The function of these materials you utilized in the lesson is bacteria, gene, recombinant DNA technology, plasmid vector, and protein expression system. We have employed a bacterium to propagate a gene that makes a specific plant protein that may hold a cure for stomach cancer.
What Is Protein?Protein makes up the majority of the body's organs, tissues, and body parts, include muscle, bone, skin, or hair. It aids in the production of hemoglobin, which transports oxygen in the blood, and enzymes, which fuel a variety of chemical reactions. The majority of the body's organs, tissues, and body parts, including muscle, bone, skin, and hair, are made of protein. It aids in the production of hemoglobin, which transports oxygen in the blood, and enzymes, which fuel a variety of chemical reactions. At least 10,000 different proteins make up you, and they also keep reader that way.
What is the role of protein?Every cell in the human body has protein. To repair damaged cells and create new ones, your body needs protein in your diet. For toddlers, teenagers, and expectant women to develop properly and expand to their full potential, protein is crucial. It accelerates metabolic reactions, synchronizes biological processes, and promotes tissue growth and repair. Proteins give your body its structural support and ensure optimal pH and fluid equilibration.
To know more about Protein visit:
https://brainly.com/question/29776206
#SPJ4
For the Kuhn segment of many polymers, (b/d) ≈ 2–3. Polystyrene is known to have a Kuhn length b = 0.7 nm and a θ-temperature of 34.5 ◦C in cyclohexane. (i) At a temperature of T = 80 ◦C, does cyclohexane act as a good solvent or an athermal solvent? Justify your answer mathematically. (ii) What is the value of T above which the system is athermal? Given the boiling point of cyclohexane, is this accessible under standard conditions (P = 1 atm)?
5. For the Kuhn segment of many polymers, (b/d)≈ 2-3. Polystyrene is known to have a Kuhn length b=0.7 nm and a 6-temperature of 34.5 °C in cyclohexane.
(i) At a temperature of T = 80 °C, does cyclohexane act as a good solvent or an athermal solvent? Justify your answer mathematically.
(ii) What is the value of T above which the system is athermal? Given the boiling point of cyclohexane, is this accessible under standard conditions (P=1 atm)?
(i) Cyclohexane acts as a good solvent at a temperature of T = 80 °C because it is above the θ-temperature of 34.5 °C.(ii) The value of T above which the system is athermal is the θ-temperature, which is 34.5 °C for polystyrene in cyclohexane.
i) In a good solvent, the polymer coils expand and the polymer-solvent interactions are stronger than the polymer-polymer interactions.
Therefore, Cyclohexane acts as a good solvent at a temperature of T = 80 °C because it is above the θ-temperature of 34.5 °C.
This can be mathematically justified by the Flory-Huggins equation: χ = (V1/RT)(ΔH - TΔS)
where χ is the Flory-Huggins interaction parameter, V1 is the molar volume of the solvent, R is the gas constant, T is the temperature, ΔH is the enthalpy of mixing, and ΔS is the entropy of mixing.
At temperatures above the θ-temperature, χ is negative, indicating that the polymer-solvent interactions are stronger than the polymer-polymer interactions and the solvent is a good solvent.
(ii) The value of T above which the system is athermal is the θ-temperature, which is 34.5 °C for polystyrene in cyclohexane.
Above this temperature, the polymer-solvent interactions are stronger than the polymer-polymer interactions and the solvent is a good solvent.
The boiling point of cyclohexane is 80.7 °C, so this temperature is accessible under standard conditions (P=1 atm).
To know more about solvents, refer here:
https://brainly.com/question/30452436#
#SPJ11
Is hydrogen found in a natural abundance
Yes, hydrogen found in a natural abundance, hydrogen is easily the most abundant element in the universe.
Why is hydrogen the most abundant in nature?Hydrogen the most abundant in nature because hydrogen is the simplest element in the universe, with only one proton and one electron ,it is the only element without a neutron.
The element hydrogen is by far the most abundant in the universe. It can be found in the sun and most stars, and the planet Jupiter is mostly made up of hydrogen. Water is the most abundant form of hydrogen on Earth.
Thus, hydrogen found in a natural abundance.
To learn more about the hydrogen, follow the link;
https://brainly.com/question/28937951
#SPJ9
or which of the following molecules would the intermolecular forces be influenced mainly by hydrogen bonding? BrF5 C2H5OH H2S CH3NH INFLUENCE OR NOT
The molecules that would have the intermolecular forces be influenced mainly by the hydrogen bonding is C₂H₅OH , CH₃NH₂.
The Hydrogen bonding is the special type of the dipole-dipole attraction between the molecules, but not the covalent bond to the hydrogen atom. It will results from the attractive force in between the hydrogen atom that are covalently bonded to the more electronegative atom such as the N, O, or F atom and the another very electronegative atom. The hydrogen bonding, is the interaction that involves a hydrogen atom that is located in between a pair of the other atoms having the high affinity for the electrons
Thus, C₂H₅OH , CH₃NH₂ both molecules influenced by the hydrogen bonding.
To learn more about hydrogen bonding here
https://brainly.com/question/12514139
#SPJ4
Which line represents the motion of the cathode ray in an electric field?
The line that represents the motion of the cathode ray in an electric field is line A.
The correct option is C.
What are cathode rays?Electron streams can be seen in discharge tubes as cathode rays or electron beams. When a voltage is applied to an evacuated glass tube with two electrodes, it can be seen that the glass behind the positive electrode glows as a result of the cathode's emission of electrons.
Cathode rays are deflected to the positive electrode.
Learn more about cathode rays at: https://brainly.com/question/4441361
#SPJ1
ompound x is found to have a molar mass of 1000.7 g /mol. find the number of moles in 25.1085 g of x. make sure you include the right number of significant figures. answer
Number of moles = 0.0250839 mol (rounded to 7 significant figures) of compound X in 25.1085 g, we need to divide the given mass by the molar mass of X.
Using the given molar mass, we have calculated the number of moles of X in 25.1085 g to be 0.0250839 mol. We should round this value to the appropriate number of significant figures based on the given data. Since the mass is given to 7 significant figures.
Molar mass is the mass of one mole of a substance, usually expressed in units of grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms in a molecule.
The molar mass of an element is equal to its atomic mass in grams per mole. For example, the molar mass of carbon is 12.01 g/mol, which is the atomic mass of carbon rounded to two decimal places.
Number of moles = Mass ÷ Molar mass
Number of moles = 25.1085 g ÷ 1000.7 g/mol
Number of moles = 0.0250839 mol
To know more about moles here
https://brainly.com/question/24748125
#SPJ4
The principal quantum number refers to the size and energy level of the outer orbital. The principal quantum number for Li is _____, whereas the principal quantum number for Fr is _______.A) 1; 6B) 2; 6C) 1; 7D) 2; 7E) 7; 2
The principal quantum number refers to the size and energy level of the outer orbital. The principal quantum number for Li is 2, whereas the principal quantum number for Fr is 7. The correct answer is D.
The principal quantum number (n) is a quantum number that describes the energy level of an electron in an atom. It also indicates the size of the electron cloud around the nucleus. The higher the value of n, the higher the energy level and the larger the electron cloud.
The atomic number of Li (Lithium) is 3, which means that it has 3 protons and 3 electrons in its neutral state. The electron configuration of Li is 1s2 2s1. The outermost electron in Li is located in the n=2 energy level.
Therefore, the principal quantum number for Lithium is 2.
The atomic number of Fr (Francium) is 87, which means that it has 87 protons and 87 electrons in its neutral state. The electron configuration of Fr is [Rn] 7s1. The outermost electron in Fr is located in the n=7 energy level.
Therefore, the principal quantum number for Francium is 7.
To learn more about quantum number visit: https://brainly.com/question/2292596
#SPJ4
Which of the following will decrease the rate of dissolution of a gas in a liquid?
a
increase pressure
b
decrease agitation
c
increase temperature
(30 points)
According to the forces of attraction , decreasing agitation will decrease the rate of dissolution of a gas in a liquid.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
Learn more about forces of attraction,here:
https://brainly.com/question/9189639
#SPJ1
from the pre-lab videos and your experience in the lab, rationalize what would happen if you used phenolphthalein instead of bromocresol green for standardizing hcl.
Using phenolphthalein instead of bromocresol green for standardizing HCl would likely give a different endpoint and thus a different titration result.
What does it mean to standardize a solution?This refers to the the process of getting the exact concentration (molarity) of a solution. Titration is one type of analytical methods often used in standardization. During a titration, an exact volume of one substance is reacted with a known amount of another substance.
Phenolphthalein has a different pH range for its color change (8.2-10.0) compared to bromocresol green (3.8-5.4), which could lead to different titration endpoints and result in an inaccurate determination of the concentration of HCl. Therefore, it is important to use the indicator specified in the experimental protocol to ensure accurate and precise results.
Learn more about phenolphthalein on
https://brainly.com/question/14804470
#SPJ1
Predict the missing component in the nuclear equation.
The reaction here is a beta decay and the missing component is 137/56 Ba
What is a beta decay?Beta decay is a type of radioactive decay in which an unstable atomic nucleus releases a beta particle, which is an electron or a positron, in order to become more stable.
Beta decay occurs when the neutron-to-proton ratio in the nucleus is too high, and the nucleus transforms into a more stable configuration by releasing a beta particle.
Thus the beta decay would give a daughter nuclei that has the mass number greater than that of the parent by one unit.
Learn more about beta decay:https://brainly.com/question/25455333
#SPJ1
fill in the blank. if dissociation of mgcl2 in water were 100%, the van`t hoff factor would be___; however, for real solutions the van`t hoff factor for mgcl2 is (greater than, less than) this value.
If dissociation of mgcl2 in water were 100%, the van`t hoff factor would be 3 (three); however, for real solutions the van`t hoff factor for mgcl2 is (greater than, less than) this value.
MgCl2 dissociates into three ions when it dissolves in water, giving it a theoretical van't Hoff factor of 3. The van't Hoff factor for MgCl2 is normally tested at a value of no more than 2.7.
The van't hoff factor for magnesium chloride is 3. The letter I stands for the Van't Hoff factor. One magnesium cation and two chloride ions make up the last three ions formed when magnesium chloride separates. Consequently, the magnesium chloride van't hoff factor is equal to 3.
A solute's impact on associated properties, such as osmotic pressure, relative vapor pressure reduction, boiling-point elevation, and freezing-point depression, is measured by the van 't Hoff factor i.
To know about the van't hoff factor
https://brainly.com/question/21854669
#SPJ4
Calculate the following quantity: volume in liters of 0.143 manganese (II) sulfate that contains 73.0g of solute.
Volume in liters of 0.143 manganese (II) sulfate that contains 73.0g of solute is 3.35L. Volume is a three-dimensional spatial measurement.
What is volume?Volume is a three-dimensional spatial measurement. It is frequently mathematically quantified using SI generated units (such as the cubic metre and litre) as well as different imperial either Us or customary equivalents (such as the gallon, quart, cubic inch). Volume is connected to the notion of length (cubed).
number of moles = 73.0g/ 151=0.48mol
molarity = number of mole/ volume of solution in litre
0.143=0.48/volume of solution in litre
volume of solution in litre=0.48/ 0.143=3.35L
Therefore, 3.35L is the volume of the solution.
To learn more about volume, here:
https://brainly.com/question/23477586
#SPJ1
Which statement is true concerning the standard states of Cl2(g), K(s) and KCl(aq)?
Group of answer choices
The standard state for Cl2(g) is the pure gas at 1 atm, for K(s) is the pure solid at 1 atm, and for KCl(aq) is the solution at a concentration of 1 mol/L.
The standard state for Cl2(g) is the pure gas, for K(s) is the pure solid, and for KCl(aq) is the solution.
The standard state for Cl2(g) is the pure gas at 1 atm, for K(s) is the pure solid at a concentration of 1 mol/L at 1 atm, and for KCl(aq) is the solution at a concentration of 1 mol/L.
The standard state for Cl2(g) is the pure gas at a concentration of 1 mol/L, for K(s) is the pure solid at 1 atm, and for KCl(aq) is the solution at 1 atm.
Since the standard state for gases is the situation of the gas at 1 atm and the standard state for solids and liquids is the form at a 1M concentration, option C is the best choice.
What does chemistry mean by concentration?The concentration of a substance is the quantity of solute in a given volume of solution. Molarity, which is the number of moles of solvent in 1 L of solution, is used to express concentrations.
What does a solution's concentration mean?The quantity of solute that was dissolved in a certain volume of the solvent or fluid is measured by the solution's concentration. A solution that contains a significant concentration of dissolved solute is said to be concentrated.
To know more about Concentration visit:
https://brainly.com/question/28564792
#SPJ4
use the scale below to determine the ph value of the water, and determine whether the water is acidic, alkaline, or neutral. then predict what will happen to the ph if someone were to place a straw into the water and blow.
The pH strip is used to test the pH of a solution. The pH of water is neutral which is around 7.
The pH is known as the power of hydrogen. The pH is used to measure the degree of basicity and acidity of a solution. The amount of hydrogen ion concentration in a solution determines the pH of the solution. Mathematically, pH is given by the formula:
pH -= -log [H⁺]
The pH strip is a strip of litmus paper with which a person can measure the pH value of a liquid solution. The substance in the pH paper causes the paper to show a different color at different acidity values.
To learn more about pH check the link below:
https://brainly.com/question/172153
#SPJ4
Below are the reduction half reactions for chemolithoautotrophic denitrification, where hydrogen is a source of electrons and energy and nitrate is the terminal electron acceptor.
NO3- + 10e- -> N2 (E0 = +0.74 V)
H+ + 2e- -> H2 (E0 = -0.42 V)
If you balance and combine the reactions so that 145 molecules of H2 gas are oxidized to H+, how many molecules of N2 gas will be produced??
Below are the reduction half reactions for chemolithoautotrophic denitrification, where hydrogen is a source of electrons and energy and nitrate is the terminal electron acceptor.
NO3- + 10e- -> N2 (E0 = +0.74 V)
H+ + 2e- -> H2 (E0 = -0.42 V)
If you balance and combine the reactions so that 200 molecules of H2 gas are oxidized to H+, how many electrons will be transferred from hydrogen to nitrogen?
Below are the half reactions for sulfate reduction using acetate as a source of electrons, energy, and carbon.
CO2 + 8e- -> CH3COO- (-0.29 volts)
SO42- + 8e- -> H2S (-0.22 volts)
If you balance and combine the reactions so that 48 molecules of CH3COO- are oxidized to CO2, how many molecules of water will be produced?
Balance the half-reactions to guarantee that the number of electrons transferred in both reactions is the same:
NO3- + 8H+ + 10e- N2 + 4H2O H2 2H+ + 2e- NO3- + 8H+ + 10e-
The next step is to figure out how many electrons are moved when 145 molecules of H2 are oxidized. We can see from the balanced equation for the H2 half-reaction that 1 molecule of H2 makes 2 electrons:
2H+ + 2e- → H2
As a result, 145 molecules of H2 will yield:
145 molecular units H2 has two protons per molecule. 290 electrons Equals H2
Finally, we can use the denitrification reaction balanced equation to calculate how many molecules of N2 are created for 290 electrons:
1 molecule of N2 is produced by 10 electrons.
Therefore, 1 molecule N2 290 electrons/10 electrons = 29 molecules N2
29 molecules of N2 gas will be created.
To answer the second query, we must balance the half-reactions:
SO42- + 8H+ + 8e- H2S + 4H2O CO2 + 8H+ + 8e- CH3COO- + 2H2O SO42- + 8H+ + 8e- H2S + 4H2O
The balanced formulae show that 8 electrons are transferred in both half-reactions. As a result, in order to oxidize 48 molecules of CH3COO-, 6 molecules of SO42- must be reduced:
There are 48 nuclei CH3COO- 8 electrons per atom 384 protons = CH3CO-
384 electrons (eight electrons per atom) 48 units of SO42- SO42-
As a result, 48 molecules of CH3COO- reduced to CO2 will yield:
six electrons 4 H2O/molecule SO42- 24 units of SO42- H2O
The answer is that 24 molecules of water will be created.
Learn more Reduction reactions
https://brainly.com/question/19528268
#SPJ4
Which of the following would be considered to be supersaturated if 40g of solute were dissolved at 60ºC?
a
KCl
b
KClO3
c
NaCl
(30 points)
KCl would be considered to be supersaturated if 40g of solute were dissolved at 60ºC.
Option A is correct.
What is a supersaturated solution?A supersaturated solution is described as a solution that contains more than the average solvent that can be dissolved at a given temperature
At 60ºC, the solubility of KCl is about 42g/100mL of water. Therefore, since we have 40g of KCl that were dissolved in less than 100mL of water, the solution would be supersaturated.
In conclusion, supersaturation occurs with a solution when the concentration of a solute exceeds the concentration specified by the value of solubility at equilibrium.
Learn more about a supersaturated solution at: https://brainly.com/question/17592745
#SPJ1
Use the information in the table below to answer the question that follows:
If an electromagnetic wave traveled through each of the media (materials) above, which medium (material) is most likely a solid?
Material 1
Material 2
Material 3
Material 4
The medium (material) with the fastest electromagnetic wave speed, material 1, with a speed of 3.0 108 m/s, would be the one that is most likely a solid.
What types of waves can penetrate a solid?A P wave. The P wave, or main wave, is the initial type of body wave. It is the type of seismic wave that travels the fastest and arrives first at a seismic station.
A solid item can light waves flow through it?Some photons are absorbed by the atoms in some materials, including metal, preventing light from passing through. These substances are translucent. In different materials, like glass, the Since atoms are unable to absorb photons, light travels through them. These substances are translucent.
To know more about electromagnetic visit:-
https://brainly.com/question/12369229
#SPJ1
which one of the following has the highest standard molar entropy? group of answer choices i2(g) h2(g) cl2(g) i2(s)
Among the options given, Cl2(g) is likely to have the highest standard molar entropy.
The standard molar entropy is a measure of the amount of disorder or randomness in a substance at standard temperature and pressure (STP).
Therefore, the substance with the highest standard molar entropy is likely to be one of the gases, either H2(g), Cl2(g), or I2(g).
Of these options, the diatomic molecule with the highest standard molar entropy is likely to be Cl2(g), as chlorine gas has more atoms than hydrogen gas and less molecular weight than iodine gas.
Therefore, among the options given, Cl2(g) is likely to have the highest standard molar entropy.
Learn more about molar entropy here:
https://brainly.com/question/17176334
#SPJ4
What is the mass in amu of 225g?
135 *10^24amu is the mass of 225g
By amu, what do you mean?
A carbon-12 atom's mass is precisely 1/12 of an atomic mass unit. The nucleus of an atom of carbon-12 contains six neutrons and six protons. It's written as a.m.u or u. (unified). Atomic masses are expressed using this unit of mass. The average of the neutron rest mass and the proton rest mass is 1 a.m.u.
The average mass of an element's atoms expressed in atomic mass units is known as its atomic mass (amu, also known as daltons, D). The mass of each isotope is multiplied by its abundance to produce the atomic mass, which is a weighted average of all the isotopes of that element.
1amu = 1.662 x 10^-24g.
225 grams will be 225/1.662 *10^-24 i.e. 135 *10^24amu
To learn more about atomic mass unit use link below:
https://brainly.com/question/29793336
#SPJ1
Which of the following correctly identifies the intermolecular force represented by A and compares its strength relative to the intermolecular force represented by B? A represents London dispersion forces, which are weaker than the force represented by B. A represents hydrogen bonding, which is weaker than the force represented by B. A represents London dispersion forces, which are stronger than the force represented by B. A represents hydrogen bonding, which is stronger than the force represented by B.
The statement "A represents London dispersion forces, which are weaker than the force represented by B" correctly identifies the intermolecular force represented by A and compares its strength relative to the intermolecular force represented by B.
If we assume that B refers to a general intermolecular force, such as dipole-dipole interactions or hydrogen bonding, then London dispersion forces can be stronger under certain conditions.
This is because London dispersion forces can be significant even between nonpolar molecules, whereas other intermolecular forces are typically only significant between polar molecules. Additionally, the strength of London dispersion forces generally increases with the size of the molecules involved, which can make them relatively stronger in larger, nonpolar molecules compared to other types of intermolecular forces.
In summary, the strength of intermolecular forces depends on a variety of factors, including the nature of the molecules involved, their polarity, and their size. While it's not always the case, London dispersion forces can be stronger than other types of intermolecular forces under certain conditions.
Learn more about London dispersion forces here:
https://brainly.com/question/20514601
#SPJ4
questions/analysis: inhaled vs exhaled air. when we inhale, the air we breathe is comprised of a lot of different gases. for the purpose if this exercise, we are going to focus on oxygen gas, carbon dioxide and water vapor. when we exhale, the same 3 gases are present, but in different amounts. 1) using the internet, estimate the percent o2 and co2 in a breath of fresh air (inhaled air). using volume of the air in the balloon and the ideal gas law formula, calculate the number of moles of o2 and co2 as well as the number of grams of each gas. show all calculations clearly.
There are approximately 0.3392 grams of oxygen and 0.00088 grams of carbon dioxide in a single breath of fresh air.
What is Concentration?
In chemistry, concentration refers to the amount of a substance (solute) that is present in a given volume or mass of another substance (solvent). It is a measure of how much of a particular substance is present in a mixture, solution, or sample.
The concentration of gases in fresh air is approximately 21% oxygen, 0.04% carbon dioxide, and 1-2% water vapor.
To calculate the number of moles of oxygen and carbon dioxide in a breath of fresh air, we need to use the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is its volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
Let's assume that the volume of a single breath of fresh air is 0.5 L at room temperature (25°C or 298 K) and atmospheric pressure (1 atm). We can then use the ideal gas law to calculate the number of moles of oxygen and carbon dioxide:
For oxygen:
PV = nRT
n = PV/RT = (1 atm)(0.21)(0.5 L)/(0.08206 L·atm/mol·K)(298 K) = 0.0106 mol
For carbon dioxide:
PV = nRT
n = PV/RT = (1 atm)(0.0004)(0.5 L)/(0.08206 L·atm/mol·K)(298 K) = 0.00002 mol
So there are approximately 0.0106 moles of oxygen and 0.00002 moles of carbon dioxide in a single breath of fresh air.
To calculate the mass of each gas, we can use the molar mass of each gas:
Using the number of moles we calculated above, we can calculate the mass of each gas:
Mass of oxygen = number of moles x molar mass = 0.0106 mol x 32 g/mol = 0.3392 g
Mass of carbon dioxide = number of moles x molar mass = 0.00002 mol x 44 g/mol = 0.00088 g
So there are approximately 0.3392 grams of oxygen and 0.00088 grams of carbon dioxide in a single breath of fresh air.
It's worth noting that the concentration of gases in exhaled air can vary depending on a number of factors, including the individual's health status, activity level, and surrounding environment.
Learn more about Concentration from given link
https://brainly.com/question/17206790
#SPJ4
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant R. Suppose the osmotic pressure of a certain solution is measured to be 13. atm at an absolute temperature of 330, K. Write an equation that will let you calculate the molarity of this solution. Your equation should contain only symbols. Be sure you define each symbol other than R Your equation:c = __Definitions of your symbols ___ = 13 atm__ = 330 K
The molarity of the solution is approximately 0.00498 M.
The equation to calculate the molarity of the solution would be:
c = (π / (R * T))
where:
c is the molarity of the solution
π is the osmotic pressure of the solution, which is given as 13 atm
R is the gas constant (8.314 J/(mol*K))
T is the absolute temperature, which is given as 330 K
Therefore, substituting the given values, we get:
c = (13 atm) / (8.314 J/(mol*K) * 330 K)
c = 0.00498 M
Learn more about molarity here: https://brainly.com/question/8732513
#SPJ4
click reset. drag the whole (uncut) block of polystyrene onto the material investigation tray. record its mass and volume and calculate the density.
To find the density of the polystyrene block, you will need to follow the steps outlined in the question.
1. Click "Reset" to ensure that the material investigation tray is empty and ready to use.
2. Drag the whole (uncut) block of polystyrene onto the material investigation tray.
3. Record the mass of the polystyrene block. This can typically be found using a scale or balance.
4. Record the volume of the polystyrene block. This can be found by measuring the length, width, and height of the block and multiplying them together.
5. Calculate the density of the polystyrene block by dividing the mass by the volume.
The formula for density is:
Density = Mass/Volume
By following these steps, you will be able to find the density of the polystyrene block. Remember to be accurate in your measurements and calculations to ensure that your results are correct.
To know more about polystyrene block, refer here:
https://brainly.com/question/30965100#
#SPJ11
7. *You have a 1.2 M solution of CaCl, that has a final volume of 0.050 L.
a. How many moles of CaCl₂ are generated in the reaction?
b. How many grams of CaCl₂ are generated in the reaction?
Answer:
A
Explanation:
solution contains 3.5 moles CaCl2/L solution . We need to convert moles CaCl2 to grams.
Hope this helps :)
10) When a resistor of resistance R is connected to a battery of emf & and negligible
internal resistance, the power dissipated in the resistor is P. If the resistor is replaced with a
resistor of resistance 2R, without changing the battery, the power dissipated will be
A. 1/4P
B. 1/2P
C. 2P
D. 4P
When a resistor of resistance R is connected to a battery of emf & and negligible internal resistance, the power dissipated in the resistor is P. If the resistor is replaced with a resistor of resistance 2R, without changing the battery, the power dissipated will be 4P. Therefore, option D is correct.
What is resistance ?The amount by which an object impedes or resists an electric current is referred to as resistance. The flow of electrons is referred to as electric current. Consider an example of a person struggling to move from one shop to another in a crowded market.
When a resistor R is connected to a battery of emf Volt, the energy dissipated in the resistor is P = R V² because the battery is not changed, so energy is directly proportional to resistance. As a result of this relationship, we can conclude that decreasing R causes an increase in P.
Thus, option D is correct.
To learn more about the resistance, follow the link:
https://brainly.com/question/11431009
#SPJ9
Determine the van't Hoff factor for each of the following compounds. For ionic compounds, assume complete dissociation into cations and anions. CsCI ___C10Hg ___Na3PO4 ___
For ionic compounds, assume complete dissociation into cations and anions. CsCI,C10Hg,Na3PO4, are mentioned below.
What is compounds ?
A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single. Different types of compounds are present.
What is ionic compound ?
An ion with a positive charge is a cation, whereas one with a negative charge is an anion.
It is equal to the numbers of ions that form when an ionic compound dissolves.
if i>1, the molecules are said to be dissociated.
if i=1, the molecules have neither associated nor dissociated.
if i<1, the molecules have associated.
CsCl
vant hoff factor i= 2
C₁₀H₈
vant hoff factor i= 1
Na₃Po₄
vant hoff factor i= 3+1= 4.
Therefore, For ionic compounds, assume complete dissociation into cations and anions. CsCI,C10Hg,Na3PO4, are mentioned above.
Learn more about compounds from the given link.
https://brainly.com/question/14782984
#SPJ1
Which of the following is the correct conversion factor (as written) required to convert a distance of 12 mi to feet, if 1 mi=5280 ft? Click the answer you think is right. - 1 mi/5280 ft - 1 mi x 5280 ft - 5280 ft/1 mi
The feet is a standard unit of measurement. It is mainly used to measure the length of a particular object. Here 12 mi is 63,360 feet. The correct option is B.
What is feet?The unit of measurement which is generally used to measure height, length and distance is defined as the feet. The foot is the singular form of feet. It is a non-metric measure unlike meters and centimeters which are metric.
Here 1 mi = 5280 ft
Then,
12 mi = 12 × 5280
= 63,360 feet
Thus the correct option is B.
To know more about feet, visit;
https://brainly.com/question/20961245
#SPJ1
A hockey puck slides along an ice surface shortly after it has left the hockey stick that propelled it. Which of the following free boy diagram best represents the hockey puck?
FN
Ft
Fg
The correct free body diagram for the hockey puck would show all three of these forces acting on it. The diagram would show Fg pointing downward, FN pointing upward, and Ft pointing backward opposite to the direction of the puck's motion.
The free body diagram of the hockey puck sliding along an ice surface shortly after it has left the hockey stick would have the following forces acting on it:
The force of gravity (Fg) pulling the puck downward toward the Earth. The normal force (FN) exerted by the ice surface upward on the puck to prevent it from falling through the ice. The force of friction (Ft) exerted by the ice surface on the puck in the direction opposite to its motion.
To know more about free body diagram here
https://brainly.com/question/30054881
#SPJ4
Which statement about cells and sugar is true?
Answer:
There are many statements that can be made about cells and sugar, but here are three possible options with one true statement:
All cells require sugar to function properly.
Sugar is harmful to cells and should be avoided.
Cells can store excess sugar as fat.
Explanation:
The true statement is: "All cells require sugar to function properly."
the negative electrons are in the outermost orbits and are involved in chemical reactions. they determine the chemical of an atom.
The negative electrons are in the outermost orbits and are involved in chemical reactions. they determine the chemical of an atom. (FALSE)
It should be valence electrons.
Definition of Valence ElectronsIn predicting a chemical reaction that will occur, it is necessary to take into account the number of electrons contained in an atom. In addition, valence electrons play a role in chemical bond formation reactions. Valence electrons are the outermost electrons in atoms which have the highest energy level and are involved in chemical bonds. Valence electrons are located farther from the nucleus of the atom, so that the electrons of one atom can be attracted more or less by the nucleus than the nuclei of other atoms.
An atom tends to be unreactive or stable (inert) so it is difficult to interact with other types of atoms when the valence electrons are fully filled, which resembles s2p6. Meanwhile, an atom tends to be reactive if there is an excess of one or two atoms resembling groups IA, IIA, and IIIA. However, there are also atoms that lack a few electrons, which are called more reactive, such as groups XVIA and XVIIA.
Petrucci R.H., Harwood W.S. and Herring F.G. in General Chemistry in 2002 states that:
" In the main group elements, valence electrons are defined as the electrons in the electron shell with the highest principal quantum number, n."
The number of valence electrons an atom has depends on its electron configuration.
Your question is incomplete but most probably your full question was:
Determine True/False! the negative electrons are in the outermost orbits and are involved in chemical reactions. they determine the chemical of an atom.
Learn more about Valence Electrons at
https://brainly.com/question/371590
#SPJ4
FILL IN THE BLANK. A gas is ____ and assumes _____ of its container whereas a liquid is ____ and assumes _____ of its container.
A gas is compressible and assumes the volume and shape of its container whereas a liquid is not compressible and assumes the shape of a portion of its container.
What is compression?
The process of compression involves gradually reducing the system's volume while increasing pressure and temperature, with or without the possibility of heat transfer. Heat transmission may or may not be achieved during the expansion phase since volume steadily decreases as pressure and temperature fall.
The act, process, or outcome of compressing; the condition of being compressed. Compressing an internal combustion engine's fuel mixture is one example of compressing.
With each advance and retreat of the piston, a four-part cycle of compression takes place inside the cylinder (two strokes per cycle). Compression, discharge, expansion, and intake comprise the cycle's four functional components.
To know more about compression, check the link below:
https://brainly.com/question/7602497
#SPJ4