Answer:
P₂ = 3.19 atm
Explanation:
Given data:
Initial volume = 700 mL
Initial pressure = 1 atm
Initial temperature = 273K
Final temperature =100°C (100+273= 373 K)
Final volume = 300 mL
Final pressure = ?
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
P₂ = P₁V₁ T₂/ T₁ V₂
P₂ = 1 atm × 700 mL × 373K / 273 K ×300 mL
P₂ = 261100 atm .mL. K /81900 K .mL
P₂ = 3.19 atm
Please help will give brainliest
Answer:
the answer id D
Explanation:
i dont know im just living here 5
Please help Fast i dont Know
Plz help
Plz and thank u
PLEASEEE HELP ?!?!?!
which of the following processes provide evidence of the particulate nature of matter
I. Diffusion
II. Filtration
III. Osmosis
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
Answer:
B
Explanation:
I think the answer is Diffusion and Osmosis
The processes that provide evidence of the particulate nature of matter would be diffusion and osmosis.
Matter is defined as anything with mass/weight and able to occupy space. Matters could be molecules of solid, liquid, or gases. The molecules of each category of matter have their specific characteristics.Molecules of liquids and gases are able to diffuse. Diffusion is defined as the movement of molecules from the region of high concentration to the region of low concentration. Molecules of solids in the dissolved form are also able to diffuse. Water molecules are also able to move from the region of high to the region of low water potentials by osmosis in the presence of a semi-permeable membrane.Thus, both diffusion and osmosis back up the particulate nature of matter.
More on the particulate nature of matter can be found here: https://brainly.com/question/15230454?referrer=searchResults
Please answer it truthfully please
Answer:
False
Explanation:
Chemical and Physical changes happen uniquely, they cannot happen at the same time. When you crumble a piece of paper you don't change its chemical form you change its physical form. When a piece of metal rusts its chemical composition changes, leading me to believe it is false.
Good luck on the rest of your assignment/test!
Giselle is working with a chemical substance in a laboratory. She observes that when the chemical is heated, it gives off a gas. She assumes that the gas is oxygen but decides to test this assumption to verify it. Which type of scientific knowledge is Giselle’s assumption? A. fact B. hypothesis C. law D. observation E. theory
Answer:
The correct answer is B. Hypothesis
Explanation:
velocity is a ______ quantity
Answer:
vector quantity
Explanation: Brainliest pls
What is electronegativity?
Explain the periodic trend -
what is it, why is it that way
Answer:
Electronegativity is a measure of the tendency of an atom to attract a bonding pair of electrons. The Pauling scale is the most commonly used. Fluorine (the most electronegative element) is assigned a value of 4.0, and values range down to caesium and francium which are the least electronegative at 0.7.
Explanation:
Major periodic trends include: electronegativity, ionization energy, electron affinity, atomic radius, melting point, and metallic character. ... These trends exist because of the similar atomic structure of the elements within their respective group families or periods, and because of the periodic nature of the elements
Which three are advantages of asexual reproduction?
A:Offspring are more likely to survive environmental changes.
B:Some offspring are more likely to survive a disease.
C:Less energy is required to reproduce.
D:The population can increase from only one parent.
E:The population can increase quickly.
Answer:
sorry if I get this wrong I think it is C
Explanation:
Determine the pH of a 2.0 x 10-2 M Sr(OH)2 solution.
pH of the Sr(OH)₂ solution : 12.6
Further explanationpH is the degree of acidity of a solution that depends on the concentration of H⁺ ions. The greater the value the more acidic the solution and the smaller the pH.
pH = - log [H⁺]
Sr (OH) ₂ solution is a base with valence 2, so we determine the pOH from the OH ion concentration - which is expressed by pOH = - log [OH -]. After that we determine the pH value from the relationship:
[H⁺] [OH⁻] = Kw=10⁻¹⁴
pH + pOH = 14
Sr(OH)₂⇒Sr²⁺+2OH⁻
From equation [Sr(OH)₂] : [OH⁻]=1 : 2, so [OH⁻]=
[tex]\tt [OH^-]=2\times 2.10^{-2}=4.10^{-2}~M[/tex]
[tex]\tt pOH=-log[OH^-]\\\\pOH=-log~4.10^{-2}\\\\pOH=2-log~4\rightarrow 1.398 \\\\pH+pOH=14\\\\pH=14-1.398\\\\pH=12.6[/tex]
pH is the measurement of the concentration of hydrogen or hydronium ion in an aqueous solution. The pH of strontium hydroxide is 12.6.
What is pH?The pH is the potential of hydrogen or the negative log of its concentration.
First, calculate the pOH of strontium hydroxide by:
[tex]\begin{aligned} \rm pOH &= \rm - log [OH ^{-}]\\\\&= \rm -log [4\times10^{-2}]\\\\&= 1.398\end{aligned}[/tex]
Now, calculate pH from pOH as:
[tex]\begin{aligned}\rm pH &= 14 - \rm pOH\\\\&= 14 - 1.398\\\\&= 12.6\end{aligned}[/tex]
Therefore, 12.6 is the pH of strontium hydroxide.
Learn more about pH here:
https://brainly.com/question/10725749
about how much of the visible side of the moon is lit up during a full moon?
A. Three fourths
B. One fourth
C. None of it
D. All of it
Answer:
D
Explanation:
i learned this in elementary
Which pair of elements will form a covalent bond? A. Aluminium and Chlorine B. Carbon and Sulfur C. Lithium and Oxygen D. Potassium and Chlorine
Explanation:
Aluminum and chlorine form covalent bond.
Therefore,
Option A is correct✔
Help me if you know this pleaseeee
Answer:
help you with what?
Explanation:
For the reaction below, if the rate of appearance of Br2 is 0.180 M/s, what is the rate of disappearance of
NOBr?
2 NOBr(g) → 2 NO(g) + Br2(g)
a. –0.360 M/s
b. –0.090 M/s
c. 0.090 M/s
d. 0.180 M/s
e. 0.720 M/s
Answer:
–0.360 M/s
Explanation:
Describe how the periodic
table is organized and how
that organization increases
its usefulness (hint: think
about how the position of an
element in the table matters)
Answer:
Elements in the periodic table are arranged according to the increasing atomic number.
We can predict the chemical properties of an element by looking at it's position in the periodic table.
The concentration of CI ion in a sample of H,0 is 15.0 ppm. What mass of CI ion is present in 240.0 mL of H,0, which has a density of 1.00 g/mL?
Answer:
Mass of solute = 0.0036 g
Explanation:
Given data:
Concentration of Cl⁻ = 15.0 ppm
Volume of water = 240 mL
Mass of Cl⁻ present = ?
Solution:
1 mL = 1 g
240 mL = 240 g
Formula:
ppm = mass of solute / mass of sample ×1,000,000
by putting values,
15.0 ppm = (mass of solute / 240 g) ×1,000,000
Mass of solute = 15.0 ppm × 240 g / 1,000,000
Mass of solute = 0.0036 g
Robert makes a glass of tea and takes it outside with him. While outside, the thermal energy within the glass of tea is transferred to its surroundings. Based on this information, what else is happening within the glass of tea?
A.
The kinetic energy of the particles is increasing and the temperature is decreasing.
B.
The kinetic energy of the particles is increasing and the temperature is increasing.
C.
The kinetic energy of the particles is decreasing and the temperature is increasing.
D.
The kinetic energy of the particles is decreasing and the temperature is decreasing.
Answer:
A
Explanation:
i had answer it and it was A
Atoms of the same element can have different properties. ( true or false )
Answer:
Atoms of the same element have the same chemical properties. The only differences between atoms of the same element are the number of neutrons in the nucleus and the atomic weight of each isotope. false
Answer:
False
Explanation:
Different elements can have different properties, but not atoms of the same element
HELPPPPPPP
is this chemical or physical reaction
Answer:
Chemical reaction
Explanation:
It's creating a whole other substance
Pieces of DNA that pass genetic traits from parent to offspring
A. Phenotype
B. Gene
D. Allele
Answer:
gene
Explanation:
Which elements are considered metals? Non-metals? Metalloids?
The answer is in the photo.
Based on the principle of complementary colors, which colors or wavelengths of light would you expect to be most strongly absorbed by Cu2 ions?
Answer:
Red and Orange
Explanation:
Complementary colors are those colours located across from each other on a color wheel. If we look at the colour wheel attached to this answer, we will see various complementary colours shown.
A good look at the attached colour wheel reveals that blue Cu2+ ions absorbs light around the red and orange portions of the visible spectrum.
Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical equation:
(
)BaO2 + (
)H2SO4 → (
)H2O2 + (
)BaSO4
Answer:
1
1
1
1
Explanation:
the equation is balancing
How many moles of Fe2+ are there in a 2.0g sample that is 80% by mass of FeCl2?
The number of moles of [tex]Fe^{2+}[/tex] in the [tex]2.0g[/tex] sample of [tex]FeCl_{2}[/tex] is [tex]0.0157[/tex] moles.
The following points should be noted about the number of moles:
The number of moles of any substance can be calculated using the mass and molar mass of the substance. [tex]n = \frac{mass}{molarmass}[/tex], where n is the number of moles.Mass of the sample given as [tex]2.0g[/tex] and the molar mass of the sample as [tex]126.75g/mol[/tex].
Therefore, the number of moles of [tex]Fe^{2+}[/tex]is obtained by dividing the mass by the molar mass.
Hence the number of moles is obtained as [tex]0.0175[/tex] moles.
Learn more about the number of moles here:
https://brainly.in/question/22534630
which group or groups of atoms are the only atoms with f orbitals?
Answer:
Lanthanides and Actinides
Explanation:
Potassium Phthalate, KC8H604, is a main source of whistle fuel for many fireworks. A standard firework had 25g of potassium phthalate. Calculate the following:
The molar mass of the compound.
How many molecules of fuel there are
The number of moles of Carbon
Answer:
Explanation:
The given compound is:
KC₈H₆O₄
Mass of the compound = 25g
Molar mass of the compound
KC₈H₆O₄
Atomic mass of K = 39
C = 12
H = 1
O = 16
Molar mass of the compound = 39 + 8(12) + 6 (1) + 4(16)
= 205g/mol
Number of molecules of fuel there in:
Find the number of moles then convert this to number of molecules;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Number of moles = [tex]\frac{25}{205}[/tex] = 0.12mol
1 mole of a compound contains 6.02 x 10²³ molecules
0.12 mole of the phthalate will contain 0.12 x 6.02 x 10²³ =
7.34 x 10²²molecules
Number of moles of Carbon
1 mole of the phthalate contains 8 mole of carbon
0.12 mole of the phthalate will contain 0.12 x 8 = 0.96mole of carbon
please help me i will give brain list
Answer:
a. pentane = C5H12
b. Heptane = C7H16
c. Hexyne = C6H10
d. Octene = C8H16
e. Nonane = C9H20
Hope it helps.
1-pentene
Molecular Formula C5H10
Condensed Structural FormulaCH2=CH(CH2)2CH3
Melting Point (°C)–138
Boiling Point (°C)30
2- heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16, and is one of the main components of gasoline (petrol).
A biochemist carefully measures the molarity of magnesium ion in of cell growth medium to be . Unfortunately, a careless graduate student forgets to cover the container of growth medium and a substantial amount of the solvent evaporates. The volume of the cell growth medium falls to . Calculate the new molarity of magnesium ion in the cell growth medium. Be sure your answer has the correct number of significant digits.
Answer:
760 uM
Explanation:
A biochemist carefully measures the molarity of magnesium ion in 47, mL of cell growth medium to be 97 uM. Unfortunately, a careless graduate student forgets to cover the container of growth medium and a substantial amount of the solvent evaporates. The volume of the cell growth medium falls to 6.0 mL. Calculate the new molarity of magnesium ion in the cell growth medium Be sure your answer has the correct number of significant digits.
The problem here is that the amount of magnesium ion remains the same irrespective of the volume.
Amount of magnesium in the growth medium = molarity x volume
= 97 x [tex]10^{-6}[/tex] x 47 x [tex]10^{-3}[/tex] = 4.559 x [tex]10^{-6}[/tex]
Then, the volume reduced to 6.0 mL, the new molarity becomes;
molarity = mole/volume
= 4.559 x [tex]10^{-6}[/tex]/6 x [tex]10^{-3}[/tex] = 7.598333 x [tex]10^{-4}[/tex] M = 759.83333 uM
To the correct number of significant digits = 760 uM
True or False: Most metals are found to occur naturally in their uncombined states.
Answer:
I think it's true. But I'm not sure
Answer:
True
Explanation:
which 2 not one 2! hjmdnxhjund
Answer:
A and D then I guess
Explanation:
sorry hope this helps!