Answer:
1. The three parts of an atom are:
ProtonsNeutronsElectrons2. A neutron is a particle of an atom with a neutral charge.
Hope this helps!
What unit of measurement would you use to measure from the Milky Way Galaxy to the Andromeda Galaxy?
Answer:
parsecs
Explanation:
The Sun is at a distance of 8.3 kiloparsecs from the centre of the Milky Way system. When dealing with other galaxies or clusters of galaxies, the convenient unit is the megaparsec (1 megaparsec = 1,000,000 parsecs). The distance to the Andromeda Galaxy (Messier 31) is about 0.76 megaparsec.
1. Who conceived of an atomic model in which positive and negative particles were mixed together throughout the entire atom?
A 0.250 L sample of chlorine gas is collected at a pressure of 105.3 kPa and a temperature of 505 K. What will the volume be if the pressure changes to 100.3 kPa and the temperature decreases to 495 K?
Answer:
V2 = 0.257 LExplanation:
T1 = 505 K
P1 = 105.3 kPa = 1.04 atm
V1 = 0.250 L
T2 = 495 K
P2 = 100.3 kPa = 0.990 atm
V2 = ?
P1V1/T1 = P2V2/T2 must be changed to T2P1V1/T1/P2495 x 1.04 x 0.250 ÷ 505 ÷ 0.990 = V2
V2 = 0.257 L
So 0.257 L is the answer!!
Homogenized milk is a colloid. It has been treated to prevent its different components from separating when it stands. When non-homogenized milk stands, the cream rises to the top because it is less dense than the rest of the milk. Which type of mixture is non-homogenized milk? Explain your answer.
Answer:
Heterogeneous mixture
Explanation:
A homogeneous mixture is defined as a mixture in which the constituents of the mixture are uniformly distributed. A typical example of a homogeneous mixture is when a salt is dissolved in water.
A heterogeneous mixture refers to a kind of mixture whereby the composition of the mixture is not uniform. A typically example of a heterogeneous mixture is non-homogenized milk.
Since non-homogenized milk is not homogeneous, the cream rises to the top and separates from the rest of the mixture because the emulsion has not been stabilized. However, homogenized milk is just milk whose emulsion has been stabilized the cream does not separate when left to stand.
Fluorine,chlorine and bromine are all in the same group (group7) of the periodic table because they ______ in a similar way
Hemophilia is a genetic blood disorder. The female parent must carry one copy of the gene for the child to inherit hemophilia. Also, males have a greater probability of getting hemophilia than females.
HELP PLZ
Which type of trait is hemophilia?
sex-linked recessive
multiple allele
environmental
dominant
Answer:
Sex-linked recessive
Explanation:
Male's have a higher chance of getting it than female's just like red-green color blindness.
Answer:
A.
Explanation:
what makes up a molecule of oxygen gas?
Answer:
2 oxygen atoms make oxygen gas
A molecule of oxygen gas is composed of two oxygen atoms chemically bonded together. The symbol for oxygen is "O," and the atomic number is 8, indicating that each oxygen atom has 8 protons in its nucleus.
A covalent bond is a type of chemical bond that occurs between two atoms when they share one or more pairs of electrons. It is a strong bond that holds atoms together to form molecules.
In a covalent bond, atoms share electrons in order to achieve a more stable electron configuration, typically by filling their outermost energy levels (valence shells). By sharing electrons, both atoms involved in the bond can achieve a more stable configuration, similar to the noble gas configuration.
In an oxygen gas molecule, the two oxygen atoms are held together by a covalent bond. Covalent bonds involve the sharing of electron pairs between atoms. In the case of oxygen gas, each oxygen atom shares two electrons with the other oxygen atom, resulting in a stable molecule.
Therefore, a molecule of oxygen gas is made up of two oxygen atoms (O) bonded together by a covalent bond.
For more details regarding oxygen gas, visit:
https://brainly.com/question/1064242
#SPJ6
Which of the following is the most likely global climate change?
a. a decrease in the overall temperature of the Earth
b. an increase in the overall temperature of the Earth
C. an increase in the number of cold climates
d. no change to global climate
What is the pH of a solution with a concentration of 0.01M hydrochloric acid?
Now
[tex]\\ \sf\longrightarrow pH=-log[H^+][/tex]
[tex]\\ \sf\longrightarrow pH=-log10^{-2}[/tex]
[tex]\\ \sf\longrightarrow pH=2[/tex]
Determine the empirical formula for :aluminum compound containing oxygen (alxoy) if 4.78g of al reacts and the total mass after reacting is 6.67g,
The empirical formula for a aluminum compound containing oxygen (AlxOy), if 4.78g of Al reacts is Al3O2.
How to calculate empirical formula?According to this question, 4.78g of Al reacts with oxygen to form a total mass of 6.67g. This means that the mass of oxygen that reacted is 6.67 - 4.78 = 1.89g
Aluminum = 4.78gOxygen = 1.89gFirst, we convert each mass to moles
Al = 4.78 ÷ 27g/mol = 0.17molO = 1.89 ÷ 16g/mol = 0.12molNext, we divide each value by the smallest
Al = 0.17 ÷ 0.12 = 1.42O = 0.12 ÷ 0.12 = 1Multiply each value by 2
Al = 2.8 = 3
O = 2
Therefore, the empirical formula for a aluminum compound containing oxygen (AlxOy), if 4.78g of Al reacts is Al3O2.
Learn more about empirical formula at: https://brainly.com/question/11588623
When 2. 0 mol CO2 is heated at a constant pressure of 1. 25 atm, its temperature increases from 250 K to 277 K. Given that the molar heat capacity of CO2 at constant pressure is 37. 11 JK-1mol-1 , calculate q, ∆ H and ∆ U
Answer: See below
Explanation:
[tex]\mathrm{At \ constant \ pressure \ the \ heat \ generated \ and \ change \ in \ enthalpy \ are \ equal:} \\\begin{aligned}Q &=\Delta H=n C_{p} \Delta T \\&=2 \times(37.11)(277-250) \\&=2003.94 \mathrm{~J} \\Q &=\Delta H=2.0 \times 10^{3} \mathrm{~J}\end{aligned}[/tex]
[tex]\mathrm{Calculate \ the \ change \ in \ internal \ energy:} \\$$\begin{aligned}\Delta H &=\Delta U+\Delta(P V) \\\Delta U &=\Delta H-n R \Delta T \\&=(2003.94)-(2 \times 8.314 \times(277-250)) \\&=(2003.94)-(448.96) \\\Delta U &=1554.98 \mathrm{~J}\end{aligned}[/tex]
32.2 g of ethyl alcohol is dissolved in water to make a 0.50 L
solution. What is the molarity of the solution?
If 32.2 g of ethyl alcohol is dissolved in 0.50 L water to make a solution, the molarity of the solution will be 1.398 mol/L or 1.398 M
Molarity
The molarity of a solution is the ratio of the number of moles of solutes and that of the volume of solvent in the solution.
Mathematically:
Molarity = number of moles/volume in L
Number of moles of 32.2 g ethyl alcohol = mass/molar mass
= 32.2/46.07 = 0.699 moles
Molarity of the solution = 0.699/0.50
= 1.398 mol/L or 1.398 M
More on molarity can be found here: https://brainly.com/question/12127540
There are three subatomic particles found inside atoms. Two of the subatomic particle have a charge of positive or negative. The one particle that does NOT have a charge is the:
proton
neutron
electron
none of the above
Neutrons don't have a charge. They are neutral
Taking into account the definition of ato, proton, neutron and electron, the correct answer is second option: The one particle that does NOT have a charge is the neutron.
You must know the atom is defined as the smallest particle into which an element can be divided without losing its chemical properties.
Atoms are made up of extremely small particles called protons, neutrons, and electrons. Protons and neutrons are in the center of the atom and form the nucleus, while electrons surround the nucleus.
Electrons have a negative charge, while the charge of protons is positive. The only ones that have no electrical charge are neutrons.
In this way, the atomic nucleus has a positive charge in which almost all its mass is concentrated, while around the atomic nucleus, there are a certain number of electrons, negatively charged.
Finally, the correct answer is second option: The one particle that does NOT have a charge is the neutron.
Learn more:
brainly.com/question/1814899?referrer=searchResults brainly.com/question/2449569?referrer=searchResultshttps://brainly.com/question/24445381Which items are true concerning a typical "thermos bottle"?
A. Radiation is hindered by the silver coatings.
B. The silver coatings stop convection losses.
C. Conduction losses are prevented by the vacuum.
D. Convection is not possible because of the vacuum.
E. The glass walls will not conduct heat.
Answer:
A, C, and D!
Explanation:
The items that are true concerning a typical "thermos bottle" are Radiation is hindered by the silver coatings, conduction losses are prevented by the vacuum, and the glass walls will not conduct heat. These are the options A, C, and E.
What is the significance of the radiation?Radiation is significant as it is the movement of heat energy from one place to another and plays a significant role in heat transfer as here in the thermos bottle, the silver coatings on the outside of the bottle help to prevent heat loss due to radiation, and the reflective portions further aid in such a process.
Hence, the items that are true concerning a typical "thermos bottle" are Radiation is hindered by the silver coatings, conduction losses are prevented by the vacuum, and the glass walls will not conduct heat. These are the options A, C, and E.
Learn more about the radiation here.
https://brainly.com/question/13934832
#SPJ2
Bases are sharp and sweet in taste.
TRUE
FALSE
What type of ions have names ending in-ide
Carbon burns in the precence of oxygen to give carbon dioxide.which element equation describes the reaction
Answer:
not going to lie... i suck at science
Explanation:
sorry
7. A sample has 1.70 moles in a volume of 5.8 Lat 25 C. How many liters would be
required for 1.45 L?
Answer:
i think it would 40
Explanation:
1. Find at least 3 elements named after countries
2. Find at least 3 elements named after scientists (and name the scientist)
3. Find 1 element named after a state and 1 after a continent
4. Find 3 elements named after planets
5. Find 1 element that sounds like your name and 1 that sounds like it should be in a comic book
6. Find atleast 5 elements whose symbols do not match their names
7. What is the only letter not appearing on the periodic table as a symbol or part of the symbol?
8. Find the element that makes plumbing pipes. is it a medal, nonmetal or metaloid
9. Find the element that makes glowing signs, what special group is it in?
10. Find the element that makes milk good for your health. is it a metal, nonmetal or metalloid?
Answer:
1. Elements named after Countries or Places
Americium
Am
Made in 1945 at Chicago USA
Berkelium
Bk
Made in 1950 at the University of California, Berkeley, USA
Californium
Cf
Made in 1950 at the University of California, Berkeley, USA
Copper
Cu
The Romans were the biggest users of copper. Their source of copper was the island of Cyprus. Their name for the island was "Cyprium". They called the metal "Aes Cyprium" - metal of Cyprus. The name became shortened to Cyprium which then became "Cuprum" from which copper gains its modern day symbol.
Francium
Fr
Discovered in 1939 at the Curie Institute, Paris, France.
Gallium
Ga
Named after the Latin name for France - Gallia
Germanium
Ge
Discovered in 1886 by a German Chemist - Winkler.
Polonium
Po
Discovered in 1898 by Marie Curie, who was Polish.
Scandium
Sc
Discovered and mined in Scandinavia
Strontium
Sr
Named after Strontian, a small village in the Western Highlands of Scotland.
__________________________________________________________
4. Elements named after Planets
Helium
He
From the Greek word "Helios" - the Sun. In 1868 during an eclipse of the Sun, Scientists observed a spectral line caused by an unknown element. They named the element Helium. Twenty seven years later in 1895, the element was discovered on Earth.
Neptunium
Np
Named after the planet Neptune. Find the position of the three planets Neptune, Pluto, and Uranus in the Solar system. Now find the position in the Periodic Table of the three elements named after these planets...
Plutonium
Pu
Named after the planet Pluto
Uranium
U
Named after the planet Uranus. The element was discovered in 1789, shortly after the discovery of the planet.
Elements named from Mythology
Tantalum
Ta
Named after the Greek mythological king, Tantalus. It was discovered in 1802 and great difficulties were encountered in dissolving its oxide in acid to form salts. It proved to be a tantalizing problem!
Niobium
Nb
Named after Princess Niobe, the daughter of King Tantalus. According to legend, father and daughter were always found together and were very much alike. The two elements Niobium and Tantalum are usually found together in nature and their properties are very similar. Niobium was discovered in North America in 1801 and was originally named Columbium. It was renamed in 1844 after the connections with tantalum was realized. Find the positions of both elements in the periodic table
Thorium
Th
Named after Thor, the Scandinavian God of War and Thunder. It was discovered and named in 1828. Coincidentally, thorium is used today as a nuclear fuel in nuclear weapons and reactors.
Titanium
Ti
Named after Titans, the Greek supermen. Titanium is an extremely strong metal which resists attack by acids.
Vanadium
V
Named after Vandis, the Scandinavian Goddess of Beauty. The salts of vanadium have beautiful colors.
3. Elements named after Famous Scientists
Curium
Cm
Made in 1944 at Chicago. It was named in honor of Marie and Pierre Curie.
Einsteinium
Es
Made in 1952 at the University of California. It was named in honor of Albert Einstein.
Lawrencium
Lw
All of the man-made elements have been made as a result of the Nuclear Age. The majority of these elements were made at the University of California USA, in a machine called the Cyclotron. The Cyclotron was invented by Professor Ernest Lawrence. Lawrencium was made at the University of California in 1961 and named in his honor.
Mendelevium
Md
Made in 1955 at the University of California. It was named after a world famous Russian Chemist Dimitri Mendeleev.
------------------------------------
8. The chemical symbol for lead is Pb, which comes from the Latin word plumbum, meaning "waterworks," referring back to ancient times when the metal was widely used in the construction of water pipes.
**** MORE ANSWERS ARE UNDER THE QUESTION -- Scroll all the way up ****
I hope this helps!
When an electric current is passed through an electrolytic cell, how can we recognise that electrolysis is taking place?
when electric current is passed through an electrolytic cell we can recognise that electrolysis is taking place by :
*there may bubbles of different gases formed on the electrodes.
*if we add vinegar or lime juice we find more bubbles forming
by the we can identify
2Na + 2H2O → 2NaOH+ H2
How many grams of hydrogen are produced if 120 g of Na are available?
5.27 g
269
6900
on
Answer:
5.27
Explanation:
Next, drag the red block back into the water. Hold it underwater, and quickly record the water level before the block rises. Type the correct measurement in the box. The water level with the red block completely underwater is ____ milliliters.
Answer: 29.6 milliliters
Answer:
4.1 ml
Explanation:
What is standard volume
Answer:
brainliest plls
Explanation: The volume of an ideal gas at standard temperature and pressure: 22.414 liters.
Science pls help help
I answered the question in the photo sent
can you please help me im kinda in a hurry thank you
4. Myth: An organism's kingdom only describes physical characteristics.
o Fact:
o Evidence:
5. Myth: Mammals and plants don't belong in the same domain.
o Fact:
o Evidence:
please help and thx nwn
Answer:
4. fact
5.fact
I think this is all fact no evidence
Which of the following is the balanced chemical equation for photosynthesis? a. 6H2O 6CO2 → 6O2 C6H12O6 b. C6H12O6 6O2 → 6H2O 6CO2 c. H2O CO2 → O2 C6H12O6 d. C6H12O6 O2 → H2O CO2.
Green plants need light in order to survive Structures in the leaves absorb light, which in turn, helps plants make their
own tood
Under which color of light will plants be least likely to make food?
red
blue
orange
green
Answer:
The color of light in which plants are less likely to produce food is green.
Explanation:
Photosynthesis is the process by which plants take advantage of sunlight to convert it into chemical energy, necessary to manufacture their nutrients, their growth and development.
Plants do not absorb all the colors of the light spectrum, since due to their pigments they absorb colors with specific wavelengths. Green plants do not absorb the color green, but reflect it —due to the chlorophyll pigment— which gives the green color to those leaves.
For this reason, the light that plants take least advantage of to produce food is green light.
Other options:
The colors blue, orange and red can be absorbed by the plant, to a lesser or greater degree.
Answer:
it would be green
Explanation:
the table below shows some information about 4 orgainc compound P,Q,R, and S
Answer:
paano po yan wala po akong naintindihan sendan niyo po ako ng pic
What is another name for green algae?
A. ferns
B. Chlorophyta
C. bryophytes
D. hornworts
Chlorophyta is another name for green algae.
What is green algae?Green algae is a large and diverse group of photosynthetic organisms that are typically green in color due to the presence of chlorophyll. They are found in a variety of habitats, including freshwater, saltwater, and moist terrestrial environments.
Chlorophyta is a phylum of green algae, which are photosynthetic eukaryotic organisms. They are commonly found in freshwater, but can also be found in marine and terrestrial habitats.
Chlorophyta are characterized by their green pigmentation due to the presence of chlorophyll a and b, as well as other accessory pigments.
Learn about green algae here https://brainly.com/question/800121
#SPJ1
Answer:Chlorophyta
Explanation:
Raj needs to determine the chemical composition of trace evidence like paint and fiber. Which tool would Raj use to do this?
comparison microscope
scanning electron microscope
microspectrophotometer
gas chromatograph
Answer:
gas chromatograph
Explanation:
I took the test and got it right.