Answer: Option D.
Transport water from roots to leaves.
Explanation:
This is because xylem is one of the vascular tissues in plants that consist of specialized conducting cells known as treachery elements which transport water and other nutrients from the root to stem and the leaves of plants. It also give physical support to plants or give strength to plants.
If 0.45 liters of water is formed during the combustion of propane, how many liters of carbon dioxide are formed?
will give you brainiest
Which of the following is an example that a chemical reaction has occurred?
A. Cut piece of lumber into two pieces
B. Bubbling/fizzing
C. Phase change (ex. solid changes to liquid)
D. Iron being melted
NEED HELP ASPA WILL MAKE THE BRAINIEST ANSWER
A student captures 0.50
moles of hydrogen (H2), oxygen (O2), chlorine (Cl2), carbon dioscide (CO2), and carbon monoxide (CO) gas in separate, evacuated flasks.
Arrange the flasks of gases in order of increasing grams of gas.
.H
H
H2
H2
Answer: [tex]H_2[/tex] < [tex]CO[/tex] < [tex]O_2[/tex] < [tex]CO_2[/tex] < [tex]CL_2[/tex]
Explanation:
According to avogadro's law, 1 mole of every substanceweighs equal to its molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
1. Mass of [tex]H_2=moles\times {\text {Molar mass}}=0.50moles\times 2g/mol=1g[/tex]
2. Mass of [tex]O_2=moles\times {\text {Molar mass}}=0.50moles\times 32g/mol=16g[/tex]
3. Mass of [tex]Cl_2=moles\times {\text {Molar mass}}=0.50moles\times 71g/mol=35.5g[/tex]
4. Mass of [tex]CO_2=moles\times {\text {Molar mass}}=0.50moles\times 44g/mol=22g[/tex]
5. Mass of [tex]CO=moles\times {\text {Molar mass}}=0.50moles\times 28g/mol=14g[/tex]
Thus the flasks of gases in order of increasing grams of gas is:
[tex]H_2[/tex] < [tex]CO[/tex] < [tex]O_2[/tex] < [tex]CO_2[/tex] < [tex]CL_2[/tex]
I have to write the balanced equation
A nickel is placed in a cup of boiling water. Predict whether a solution will form.
I really don’t know
A force that is opposite to motion of a falling object?
Answer:
Sliding friction: A friction force that opposes the motion of an objects as it slides over a surface.
En la ecuación: Fe2O3 + CO = Fe + CO2.
El agente reductor es:
a)oxido ferrico
b)dióxido de carbono
c)monóxido de carbono
d)hierro
Answer:
English please
Explanation:
formula for trichlorine tetroxide
Answer:
*Chlorine trioxide is ClO3
Explanation:
How much water has to be evacuated from 250ml of 1M Ca(OH)2 to make it 3M
Answer:
ERROR
Explanation:
Answer could not be show due to technical difficulties
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. The volume of 3M diluted solution of calcium hydroxide is 83.3ml.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
According to the neutralization law,
M₁V₁=M₂V₂
where,
M₁ = molarity of stock solution = 1 M
V₁ = volume of stock solution = 250ml
M₂ = molarity of dilute solution =3M
V₂ = volume of dilute solution = ?
substituting all the given values we get
M₁V₁=M₂V₂
1 M×250ml=3M×V₂
V₂=83.3ml
Therefore, volume of 3M diluted solution of calcium hydroxide is 83.3ml.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
C5H12 + O2 = CO2 + H2O
If 84.3 grams of C5H12 react according to the above equation and the % yield is 94% find the actual yield of grams of carbon dioxide
Answer: 241.6 grams of CO2
Explanation: you take 84.3 grams C5H12 and divide it by 72.15 grams of C5H12(which is the molar mass) you take that answer and calculate the mols of CO2 by multiplying the 1.168 you got before and multiply it by 5. You take the answer you get from that and multiply it by the molar mass of CO2 and get the theoretical yield and then you just plug it in. 94= (x/257.02)x100 and solve to find x which is the actual yield.
newtons 1st law is also called what?
Answer: Newton's first law is often called the law of inertia
Explanation:
How does a limiting reagent affect how much product is formed?
O A. The amount of product will be limited by the molar mass of the
limiting reagent
B. The amount of product will be limited by the sum of the reactant
coefficients.
C. The amount of product will be limited by the number of moles of
the limiting reagent.
D. The amount of product will be limited by leftover amounts of other
reactants.
Answer:
C. The amount of product will be limited by the number of moles of
the limiting reagent.
Explanation:
a p e x :)) i just took the quiz
The amount of product will be limited by the number of moles of
the limiting reagent. Hence, option C is correct.
What is a Limiting reagent?The reactant that gets consumed early in the reaction restricts the quantity of product which will be produced in the chemical reaction. Thus, the reactant that gets consumed early in a chemical reaction is a limiting reagent.
Hence, the amount of product will be limited by the number of moles of the limiting reagent.
Learn more about limiting reagents:
brainly.com/question/14225536
#SPJ5
If 5.025 grams of NaOH are dissolved in 2.4 liters of water, what is the Molarity of the solution?
Answer:
0.052 M.
Explanation:
Hello!
In this case, since the molarity is computed by dividing the moles of the solute by the volume of the solution in liters (M=n/V), we first need to compute the moles in 5.025 grams of NaOH as shown below:
[tex]n=5.025g*\frac{1mol}{40.0g}\\\\n=0.126mol[/tex]
In such a way, we compute the molarity as show below:
[tex]M=\frac{0.126mol}{2.4L}\\\\M=0.052M[/tex]
Best regards!
Write the formula of the conjugate base of the Brønsted-Lowry acic, HF
Answer:
Furthermore, because hydrofluoric acid, HF, loses a proton, H+1, to generate its conjugate in the reaction that is shown above, this reactant can be classified as a Brønsted-Lowry acid, and, consequently, the fluoride ion, F–1, is the conjugate base of this acid.
Explanation:
hope this helps
The formula of the conjugate base of the Bronsted-Lowry acid, HF is represented as F⁻.
What is the Bronsted-Lowry concept?The Bronsted-Lowry theory can be described as an acid-base reaction where acid and base react with each other and by an exchange of proton acid, produces its conjugate base and the base creates its conjugate acid.
The Bronsted-Lowry concept is actually an extended version of Arrhenius's theory of acid base. According to the Bronsted-Lowry concept, acid is a substance that donates a hydrogen ion or a proton and forms its conjugate base and the base is a substance that accepts proton and produces its conjugate acid.
Bronsted-Lowry acid can be represented as:
Acid ⇄ Conjugate base + H⁺
The conjugate base of Bronsted-Lowry acid HF can be represented as follows:
HF ⇄ F⁻ + H⁺
Therefore, fluoride ion F⁻ is the conjugate base of the Bronsted-Lowry acid HF.
Learn more about the Bronsted-Lowry concept, here:
https://brainly.com/question/14407412
#SPJ6
how does a decrease in potential energy during a chemical rwaction relate to the temperature of the surroundings
Answer: If the potential energy of the reaction system decreases, then kinetic energy in the surroundings increases and the temperature of the surroundings rises
Explanation:
The decrease in the potential energy results in an increase in the temperature of the system and surroundings.
Mechanical energy has been described as the sum of the kinetic and the potential energy in the system. With the increase in the potential energy, there has been a decrease in the kinetic energy and vice versa.
The decrease in the potential energy results in an increase in the kinetic energy of the system. The kinetic energy has been termed as the energy of performing work. The rise in the kinetic energy results in an increase in the work done in the system and there has been an increase in the temperature of the system.
Thus, the decrease in the potential energy results in an increase in the temperature of the system and surroundings.
For more information about the potential energy, refer to the link:
https://brainly.com/question/21288807
An experiment shows that a 250 −mL gas sample has a mass of 0.436 g at a pressure of 742 mmHg and a temperature of 27 ∘C.
What is the molar mass of the gas?
Answer:
41.9 g/ mol hope that helps you out
Explanation:
d=p.m/ r.t
please fill this formula
I need help with both parts, ill give brainliest and 30 points
Part A: What changes does sugar undergo when heated in a spoon over the flame?
Select one:
A. A physical change, then a chemical change
B. Two physical changes
C. Two chemical changes
D. A chemical change, then a physical change
Part B: What evidence from the experiment and data table best supports your answer to Part A? Use information from the stimulus material and your knowledge of science to support your answer. In your answer, be sure to:
Desribe the evidence that supports your answer to Part A.
Provide your reasoning why that evidence supports your answer to Part A.
Answer:
part a=A. A physical change, then a chemical change
part b:evidence
without physical change any sorts of chemical change do not take place.
for example: when sugar is heated on spoon the physical change takes place in sugar .sugar starts to form liquid from solid.
Answer:
Part A. C would be your answer I think
Sugar is made of carbon, hydrogen and oxygen atoms. When heated over a candle, these elements react with the fire to turn into a liquid. The heat causes the sugar's atoms to combine with the oxygen in the air, forming new groups of atoms. Energy is released in this chemical reaction in the form of smoke and black soot.
Part B. I don't know I just think of the answer... Meaning I'm good and science, Chemistry and all that good stuff ;-;
Explanation:
Question 3 (0.05 points)
Fixed metals are metals in representative elements, plus three metals in transition
elements: Zn, Ag, Cd. Variable metals are metals in transition elements, except Zn,
Ag, and Cd. What is the different between the names of ionic compounds containing
fixed metal and those containing variable metals?
A) Ionic compounds containing variable metals should have Roman numerals
CD B) lonic compounds containing fixed metals should have prefixes
C) lonic compounds containing fixed metals should have Roman numerals
Pleaseeeeeee helppppppp
Answer:
A) Ionic compounds containing variable metals should have Roman numerals
Explanation:
The correct option is;
A) Ionic compounds containing variable metals should have Roman numerals
This is because these variable metals have variable oxidation states and charges. Hence, to be able to distinguish between compounds containing the same element but different charges, the roman numerals is used. For example;
FeCl₃ - Iron(III) Chloride
FeCl₂ - Iron(II) Chloride
which is colder, -30.0 F or 225.0 K?
Answer:
-30.0 F
Explanation:
225 K is - 48.15 Celsius
-30.0 F is - 1 Celcius
Suppose a student repeats a measurement two times and then calculates the standard deviation. Because the standard deviation is small, the student reports that their experiment was extremely precise. Is the student's conclusion appropriate?
A) No, because there were not enough measurements to use standard deviation.
B) Yes, because a small standard deviation indicates greater precision
C) Yes, because a small data set always has excellent precision
D) No, because a large standard deviation indicates greater precision
Answer:b
Explanation:
Does anyone know the answers for these
Answer: 1. 0.045moles
2. 2.10 grams
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
1. [tex]\text{Number of moles of zinc nitrate}=\frac{8.51g}{189.36g/mol}=0.045moles[/tex]
2. Mass of [tex]C_2H_4=moles\times {\text {Molar mass}}=0.075moles\times 28.05g/mol=2.10g[/tex]
Naming lonic Compounds
Name the following lonic Compounds using the lonic naming rules. Remember, place the metal's name
first, followed by the non-metal element, replacing the ending with ide"
1.SrBr,
2.NaCl
3. Mgs
4. LIP
5. Ko
6. Ca N,
7. Balz
Answer:
1.storantium bromide
2.sodium chloride
3.magnesium sulphide
4.lithium polymer
5.potassium hydroxide
6.calcium nitride
7.it decomposition of tetrafluroborates and hexaflurophosphates
There are six elements that are common to all
Answer:
earth air water
Explanation:
Ionic compounds form because ___ charges attract
Answer:
Ionic bonding is the attraction between positively- and negatively-charged ions. These oppositely charged ions attract each other to form ionic networks (or lattices). Electrostatics explains why this happens: opposite charges attract and like charges repel.
Explanation:
Ionic compounds form because opposite charges attract.
In an ionic compound, positive and negative ions come together to form a stable structure. This occurs when an atom loses electrons to become a positively charged ion (cation) and another atom gains those electrons to become a negatively charged ion (anion). The positive and negative charges of the ions attract each other, resulting in the formation of an ionic bond.
This attraction between positive and negative charges is what holds ionic compounds together. The strong electrostatic forces of attraction between ions result in a lattice structure, where each ion is surrounded by oppositely charged ions.
Thus, ionic compounds are formed because opposite charges attract.
Learn more about ionic bond,here:
https://brainly.com/question/9075398
#SPJ6
Why do not all rock types contain fossils?
Excessive heat and pressure can destroy fossils.
Fossils can only be created in certain places around the world.
Fossils cannot be created near volcanoes.
Fossils are too large to be found in igneous and metamorphic rocks.
Answer:
Igneous rocks form from molten rock, and rarely have fossils in them. Metamorphic rocks have been put under great pressure, heated, squashed or stretched, and fossils do not usually survive these extreme conditions. Generally it is only sedimentary rocks that contain fossils.
Explanation:
Hope it helps, some how.
Solder is a silver metal used to hold pipes together. When the solder is heated, it melts and acts as a type of metal "glue." Mrs. Hanley heats a piece of solder until it melts between two pipes. What best identifies the point at which a physical change first takes place?
A)when the solder melts
B)when the solder cools down
C)when the solder is a soft metal
D)when the solder becomes solid again
Answer:
A
Explanation:
Reactants are on the left side of the equatio. Arrow true or false
An ore sample is found to contain 10.500000 g of cobalt and 87.3 g waste rock (gangue). What is the
percent by mass of cobalt in the ore?
Answer:
[tex]\% Co=10.7\%[/tex]
Explanation:
Hello!
In this case, since this is a mixture composed by cobalt and waste rock, we can compute the percent by mass of cobalt as shown below:
[tex]\% Co=\frac{m_{Co}}{m_{Co}+m_{waste}} *100\%\\\\[/tex]
Thus, we plug in to obtain:
[tex]\% Co=\frac{10.500000g}{10.500000g+87.3} *100\%\\\\\% Co=10.7\%[/tex]
Best regards!
If the initial temperature of a movable cylinder was 130 degrees Celsius
with a pressure of 1 ATM and an initial volume of 2 Liters, what would
the new volume be if the temperature was lowered to 324 degrees Kelvin
and the pressure was raised to 1.1 ATM?
Answer: The new volume will be 1.5 L
Explanation:
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 1 atm
[tex]P_2[/tex] = final pressure of gas = 1.1 atm
[tex]V_1[/tex] = initial volume of gas = 2 L
[tex]V_2[/tex] = final volume of gas = ?
[tex]T_1[/tex] = initial temperature of gas = [tex]130^0C=(130+273)K=403K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]324K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{1\times 2}{403}=\frac{1.1\times V_2}{324}[/tex]
[tex]V_2=1.5L[/tex]
The new volume will be 1.5 L