A drone flies 8 m/s due East with respects to the wind. The wind is blowing 6 m/s due North with respects to the ground. What is the speed of the drone with repeat to the ground? A. 14m/s B. 10m/s C. 2m/s D. 20m/s

Answer:

Archimedes' principle states that the upward buoyant force that is exerted on a body immersed in a fluid, whether fully or partially submerged, is equal to the weight of the fluid that the body displaces.

Explanation:

PE=mgh

5=m(9.8)(2)

m=5/19.6

m=0.2251 kg

m=225.1 grams

Answer:

C, slightly less than 243 N

Explanation:

Road friction and air resistance aren't that much on a force. Try pushing something and see how much friction there is. Not that much.

a car moving at a speed shows that the force applied to the car is greater than the frictional force and air resistance

c. Slightly less than 243 N.

Answer: A) It's a normal force exerted by the floor. It balances out the gravitational force.

The normal force pushes up which means the box doesn't go through the floor. The up and down forces are balance. If the normal force was larger than the gravitational force, then the box would be pushed up and float/jump in the air. But the box is stationary and not moving, so that's why we don't have any acceleration and the forces effectively cancel each other out. In a way you can think of it like a see-saw.

Friction would only come into play if you applied a force and were trying to move the box. Friction counteracts the applied force. If you push the box to the left, then the friction would push to the right. Friction slows down the box and it allows it to not slide forever.

.•♫•♬•You're using classroom app me too•♬•♫•.

.•♫•♬•wow it's amazing •♬•♫•.

▀▄▀▄thank you BTS✨✨✨✨▄▀▄▀

Is normal force equal to gravity?

The normal force on an object at rest on a flat surface is equal to the gravitational force on that object.

▀▄▀▄Is friction a gravitational force?

Friction is the resistance to motion of one object moving relative to another. It is not a fundamental force, like gravity or electromagnetism. Instead, scientists believe it is the result of the electromagnetic attraction between charged particles in two touching surfaces.

▀▄▀▄Can normal force be greater than gravity?

Can you imagine the situation when Normal force is greater than mg ? Yes. When an additional downward force F is applied to a mass m resting on a horizontal surface, the normal force is FN=F+mg. ... An example is the normal force on an incline plane with an angle of θ due to a mass m.▄▀▄▀▄▀▄

What is the direction of the force you applied?

An applied force is an interaction of one object on another that causes the second object to accelerate or change velocity or direction. The force can be a push, pull, or drag. The resulting direction of an object depends on the relative direction of the force on the object. A force equation is F = ma.

The periodic time of the campus shuttle is = 1 sec

The periodic time is also known as  revolution per second is the time it takes object in motion ( revolving ) to pass through a point twice ( usually the starting position ) of the object and it calculated as :

For a simple pendulum = 2π√L/g

But a campus shuttle bus in motion

since it takes

1 revolution = 1 sec therefore the time period is = 1 sec

Hence we can conclude that the periodic time of the campus shuttle = 1 second.

Learn more about time period : https://brainly.com/question/25699025

The knot is in equilbrium, so there is no net force acting on it. Starting with the unknown force and going clockwise, denote each force by F₁, F₂, F₃, and F₄, respectively. We have

F₁ + F₂ + F₃ + F₄ = 0

Decomposing each force into horizontal and vertical components, we have

F cos(180º - α) + (5.7 N) cos(50º) + (6.2 N) cos(-44º) + (6.7 N) cos(-137º) = 0

F sin(180º - α) + (5.7 N) sin(50º) + (6.2 N) sin(-44º) + (6.7 N) sin(-137º) = 0

Recall that cos(180º - x) = - cos(x) and sin(180º - x) = sin(x), so these equations reduce to

F cos(α) ≈ - 3.22 N

F sin(α) ≈ 4.51 N

(1) Recall that for all x, sin²(x) + cos²(x) = 1. Use this identity to solve for F :

(F cos(α))² + (F sin(α))² = F ² ≈ 30.73 N²   →   F ≈ 5.5 N

(2) Use the definition of tangent to solve for α :

tan(α) = sin(α) / cos(α) ≈ 1.399   →   α ≈ 126º

or about 54º from the horizontal from above on the left of the knot.

(a) The magnitude of the force F acting on the knot is 5.54 N.

(b) The angle α of the force F is 54.4⁰.

The given parameters:

The net vertical force on the knot is calculated as follows;

[tex]F_y = Fsin(\alpha) + 5.7 sin(50) - 6.2 sin(44) - 6.7 sin(43)\\\\F_y = F sin(\alpha) -4.51\\\\Fsin(\alpha) = 4.51[/tex]

The net horizontal force on the knot is calculated as follows;

[tex]F_x = -F cos(\alpha) + 5.7 cos(50) + 6.2cos(44) - 6.7cos(43)\\\\F_x = -Fcos(\alpha) + 3.22\\\\Fcos(\alpha) = 3.22[/tex]

From the trig identity;

[tex]sin^2 \theta + cos^ 2 \theta = 1\\\\[/tex]

[tex](Fsin(\alpha))^2 + (Fcos(\alpha))^2 = (4.51)^2 + (3.22)^2\\\\F^2(sin^ 2\alpha + cos^2 \alpha) = 30.71\\\\F^2(1) = 30.71\\\\F = \sqrt{30.71} \\\\F = 5.54 \ N[/tex]

The angle α of the force F is calculated as follows;

[tex]Fsin(\alpha) = 4.51\\\\sin(\alpha) = \frac{4.51}{F} \\\\sin(\alpha ) = \frac{4.51}{5.54} \\\\sin(\alpha ) = 0.814\\\\\alpha = sin^{-1}(0.814)\\\\\alpha = 54.5 \ ^0[/tex]

Find the image uploaded for the complete question.

Learn more about net force here:https://brainly.com/question/12582625

Answer:

There is a difference between the words 'drops' and 'throws'

If an object is dropped, it's initial velocity is 0 but if the same object is thrown, it has some initial velocity

Since 'the sister' DROPS the keys, the initial velocity will be 0 m/s

We are given:

u=0 m/s

s = 4.3 m

a = 9.8 m/s/s (gravity)

From the third equation of motion:

v² - u² = 2as

Replacing the known values

v² - (0)² = 2(9.8)(4.3)

v² = 84.28

v = 9.2 m/s (approx)

Hence, the final velocity of the keys is 9.2 m/s

The final speed of the second puck is 5 m/s.

Speed can be defined as the rate of change of distance with respect to time.

To calculate the final speed of the second puck, we use the formula below.

Formula:

Where:

Make v' the subject of the equation

Assuming,

From the question,

Given:

Substitute these values into equation 2

Hence, The final speed of the second puck is 5 m/s.

Learn more about speed here: https://brainly.com/question/6504879

Answer:

It depends on the location of the ball during the motion. The string tension are approximately 3.82 N (at the lowest point), 3.06 N (at the highest point), and 3.44 N (at the horizontal point).

Explanation:

Tension in the String can be determined by the Newton's 1st Law of Motion (The ball shouldn't be escaped from the trajectory). The value of [tex]\theta[/tex] indicates the angle that is measured from the vertical lines and the rope of length R)

[tex]\sum F=0\rightarrow \frac{mv^{2}}{R}+mg\cos\theta-T=0[/tex]

[tex]T=mg\cos\theta+\frac{mv^{2}}{R}[/tex]

[tex]T=(38\times10^{-3})(10)(\cos\theta)+(38\times10^{-3})\frac{2^{2}}{0.21^{2}}=0.38\cos\theta+3.44[/tex]

When the ball is at the lowest point, the value of angle [tex]\theta=0[/tex], so the string tension is approximately 3.82 N. If the ball is at the highest point the value of [tex]\theta=180^{0}[/tex], so the string tension is approximately 3.06 N, and at the horizontal point [tex]\theta=90^{0}[/tex], so the string tension is approximately 3.44 N.

Answer:The current focus of climate science involves carbon dioxide (CO2)emissions. Carbon dioxide in the atmosphere acts as a blanket over the planet by trapping long wave radiation, which would otherwise radiate heat away from the planet. As the amount of carbon dioxide increases, so will its warming effect.

Explanation:

The light ray ; ( C ) Bends away from the axis perpendicular to the surface between the materials

Snell's law states that the ratio of the sines of the angles of incidence is equal to the ratio of the refractive indexes of the materials surface through which the light rays pass through. therefore

As the light ray travels from a material with a higher index of refraction into a material with a lower index of refraction at the axis that is perpendicular to the surface which is in between the materials the light ray will bend away due to Snell's law .

Hence we can conclude that The light ray Bends away from the axis perpendicular to the surface between the materials.

Learn more about Index of refraction : https://brainly.com/question/10729741

Answer:

Elastic potential energy

Answer:

Elastic potential energy:  increases when you compress a spring.

Explanation:

three charged particals are located at the corners of an equil triangle shown in the figure showing let (q 2.20 Uc) and L 0.650

Answer:

Motion with constant velocity of magnitude 1 m/s (uniform motion) for 4 seconds in a positive direction and then for 2 seconds uniform motion with constant velocity of magnitude 3 m/s in reverse direction .

Explanation:

The graph shows a constant velocity of 1 m/s for 4 seconds in the positive direction. After that, between 4 seconds and 6 seconds, the object reverses its motion with constant velocity of magnitude 3m/s.

Answer:

A. right before it hits the ground.

Explanation:

because all the way down, it is building kinetic energy.

Answer:

First option, third option, fourth option, and the fifth option.

Explanation:

Kinetic energy is energy an object has when it's motion, the greater the speed the greater the kinetic energy. For example, a car moving and increasing in speed is kinetic energy since the object is in motion. If the car stops and parks in a parking lot that is potential energy. Potential energy is the amount of energy an object has when it's at rest or not in motion.

So, the answer for this question is as followed first option or "energy can be stored in the position of an object." Third option or "Energy can be stored in the position of the particles that make up a substance." Fourth option or "Energy exists as movement of the particles of a substance." The last answer will be the fifth option or "Energy is greater in faster-moving particles than in slower-moving particles."

Hope this helps.

Explanation:

Glomar Challenger studies about the "age of rocks in various places in the ocean" in 1968. EXPLANATION: Glomar Challenger was a "deep sea research vessel" for marine geology and oceanography studies.

I hope this helps you :)

Answer:

c no cappp :)

Explanation:

Answer: A : 250 is the answer

B; The frequency of a wave is the number of complete oscillations (cycles) made by the wave in one second.

Instead, the wavelength is the distance between two consecutive crests (highest position) or 2 troughs (lowest position) of the wave.

In this problem, we are told that the leaf does two full up and down bobs: this means that it completes 2 full cycles in one second. Therefore, its frequency is

where  is called Hertz (Hz). So, the correct answer is

Explanation:

#Wavespeed

#1

[tex]\\ \rm\Rrightarrow v=\nu\lambda=500(3)=1500m/s[/tex]

#2

[tex]\\ \rm\Rrightarrow v=2(0.4)=0.8m/s[/tex]

#Wavelength

#1

[tex]\\ \rm\Rrightarrow \lambda=\dfrac{v}{\nu}=\dfrac{3}{2}=1.5m[/tex]

#2

[tex]\\ \rm\Rrightarrow \lambda= \dfrac{1450}{40000}=0.03625m[/tex]

#Frequency

[tex]\\ \rm\Rrightarrow \nu=\dfrac{v}{\lambda}=\dfrac{8}{20}=0.4Hz[/tex]

#2

[tex]\\ \rm\Rrightarrow \nu=\dfrac{3\times 10^8}{15\times 10^{-2}}=0.2\timee 10^{10}=2\times 10^9Hz[/tex]

Answer:

incident 50°

reflection 90°

refraction 20°

Answer:

8.8 kN

Explanation:

V = 2 m³, W = 40 kN, SG = 1.59

Bouyant force N = 1.59 * 1000 kg/m³ * 9.81 N/kg * 2 m³ = 31.2 kN

So the weight becomes 40 - 31.2 = 8.8 kN

The acceleration due to gravity is 9.8 m/s^2.

Answer:

  orbiting the Sun in an elliptical orbit

Explanation:

When orbits are circular, the center and the focus are the same point. For an elliptical orbit, the orbited object is at one focus of the ellipse. Kepler found planetary orbits to be elliptical with the sun at one focus.

__

As with a lot of scientific theories, it only explained some of the motion. As with a lot of scientific theories, explaining the discrepancies resulted in new discoveries.

Answer:

at one focus of the elliptical orbit of the planets.

Answer:

a

 [tex]v_r =8.65 \ ft/s [/tex]

b

  [tex] W_{1-2} =  3.24 \  ft \cdot lb[/tex]

Explanation:

From the question we are told that

  The mass of the ball is [tex]m  =  4 \  lb[/tex]

  The radius is  [tex]r= 3 \  ft[/tex]

   The speed is [tex]v_B_1  =  4.8 \ ft /s[/tex]

    The speed of the attached cord is  [tex]v_c =2.2 \  ft[/tex]

   The position that is been considered is  [tex]r_1 =  2 \  ft[/tex]h

Generally according to the law of angular momentum conservation

   [tex]L_a =  L_b[/tex]

Here [tex]L_a[/tex] is the initial  momentum of the ball which is mathematically represented as

      [tex]L_a  =  m*  v_B_1 *  r[/tex]

while  

[tex]L_b[/tex] is the  momentum of the ball  at  r =  2 ft which is mathematically represented as

       [tex]L_a  =  m*  v_B_2 *  r_1[/tex]

So

      [tex]m*  v_B_1 *  r = m*  v_B_2 *  r_1[/tex]

=>      [tex] 4.8 *  3 =  v_B_2 *  2[/tex]

=>     [tex]   v_B_2 =  7.2 \  ft/s [/tex]

Generally the resultant velocity of the ball is  

      [tex]v_r = \sqrt{v_B_2^2 + v_B_1^2   }[/tex]

=>   [tex]v_r = \sqrt{7.2^2 + 4.8^2   }[/tex]

=>   [tex]v_r =8.65 \ ft/s [/tex]

Generally according to equation for principle of work and energy we have that

    [tex]K_1 + \sum W_{1-2} = K_2[/tex]

Here [tex]K_1[/tex] is the initial kinetic energy of the ball which is mathematically represented as

[tex]K_1  =  \frac{1}{2}  *  m* v_B_1^2[/tex]

While  [tex]\sum W_{1-2}[/tex] is the sum of the total  workdone by the ball

and  [tex]K_2[/tex] is the final kinetic energy of the ball  which is mathematically represented as  [tex]K_2  =  \frac{1}{2}  *  m* v_r^2[/tex]

So

     [tex]\sum W_{1-2} =  \frac{1}{2}  *  m  (v_r^2  -  v_B_1^2)[/tex]

Here  m is the mass which is mathematically represented as

     [tex]m = \frac{W}{g}[/tex] here W is the weight in  lb and  g is the acceleration due to gravity which is [tex]g =  32 \ ft/s^2[/tex]

So

    [tex]\sum W_{1-2} =  \frac{1}{2}  *  \frac{4}{32} *   (8.65^2  -  4.8^2)[/tex]

=>   [tex] W_{1-2} =  3.24 \  ft \cdot lb[/tex]

Answer:

h = 2.49 [m]

Explanation:

In order to solve this problem we must use the definition of potential energy, which tells us that energy is equal to the product of mass by gravity by height.

The potential energy can be calculated by means of this equation:

Ep = m*g*h

where:

Ep = potential energy = 980 [J]

m = mass = 40 [kg]

g = gravity acceleration = 9.81 [m/s^2]

h = elevation [m]

Now replacing:

980 = 40*9.81*h

h = 2.49 [m]

Answer:

V2 = 15.53 [m/s]]

Explanation:

In order to solve this problem we must use the principle of energy conservation, where potential energy is transformed into kinetic energy. At the bottom is taken as a reference level of potential energy, where the value of this energy is equal to zero.

Above the inclined plane we have two energies, kinetics and potential. While when the sled is at the reference level all this energy will have been transformed into kinetic energy.

[tex]E_{1}=E_{2}\\ m*g*h+(\frac{1}{2} )*m*v_{1} ^{2}=\frac{1}{2}*m*v_{2} ^{2} \\(9.81*8.21)+(0.5*8.96^{2} )=(0.5*v_{2}^{2} )\\(0.5*v_{2}^{2} )=120.68\\v_{2} ^{2}=241.36\\v_{2} =\sqrt{241.36}\\ v_{2} =15.53[m/s][/tex]

Answer:

be in front of the club

Explanation:

The ball should be highest off the ground for a driver. The general recommendation is that the bottom of the golf ball on a tee should be level with the top of the driver; for long and mid-irons, push the tee into the ground so that only about a quarter-inch is above ground.

Answer:

[tex]OA. \: O \: seconds \: to \: 3 \: seconds[/tex]

Answer:

Weight Density 1 = 38100 N/m³

Weight Density 2 = 38100 N/m³

b. Yes

Explanation:

The formula for volume of cylinder is:

V = πr²l

where,

V = Volume

r = radius

l = length of cylinder

So, if length has the 3 significant figures which is least in all values, Then the volume must also be in 3 significant figures. The formula for weight density is:

Weight Density = Weight/Volume

Here, the volume has the least significant figures of 3, therefore, the weight densities must also have 3 significant figures:

Weight Density 1 = 38119 N/m³

Weight Density 1 = 38120 N/m³

Weight Density 1 = 38100 N/m³

Weight Density 2 = 38119 N/m³

Weight Density 2 = 38120 N/m³

Weight Density 2 = 38100 N/m³

Hence, the answer is:

b. Yes