Answer:
"Cannot be determined," if that's an answer choice. It depends on the velocities of both objects, since momentum=mass*velocity.
Explanation:
Gravity does not actually "pull" objects at
all, rather gravity is a result of the warping.
or curving, of
A Stars and planets
B. The solar system
C Spacetime
D. Any object
Define speed and what is it’s SI unit.
Object 1 has a momentum of 10 kg m/s and Object 2 has a momentum of 25 kg m/s. Will it be easier to change the direction of movement of Object 1 or of Object 2?
Answer:
I think its object 1
Explanation:
Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.
pls help its already late lol
Answer:
Temperature
Explanation:
Answer:
Gravity
Explanation:
Gravity has nothing to do with weather. Temperature means hot or cold, water is rain and thunder, and wind is if it's in the winter or something like that
What evidence do we have that the moon is receding from Earth?
You are riding in the passenger seat of a car as it goes around a tight turn. You slide across the seat to the passenger side door. Which statement below properly describes what is happening? a. You are exerting a centripetal force on the door. b. The door and seat are exerting a centripetal force on you that balances the centrifugal force of the turn. c. The car seat exerts a centripetal force on you, but not enough to keep you in place, so the door exerts the rest. d. The centrifugal force is greater than the force of friction between you and the seat, so you slide outward.
Answer:
Explanation:
answer C looks good
there isn't really a "centrifugal " force. :/ when we are pushed "back" in a car seat.. it's not because there is a force pushing us backwards... but a force pushing us forwards.. just like when turning too, a force pushes us into the corner, not a force pushing out of the corner. :)
In what order were the following energy sources
discovered by humans
a wave of frequency 10hz forms a stationary wave pattern in a medium where the velocity is 30cm/s. the distance between adjacent nodes is?
Answer:
The ans is 1 not 2
Explanation:
The distance between two adjacent node in a stationary wave is half wavelength π/2 and not full wavelength as in π,so when solving we got 2cm as the wavelength since they ask the dist. Also adjacent nodes you will divide it by 2 and the ans will give u 1cm.
Hope this helps.
A basketball player jumps straight up for a ball. To do this, he lowers his body 0.250 m and then accelerates through this distance by forcefully straightening his legs. This player leaves the floor with a vertical velocity sufficient to carry him 0.960 m above the floor. (a) Calculate his velocity (in m/s) when he leaves the floor. 4.33 Correct: Your answer is correct. m/s (b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.
Answer:
a. 3.73 m/s b. 27.8 m/s²
Explanation:
(a) Calculate his velocity (in m/s) when he leaves the floor.
Using the conservation of energy principles,
Potential energy gained by basketball player = kinetic energy loss of basket ball player
So, ΔU + ΔK = 0
ΔU = -ΔK
mg(h' - h) = -1/2m(v'² - v²)
g(h' - h) = -1/2(v'² - v²) where g = acceleration due to gravity = 9.8 m/s², h' = 0.960 m, h = 0.250 m, v' =0 m/s (since the basketball player momentarily stops at h' = 0.960 m) and v = velocity with which the basketball player leaves the floor
Substituting the values of the variables into the equation, we have
9.8 m/s²(0.960 m - 0.250 m) = -1/2((0 m/s)² - v²)
9.8 m/s²(0.710 m) = -1/2(-v²)
6.958 m²/s² = v²/2
v² = 2 × 6.958 m²/s²
v² = 13.916 m²/s²
v = √(13.916 m²/s²)
v = 3.73 m/s
(b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.
Using v² = u² + 2as where u = initial speed of basketball player before lengthening = 0 m/s, v = final speed of basketball player after lengthening = 3.73 m/s, a = acceleration during lengthening and s = distance moved during lengthening = 0.250 m
So, making, a subject of the formula, we have
a = (v² - u²)/2s
Substituting the values of the variables into the equation, we have
a = ((3.73 m/s)² - (0 m/s)²)/(2 × 0.250 m)
a = (13.913 m²/s² - 0 m²/s²)/(0.50 m)
a = 13.913 m²/s²/(0.50 m)
a = 27.83 m/s²
a ≅ 27.8 m/s²
During a normal reaction to a stressful event, muscles are moved to their maximum capacity, and sensitivity is
Answer:
The paper focuses on the biology of stress and resilience and their biomarkers in humans from the system science perspective. A stressor pushes the physiological system away from its baseline state toward a lower utility state. The physiological system may return toward the original state in one attractor basin but may be shifted to a state in another, lower utility attractor basin. While some physiological changes induced by stressors may benefit health, there is often a chronic wear and tear cost due to implementing changes to enable the return of the system to its baseline state and maintain itself in the high utility baseline attractor basin following repeated perturbations. This cost, also called allostatic load, is the utility reduction associated with both a change in state and with alterations in the attractor basin that affect system responses following future perturbations. This added cost can increase the time course of the return to baseline or the likelihood of moving into a different attractor basin following a perturbation. Opposite to this is the system's resilience which influences its ability to return to the high utility attractor basin following a perturbation by increasing the likelihood and/or speed of returning to the baseline state following a stressor. This review paper is a qualitative systematic review; it covers areas most relevant for moving the stress and resilience field forward from a more quantitative and neuroscientific perspective.
Explanation:
During a normal reaction to a stressful event, muscles are moved to their maximum capacity, and sensitivity is increased.
What is Sensitivity?This is defined as the ability of an organism to respond to stimuli such as touch, sensation etc.
During exercise, sensitivity to substances such as insulin when glucose transport wears off helps to balance energy supply.
Read more about Sensitivity here https://brainly.com/question/8043930
When you are doing either a chest or a bounce pass where are your thumbs at the end of the
motion?
Answer:
yes
Explanation:
A city near the ocean experiences thunderstorms on a frequent basis. Which of these is the BEST explanation for this?
A.
The interactions of the waves with the landmass change the air pressure to cause thunderstorms.
B.
The cold fronts that form only over coastal areas cause thunderstorms.
C.
The amount of sunshine received by coastal areas causes thunderstorms.
D.
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
Answer:
d
Explanation:
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms. So, option D is correct.
What is meant by heat energy ?Heat energy of a system is defined as the energy transferred between the molecules due to the temperature difference between them. Heat energy is the energy responsible for the temperature of the molecules.
Here,
A city near the ocean experiences thunderstorms on a frequent basis. This is because,
The atmosphere near to the land is highly humid and warm and thus creates a relatively low pressure in the land. In order to balance the pressure variation the air from the oceans make movements towards the land, and as a result, sea breeze are formed. During the evenings when the water in the ocean is more warm and when land begins to cool, the air from land rushes towards the sea, in order to balance the pressure variation occurred here. This makes the air above the ocean highly humid and thus would lead to the formation of thunderstorms.
Hence,
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
To learn more about heat energy, click:
https://brainly.com/question/29210982
#SPJ2
student c precise or accurate darts
Answer:
i don't get it
Explanation:
Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. This is an example of. _______ Weathering
Answer:
Chemical.
Explanation:
Weathering can be defined as the physical and chemical breakdown of rock into smaller pieces called sediment. Weathering can be classified into two categories namely;
I. Physical weathering : it is the process of breaking rocks into pieces without affecting its chemical composition e.g temperature, abrasion and frost action.
II. Chemical weathering : it is the process of breaking rocks into pieces by chemical action which leads to changes in its chemical composition e.g carbonation, hydration, plant acid and oxidation.
In this scenario, Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. Thus, this is an example of chemical weathering
What is sin for the given right triangle?
8.6 meters
5 meters
6.99 meters
A. l0.71
B. 0.81
C. 0.58
D. 1.72
Answer:
C
Explanation:
sin of a right triangle is opposite divided by hypotenuse
in this case, that is 5/8.6 = 0.581395349
you can easily remember the trig functions with this acronym:
SOH-CAH-TOA
S: Sine
O: Opposite
H: Hypotenuse
C: Cosine
A: Adjacent
H: Hypotenuse
T: Tangent
O: Opposite
A: Adjacent
Explanation:
sin = Mp /0P
sin = 5/8,6
sin = 0,58
When an object is raised vertically, work is done against __________. What one word completes the sentence?
please help quickly!!
When an object is raised vertically, work is done against _gravitational force _________
What is gravitational force ?The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies near its surface is called gravitational force .
On every body there is a force acting named gravitational force which attracts the body downward .
If a object / body is thrown up it always comes downward if only gravitational force is acting on it which act due to earth's gravity .
When an object is raised vertically, work is done against _gravitational force _________
learn more about gravitational force :
https://brainly.com/question/12528243?referrer=searchResults
#SPJ2
Yanni just turned one. He loves to play with his cars and trucks. He can also name the animals he sees in books.
In which stage of development is Yanni?
childhood
infancy
adolescence
adulthood
a sports car has a mass of 1300kg.Starting from the rest the car generates a force of 4400 N.The frictional force opposing this motion is 280 N.What is the car’s acceleration
since the car moves, the force needed to move is greater than the frictional forces opposing it
a = 3.17m/s²
The acceleration of the car with a mass of 1300 kg which starts from rest generating a force of 4400 N and having a frictional force of 280 N is 3.17 m/s²
We'll begin by calculating the net force acting on the car. This can be obtained as follow:Force (F) = 4400 N
Frictional force (Fբ) = 280 N
Net force (Fₙ) =?Fₙ = F – Fբ
Fₙ = 4400 – 280
Fₙ = 4120 NThus, the net force acting on the car is 4120 N
Finally, we shall determine the acceleration of the car. This can be obtained as follow:Mass (m) = 1300 Kg
Net force (F) = 4120 N
Acceleration (a) =?Force = Mass × Acceleration
4120 = 1300 × a
Divide both side by 1300
[tex]a = \frac{4120}{1300}\\\\[/tex]
a = 3.17 m/s²Therefore, the acceleration of the car is 3.17 m/s².
Learn more: https://brainly.com/question/22800479
Is the speed of light constant throughout the universe.?
Answer:
It is a basic postulate of the theory of relativity that the speed of light is constant. This can be broken down into two parts: The speed of light is independent of the motion of the observer. The speed of light does not vary with time or place.
Explanation:
3. What is the power of a derby race car that uses a 50 N force to travel 20 meters in 10 seconds?
A. 1000 W
B. 100 W
C. 80 W
Two small, identical conducting spheres repel each other with a force of 0.020 N when they are 0.35 m apart. After a conducting wire is connected between the spheres and then removed, they repel each other with a force of 0.055 N. What is the original charge on each sphere
Answer:
why does anyone need to know
Explanation:
1 plus one = 69
if you ride a bike at 2 km/h and travel a total distance of 20km, how long willnit takr ( in second) you to teach your destination
Time = (20 km) x (1 hr/2 km) x (3,600 sec/hr)
Time = (20 x 1 x 3,600 km-hr-sec) / (2 km-hr)
Time = (20 x 1 x 3,600 / 2) (km-hr-sec / km-hr)
Time = 36,000 seconds
(That's 10 hours.)
What variables affect density weight,conductivity,color,volume, or mass
Answer:
Density is affected by volume and mass.
Explanation:
Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.
what is the potential energy the greatest in a roller coaster
Answer:
Gravitational potential energy is the greatest
Explanation
It is the highest point of a roller coaster.
Find the momentum of a 15 kg object traveling at 7 m/s
What is the momentum?
What equation did you use to solve?
Answer:
105 kg*m/s
Explanation:
p=mv
momentum=mass*velocity
momentum=15kg*7m/s
momentum=105kg*m/s
A woman stands still holding a 350 Newton bag (about 80 pounds) 2 meters off the ground. How much work does the woman do?
Answer:
700 Joules
Explanation:
What we know:
Force = 350 Newton
Distance = 2 meters
Work = ?
The formula for work is:
Work = force x distance
Plugging values into equation:
Work = 350 Newtons x 2 meters
Work = 700 Joules
I had the same question on the homework assignment with the answers provided:
a) It depends on how long she holds the bag
b) 350 Joules
c) none
d) 350 Newtons
The final answer would be c) none. The work done is 700 Joules. Hope this helps!
In 1976, a 53 kg helicopter was built in Denmark. Suppose this helicopter flew east with a speed of 60.0 m/s and the total momentum of the helicopter and pilot was 7,200 kg∙m/s to the east. What was the mass of the pilot?
Answer:
67 kg.
Explanation:
From the question,
Total momentum = (mass of the pilot+ mass of the helicopter)×velocity.
I = (m+M)v............................... Equation 1
Where I = Total momentum of the pilot and the helicopter, m = mass of the pilot, M = mass of the helicopter, v = velocity.
make m the subject of the equation
m = (I/v)-M.............................. Equation 2
Given: I = 7200 kg.m/s, v = 60 m/s, M = 53 kg.
Substitute these values into equation 2
m = (7200/60)-53
m = 120-53
m = 67 kg.
Hence the mass of the pilot is 67 kg
In which scenario is the greatest amount of work done on a wagon?
A force of 55 N moves it 8 m.
A force of 60 N moves it 6 m.
A force of 50 N moves it 5 m.
A force of 40 N moves it 10 m.
Answer:
The first scenario!
Explanation:
W=F*d
a) 55*8= 440J
b) 60*6= 360J
c) 50*5= 250J
d) 40*10= 400J
The scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.
What is Work done?Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;
W = F × d
Where F is force applied and d is distance travelled.
From the question;
A force of 55 N moves it 8 m
W = 55N×8m = 440N.m
A force of 60 N moves it 6 m.
W = 60N×6m = 360N.m
A force of 50 N moves it 5 m.
W = 50N×5m = 250N
A force of 40 N moves it 10 m.
W = 40N×10m = 400N.m
Therefore, the scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.
Learn more about work done: brainly.com/question/26115962
#SPJ2
Problem 05.086 - Water pumped from a lower reservoir to a higher reservoir Water is pumped from a lower reservoir to a higher reservoir by a pump that provides 21 kW of useful mechanical power to the water. The free surface of the upper reservoir is 45 m higher than the surface of the lower reservoir. If the flow rate of water is measured to be 0.03 m3/s, determine the irreversible head loss of the system and the lost mechanical power during this process. Take the density of water to be 1000 kg/m3. The irreversible head loss of the system is 26.35 m. The lost mechanical power in this process is kW.
Answer:
Lost Mechanical Power = 7.7565 KW
Head Loss = 26.35 m
Explanation:
First, we will find the useful mechanical power used to transport water to the higher reservoir:
[tex]P_{useful} = \rho ghV[/tex]
where,
P_useful = Useful mechanical Power = ?
ρ = density of water = 1000 kg/m³
g = acceleration due to gravity = 9.81 m/s²
h = height = 45 m
V = Volume flow rate = 0.03 m³/s
Therefore,
[tex]P_{useful} = (1000\ kg/m^3)(9.81\ m/s^2)(45\ m)(0.03\ m^3/s)\\P_{useful} = 13243.5\ W = 13.2435\ KW[/tex]
Now, the lost mechanical power will be:
[tex]Lost\ Mechanical\ Power = Total\ Mechanical\ Power - Useful\ power\\Lost\ Mechanical\ Power = 21\ KW - 13.2435\ KW\\[/tex]
Lost Mechanical Power = 7.7565 KW
Now, for the head loss:
[tex]Lost\ Mechanical\ Power = \rho g(Head\ Loss)V\\Head\ Loss = \frac{Lost\ Mechanical\ Power}{\rho gV} \\\\Head\ Loss = \frac{7756.5\ W}{(1000\ kg/m^3)(9.81\ m/s^2)(0.03\ m^3/s)} \\[/tex]
Head Loss = 26.35 m
TAKING 100 PONTS!!! PLEASE SOMEONE HELP.JUST LOOK THE PICTURE
Explanation:
oh no i hope i dont fall and the i agree with the other dude
Answer: Okay, thanks I really appreciate the generosity.