A solution that contains less than the amount of solute that would be dissolved at equilibrium is considered to be

Answer:one mole of gold

Answer:

Fe is the excess reactant

Reaction yields are the amount of the reactant and the products of a chemical reaction. In the reaction between iron and oxygen, iron is the excess agent.

The reactant present in an extra quantity than the other reactant in a chemical reaction which reacts with the limiting reactant is called an excess reactant.

In a reaction mixture, the excess reactant is present even when the limiting agent is completely consumed.

The chemical reaction between iron and oxygen is shown as,

[tex]\rm 4 Fe(s) + 3 O_{2}(g) \rightarrow 2 Fe_{2}O_{3}[/tex]

From the reaction, it can be said that oxygen is a limiting reagent that limits the formation of iron (iii) oxide.

Therefore, iron is an excess reactant.

Learn more about excess and limiting reagents here:

https://brainly.com/question/13285193

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

Answer:

The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.

But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.

Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.

I hope this helps have a great day :)

Answer:

Cr

Explanation:

Cr goes from +3 to +6 and when it increases it means is being oxidized.

The element being oxidized in the redox reaction is Cr. Oxidation state helps to determine the amount of oxidation which an atom undergoes. An increase in oxidation state or number signifies oxidation has taken place.

A decrease in oxidation state depicts reduction has taken place. In this

scenario, the element Cr has a change in oxidation state from +3 to +6 which

signifies oxidation took place in the atoms of the element. This is why Cr will

be the right option.

Read more on https://brainly.com/question/25653911

Answer:

The answer is D.

Explanation:

Methane (CH4) is a non-polar hydrocarbon molecule made of a single carbon atom and four hydrogen atoms. It is found in nature in the form of natural gas. It is non-polar because the difference in electronegativities between carbon and hydrogen is not sufficient to produce a polarized chemical connection between these two elements.

The methane molecule has a tetrahedral structure in terms of molecular geometry. Because the molecule is not planar, the angles between the H-C-H bonds are 109.5°, which is more than the 90° that they would be if the molecule were planar.

Explanation:

tetrahedral, non polar

Answer:

solution

Explanation:

solvent +solute =solution

[tex]pH = -\log[H^{+}] \\\\\implies \log[H^{+}] = -pH\\\\\implies [H^{+}] = 10^{-pH}\\\\\implies [H^{+}] = 10^{-4.83} = 0.000015[/tex]

Answer:

B.

Explanation:

Hope this helpssss

<33

Answer:

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The properties of the products are different from those of the reactants.

I hope this helps.

The freezing point of the solution is - 0.12 oC.

We know that;

ΔT = K m i

ΔT = Freezing point depression

K = Freezing constant

m = molality

i = Van't Hoff factor

Number of moles of sucrose= 2.23g/342 g/mol = 0.0065 moles

Mass of solvent in Kg = 0.1 Kg

Molality of the solution = 0.0065 moles/ 0.1 Kg = 0.065 m

Now;

ΔT = 1.86 oC/m × 0.065 m × 1

ΔT = 0.12 oC

Freezing point of pure water = 0 oC

Freezing point of solution =  0 oC -  0.12 oC = - 0.12 oC

Learn more: https://brainly.com/question/2292439

Answer:

c

c

c

c

c

c

c

c

c

c

c

c

c

c

c

c

cc

c

c

c

c

c

c

c

c

c

ccc

c

c

c

c

c

c

c

c

c

c

c

c

c

c

c

c

c

cc

c

c

c

AMOUNG US AND THE ANSWER IS C

Explanation:

Answer:

its c

Explanation:

AnswerExplanation:I finsished d

Answer:

17.55L

Explanation:

0.48mol : 11.7

0.72mol :   x

0.48x = 8.424

x = 17.55

Explanation:

gravity

kinetic energy

less than

friction resists the ball's movement

2.0 m/s

change its direction

speed

newton's first law

dump truck

position

Answer:

Q1 - Gravity

Q2 - Kinetic Energy

Q3 - Less than

Q4 - Friction resists the ball's forward motion

Q5 - 2 m/a

Q6 - Change its speed

Q7 - Speed

Q8 - Second law

Q9 - a dump truck

Q10 - motion

I am not sure about some answers but I answered all questions.

This question is describing the following chemical reaction at equilibrium:

[tex]A\rightleftharpoons B[/tex]

And provides the relative amounts of both A and B at 25 °C and 75 °C, this means the equilibrium expressions and equilibrium constants can be written as:

[tex]K_1=\frac{90\%}{10\%}=9\\\\K_2=\frac{20\%}{80\%} =0.25[/tex]

Thus, by recalling the Van't Hoff's equation, we can write:

[tex]ln(K_2/K_1)=-\frac{\Delta H}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]

Hence, we solve for the enthalpy change as follows:

[tex]\Delta H=\frac{-R*ln(K_2/K_1)}{(\frac{1}{T_2} -\frac{1}{T_1} ) }[/tex]

Finally, we plug in the numbers to obtain:

[tex]\Delta H=\frac{-8.314\frac{J}{mol*K} *ln(0.25/9)}{[\frac{1}{(75+273.15)K} -\frac{1}{(25+273.15)K} ] } \\\\\\\Delta H=4,785.1\frac{J}{mol}[/tex]

Learn more:

Evidence that water was once present on a planet is evidence that the planet may once have had living organisms. When landforms on different rocky planets look similar, it is evidence that they may have been formed by the same geologic process. The channel on Mars may have been caused by flowing water or flowing lava.

Hopes this helps :)

Answer:

1.1 million pounds

Explanation:

Answer:

1.1 million pounds

Explanation:

that's a lot of water above us!!

[MnCl6] 3- is high spin and has five unpaired electrons while [Mn(CN)6] 3- has only two unpaired electrons.

A complex may be low spin or high spin depending on the kind of ligand attached to the central metal atom/ion. If the ligand is a weak field ligand, the complex may be high spin (maximum number of unpaired electrons). If the complex is low spin, there are few unpaired electrons (minimum number of unpaired electrons). In that case, the ligand is a strong field ligand.

In the octahedral geometry,  [MnCl6] 3- is high spin and has five unpaired electrons since the chloride ion is a weak field ligand. On the other hand  [Mn(CN)6] 3- has only two unpaired electrons because the cyanide ion is a strong field ligand.

Learn more: https://brainly.com/question/6111443

Answer: C

Explanation: trust me bro

Increase in temperature does not change the rate of collisions between particles in a reaction.

The collision hypothesis offers suggestions for how to alter the rate of a reaction as well as an explanation for why certain reactions occur at various rates.

According to the collision theory, for a chemical reaction to take place, the reacting particles must come into contact with one another. The frequency of collisions affects the reaction's rate. According to the idea, responding particles frequently encounter without reacting.

Any analysis of an ordinary reaction mechanism must start with this rule. It explains why there are so few termolecular reactions. According to the kinetic theory of gases, there will only be one instance in which three molecules collide at once out of every 1000 binary collisions.

Therefore,  Increase in temperature does not change the rate of collisions between particles in a reaction.

To learn more about Temperature, refer to the link:

https://brainly.com/question/20162899

#SPJ2

Answer:

The formula for Avagadro's law is V1/n1 = V2/n2, where V = volume and n = amount of gas (in moles).

Explanation:

The mole fraction of N₂ after the mixture of 4.0 L of N₂ at 15 atm with 4.0 L of H₂ at 7.0 atm is 0.68.

We can calculate the mole fraction of N₂ with the following equation:

[tex] X_{N_{2}} = \frac{n_{N_{2}}}{n_{t}} = \frac{n_{N_{2}}}{n_{N_{2}} + n_{H_{2}}} [/tex]   (1)

The number of moles of N₂ and H₂ can be found with the ideal gas law:

[tex] PV = nRT [/tex]

Where:

P: is the pressure

R: is the gas constant

T: is the temperature

V: is the volume

For nitrogen gas we have:

[tex] n_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{RT} [/tex]   (2)

And for hydrogen:

[tex] n_{H_{2}} = \frac{P_{H_{2}}V_{H_{2}}}{RT} [/tex]   (3)

After entering equations (2) and (3) into (1), we get:

[tex] X_{N_{2}} = \frac{\frac{P_{N_{2}}V_{N_{2}}}{RT}}{\frac{P_{N_{2}}V_{N_{2}}}{RT} + \frac{P_{H_{2}}V_{H_{2}}}{RT}} [/tex]  

Since RT are constants, we have:

[tex] X_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{P_{N_{2}}V_{N_{2}} + P_{H_{2}}V_{H_{2}}} [/tex]                

We know that:

[tex] P_{N_{2}} = 15 atm[/tex]                

[tex] V_{N_{2}} = 4.0 L[/tex]                

[tex] P_{H_{2}} = 7.0 atm[/tex]                

[tex] V_{H_{2}} = 4.0 L[/tex]          

so:

[tex] X_{N_{2}} = \frac{15 atm*4.0 L}{15 atm*4.0 L + 7.0 amt*4.0 L} = 0.68 [/tex]                

Therefore, the mole fraction of N₂ is 0.68.

Find more here:

https://brainly.com/question/4147359?referrer=searchResults

I hope it helps you!

The explanation to the question is stated as follows:

Newton's first law of motion states that: a body will continue in its state of rest or uniform motion unless an external force acts on it. So then, the ball initially possesses potential energy because it was at rest. While the leg of the soccer player possesses kinetic energy because its in motion.

Thus, when the player hits the ball, a force known as push has been applied. This would ensure that the ball compels and moves in the direction of the applied force. Therefore after the interaction, the leg of the player now possesses potential energy, since it would come to rest after hitting the ball. While the ball would start moving, now possessing kinetic energy.

Visit: https://brainly.com/question/12099288

The following properties change across the periodic Table from group 1 to group 2

Group 1 are alkali metals that have one valence electron in the outermost orbit whereas alkaline earth metals are in group 2 have two valence electrons in the outermost orbit.

a) Ionic radius:

b) Ionisation enthalpy:

c) Density:

d) Melting point:

e) Electropositive character:

Thus, changes in properties are:

Learn more:

https://brainly.com/question/19172241

Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.

First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pH + pOH= 14

In this case, being pOH= 9.50, pH is calculated as:

pH + 9.40= 14

pH= 14 - 9.50

pH= 4.50

Replacing in the definition of pH the concentration of H⁺ ions is obtained:

- log [H⁺]= 4.50

Solving :

[H⁺]= 10⁻⁴ ⁵

[H⁺]= 3.16×10⁻⁵ M

The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.

In this case, the pH has a value of 4.50. So, the solution is acidic.

In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.  

Learn more:

Answer: Evaporation and sublimation.

Explanation: Evaporation is the process of changing from liquid to gas, and sublimation is the process of changing from solid to gas.

-Sound waves transfer energy by the motion of particles.

Explanation:

These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.

Sound waves transfer energy by the motion of particles considered a type of mechanical energy.

Potential energy plus kinetic energy are combined to form mechanical energy. According to the concept of mechanical energy conservation, mechanical energy remains constant in an isolated system that is solely exposed to conservative forces.

The quantity of energy that a force transfers is known as mechanical work. It is a scalar quantity with joules as its SI unit, much as energy.

Since there are only microscopic forces generated by atomic collisions and no macroscopically quantifiable force, heat conduction is not regarded as a kind of work.

Transverse, longitudinal, and surface waves are the three different forms of mechanical waves. When the wave's energy goes through them, they behave differently in terms of how the medium's particles move.

Thus, option C is correct.

To learn more about mechanical energy follow the link;

https://brainly.com/question/1932868

#SPJ2