosing and treating patients and dentist entering symptoms into a system to help diagnose and treat patients respectively

Answer:

Web services (web application) are an API type to be accessed via a network connection. While APIs are application interfaces, this means standardized communication between one application and another application.

Explanation:

        While API for all communication styles is used.

Answer:

1. It has a clear objective.

2. It's useful to your audience.

3. It's well-rehearsed.

4. Your presentation deck uses as little text as possible.

5. Your contact information is clearly featured.

6. It includes a call-to-action.

Explanation:

Answer:

The internet allows you to connect with people and information around the world. The internet is more broad and could include searching things up or message-based websites. Emails is more specific, with it being when you send someone a message (called an email) on a mail website (that allows you to get messages from other people, websites, etc.)

Explanation:

In my answer.

Answer:

Perimeter:

{ \tt{perimeter = 2(l + w)}}

Circumference:

{ \tt{circumference = 2\pi \: r}}

Just input the codes in the notepad

Explanation:

The file named as A10.java has been attached to this response. It contains the source code for the exercises. The source code contains comments explaining important parts of the code.

A few things to note;

i. To add an item to an arraylist, the add() method is used. For example to add an integer 7 to the arraylist named intList, simply write;

intList.add(7);

ii. To add an item to a hashmap, the put() method is used. The put method receives two parameters which are the key and value respectively. The key is a form of identifier used to store or retrieve a particular value in a hashmap. To store an integer 8 with a key of 5 in a hashmap named intMap, for example, simply write;

intMap.put(5,8);

Answer:B

Explanation: she she

Answer and Explanation:

Using Javascript:

test7_11_13(num){

If(num%7===0||num%11===0||num%13===0){

Console.log("yes it is a multiple of 7,11 or 13");

}

else{

Console.log("It is not a multiple of any of the numbers");

}

function(num){

var makeString= num.toString();

var splitString= makeString.split("");

var makeNumber= splitString.map(Number());

var New_number= makeNumber.reduce(function(a, b) {

return a+b};,0)

}

If(New_number%2===0){

Console.log("it's an even number");

}

else{

Console.log("it's an odd number")

}

If(num%2===0||num%3===0||num%5===0||num%7===0||num%11===0){

console.log("it's not a prime number");

}

else{

console.log("it's a prime number");

}

}

From the above we have used javascript if..else statements to test the conditions for each question and output the answer to the console using console.log(). In the last part for prime number, you could also choose to use else if statements(if,else if, else if) to test the value of the num parameter and output if it's a prime number.

Answer:

const MAXNR=150;

let candidates = {};

for(let i=2; i<=MAXNR; i++) {

   candidates[i] = true;

}

for(let p=2; p <= MAXNR; p++) {

   if (candidates[p]) {

       process.stdout.write(`${p} `);

       // Now flag all multiples of p as false

       i=2;

       while(p*i <= MAXNR) {

           candidates[p*i] = false;

           i++;

       }

   }

}

Solution :

A friend of mine have an old version of computer PC having the following components :

Input devices

Model name of the keyboard -- PUNTA , model number -- P-KB515

Model name of the mouse -- PUNTA, model number -- P-KB515

Output devices

Speaker : COMPAQ

Monitor : ACER,  Model Number  --- EB192Q

Storage : 500 MB capacity hard disk

RAM : 2 GB

Processor : Intel Pentium dual E1260 at the rate 1.80 GHz

It is provided with audio jacks

Answer:

I do not understand anything

Answer:

(i) C is increased (S, B same)

Explanation:

Cache are items which are stored in the computer at a hidden place. These are sometimes unwanted and they may hinder the speed and performance of the device. They exist to bridge speed gap.

Answer:

The object creation should be Arcade myArc("Games Ablaze",5);

Explanation:

Required

Why does the program generate an error?

The class definition is correctly defined and implemented;

The methods in the class are also correctly defined and implemented.

The error in the program is from the main method i.e.

int main() {  

       Arcade myArc('ames Ablaze, 5);  

       myArc.Print();  

   }

In the class definition;

Variable name was declared as string and variable rating was declared as integer

This means that, a string variable or value must be passed to name and an integer value or variable to rating.

Having said that:

Arcade myArc(Games Ablaze, 5); passes Games Ablaze as a variable to th function.

Game Ablaze is an incorrect string declaration in C++ because of the space in between Game and Ablaze

Also, no value has been assigned to the variable (assume the variable definition is correct).

This will definitely raise an error.

To correct the error, rewrite the object creation as:

Arcade myArc("Games Ablaze",5); where "Game Ablaze" is passed as string

Answer:

Kindly check explanation

Explanation:

The SQL statement above could be interpreted as follows :

create table command is used to create a table named 'persons' with five columns which are labeled :

person I'd : whose data type is an integer

last name column with a variable character data type with maximum length of 255

first name column with a variable character data type with maximum length of 255

address column with a variable character data type with maximum length of 255

city column with a variable character data type with maximum length of 255

The VARCHAR data type is ideal since we expect the column values to be of variable length.

Answer:

travel

Explanation:

One real world example of a singly-linked list would be travel. Imagine that you want to take a trip to your nearest neighbor state. To do so you would need to take a 2 buses and a train, but you can't just take any or in any order you wish. You first need to take the first bus at your current location, get off at the train station, take that train to the final stop, get off and take the bus to the final destination. Meaning there is a sequence of connected events that you must follow in order to get to your destination and the same opposite sequence of events to get back. This is exactly like a singly-linked list.

Answer:

The program is as follows:

prod = 1

isum = 0

for i in range(4):

   num = float(input())

   prod*=num

   isum+=num

avg = isum/4

print('{:.0f}'.format(prod))

print('{:.3f}'.format(avg))  

Explanation:

This initializes the product to 1

prod = 1

..... and sum to 0

isum = 0

The following iteration is repeated 4 times

for i in range(4):

Get input for each number

   num = float(input())

Calculate the product

   prod*=num

Add up the numbers

   isum+=num

This calculates the average

avg = isum/4

Print the products

print('{:.0f}'.format(prod))

Print the average

print('{:.3f}'.format(avg))  

Answer:

I think the third one (or the one with monkeys).

Explanation:

2+2 does not equal 5, so the if then statement is void because both parts are wrong.

1+1 does not equal 3 even if 2+3 =5, so it is not the second answer.

3+1 does not equal 3, but monkeys do fly and it is an or option, so when one of them is correct in an or, it is correct.

Answer:

A

Explanation:

Answer:

d. The system of water spray pipes did not have sufficient water supply

Explanation:

The Union Carbide India Ltd. was chemical factory situated at Bhopal that produces various pesticides, batteries, plastics, welding equipment, etc. The plant in Bhopal produces pesticides. In the year 1984, on the night of 2nd December, a devastating disaster occurred on the Bhopal plant which killed millions of people due to the leakage of the poisonous, methyl isocyanate. This disaster is known as Bhopal Gas tragedy.

Soon after the gas pipe exploded, the fire brigade started spraying water into the air to [tex]\text{knock down}[/tex] the cloud of the gases in the air but there was not sufficient amount of water in the water sprays and so it was not effective.

Thus the correct answer is option (d).

Answer: Pulldown menus

Explanation:

Pulldown menus refer to the graphical control element, that is identical to a list box, which enables user to be bake to select one value from a list.

They're regarded as the menu of options that will appear when an item is selected with a mouse. In this case, the item that the user selected will show at the top of the display screen, while the menu appears will show below it.

Therefore, Alex should use the pulldown menus to hide the long list of hypertext links so that it appears only in response to a tap of a major heading in the navigation list.

Answer:

Explanation:

The correct answer to this open question is the following.

The feature of organizations to manage needs to know about to build and use information system successful is the following.

Managers of successful organizations should know that companies have hierarchies and different structures in which these companies are organized.

Every company use systems and procedures that could be specialized to the degree the company requires. For that system to function, they have to be perfectly interconnected to all the areas of the company. The goal: to maximize efficiency and accomplish the goals.

Systems and procedures should take into consideration the culture and diversity of the workplace. There are interest groups in every organization that have special characteristics and requirements that have to be taken into consideration to create a much better system.

Good managers must be aware of these elements, and the different roles, goals, management styles, tasks, incentives, and departmental structure of the company so the system can better serve the purpose of the entire organization.

Answer:

public class Person {

   String name;

   int age;

   String phoneNumber;

   public Person(String name, int age, String phoneNumber){

          this.name = name;

          this.age = age;

          this.phoneNumber = phoneNumber;

   }

}

Explanation:

The code above is written in Java.

The following should be noted;

(i) To define a class, we begin with the keywords:

public class

This is then followed by the name of the class. In this case, the name is Person. Therefore, we have.

public class Person

(ii) The content of the class definition is contained within the block specified by the curly bracket.

(iii) The class contains instance variables name, age and phoneNumber which are properties specified by the Person class.

The name and phoneNumber are of type String. The age is of type int. We therefore have;

String name;

int age;

String phoneNumber;

(iv) A constructor which initializes the instance variables is also added. The constructor takes in three parameters which are used to respectively initialize the instance variables name, age and phoneNumber.

We therefore have;

public Person(String name, int age, String phoneNumber){

          this.name = name;

          this.age = age;

          this.phoneNumber = phoneNumber;

   }

(v) Notice also that a constructor has the same name as the name of the class. In this case, the constructor's name is Person.

Answer:

The class and constructor in C++ is as follows:

class Person {

 public:

   string name;     int age;     int phone;

   Person (string x, int y) {  

     name = x;       age = y;  

   }

};

Explanation:

This defines the class

class Person {

The specifies the access specifier

 public:

This declares the attributes; name, age and phone number

   string name;      int age;      int phone;

This defines the constructor for the name and age

   Person (string x, int y) {  

This gets the name and age into the constructor

     name = x;       age = y;  

   }

};

[tex]\boxed{ File }[/tex] is a collection of information stored under a single name.

[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]

Answer:

Explanation:A collection of information that is stored on a computer under a single name, for example a text document, a picture, or a program. The association between a file and the program that created the file. Displays the contents of the current folder or library.

Answer:

a. The user access agreement

Explanation:

The first document that should be created would be the user access agreement. This is a document that holds all of the policies and guidelines that the employees of a company need to follow when using the companies equipment, software, or network. This includes behavior on the internet such as browsing specific sites, illegal activity, or personal hobbies during work hours, as well as offline such as using company hardware for personal gain. This is a document that is absolutely required for every company in order to protect the company from the consequences of certain employee activity.

Answer: hello your question is incomplete attached below is the complete question

answer :

A set() method (non-constructor mutator). ( B )

Explanation:

The type of class methods that is necessary to filter bad arguments to protect private data of your class using validators is :

A set() method (non-constructor mutator)

Answer:

a) 20 users

b) 0.1  or 1/10

c) P ( X = n )   =   [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

d) 0.008

Explanation:

Given data:

Link shared by users = 3 Mbps

each user requires ; 150 kbps

percentage transmitted by each user = 10%

a) Determine the number of users can be supported

number of users = 3 Mbps / 150 kbps = 3000 / 150 = 20 users

b) P( user is transmitting )

given that percentage transmitted by each user = 10%

since packet switching is used ; P ( user is transmitting ) = 10% = 0.1

c) P ( n users are transmitting simultaneously )

let the number of users ( i.e. N ) = 120

number transmitting = n

P ( user is transmitting ) = 0.10

using Binomial distribution

P ( X = n ) = [tex]^{N}[/tex]Cₙ ( P )ⁿ ( 1 - P )^[tex]^{N-n}[/tex]

                = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

d) P( X ≥ 21 transmitting simultaneously )

P ( X = n ) = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

Therefore ; P( X ≥ 21 ) = 1 - P( X ≤ 20 )

                                   = 1 - BINOMDIST(20,120,0.1,1)  ( excel function )

∴ P( X ≥ 21 ) = 1 - 0.992059 ≈ 0.008

Answer:

A computing system can be referred to as a combination of hardware and software forms created to intentionally interact in specific ways such that the combination of both is able to achieve certain tasks.

Explanation:

Whilst a hardware refers to all the visible parts of the computing system such as the Visual Display Monitor or Screen, Keypads or Keyboards, Mouse and other input devices such as the camera, storage devices etc, the Software refers to intangible part - the logical instructions (machine language) which instructions the hardware on what or what not to do.

Cheers